so i've been looking around, search/google etc and i can't seem to figure out how to format this partition with adb. you might say, just go to it in recovery, but i'm using amon RA instead of clockwork (restore bugs).
so if anyone was to enlighten me in to what exactly i would write in the command prompt, that would be of great help... thanks!
you could adb push erase_image and run it from adb shell
erase_image can be found in a rom.zip under /system/bin
or you could use fastboot erase system
rattking said:
you could adb push erase_image and run it from adb shell
erase_image can be found in a rom.zip under /system/bin
or you could use fastboot erase system
Click to expand...
Click to collapse
fastboot erase system doesn't seem to work...=\
are you s-on or is there another reason fastboot erase isn't working?
anyways the method i mentioned with erase_image goes
extract erase_image from a rom's .zip it is in /system/bin
in recovery
adb push erase_image /tmp
adb shell
cd /tmp
chmod +x erase_image
./erase_image system
hope this helps..
I used this on a s-on phone before to correct filesystem corruption
rattking said:
are you s-on or is there another reason fastboot erase isn't working?
anyways the method i mentioned with erase_image goes
extract erase_image from a rom's .zip it is in /system/bin
in recovery
adb push erase_image /tmp
adb shell
cd /tmp
chmod +x erase_image
./erase_image system
hope this helps..
I used this on a s-on phone before to correct filesystem corruption
Click to expand...
Click to collapse
yes i am on s-on... i'll try that as soon as i flash a new rom!
rattking said:
are you s-on or is there another reason fastboot erase isn't working?
anyways the method i mentioned with erase_image goes
extract erase_image from a rom's .zip it is in /system/bin
in recovery
adb push erase_image /tmp
adb shell
cd /tmp
chmod +x erase_image
./erase_image system
hope this helps..
I used this on a s-on phone before to correct filesystem corruption
Click to expand...
Click to collapse
keep getting bad blocks... =\ can someone point me in the way of s-off? yes yes i've used search but maybe you guys know some secrets i dont.
You can't get s-off on your phone. The equivalent on the Nexus One is unlocking the bootloader.
Only a very small number of N1's have the ability to s-off...
Related
I have Sprint signed 2.0 ruu and I have the phone rooted successfully.
My problem is this, when I try to flash the recovery image it says "file not found"
I've tried flashing from terminal on phone and from CMD on pc.
I have searched and searched with no luck.
please anyone help. Also how to use nand Restore what is the file that is being restored.
Also how to add removed apps from DC 2.0.72 rom step by step please.
Thanks
make sure debugging is turned on in the phone
settings>applications>development>usb debugging
Here is a guide that you can try
http://forum.androidcentral.com/htc-hero-roms-hacks/9542-how-repair-your-bootloader-after-using-2-1-ruu.html
or try these instructions
http://forum.xda-developers.com/showthread.php?t=583291
Theres some others you can do, but its a males it more difficult after doing the 2.1 RUU
Thanks for the reply
Still showing flash image not found
I tried those websites with no luck!! Does this not work after installing the 2.1 ruu?
C:\AndroidSDK\tools>adb shell
# su
su
# cd /sdcard
cd /sdcard
# flash_image recovery recovery-ra-heroc-v1.6.2-blue.img
flash_image recovery recovery-ra-heroc-v1.6.2-blue.img
flash_image: not found
# [1] Killed su
# exit
exit
C:\AndroidSDK\tools>adb shell
# su
su
# cd /sdcard
cd /sdcard
# flash_image recovery recovery-ra-heroc-v1.5.2.img
flash_image recovery recovery-ra-heroc-v1.5.2.img
flash_image: not found
# flash_image recovery recovery-RA-heroc-v1.5.2.img
flash_image recovery recovery-RA-heroc-v1.5.2.img
flash_image: not found
# exit
exit
# adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb: not found
#
joshuadb20 said:
I tried those websites with no luck!! Does this not work after installing the 2.1 ruu?
