Related
I'm curious if there is way to install the Clockwork Mod on Recovery 3e without changing the kernel? I really like having the option of wiping the internal SD card from recovery and I haven't seen anything on here that I can use both CF and 3e together.
Any help would be greatly appreciated.
Did you try this method?
http://forum.xda-developers.com/showthread.php?t=734166
What's your intention? If it's to install update.zip files, you need 2e recovery which I believe requires a custom kernel. Clockwork alone won't do it.
gtg2 said:
What's your intention? If it's to install update.zip files, you need 2e recovery which I believe requires a custom kernel. Clockwork alone won't do it.
Click to expand...
Click to collapse
Yes, it's so I can install Darkys ROM and other update.zip files. I really don't want to mess with the Kernel as it does allow me to format the internal SD card in case things goes south (which it has for me previously).
So for the moment, there's no way to get around the Recovery 3e? I guess that answers my question.
Thank you
zombrex said:
Did you try this method?
http://forum.xda-developers.com/showthread.php?t=734166
Click to expand...
Click to collapse
That method would work if I had recovery 2, but it doesn't work with recovery 3e
Install a custom kernel to get 2e. After you flash your rom, you'll get whatever kernel that comes with it.
gtg2 said:
Install a custom kernel to get 2e. After you flash your rom, you'll get whatever kernel that comes with it.
Click to expand...
Click to collapse
I appreciate the advice, but I would really like to retain that kernel as it allows me to wipe the internal SD card if need be
cyfawcett said:
I appreciate the advice, but I would really like to retain that kernel as it allows me to wipe the internal SD card if need be
Click to expand...
Click to collapse
Most Kernels allow you to wipe the internal SD card anyway. You can't use Clockworkmod recovery without 2e, there's no work around.
This is the kernel that I use (Link)
Serikiito said:
Most Kernels allow you to wipe the internal SD card anyway. You can't use Clockworkmod recovery without 2e, there's no work around.
This is the kernel that I use (Link)
Click to expand...
Click to collapse
2 things. 1. I'm using Bell's JPL and 2. Does that kernel have the format Internal SD included?
Thanks
I personaly use speedmod kernel which includes root, 2e and clockwork recovery. Clockwork recovery includes features like format sd card amongst others. Regardless, whatever custom rom you install will likely come with it's own custom kernel.
gtg2 said:
I personaly use speedmod kernel which includes root, 2e and clockwork recovery. Clockwork recovery includes features like format sd card amongst others. Regardless, whatever custom rom you install will likely come with it's own custom kernel.
Click to expand...
Click to collapse
I was thinking of using that one... I will give it a shot...thanks for your advice
Well I went with the speed rom and the Darkys 7.7 ROM. Works amazing so far, but I need to flash my bell modem somehow to get rid of that supid R on my cell signal meter. I'll figure that out tomorrow.
Thanks all!
cyfawcett said:
Well I went with the speed rom and the Darkys 7.7 ROM. Works amazing so far, but I need to flash my bell modem somehow to get rid of that supid R on my cell signal meter. I'll figure that out tomorrow.
Thanks all!
Click to expand...
Click to collapse
Congrats.
You'll find the the modems for various Bell firmwares in different threads - just search for them. If you have no luck, PM me and I'll shoot you one over. I can't say that I've noticed much difference between any of the 2.2 modems (JK3, JK4 or JL2). Also, check that you have the 850 band enabled after updating the modem. Here's a thread on how to do this (not the cleanest thread but has the info you'll need).
http://forum.xda-developers.com/showthread.php?t=787472
gtg2 said:
Congrats.
You'll find the the modems for various Bell firmwares in different threads - just search for them. If you have no luck, PM me and I'll shoot you one over. I can't say that I've noticed much difference between any of the 2.2 modems (JK3, JK4 or JL2). Also, check that you have the 850 band enabled after updating the modem. Here's a thread on how to do this (not the cleanest thread but has the info you'll need).
http://forum.xda-developers.com/showthread.php?t=787472
Click to expand...
