After putting Overcome v2.0.0 (Would the correct term be flashing?) on my Galaxy Tab, after about a week, I noticed that the haptic buttons had stopped working correctly. While the keys functions worked fine, the haptic feedback didn't respond like it normally did. Is this a problem with the ROM I installed?
EDIT: Rebooting the device seemed to fix the problem.
u said after a week , i doubt its a rom problem . if you wanna make sure go flash back to stock and check whether its a rom problem or hardware problem
Related
Hello guys,
I'm having a problem with my Galaxy S, I'm noob w/ Android. I read many users(not from here) saying that Lagfix really does a difference in performance, excited, I downloaded GST(Galaxy S Tweaker) and without root, instaled lagfix.
Now my Galaxy S is working, BUT, the home button stopped working and the back button is working as home button, also the camera stopped working, the touch became horrible, I can only connect to computer using Debug mode and everytime that I turn on the cellphone, appears I9000B and before appear the S logo it changes to I9000.
There's something that I can do?
I'm really desperate and don't care if lose data. I only wanna my Galaxy S working as it should be.
Eh. What's the name odd your device. Sounds like you installed lag fix for the international sgs
Sent from my GT-I9000
reflash it back to stock or flash another ROM made for the I9000 or I9000M instead of USA variants
Since i've update my SGS to android froyo the Proximity sensor stoped working and the position sensor taken 30sec to turn the image...
I've used the test mode code to check hardware error, but there everything is working perfectly...
If I put the Android 2.1 the problem doesn't show up.
Does anyone have the same problem or solution?
Nobody has this issue?
Is quite strange... because if i put a Android 2.1 ROM everything works just fine, but with later version of android the sensors still working (using test mode from SGS Tools, I confirmed that the sensors are just fine), but the system takes a huge time (~30sec) to do something...
Please, if anyone knows anything that could solve this problem, please say something!
I think that in the first week that I had Froyo everything warked fine, but I'm not sure...
Is there any way to do a complete reset and set everything to default values including Hardware settings?
I've already done Factory reset and Full factory reset, by CWM and Code.
Nobody??? Anything???
Is this a genuine samsung rom you are using .
A flashed rom or a genuine Kies updated firmware .
jje
I'm now using a ROM official (sam***gfirmwares.co*) flashed by ODIN.
Should I try use Kies?
No i was just trying to rule out a flakey rom .
My usual suggestion is a wipe via ODIN
http://forum.xda-developers.com/showthread.php?t=882014
But i would stop at Eclair and see if its solved the problem if OK upgrade further .
jje
Its the same thing...
Its quite awkward, because only apendds in Froyo...
why not try a custom froyo rom, head over to doc's kitchen and cook yourself one up. also try lagfix, and any other speed up tweaks. how does the phone respond normally ?? without the sensors ? is it quite speedy or does it lag ??
The phone work just fine but when i turn the phone it take a lot of time to twist the image... I can even still interact with the screen until it turns...
The proximity sensor takes a lot of time too...
No one else has this problem?
Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
problem solved. Close
rmsul said:
Hi? sorr for my eng.
Trouble:
i replaced the sens keys with mic and vibro, on phone fw was 4.1.1, key is work well, but after 2 day keys (back and home) don`t working hardware key - work ok.
What i do:
1. change fw to 2.3.5 and *#*#2663#*#* - when i do touch key fw update - phone go to reboot
2. change fw to 2.3.3 and *#*#2663#*#* - phone - faild to update
3. change fw to 2.2.1 and *#*#2663#*#* - phone - cycling and nothing to do ((
Click to expand...
Click to collapse
how??
rmsul said:
problem solved. Close
Click to expand...
Click to collapse
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
nears said:
Hi,
this sounds like my problem.
I have it on 2.3.6 after replacing the keypad because of water damage and wrong cleaning off the home-button...
I am searching for a solution quite a long time.
It would be great if you could post the problem solution here.
Thanks a lot.
Click to expand...
Click to collapse
:victory: :victory: :victory: :victory: :victory:
yeahaa... after 3 days of testing and testing i finaly made it ....
Well the trick with *#*#2663#*#* works only on froyo and not on any other stock rom...
So just get Froyo and after flashing it do a full wipe within the recovery menu. Afterwards boot and enter *#*#2663#*#* and update the TouchPad FW.
greets nears
Anxious to try FroYo
Same thing happened to me a week ago, the four touch keys across the bottom of my T989 suddenly stopped working for no apparent reason.