C:\AndroidSDK\tools>adb shell
# su
su
# cd /sdcard
cd /sdcard
# flash_image recovery recovery-ra-heroc-v1.6.2-blue.img
flash_image recovery recovery-ra-heroc-v1.6.2-blue.img
flash_image: not found
# [1] Killed su
# exit
exit
C:\AndroidSDK\tools>adb shell
# su
su
# cd /sdcard
cd /sdcard
# flash_image recovery recovery-ra-heroc-v1.5.2.img
flash_image recovery recovery-ra-heroc-v1.5.2.img
flash_image: not found
# flash_image recovery recovery-RA-heroc-v1.5.2.img
flash_image recovery recovery-RA-heroc-v1.5.2.img
flash_image: not found
# exit
exit
# adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb: not found
#
Click to expand...
Click to collapse
No that will not work. pm me and I will fix it with you on gtalk.
Since you ran the test ruu you do not have flash_image on your phone. You need to push flash_image to /system/bin/flash_image. I will attach it as a .zip below. Put the .zip in your sdk folder then follow these adb instructions to rename and push it:
Code:
adb remount
adb push flash_image.zip /system/bin/flash_image
Be sure to type it as above to correctly rename it..it is not really a .zip but XDA forces the rename to attach..
You have to give flash_image permission now, so type this:
Code:
adb remount
adb shell chmod 0755 /system/bin/flash_image
Now you should be able to flash the custom recovery if you have indeed rooted your phone and gave permissions to flash_image.
Thankyou thankyou thankyou
I love you guys, This fixed my issue, it drove me nutts all night last night.
Thank you very much!!! Your posting solved my all day issue, im happy :-*
C:\>cd androidsdk\tools\
C:\AndroidSDK\tools>adb shell
$ su
su
# cd /sdcard/
cd /sdcard/
# flash_image recovery recovery-ra-heroc-v1.2.3.img
flash_image recovery recovery-ra-heroc-v1.2.3.img
flash_image: not found
# adb remount
adb remount
adb: not found
#
I am having the same issue on my phone except I can't get the the flash_image file to even work. See above for example of my outcome. Am I not rooted fully? I am using universal androot and getting the Superuser icon and everything. Please help if you can. This is driving me crazy.
91nbtsi said:
...
# flash_image recovery recovery-ra-heroc-v1.2.3.img
...
Click to expand...
Click to collapse
Are you sure it is not named recovery-RA-heroc-v1.2.3.img ?
kjjjjshab said:
Are you sure it is not named recovery-RA-heroc-v1.2.3.img ?
Click to expand...
Click to collapse
I am pretty new to this, so it is case sensitive? I will try and see.
jeez guys. just plug your phone into your computer and drop the heroc-...img into your sdcard's root folder.
then:...\tools> adb shell
ls (to see what's in your current directory)
cd sdcard (to hop onto your sdcard)
su (if not already root)
flash_recovery recovery-.......3.img
reboot recovery
kjjjjshab said:
Are you sure it is not named recovery-RA-heroc-v1.2.3.img ?
Click to expand...
Click to collapse
It is the command "flash_image" that is not found - not the img file
I have the same problem - but in posting it I see that everyone is looking at the error as though it relates to9 the img file
91nbtsi said:
C:\>cd androidsdk\tools\
C:\AndroidSDK\tools>adb shell
$ su
su
# cd /sdcard/
cd /sdcard/
# flash_image recovery recovery-ra-heroc-v1.2.3.img
flash_image recovery recovery-ra-heroc-v1.2.3.img
flash_image: not found
# adb remount
adb remount
adb: not found
#
I am having the same issue on my phone except I can't get the the flash_image file to even work. See above for example of my outcome. Am I not rooted fully? I am using universal androot and getting the Superuser icon and everything. Please help if you can. This is driving me crazy.
Click to expand...
Click to collapse
Here is what you need to do
Code:
adb shell
cd sdcard
flash_image recovery xxxxxxxxxxxx.img
reboot recovery
You should not need to remount, but if you need to or for future reference you type in adb remount from the command prompt and not in adb shell
diogenesthesceptic said:
It is the command "flash_image" that is not found - not the img file
I have the same problem - but in posting it I see that everyone is looking at the error as though it relates to9 the img file
Click to expand...