Click to collapse
Thanks so much again for all the advice! I decided to use the J2L modem and my signal quality has never been this strong! Unreal!
I'm looking forward to trying out the GPS now.
Cheers!
Hi all,
i got my sgs like 3 weeks ago and started to work with it. 1 week ago i saw the battery mod which i would have liked to install but couldnt.
Thing is, i'm on a I9000-HKYAMN 2.2.1, the recovery mode is 3e which wont let install zip bundles nor i have be able to get into clockwork, also tried to install the battery mod via adb but it just wont do.
I started lurking here, and have been taking a look to the kernels and roms avaliable.
After reading the FAQ i got to clear many things i didn't understand but still i wanted to ask for advice. I've seen many different ROM's and kernels but im still not sure.
I'd like to get the 2e version of recovery, or at least be able to get the clockwork's one, which would be far able enough to do the little things i'd like to.
Where would u recommend to start looking at?
thank you in advance
As I understand it, you just need to flash a kernel using ODIN that is CWM compatible. Such as SpeedMod, or SOK, or DamienGTO's...just about all kernels on XDA, really. Once the new kernel is flashed, install Rom Manager from the Market and have it flash your recovery with Clockwork.
The first kernel I flashed was SpeedMod, since his instructions for flashing via ODIN are very clear and very easy.
Good luck
Thank you very much. Just two more questions:
Does it matter the version of the kernel? (ex. my is XXX, the other is YYY. Is it a problem?)
Flashing the kernel makes everything on sgs fly away isn't it?
thank you very much
Assuming that you aren't root, you'll have to use Odin to flash a new kernel. I would recommend the speedmod kernel. Here: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html you can get the drivers, Odin and the kernel. Following the guide it shouldn't take more than 5min to flash the new kernel. You will get the ClockworkMod recovery, which brings many tweaks and the ability to run zip files from the SD.
Neosepia said:
Thank you very much. Just two more questions:
Does it matter the version of the kernel? (ex. my is XXX, the other is YYY. Is it a problem?)
Flashing the kernel makes everything on sgs fly away isn't it?
thank you very much
Click to expand...
Click to collapse
Just get the latest version (K13C at the moment).
What do you mean with "fly away"?
No, flashing the kernel won't wipe your data or apps...at least it never has for me. Just be sure you follow the directions on the SpeedMod site EXACTLY.
Hi guys, I'm new here and have been scouring the forums on how to do things but I keep getting caught with uncertainties.
I have an i896 Samsung Galaxy S Captivate with a Rogers 2.3.3 Gingerbread installed.
I have rooted it with no issues and its also unlocked.
What I want to do:
1. CyanogenMod 7
2. Overclock the CPU
But what I don't know is...
1. Since i'm running a Rogers ROM, do I have to flash to an AT&T ROM then to any custom ROM?
2. I read the instructions on how to update to the CM7 ROM but every instruction I read says I must have Froyo/Eclair to goto CM7. So do I downgrade and if so, how can I do that? I tried and what ends up happening is the phone's reception bars have an X and data doesn't work either. In the phone About properties, states that the baseband is "unknown". I suspect I need something more than a stock Rogers ROM without bootloaders. I couldn't find a 2.1 or 2.2 stock Rogers ROM with bootloders.
3. For overclocking, I installed Voltage Control and Control Freak and neither let me overclock, the max CPU is 1000Mhz. I assume I need a custom Kernal to do this but haven't been able to find how to do this during the CM7 upgrade.
I just need someone to point me in the right direction on what order to do all this and whether me having a Rogers stock 2.3.3 ROM causes an issue. I've done a lot of reading on these forums so its not like I just signed up and wanted to know the easy way out. I simply want the proper way to do things so I don't repeat the same mistakes many people may have done in the past.
I have used Odin, Heimdall, Odin One Click, Super One Click for rooting.
Hopefully someone can guide me in the right direction and help me achieve these goals!
You dont need to go back to Froyo, as GB bootloader is compatible. but you need CWM to flash CM7. you can use Rom Manager app to flash the CWM.
