I've been looking now on how to unlock my orange uk kasier for about 2 weeks. I'm going to use Olipro's or jockyw2001's unlocker BUT in order to do this I need the original radio version of the phone which is 1.27.14.32 I've looked everywhere for this and just cant find it and reading some threads it seems like I'm not the only one. Can some one please help.
As I see it without this radio version I cant unlock my phone and therefore cant add other roms as the phone may sim lock and as this is a works phone I doubt I'll be able to ring myself to get the unlock code and it may raise my firms eye brows when I ring them to do it if I 'balls up' and as I've only had it 2 weeks i understand orange wont provide the codes for a miniumum of 3 months
Please dont flame me, I've read hundreds of posts but just cant seem to find this ( or is there another way round this )
I had the same radio ROM on my Kaiser (Orange branded)
I used Radio ROM 1.27.12.32.
All went well & the device runs fine (no sound loss issues that some people had when trying 1.27.14.09)
If you did have ROM compatability issues you could upgrade to the WM6.1 ROM after unlocking.
I think all these files are available in the wiki.
check the rom development section and the wiki, you should be able to find a list of radio only flashes including that one.
Thanks Mr B, Cosmic Blue believe me I have looked and this radio is not anywhere.
Mister B when you 'upgraded' your phone could you still get notification of answer phone messages left on your phone, I've 'upgraded' a hermes before which was on orange and never got this function back unless i put a genuine orange rom on it ?
Hard to answer that one. I had my orange answer phone canceled via orange services prior to flashing.
Your other option is to dump the rom from your device & extract the radio to use for reflash
I think you'll find the notification is in the main rom not the radio.
I remember a few people having problems after flashing cooked roms.
Had some posts on this & a cab file with the required dll to fix it.
Might be worth doing a bit of searching on this.
Mister B said:
I had the same radio ROM on my Kaiser (Orange branded)
I used Radio ROM 1.27.12.32.
All went well & the device runs fine (no sound loss issues that some people had when trying 1.27.14.09)
If you did have ROM compatability issues you could upgrade to the WM6.1 ROM after unlocking.
I think all these files are available in the wiki.
Click to expand...
Click to collapse
Everything you wanted to know about radios
http://forum.xda-developers.com/showthread.php?t=393182
Thanks Mister B, found the orange cab by Rabdo so nearly there now
Denco7 I'd checked that one already and no 1.27.14.32 which is what I'd really like as I know it works well on my tytn ii.
guess I'll have to look into dumping it then
1.27.14.32
I have that radio version (1.27.14.32) in my Orange UK TyTN II. I've dumped the ROM but I can't figure out how to reconstruct just the radio! If someone can help me I will will upload it.
I also had the same radio 1.27.14.32 and could not find it for download but after some reading I came across the Radio Mister B mentions above 1.27.12.32 and it worked fine (including the answer phone notification) with the Dutty rom I was using I think it was the (DualTouch V3). I've since upgraded to the L26 V9 rom with radio 1.58.25.17 and its still working fine, although I haven't had the chance to check answerphone notification.
Hi Guys,
thanks for the good job you'all are doing. Will appreciate whatever help i can get to resolve this issue with my phone. I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. Since then i have noticed that sometimes it seems my phone is dialing itself or a call is coming in. The funny part is though every other function is working i wont be able to answer this phone. It will seem to hang. Then after a while i will get the cprog.exe error. To be able to make phone calls i have to soft reset the phone. i have had to hard reset my phone twice already with no solution. Also googling has not been able to provide any answer too. I just sent an email to HTC Technical support now but with experience i doubt if i will get any useful response. So this is my last resort.
It is also pertinent to note here too that intermittently i do get the tmail.exe errors.
Hi,
I am having the same problem after the upgrade..frequently its becoming stoned! requiring restart many time during the day...which was not the case before...anybody has got any solution???
I love my TyTn II but not the 6.1 ..its not stable!
azuka said:
Hi Guys,
I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. ........ errors.
Click to expand...
Click to collapse
Azuka, who so ever upgraded to 6.1 from HTC experienced the same problem even i myself suffered the same. So your only solution is to downgrade to 6 but before doing that you must HardSPL your phone ...
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
NotATreoFan said:
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
Click to expand...
Click to collapse
Thanks for your reply. Your two words "Bad Flash" got me thinking. How could that be. I thought so too and had to re-download the file from htc website and re-installed.
About HardSPL'd your phone, from reading the wiki i now know what it is. But there is no instruction out there to HardSPL'd. Do i need to get the file and copy unto my phone or what?
thanks.
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
NotATreoFan said:
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
Click to expand...
Click to collapse
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
azuka said:
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
Click to expand...
Click to collapse
I have the freezing issues too. Two things has helped me reduce the frequency (and improve general responsiveness of the device):
1. I've disabled the HTC task manager application - that helps a lot on responsiveness
2. Each time I soft reset the phone, I manually kill the mstli.exe process - that helps a lot on the freezing issues.
regards,
Spip
Just to share some experiences
So I have the TyTN II and I recently upgraded to the official HTC WM6.1.
I have none of these problems of screen freezing, unstable rom, etc etc etc...
However, I do suffer from occasional program error message and asks me quite a few times to send the report to microsoft.
But this only happens when I load certain third party softwares and then close them down.
I attribute this to compatibility issues with WM6.1...maybe I'm wrong. But that's what I think anyway.
azuka said:
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Click to expand...
