Related
Hi,
Unfortunatelly I started playing with my I9000 without reading enough and bricked my phone completely (?). If anyone can help please do so.
Description:
1. I tried to flash with Odin new firmware but after flasing and rebooting got message "unable to update media ...." (or something like that) When powering on I got only welcoem screen with phone name
2. I wanted to repeat flashing but Odin could not start reflashing (I still could go into Download mode)
3. I found at xda forum [STOCK ROM] Odin3 One-Click Downloader,
but I didn't notice that it was for Captivate (I thought it is just another name for I9000,now I don't know why)
4. I reflashed my i9000 and after reflashing got only At&t screen turning on and off, without possibility to enter into download mode.
Actually I'm stuck with this situation I feel really stupid, but by mistake I did what I did.
Is there any chance to help ?
Thanx in advance.
according to some users, you might get lucky, and might be able to recover
let your phone stay on on that loop, wait until it turns itself off
then try the 3 button combo again
if all else fail, contact samsung tech support, which will simply send you back to your cell phone place
I'll try but I'm not very optimistic
Waiting doesn't help - I tiried all possible 3 or 2 button configurations unsuccesfully.
Anyone has any other idea if antyhing can be done with the issue ?
The exact same thing happened to me. There is nothing you can do except to bring it back to Samsung. I brought mine back and they have to replace the whole motherboard
what did you tell them? is it going to cost you?
diehard2222 said:
what did you tell them? is it going to cost you?
Click to expand...
Click to collapse
I told them my phone cannot boot. Can they help to reflash the FW and see if it helps. They did and said phone still cannot boot after reflashing. Hence they have to change the motherboard. I asked and they say it's under warranty...
The shop where I had bought my I9000 sent it to Samsung - I will see what they do with it.
I have flashed a vibrant with a i9000S software but the radio did not work quite well. Since the two have different keys, now i cant get it to boot mode. i was able to get into recovery mode via ADB but all i can do is use vol to go up or down and not select an option. the device wont even get out of recovery mode.
Any help will be greatly appreciated.
Same
I did the exact same thing and couldnt get it to go past the AT&T logo i took mine to the samsung authorised repair centre and after 3 days and 49 dollars they fixed it. I dont know how they did it because i couldnt get USB to reconginise or download mode or anything just stuck on white screen but they managed to get it up and running.
So even though it cost 49 dollars to fix it via software method it is better then spending 800 on a new phone or 300 for a new chip which they originaly qouted me. So there is hope with proffessional services
now, the magic usb plug is avaliable in ebay, it can turn your bricked phone into download mode in a few seconds. really good!!!
Hehe... ...the magic is one usb connector an 301 kohm resistor
Br:25011
h***://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
Hey guys,
I've got a realy big problem with my galaxy. It's not possible to start it anymore. Nothing happens when I try to turn it on, I don't even get the first boot screen.
My phone is t-mobile branded and I tried to do this, to get the download mode working (sry, i can't post the link cos i have no permission):
[FIX][110% SAFE][UPDATE: 15.Nov.2010] 3-button combo FiX for Selected Firmwares
forum.xda-developers.com/showthread.php?t=821698
After applying the update.zip the flash starts but the phone did't restart after a few seconds like posted.
I already removed everything (battery, sim card, sd card) but nothing happens.
Please help!
Brgds
can u get into download mode? if yes thn flash a firmware thru odin...
nope, no chance. it's totaly dead, no reaction by pressing any buttons.
seems so i have no other chance then giving it to t-mobile/samsung
is ur phone charged? may be the phone doesnt react cause of no battery...??? try to chrge for some time....
tried already.... seems hope less.
I gave it to t-mobile and will get a new one in 2 weeks
thanks for your help!
same here the same problem is there any thing that I can do to fix this problem please help
x0Nemesis0x said:
same here the same problem is there any thing that I can do to fix this problem please help
Click to expand...
Click to collapse
Can you go to download mode? If yes, then flash a firmware from odin as mentioned above. Else return is the only option provided you haven't left any trace of manipulation on your phone...
Had the same thing. The phone didn't even react after connecting to the charger.
I had to give it to Samsung, got it back after almost two weeks. But it came back unbranded
I'm new to sgs and android,so hopefully this is a noob problem and easily fixed and not something more complex.I've searched and read alot of posts and not found another problem similar,so maybe someone can help.
Got the phone recently and flashed Darkys v7.0 and very impressed by the rom.
Basically my incoming calls dont show up,when an incoming call happens,i get a vibrate and some sort of notification flashes on the screen for an instant then disappears,then my network signal drops out.
I've tried another sim and different service provider,same problem which indicates some issue with phone,have triple checked all my settings in call settings,answering is enabled.
I can make calls,sent and recieve sms messages and connect to net/mail via my 3g,so cant figure out whats going on.Any suggestions greatly appreciated.
Thanks in advance
Gav
Hi!
Unfortunately, same thing here with me. First, I flashed 7,5 and the problem appeared. This mornig I put new rom 7.6 but still problem remains. Everything works, but incoming calls dont. Im trying to capture message that flashes quickly, but with no sucess...
SOLVED!!!
Factory reset did the thing. Calls are incoming as they should. (setings->privacy->factory reset)
Hope it will work for you.