Just download CM7 zip file, wipe data, system and cache and install it using CWM. It comes with custom kernel so you can overclock it using those apps you mentioned. You can also flash Glitch kernel....
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
BadBoiSinZ said:
See that's what i've been trying to do but when it comes to installing the nightly rom in zip format, it tells me the signature failed.
Do I need to buy the premium version of rom manager or can I get away with the free version? I don't want to use my credit card, i rather wait until paypal is implemented with android market.
This is so frustrating...
Click to expand...
Click to collapse
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Wdustin1 said:
You need to Odin flash a custom kernel that has CWM in it and then install the zip from CWM. I don't know if all kernels for the i897 are compatable with i896 just have to read. I
Currently Fusionized
Click to expand...
Click to collapse
Ya that's what I don't know either...I read tons of threads where people with i896 Rogers roms tried to flash with AT&T based roms or i897 roms and either bricked their phones or made a mess that took much more to get them back to stock...problem is the people that have i896 roms here I can't contact until I hit 10 posts...so I'm here stuck until then...
Just flash a custom I897 kernel with cwm, once complete, yank battery, replace and button combo boot into recovery and flash the ROM. Whichever kernel you choose doesn't really matter as zip will flash a compatible kernel, the I896 and I897 are identical other than cosmetic branding.
I was on stock rogers 2.3.3.
Installed Sumari kernel. Booted into the sumari recovery, installed CM7 zip, the phone rebooted into cwm recovery, and continued installing.
It worked pretty smoothly.
okay so i flashed my phone with a stock 2.3.5 rom with CWM, but how do I update to CM7? When i boot into recovery the only option I have is reinstall package. Do i rename the CM7 zip file to update.zip and that should work? I'm so lost...
In CWM recovery you need to choose install zip from sdcard, make sure you are in fact in cwm recovery
Before you do that....you need to flash a kernel with Odin that has cwm in it...
Woo! that worked like a charm haha yea baby yea!! Thank you soo much!! i was so scared to flash my cappy going from Rogers to AT&T that it would brick the phone. Got CM7 with Glitch Kernel and overclocked to 1.4 sawweeeeet!!
Now time to fiddle around and customize!
Thanks everyone!!
Hi, I have an international varient of the Galaxy Note GT N7000 which using Chainfire's Got Brick App v1.1 says:
eMMC Chip
Type: VYL00M
Revision: 0x19
Verdict: Danger! This eMMC chip is "Known" to have the brick bug!
I once had installed a custom Kingdroid ROM v3 and wiped it but it had resulted in a Hardbrick/Superbrick so i had to take it Samsung Service Center to get it fixed. They have repaired it and given me back the handset with the Stock ICS ROM. Here are the details:
Model Number: GT-N7000
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.15-N7000JPLPD-CL643396
[email protected]#3
SMP PREEMPT Thu May 31...
Build Number: IM74K.JPLPD
Now i have done some researched and found that this bug is only triggered with kernels (ICS stock & leaked) which have the eMMC_Erase function/command. GB kernels are not known to have this erase function so they are safe.. Also the two safe kernels are franco r3 and speedmod k3 (Correct me if im wrong). Can anyone please guide me on the following:
1) Should I flash Stock Gingerbread OR ICS Kernel(franco/speedmod)?
2) Should I use Recover or ODIN?
3) Plz Provide the links for the Kernels - Franco R3 & Speedmod K3 which are safe?
4) Will the above Kernels provide root access?
5) Is abyss kernel safe (because it supports GPU overclock)?
6) Can i flash an ICS kernel over a Gingerbread ROM?
For answering please answer in a similar numbered way so that it is easy to read and understand for me as well as future audience! Thanking everyone who takes time to read and answer!
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
You Flash it in Odin, It will give you CWM and Root too !
Ive attached the kernel to the post for you.
Abyss kernel is safe, But its for GB ROMs only, You are on ICS so it wont work.