Click to collapse
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
I had this issue and it was just down to previous HardSPL being left at an early version (I think around 1.02) on the device and if you apply this latest HTC stock ROM update you get a bad flash and freezing especially in the threaded SMS app.
Install any HardSPL later than 3.00 then redo the ROM update and it should cure it.
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
NotATreoFan said:
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
Click to expand...
Click to collapse
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
if u need upgrade or downgrade then u r speaking about a need for hardspl
dkiersz said:
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
Click to expand...
Click to collapse
Just a quick update. After HardSPL-ing my phone it worked well for sometime then the tmail.exe error surfaced. I have only had the cprog.exe error - where a call comes in and i can not answer neither can i make another call until i soft reboot - has only happened once or twice. Apart from these the phone has been working well.
Anyway i just got a reply from my earlier mail to HTC and thought i should post if here for people's information. Apparently they are aware of these issues and working on them. Read for yourselves:
New Response From [ Maha Mamer (Qatar Support (Tech)) ]
Thank you for contacting HTC Corporation Middle East Support Dear Mr. Felix First of all we are very sorry for our late reply Please, if your problem still exist with this error message, you can try one of two options. 1- go to Start> Settings> System(tab)> error reporting> and disable the error reporting option. 2- If this did not solve your problem, then you might need to get back to WM6.0 until we finish our update for the new release of WM6.1 with the new modification for our web site. Please do not hesitate to contact us back for any inquires. Please note that you could also contact us by phone on our hot lines. http://www.htc.com/mea-en/CA_Hotline.aspx?region=MEA Sincerely, thank you for choosing HTC Corporation HTC Corporation Middle East Support Team http://www.htc.com/mea-en/default.aspx
Just an observation here:
After reading somewhere on these pages that the erratic behavior of TYTN II could be due to bluetooth adapter i decided to go some days without my Motorola S9 bluetooth ear piece i am yet to experience any of the issues i had before. Could the bluetooth software for WM 6.1 be the issue?
Momentary Freezing - Resolved?
azuka said:
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
Click to expand...
Click to collapse
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
wa4cbg said:
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Click to expand...
Click to collapse
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
How to Stop Momemtary Freezing
azuka said:
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
Click to expand...
Click to collapse
I am looking for a solution. Not using Blue tooth to use a device that costs over 600.00 just doesn't make sense to me.
Is there a ROM hardSPL combination that will give me freeze-free performance or is this an HTC problem that is not solvable. I just can't believe that every Kaiser user that has upgraded to wm 6.1 has the same issue that I have with momentary freezes that last up to 5 seconds.
Is the solution another ROM, another Hspl, another phone? Who can help me resolve this issue? Is there a better place to post this?
Thank you
Freezes and locks.
Prior to my upgrading my AT&T Tilt to WM6.1 which I did today. I was experiancing LONG freezes, listening to music or just waiting for menus. I could not determine any specific software that was the cause. I tend to install a lot. Did a hard reset, didn't install the AT&T bloat, reinstalled my primary apps MS Voice Command 1.6 (a Must). Still same issues... Occationally could NOT answer calls. Hit the green button, or the answer option on screen. the onscreen 'answer' would flash, but I could not use the phone until a soft reset. LONG process when you are waiting for a call back.
AT&T sent me a new phone which I got and installed the NEW wm 6.1 before anything. Worked pretty well, but I had not made any calls or recieved any all day. I did listen to several hours of music on my Motorola S9 headset and made sure Audible Player would work. Two apps I use daily.
All seems well, except NOW I get the cprog.exe error. I decided to test my phone with a simple incoming call. Before I ended it, it went dead. Not sure what the HardSPL is yet. Will look into that. Just thought I'd let others know that the lag, AT&T seemed to think was a hardware issue so they replaced my Tilt.
Software installed; MS Voice Command 1.6, Live Search, Audible Player, TCPMP, FlashBundle, GPSToday. Pretty much it besides the AT&T bloat that came with the ROM. Good luck
First, sorry for my English; I'll do my best
I have Spanish Vodafone Diamond. I flashed using Unsigned HardSLP, NiAX Buffet 2.0, and Radio Radio 1.00.25.05. Later, I unlocked with the "free method".
If worked fine for me for some weeks, but I give to a friend who is using it now with other company (MoviStar). It worked for some hours but after that the phone couldn't get the network.
I tried first change to other Radio 1.03.25.18 (after Hard Reset), and it worked again only for only few hours. After that, no network again.
I tried also reflash again HardSLP + same ROM + Radio 1.00.25.05 but I can't get network again.
Any idea?
I had the same problem...
And a whole lot of others hihi.. Anyhow, in my case uploading Radio v1.05.25.BS14 (Quad Band)(Provided by Dutty) (NEW ONE) fixed the issue.. But I didn't get Radio 1.00.25.05 to work...
me too... i had the same problem...
I already tried 1.00.25.05, 08, and bs14, but no luck... can anyone figure out why?
Nobody have idea? ****...
could it be that the phone is barred by any chance?
I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.
Hi all! I just got yesterday Mda Vario 3, aka kaiser, and the man who i bought it from told me that wifi need to be setup... Ok. I try wifi, it works, i connected to my router and it worked.
Read specs: radio 1.71.09.01
protocol 25.75.40.02
rom 3. abusalza and i think hard spl was 3.29
and, as far i know rom flashing, i thought get and flash new rom... i tried wm 6.1 wm 6.5... on some camera didnt work and i get a new radio and it works, BUT wifi doesnt work on any rom with any radio, i changed spl but does not work. i dont know what to do...
Any help would be gratefull