Click to collapse
Read an earlier post, download the file and do what the post instructs. You need the flash_image file on your phone
danknee said:
Since you ran the test ruu you do not have flash_image on your phone. You need to push flash_image to /system/bin/flash_image. I will attach it as a .zip below. Put the .zip in your sdk folder then follow these adb instructions to rename and push it:
Code:
adb remount
adb push flash_image.zip /system/bin/flash_image
Be sure to type it as above to correctly rename it..it is not really a .zip but XDA forces the rename to attach..
You have to give flash_image permission now, so type this:
Code:
adb remount
adb shell chmod 0755 /system/bin/flash_image
Now you should be able to flash the custom recovery if you have indeed rooted your phone and gave permissions to flash_image.
Click to expand...
Click to collapse
Mine says "remount failed: Operation not permitted" when I try to remount.
LARPkitten said:
Mine says "remount failed: Operation not permitted" when I try to remount.
Click to expand...
Click to collapse
If you are in recovery and trying this you do not need to remount. If you are booted into Android try
Code:
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
you might also replace /dev/block/mtdblock3 with /dev/mtd/mtd1
and then chmod
I am having this problem as well.
Okay if your having a problem with the ole "flash_image not found" saying do this open up command prompt and type
Code:
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
then open up another command prompt with the old one still running and type this
Code:
adb push flash_image /bin
adb shell chmod 0755 /system/bin/flash_image
Now you should be good to flash your recovery
Asadullah said:
Okay if your having a problem with the ole "flash_image not found" saying do this open up command prompt and type
Code:
adb shell
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
then open up another command prompt with the old one still running and type this
Code:
adb push flash_image /bin
adb shell chmod 0755 /system/bin/flash_image
Now you should be good to flash your recovery
Click to expand...
Click to collapse
I'm getting all the same errors everyone else on here is getting. Is flash_recovery a file that is required? I don't mean the .img file, but is it some kind of command file?
first of all iv been trying to root my legend for hours and this is geting very furstarting... i am using the guide here http://forum.xda-developers.com/showthread.php?t=845512
i have finaly managed to get adb to work and have made my goldcard after 2 days of intense work and now im trying to downgrade my phone to root it
i am geting the following error in adb
when i type adb remount it says remount failed operation not permitted i have looked all over the net and found no answer
in additon to that when im trying to use adb push i type the following
adb shell
$su
su
#adb push flash_image /data/local/
adb push flash_image /data/local/
i just get the same line repeated how to excute commands from adb? this is very confusing since im noob with rooting also the following lines i don't know how to excute them too
adb push flash_image /data/local/
adb push misc1-2.img /data/local/
chmod 755 /data/local/flash_image
cat /dev/mtd/mtd0 > /sdcard/misc_backup.img
/data/local/flash_image misc /data/local/misc1-2.img
please explain to me how to use theese thanks!
That one is relatively easy. You could also follow Paul's guide but I like my approach better
Connect your phone to your PC. Second you have to install VISIONary r13 into your phone and do the "temproot" procedure. After a successful "temproot" you should be able to adb shell and then su. Fire up command prompt and issue:
adb shell
su
...you should have root privileges now (showing #). Next thing is backing up misc partition and replacing it with one from hack4legend-v5.zip. Extract this zip somewhere and fire another command promt there. Now you should upload flash_image binary and misc1-2.img:
adb push flash_image /data/local/
adb push misc1-2.img /data/local/
...switch back to 1st command prompt and change permission of flash_image_binary:
chmod 755 /data/local/flash_image
...and backup your current misc partition:
cat /dev/mtd/mtd0 > /sdcard/misc_backup.img
Now flash misc1-2.img:
Code:
/data/local/flash_image misc /data/local/misc1-2.img
exit
...and you are set to downgrade retaining HBOOT 1.00.
Click to expand...
Click to collapse
Read better, you have to open a new terminal for pushing the files to the phone, you can't use adb push while you are in adb shell.
BTW you should avoid posting questions in development section.
The attached ZIP includes scripts for Windows and Linux to backup your Galaxy Tab.
Linux users will need to install 7zip
Code:
sudo apt-get install p7zip
May also work on OSX but you're on your own with 7zip
You will need adb access to your tab whichever platform you use.