I dont know if you can flash ICS kernel over GB ROM, However, Your are on ICS so you shouldnt need to worry about that.
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
azzledazzle said:
I use Speedmod kernel and i confirm that it is safe (for me at least anyway) Im using CleaNote ICS ROM, So I would suggest you also use speedmod kernel,
Click to expand...
Click to collapse
Thanks for the confirmation mate, one more thing to ask you: Is the speedmod kernel faster than the stock ICS kernel? Is there any flaws such as battery drain/WIFI problem with it? Also does it support GPU OC? Thanks once again for your help!
little-vince said:
don't really want to hijack your thread an i dont really want to make a whole new thread for a simple question.
as a noob, im just wanting to know, if i update my stock gb to stock ics via software update, are there still chances of this emmc bug/brick thats going on?
and the battery drain issues, do they only exist in custom roms or does it exist in stock roms too?
cheers.
Click to expand...
Click to collapse
Firstly get your Galaxy Note checked using Chainfires App (Gotbrick v1.1). If the verdict says "Danger" only then does your device have this problem. My Galaxy Note (Rev 0x19) had this problem and came with GB out of the box and i upgraded it to ICS through Samsung Kies and it worked fine. So i do not think that while updating to ICS via Kies will cause this problem. As of what i know it is triggered when a command eMMC errase is triggered when either doing a factory reset or wipe through recovery. The update as such did not brick my device, however this does not mean it cannot brick yours. I am no expert on this so be a little cautious while updating. I would suggest stick to GB until Samsung Releases a safe stock ICS ROM with a safe Kernel. Cheers!
really easy
1: (optional ) in GB do factory reset (after you have made a backup with TB)
2: put phone in Download mode.
3: use PC odin flash STOCK ICS rom
4: reboot device let it load
5: put device back into download mode
6: use PC ODIN flash Speedmod k3-3
7: reboot
8: launch CWM and tell it to reboot in cwm recovery
9: load your custom rom of your choice
i HIGHLY recommend doing ONLY THE FACTORY RESET WIPE data and cache in GB before you start anything.
ONCE you are in ICS and have successfully loaded speedmod or franco's kernel then it is safe to do a factory wipe if you want. but ONLY after one of those 2 Kernels are on your device.
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
rp4k said:
EMMC BUG. is affected in all N7000 Devices only . only the devices sent to the USA have the revision the non 0x19 bug .
Click to expand...
Click to collapse
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
little-vince said:
okay...
truth is i haven't actually bought the note yet.
just doing substantial amounts of research beforehand.
im pretty sure only the n7000 model is out in australia.
but it's all okay if i dont factory reset/wipe/anything-risky-in-general right?
Click to expand...
Click to collapse
Yes, this bug is known to trigger usually when you do a wipe using the recovery. However there have been some cases when doing a factory reset via the settings has also resulted in a brick. However if you stay away from recovery and do not intend to doing flashing/wipes then i guess you should be ok. And it is a matter of time before Samsung Comes up with a solution. They are said to be working on this bug already. I have the N7000 which i bricked once while flashing and then wiping but i got it repaired since i had warranty. Since then i have stayed away from wiping or installing any custom roms so the device has not given any problems. Hope this info helps! Cheers!
Rom doesnt load during boot
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
cuteglen said:
Dear Developers
I rooted my galaxy note and soon as that i got gained super user access for chain fire app, then i flashed CWM and installed crisello rom with abbysys kernel , it installed all the files correctly and soon after that the phone rebooted .After reboot the phone went inside the boot menu ( the world of galaxy UI boot menu ) and it frozen since then
i tired flashing various custom or stock roms and still the same problem i face
If someone could help me out on what the problem is and how i could get a fix to it
Click to expand...
Click to collapse
What rom are you on? Have you performed any wipes or factory resets?
Sent from my GT-N7000 using xda premium
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
SpyderTracks said:
1. Afaik yes
2. NO, you'll brick, flash from GB kernel, I know some have done from abyss.
3. No. CM based not compatible with Touchwiz framework.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
iraqi4ever80 said:
thank you for your response
just to be sure you said that it is unsafe to flash CM9 from stock ICS?
can we flash CM9 from stock ICS rom with safe kernel such as franco or speedmod
sorry for bothering you and thank you again
Click to expand...