Greetings from Croatia
Hey i have tried this and have possibly bricked my phone as all im getting is the Galaxy power up screen and nothing else,tried to get into recovery and nothing,ah well my android fun maybe over,might just get an iphone,seems a bit simpler for a knuckledragger like me
I really doubt that factory reset coud brick phone. Try to boot in recovery/download mode with 3button combination (hope you have it) and flash new ROM.
IrishGav said:
Hey i have tried this and have possibly bricked my phone as all im getting is the Galaxy power up screen and nothing else,tried to get into recovery and nothing,ah well my android fun maybe over,might just get an iphone,seems a bit simpler for a knuckledragger like me
Click to expand...
Click to collapse
try to flash speedmod recovery on your phone, do the most recent stable version, once you get into recovery you can see if it truly is bricked, if you get the common SD error then it is bricked but if it's complaining about some data missing your still in luck.
check out what to do here....i posted about this a while back also if you want to look at my past posts.....
http://forum.xda-developers.com/showthread.php?t=889506
IrishGav said:
Hey i have tried this and have possibly bricked my phone as all im getting is the Galaxy power up screen and nothing else,tried to get into recovery and nothing,ah well my android fun maybe over,might just get an iphone,seems a bit simpler for a knuckledragger like me
Click to expand...
Click to collapse
I had exactly the same problem; installed Darkys 7.5 after which I couldn't receive any calls anymore, did a factory reset and got bricked. 3button to recovery didn't work on my phone, but luckily I live close to a Samsung service center where they reflashed my phone.
I am curious what was causing this. If it is solved I would like to try the rom again, cause it looked great.
spectre85 said:
try to flash speedmod recovery on your phone, do the most recent stable version, once you get into recovery you can see if it truly is bricked, if you get the common SD error then it is bricked but if it's complaining about some data missing your still in luck.
check out what to do here....i posted about this a while back also if you want to look at my past posts.....
http://forum.xda-developers.com/showthread.php?t=889506
Click to expand...
Click to collapse
Hey currently all im getting is the yellow triangle sign with the android logo cleaning up and it says ''Downloading'' and on the bottom it says ''Do not turn off target'' that just stays like that for hours and nothing
Now i never had the 3 way download button working or checked,i pretty much did CWM and flashed darkys right after buying the phone.
When i try to get into CWM all i get is the Samsung Galaxy S gt i9000 start up screen and nothing.
Thanks for your help
I have the same problem excecpt I flashed "leap in the dark". Will factory reset erase all my data? If so are there any other options
Its really pissing me off.
Sent from my GT-I9000 using XDA App
i now decided to flash darkys 7.7
same problem
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)
worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...
I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.
...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."
yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje
cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.
http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje
The story so far...
Bought a new Optimus Black and gave it to my girlfriend for her birthday a couple of days ago. After playing with it for about an hour she put it down, I picked it up and decided to have a tinker. I installed Cyanogen mod 3.5.1 after rooting it with Gingerbreak. So far so good but I didn't really like the look of the ROM and the absence of a Market seemed like hassle so I used ClockworkMod to restore the backed up stock ROM.
It's still working fine but now I see there is an official update from inside the phone. I presume it's the upgrade to Android 2.3 so run it and reboot the phone. That's when it all goes wrong. I'm now stuck in the CWM recovery screen. I try all the options, following any online guides I can find that were supposed to have worked for people. I try restoring the backup, restoring cyanogen, clearing the cache, dalvik, everything but nothing happens and I keep booting back into the CWM recovery screen.
Next day I try the LGUnitedMobileDriver and the phone recovery option but despite trying several times I can get no further. A friend tried to use Odin to restore it but got no success. Finally, we tried restoring with a KDZ file with
KDZ_FW_UPD_EN, Windows Enabler and LG B2CTool and now the phone got stuck in yet another loop - a black screen with 'updating firmware'. The LEDs flash for a minute and it reboots and does the same again.
What's more, the phone will now no longer charge or turn on without being connected to the mains.
What are my options here?
Follow the tutorial given below.
http://forum.xda-developers.com/showthread.php?t=1275315
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
pickarooney said:
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
Click to expand...
Click to collapse
have you tried the CS_EMERGENCY option in R&D TOOLS? Wait I'll find the link..
Here >>> http://forum.xda-developers.com/showpost.php?p=18841596&postcount=8
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
The CS_EMERGENCY is the only thing worked, he used a german V10A ROM. If you managed to unbrick it, you can flash it again with your desired KDZ, or use CS_EMERGENCY and flash directly your desired KDZ. TRIAL AND ERROR.
Emergency c-section... nope, I will try that now!
Said that it will get stuck at 4% but it is still flashing. Just wait for the phone to reboot by itself.
It just crashes with a fatal error as soon as it gets to the second tab (downloading) on both PCs I tried it on. I tried several KDZ files with the same result.
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
pickarooney said:
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
Click to expand...
Click to collapse
Does it have warranty? Why not RMA it, I think it has a hardware problem now since you mentioned it doesn't charge anymore. Also, have you tried a different USB cable?
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
pickarooney said:
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
Click to expand...
Click to collapse
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
gabwerkz said:
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
Click to expand...
Click to collapse
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
darkzorn said:
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
Click to expand...
Click to collapse
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
Fingers crossed for you !!!
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
IT will mostly work..Good luck though and please do reply here and let us know if it worked..