All you need to do to run it is extract the attached archive and run
Windows
Code:
skitzbackup.cmd
Linux / OSX
Code:
chmod a+x <folder where you extracted it>/skitzbackup/skitzbackup.sh
cd <folder where you extracted it>/skitzbackup
./skitzbackup.sh
The script will pull the following partitions and pack them in a 7zip archive for safe keeping:
efs
recovery
boot
system
radio
cache
misc
Before you ask, I have no idea what the 'misc' partition is. Haven't had time to explore that yet
I have NOT tested flashing these back as yet, except for boot and recovery so you use this entirely at your own risk.
DOWNLOAD HERE
View attachment skitzbackup.zip
Enjoy!
Code:
alias del=rm
mkdir skitzbackup
cd skitzbackup
adb shell su -c "dd if=/dev/block/mmcblk0p1 of=/sdcard/efs.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p2 of=/sdcard/recovery.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p3 of=/sdcard/boot.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p4 of=/sdcard/system.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p5 of=/sdcard/cache.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p6 of=/sdcard/misc.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p7 of=/sdcard/radio.img bs=4096"
adb pull /sdcard/efs.img
adb pull /sdcard/recovery.img
adb pull /sdcard/boot.img
adb pull /sdcard/system.img
adb pull /sdcard/cache.img
adb pull /sdcard/misc.img
adb pull /sdcard/radio.img
adb shell rm /sdcard/efs.img
adb shell rm /sdcard/recovery.img
adb shell rm /sdcard/boot.img
adb shell rm /sdcard/system.img
adb shell rm /sdcard/cache.img
adb shell rm /sdcard/misc.img
adb shell rm /sdcard/radio.img
7z a skitzbackup.7z *.img
del *.img
Could this be used to backup apps and app data before unlocking bootloader? I can't see a /data partition
working perfectly!You're great
djmasque said:
Could this be used to backup apps and app data before unlocking bootloader? I can't see a /data partition
Click to expand...
Click to collapse
No. Unfortunately, using this method to backup needs to write to the 'sdcard' which is what you want to back up.
Writing a script to back up data is a bit tricky since you can't reference it as a drive in windows and you can't know, for sure what the mount point will be in linux.
My main aim with the first version was to write a script which would work on either Windows or Linux, which it does. I might do seperate scripts to do a data backup.
bcmobile said:
No. Unfortunately, using this method to backup needs to write to the 'sdcard' which is what you want to back up.
Writing a script to back up data is a bit tricky since you can't reference it as a drive in windows and you can't know, for sure what the mount point will be in linux.
My main aim with the first version was to write a script which would work on either Windows or Linux, which it does. I might do seperate scripts to do a data backup.
Click to expand...
Click to collapse
Okay, good work nonetheless
Looks a lot like rotobackup, hehe.
Chainfire said:
Looks a lot like rotobackup, hehe.
Click to expand...
Click to collapse
Yes, it is based on rotobackup method, but compresses and cleans up too
Sent from my GT-P7100 using XDA Premium App
bcmobile said:
Yes, it is based on rotobackup method, but compresses and cleans up too
Sent from my GT-P7100 using XDA Premium App
Click to expand...
Click to collapse
Whats needed now is a kind of automated restore
bcmobile said:
You will need adb access to your tab whichever platform you use.
All you need to do to run it is extract the attached archive and run
Click to expand...
Click to collapse
Sorry for the noob question but how do i do this true windows?
Will this work for me?
Hi bcmobile,
This looks excellent.
I'm currently running a P7100 (10.1v) with ISI-Galaxy 1.2.5v (HC3.2) but my baseband/modem is still P7100BUKE2.
I would like to get the GSM working (for sending USSD commands) but I would need to flash my modem, and I would like to backup the modem before I flash it with the P7500 modem.bin, if something goes wrong, I can always go back to the old one.
In your script, is radio.img the modem.bin?
Also is the "/dev/block/" always the same on all the different versions of the tablet? (in other words if I have a 10.1v will this backup my modem).
Thanks so much. You help is much appreciated.
seraphimserapis said:
Whats needed now is a kind of automated restore
Click to expand...