Click to collapse
Only from GB kernel such as abyss. If you flash from ics kernel you WILL brick. This goes for all cm based roms.
Sent from my GT-N7000 using xda premium
kyllerbuzcut said:
I have a quick ( hopefully) question about the brick bug. I already asked but I think a mod must have deleted the whole thread, even though the thread was about the brick bug and I think I might have been bringing a new way ( well for some anyway) to flash safely to new ROMs.
So anyway, I have a 'safe' kernel ( speedmod), and I want to try out 4.0.4 stock ROM. I have extracted the stock ROM zip and the tar file inside. In there is the Zimage.
Do I just delete the Zimage then re-zip and flash from CWM?
OR Do I have to replace the Zimage with another, 'safe', Zimage ( for example just put the zimage in there from speedmod because I want to keep that for now). Does there NEED to be A Zimage there, or will it work fine without one. I don't want to start flashing the ROM and it get stuck half way through.
If it will work this way then this might be a fairly easy way for anybody to flash any new ROM they want. They'll just need to get a safe kernel on there in the first place.
Click to expand...
Click to collapse
Hiya, yep, you can just delete the zimage file, no need to replace, it will just skip writing that partition.
Sent from my GT-N7000 using xda premium
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Try mobile odin. If you point to the tar, it should load all the components. You can then review which components are being flashed.
Sent from my GT-N7000 using xda premium
iraqi4ever80 said:
Hi everybody
I have three questions if You can help me
1- Are speedmode and franco Kernels the only safe kernels for stock ICS?
2- Can I flash CM9 from stock ICS or it is safer to do it from GB rom?
3- Can I flash CM9 kernel for stock rom?
Thanx in advance
Click to expand...
Click to collapse
1. Add goku, dafuq, gl-notecore and abyss42 (GB) to your list.
2. Only do it from a GB firmware or at least a GB kernel like abyss42. SPECIFIC instructions per firmware is listed for a reason. Follow those instructions to the letter.
3. No.
Sent from my GT-N7000 using xda app-developers app
kyllerbuzcut said:
Gave that a go last night and I must not be doing something right. Either I need to re-zip it differently or I need to use something other than CWM (mobile odin?) because it's just aborting before it actually starts flashing anything.
Suppose I could always flash the separate elements on pc odin?
Click to expand...
Click to collapse
Stock rom in a zip? Are you sure you are nit flashing a custom rom? Point us to the file/thread please.
If it is a custom rom, the it is meant to be via CWM.
1. Flash abyss42
2. Reboot recovery
3. Do your wipes
4. Flash.
Im sure there is a specific instruction on where you got that file. Or better yet, go to dr. Ketans thread and get your stock rom from there.
Sent from my GT-N7000 using xda app-developers app
It's just the standard rom file from sammobile.It does come as a zip you know. If you unzip it, then use rar on it you can see all the bits. I thought if I just put a different zimage in there it would just go ahead and use that, but didn't seem to like it after I zipped it all back up again.
Tonight I've ended up getting chainfires excellent CF-Root kernel.Flashed that through odin, over my speedmod kernel.
Put just the factoryfs part of the stock rom zip onto the SD card and flashed that using the cwm app that CF-Root installs for you.. Now have CF-Root kernel and 4.0.4 firmware.
If you don't already have a "safe" kernel then I dunno what the brick chances would be, but since I had a safe one already I thought it couldn't hurt to try it out.
The reason I haven't flashed the hidden, cache, model and sbl parts of the zip is that simply they wouldn't fit on my SD card If it behaves funny or I can make space then I'll try the rest too. And the reason I didn't flash the zimage from the zip should be fairly obvious. Because I don't want a brick
EDIT: I managed to clear some space on the SD and flashed the rest of it. Seems to be working ok, so far anyway. I'm hoping the battery issues from 4.0.3 will be a little better. This is a really good way of doing it all as you can just swap out a potentially bad kernel for one that has been 'protected' by having te emmc cap erase turned off.