When I bought my T989 in Nov2011, I got it from a guy who bought it for his son, but his son decided he wanted an iPhone instead, so it was brand new BUT already rooted (juggernaut v3.1, CMR). It was running flawlessy until now. I hadn't done anything to it and was still running the same rom.
Over the past week I've gotten up to speed and I wiped it and flashed stock ICS 4.0.4 UVLH1 rom after which the keys functioned normally UNTIL Kies said there was newer firmware, and so I updated to that. I tried wiping and reflashing ICS in hopes the keys would work again and skip the Kies update, but this time the keys didn't work at all. I've had the phone apart to examine the hardware and (without removing the screen) everything appears perfect. I am still holding out hope that it's a software thing, not a hardware thing.
I tried the *#2663# code trick and pressed the "Touch Key FW Update" button, but it just stayed busy for the four hours I let it grind away (obviously not working).
So, noob question, does anyone know where I could find a stock Froyo rom for the T989? I've only seen it for the T959. I really want to try this and see if it gets my touch keys working again.
Thanks in advance.
hi friends need help .
Last night i rooted my galaxy note with cwm.tar recovery and superuser.
everything was working fine until i downloaded rom manager and did something, i dont remember (perhaps flashed rom ) and my device restarted after that my capacitve back button and menu button stopped working and lights are showing on always even i tried to disable it from setting. I flashed to stock rom ics and jelly bean but still problem not solved please help me friends. i sure its not hardware issue any suggestion ?
galaxy note shve160s.
OK here's you're first problem, this is not the thread for your device. Second you may need to use Odin to flash your original stock ROM. Your stock firmware can be found at www.sammobile.com or samfirmware.com. If that doesn't work it maybe a hardware problem. Next time search XDA for your phone's model number. This thread is for SGH-T879. Good luck. P.S. don't use ROM manager to flash CWM If your exact phone isn't listed. You're lucky you didn't brick your phone.
Sent from my SAMSUNG-SGH-T879 using xda app-developers app
thank you it didnt solved my problem perhaps its hardware related problem.. unlucky me
Hi Guys i'm new with you here u've just moved from the galaxy s II To this amazing phone but i have a problem is that vibration isn't working i've tried to update the phone to the latest official version (Android 4.4.4 KK) and still not working anyone can help here guys? :silly:
Galaxy pop Plus said:
Hi Guys i'm new with you here u've just moved from the galaxy s II To this amazing phone but i have a problem is that vibration isn't working i've tried to update the phone to the latest official version (Android 4.4.4 KK) and still not working anyone can help here guys? :silly:
Click to expand...
Click to collapse
Well, it should be working. I had the same problem when I bought this phone.
The main problem was, that every ROM version's from 4.1 to 4.4.4 version's wasn't compatible with vibration module. What was I doing to re-wake it?
Firstly, try some of these tricks:
1. Go straight to your service menu (in the dialer dial this code: *#*#7378423#*#*)
2. After that, go to the services tab and click on "Vibrate"
3. And lastly, push and hold any volume rockers button to wake-up your vibration module.
It worked whether I used this tricks.
As far as I can see, this problem doesn't appear on the lollipop (AOSP 5.0) version.
I hope my message will help you somehow
Thanks But It's Not Working
when i got my first Z the vibration died in a day or so, could be a hardware related problem.(i had no problems replacing it, just took a while for me to explain that it's hardware related)
try hard reset, deleting all data etc, if it doesnt work, i hope you got your warranty
LaurynasVP said:
Well, it should be working. I had the same problem when I bought this phone.
The main problem was, that every ROM version's from 4.1 to 4.4.4 version's wasn't compatible with vibration module. What was I doing to re-wake it?
Firstly, try some of these tricks:
1. Go straight to your service menu (in the dialer dial this code: *#*#7378423#*#*)
2. After that, go to the services tab and click on "Vibrate"
3. And lastly, push and hold any volume rockers button to wake-up your vibration module.
It worked whether I used this tricks.
As far as I can see, this problem doesn't appear on the lollipop (AOSP 5.0) version.
I hope my message will help you somehow
Click to expand...
Click to collapse
Next time please quote message, that can I see your answer.
As TorN-d- said before, you only 1 last chance - to reinstall your operating system. That can be done by using Sony PC Companion, which you can download straight from here: HERE
If it doesn't work, it may be that your phone has damaged vibration module which needs to be replaced