Click to collapse
/!\ IN THEORY /!\ you'd just have to copy the .img files back to the tab and switch the command line arguments for dd. (e.g. dd if=/path/to/file.img of=/path/to/directory)
soo i know this is kind of old but does this work for any device? if so what am i doing wrong? its stuck on deamon started successfully...
See 2nd post for International users and Fastboot rooting.
For ATT users only:
What this is:
This is a full clean SBF of 2.3.4 or 1.8.3 WITH the BL unlock and rooting built in to /preinstall.
Flashable SBF: Full 2.3.4 with preinstall root and pudding bootloader unlock, full sbf
Flashable SBF: Full 1.8.3 with Bootloader unlock and preinstall root. It's over 9000 (600mb DL service sbf)
1. Flash with RSDLite 5.3.1 or sbf_flash
2. Root your phone from adb
Code:
adb shell
/preinstall/restoresu
3. If you don't have superuser.apk do this as well
Code:
/preinstall/restoresu all
Apparently I am a terrible scripter, so follow eval-s instructions from here:
type in adb ("adb shell") or terminal emulator, exactly:
Code:
/preinstall/dosu
/bin/mount -o remount,rw /system
cp /preinstall/su /system/bin/
chmod 6755 /system/bin/su
PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk
The last step is optional (and next-to-last *should* be unnecessary), as you can install Superuser however you like. In fact, if you've installed it, simply typing "/preinstall/su" is another way to root, and you could then mount /system read-write and copy it into /system/bin.
Click to expand...
Click to collapse
4. Enjoy
Lastly, you can make your own preinstall pretty easily, include any kind of mod you want P_ROM etc. For instance when I reinstall I always want to install wget and crond, turn off tomoyo permissions and disable the usb plugin sound. You can put apps in /preinstall/app then make a md5sum file in /preinstall/md5 and apks will get loaded on reboot every time you flash. This is more of a fyi for those of you out there cooking up sbfs. you've got a huge partition to play with so I'm sure people out there can come up with creative ways of using it.
Hi guys.. here is a useful little /preinstall for you (attached)
Put phone in fastboot mode, then:
Code:
fastboot flash preinstall preinstall.img
fastboot reboot
(older versions maybe need "fastboot -i 0x22b8")
after fastboot & reboot, type in adb ("adb shell") or terminal emulator, exactly:
Code:
/preinstall/dosu
/bin/mount -o remount,rw /system
cp /preinstall/su /system/bin/
chmod 6755 /system/bin/su
PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk
The last step is optional (and next-to-last *should* be unnecessary), as you can install Superuser however you like. In fact, if you've installed it, simply typing "/preinstall/su" is another way to root, and you could then mount /system read-write and copy it into /system/bin.
Many thanks to Brandon & The2d for brainstorming this out in a crazy "there's no way it could be possible" rooting session. There were a lot of harder ways... who knew we'd be so lucky! And thanks to Edgan for the great "dosu" =)
You can find fastboot here: http://forum.xda-developers.com/showthread.php?t=1138092
Woohoo! 10 char!
Love you long time! Congrats on figuring this out!
i just unlocked my phone and wanted to root, i installed the img but when i try to enter /preinstall/dosu it gives me file path not found. do i need to reboot or something after flashing the img?
Worked a treat with gingerbread! Thanks a lot guys!
For some reasons, could not adb to go, so had to do it with the terminal but it's all good!
neotekz said:
i just unlocked my phone and wanted to root, i installed the img but when i try to enter /preinstall/dosu it gives me file path not found. do i need to reboot or something after flashing the img?
Click to expand...
Click to collapse
I am having the same problem, path not found. What can i do?
bump
Anyone else figure out how to root? Is this only for gingerbread?
-eval, would we just push that SuperUser app to our phone through ADB if we already have Gingerbread on it? Or do we just flash that through fastboot?
airbillion said:
bump
Anyone else figure out how to root? Is this only for gingerbread?
Click to expand...
Click to collapse
This will work for any firmware version
neotekz said:
i just unlocked my phone and wanted to root, i installed the img but when i try to enter /preinstall/dosu it gives me file path not found. do i need to reboot or something after flashing the img?
Click to expand...
Click to collapse
Using linux?