Hi
I have a non branded GT-P1000 Tab. Trying to follow instructions at http://www.androidauthority.com/galaxy-tab-gt-p1000-android-4-0-4-ics-aokp-rom-97483/ to install AKOP.40 ROM
Need Clockworkmod installed.
Installed Rom Manager then attempted to install Clockworkmod - It asks me to choose my phone type. Closest options are: Galaxy Tab - ATT, Samsung Galaxy Tab - T-Mobile, Samsung galaxy tab - VZW.
What do I install, or is there another version of Clockworkmod for non Branded TAB somewhere?
Thanks ColinK
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
From Manager is not compatible with P1000
You may brick your device if you force install cwm recovery of different device.
The only method is to flash via Odin, a kernel that contains cwm recovery.
overcome kernel is one of them.
In fact it was recommended in all ICS rom install guide you find here.
Start here
http://forum.xda-developers.com/showthread.php?p=27500461
See my reply there.
Forget about reference to AOKP build 38, that was back then.
Download the latest.
Instruction remains the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi
Thanks for your prompt reply. The instructions for flashing overcome seems to have multiple steps and "IF's", with multiple opportunities to go wrong.
The android authority guide seems straightforward, and I have gone through some of it - except the guide makes no mention of how to get CWM.
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
If not, were exactly does the install part start and do I also have to install Odin?
Sorry for so many questions / uncertainty.
ColinK
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
colink said:
Hi
Is there a simple way to get the right version of CWM installed, or something else that will do the same steps / functions.
ColinK
Click to expand...
Click to collapse
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar filehttp://forum.xda-developers.com/editpost.php?do=editpost&p=29235809
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Actually you can flash a CWM.zip update without installing a kernel after you root your device.
But again, installing kernel with CWM included just like Priyana said would be a lot easier and simpler.
priyana said:
As I said before.
No, there is only ONE way to get CWM recovery for P1000.
That is to flash a kernel that has CWM Recovery.
Either cf-root kernel or Overcome Kernel or Redpill kernel.
It is dead simple.
Download the tar file
Connect to Odin.
Flash.
Now, lets start by telling us what you have. P1000 running Froyo?
Rooted?
BTW, if you follow the complete Overcome guide, 99.999% you won't go wrong, if you follow every steps.
So read it 10 times if not sure.
The GB-Stock-Safe package mentioned in Overcome and available on their site, it contains the correct version of Odin (1.7) and the USB driver for Samsung.
32 bit and 64 bit driver for Windows.
Absolutely nothing else extra is needed. All there.
Click to expand...
Click to collapse
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Hi ColinK,
Unfortunately there is no straight way to install AOKP.
I am afraid you have to follow the guide to the letter, sort of.
This is why.
Some froyo from for our tab has locked bootloader.
So if you are on froyo there is a small chance you had a locked one.
You need to root your tab then run an app to check and to patch.
(I forgot by now whether you need root to check... to patch definitely yes)
Now, that is why Overcome guide said if froyo you need to root.
It is not strickly necessary.
Now, let's assume you don't have locked bootloader.
You only need to use Odin and flash GB stock safe v5 (which is actually Gingerbread Samsung version JQ1 Italian rom)
So, you need Odin.
Unpack the gb stock safe and you find Odin and USB driver.
Install USB driver first, then plug in your tab and your PC will detect the new device.
Unplug your device.
Install Odin.
Launch Odin, put your device to download mode and plug your device in to PC.
I am not a big user of Odin. I use heimdall in Linux which is simple and just work, so my memory is sketchy.
Odin will detect your device. There will be messages on screen.
Line up the files according to the guide and flash.
If no error your tab rebooted and you have GB ROM.
that of course isn't the end because you need cwm.
So continue with the guide.
It asks you to use Odin to flash overcome kernel tar.