Sent from my MB860 using XDA Premium App
LancerV said:
Using linux?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I used fastboot from windows.
eval- said:
Hi guys.. here is a useful little /preinstall for you:
http://www.multiupload.com/A9X3718TXK
Put phone in fastboot mode, then:
Code:
fastboot flash preinstall preinstall.img
(older versions maybe need "fastboot -i 0x22b8")
steps:
Code:
/preinstall/dosu
/bin/mount -o remount,rw /system
cp /preinstall/su /system/bin/
PATH=/system/bin:$PATH pm install /preinstall/Superuser.apk
http://forum.xda-developers.com/showthread.php?t=1138092
Click to expand...
Click to collapse
You still need to set the permissions on SU after you copy it from preinstall.
chmod 06755 /system/bin/su
rjohnstone said:
You still need to set the permissions on SU after you copy it from preinstall.
chmod 06755 /system/bin/su
Click to expand...
Click to collapse
In adb shell when I enter the 2nd command:
adb shell
$
cd /preinstall/dosu
cd: can't cd to /preinstall/dosu
this is my output.
airbillion said:
I used fastboot from windows.
Click to expand...
Click to collapse
You have to use the linux version
Sent from my MB860 using XDA Premium App
LancerV said:
You have to use the linux version
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Ill give it a shot. thanks
airbillion said:
In adb shell when I enter the 2nd command:
adb shell
$
cd /preinstall/dosu
cd: can't cd to /preinstall/dosu
this is my output.
Click to expand...
Click to collapse
cd /preinstall
then...
dosu
HTH
the2dcour said:
cd /preinstall
then...
dosu
HTH
Click to expand...
Click to collapse
that is what I keep on trying, but it says:
can't dosu
airbillion said:
that is what I keep on trying, but it says:
can't dosu
Click to expand...
Click to collapse
might have to wait till tomorrow when I'm done with the sbf with a 1 command install then ^^;
this worked:
Code:
adb shell
cd /preinstall
su
/bin/mount -o remount,rw /system
cp /preinstall/su /system/bin/
reboot
Hi,
did anybody successfully mount system R/W?
I tried https://forum.xda-developers.com/t/script-android-10-universal-mount-system-read-write-r-w.4247311/
but it did not work.
Regards,
Hyper
I used https://forum.xda-developers.com/t/...ake-partitions-rw-in-super-partition.4120963/
for stock rom.
NisseGurra said:
I used https://forum.xda-developers.com/t/...ake-partitions-rw-in-super-partition.4120963/
for stock rom.
Click to expand...
Click to collapse
Just forgot, I also tried this one. How did you do it?
I could not find super.sin.
Also when trying to unpack the super image, the Tools says, it would not be a proper super image :-/
You need root and usb debugging
Place the superrepack.arm64_pie in your adb folder and then open an cmd shell:
adb push superrepack.arm64_pie /data/local/tmp
adb shell
su
cd /data/local/tmp
mv superrepack.arm64_pie superrepack
chmod 755 superrepack
stop
Then i used for a-active:
./superrepack /dev/block/bootdevice/by-name/super system_a
./superrepack /dev/block/bootdevice/by-name/super system_ext_a
./superrepack /dev/block/bootdevice/by-name/super product_a
sync
reboot
Can i ask why you want to mount system as RW?
morpheus302 said:
Can i ask why you want to mount system as RW?
Click to expand...
Click to collapse
Without a proper debloating it is not possible to get MicroG running without issues :-/
NisseGurra said:
You need root and usb debugging
Place the superrepack.arm64_pie in your adb folder and then open an cmd shell:
adb push superrepack.arm64_pie /data/local/tmp
adb shell
su
cd /data/local/tmp
mv superrepack.arm64_pie superrepack
chmod 755 superrepack
stop
Then i used for a-active:
./superrepack /dev/block/bootdevice/by-name/super system_a
./superrepack /dev/block/bootdevice/by-name/super system_ext_a
./superrepack /dev/block/bootdevice/by-name/super product_a
sync
reboot
Click to expand...
Click to collapse
Thank you! Gonna try this again.
//EDIT
Unfortunately after reboot I have ramdump. This never happpend before
I exceuted the scripts until all errors were gone.