Do it and you will end up having cwm recovery.
That is the end of guide.
You don't need to flash overcome rom.
Just follow my other thread reply to get AOKP.
Sent from my GT-P1000 using xda app-developers app
Addition info: The easiest way to check if you are rooted or not:
Download and install 'root check' or 'got root?' from google play store.
If the rooting failed, you can try the doomslords rooting script. It was my favorite root script up to GB2.3.3
Once you succesfully rooted, continue download the bootloader patch for froyo.
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
priyana said:
I have been on AOKP for so long, all this rooting, bootloader and all are a blur now.
Click to expand...
Click to collapse
I can feel you. I can't even 100% remember if gb-stock-safe is pre-rooted or overvcome kernel gives root access for it.
colink said:
Hi Thanks for your continued help.
GT-P1000, 2.2, Baseband P1000xxjma, Kernel 2.6.32.0 [email protected]#1
The tab is completely standard, never touched until a few days ago. Followed the instrictions at Android Authority to Root using z4Root
How do I know if it is rooted? (Ie was z4 root successful).
Did Wipe Data/Factory Reset, and Wipe Cache Partition - then realised I did not have ClockworkMod recovery installed.
That is where I am now.
I hope you do not mind me asking clarifications for your instruictions. Your guide said 'jump to .. flash overconme" - where does that part start.
The quide mentions downloading a gb stock safev5.zip , an Oversome Kernel.tar and 7 series wipe.zip
Note the gb stock.zip mentions Gingerbread Based - I have Fryo (what are the implications)
But your last reply just mentions downloading the tar file and using odin
Can you see that for someone who is not familiar with all this Android jargon this is all very confusing.
I am quite competent in following instructions, but most instructions assume certain conditions (without telling me if my Tab meets those conditions), and assumes I know what eg "odin sees it" means, where is odi, where do I install it, how do I use it.
What I really want is a straightforward guide that will tell me how to install AOKP ROM Build 40 onto MY Tab, without 'go here' and 'go there' and only do this IF ...
Thanks for your help.
ColinK
Click to expand...
Click to collapse
Well Colink, I must say.....priyana's guides are one of the best ones for installing roms ...it's just perfect...I flashed my tab with aokp without even getting a single error....read the overcome guide perfectly ...I know it's a bit confusing but read it ten times and u will be just fine
Sent from my GT-P1000 using xda app-developers app
Overcome links are all down.
Overcome links are all down. Any alternatives? (Rooted gt-p1000 2.3.3 Gingerbread DXJPI
Come on,
a little search in overcome thread and should spot it.
Here is the spoiler
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
I too am trying to get the Tab up to ICS via the overcome procedure, links are down on overcome and not all the links on the tabfirmware are working, specifically the Overcome_Kernel_v4.0.0.zip doesn't work, with a nice <This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.> message.
There's also the link to the full overcome site as a screen capture or something in this post http://forum.xda-developers.com/showthread.php?p=20974872, but it's now giving a 404, so my confidence level for doing this is now low ;-(
Any help appreciated. pls, pls, pretty pls.
Don't want a bricked Tab would make me sad
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
I recommend first upgrading to 2.3.3, then flashing chainfire's modded cwm via odin:
http://www.4shared.com/zip/vsN8JA6x/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
and then flashing overcome via cwm:
http://www.ravishare.com/1fragzl971e6/Overcome_7_Series_v4.1.0_NoWipe.zip.html
then you can flash any aokp or cyanogenmod mtd build.
Upgraded to ICS and thanks
Ok so thanks to all who helped out with links to roms and guides.
I now have a lovely Galaxy Tab with ICS from AOKP.
And for anyone who would like to try but hasn't yet it really is surprisingly easy, just take your time and make sure to do it right, you won't regret the upgrade to ICS
I stood on the shoulders of giants to do this :good:.
So you use the method I posted or what Gogol posted?
Sent from my GT-P1000 using xda app-developers app
ha ha
guyz i need help in installing cwm in my rooted galaxy tab p1000 running 2.2 froyo