I try to update my android software back to froyo (2.2) using the ezbase, but the installiation freezes at:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> EZbase-PDA-XWJS3.tar.md5 is valid.
<OSM> EZbase-PHONE-XXJVE.tar.md5 is valid.
<OSM> EZbase-CSC-XXJV1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
whta i´m gonna do now??
huuuh, i already got it
lmao, just fyi, what I did last time that happened to me was to just pull the cable out, restart back to download mode, and things should be working like normal
Related
After doing tons of research its clear to me that I have to flash a stock rom with odin. I have Odin 1.8.5 and the correct PDA, Phone and CSC files (I9000XXJVU_I9000OXAJVU_OXA) but when I try to reflash with repartition on nothing happens after this point:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
After doing more research I figured that I need to use Odin 1.8.3 with the 512 pit file, but that pit file is bloody impossible to find. Then I found another post that said I should reflash with dbdata.rfs.tar without repartition and no pit file but nothing happens after this:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
The vagueness of the information I have found is also extreamly frustrating, it seems there is no noob freindly information out there about this issue, no matter how much I search so please could someone give me some noob freindly information on how to do this.
Original problem is the E: Unknown Volume error after flashing to cm7 and them restoring backup if there is another method to fixing this
http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=8&feature=plcp
CHECK THIS OUT
Issue has been resolved, I made the error of flashing the dbdata with the phone and csc files. Sorry about the useless post. Mod please lock/delete this thread
I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
It looks like you are still on recovery mode. Go to advanced and choose reboot download. Then restart the procedure. If phone is off, the press vol downl+power+home then after a confirmation screen press vol up.
provettirodolfo said:
I was coming back from CM 9.1 to Stock GB. I did wipe like Phillz stuff said, but I got stuck on:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBKK3_N7000UBKK1_N7000ZTOKK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
What do I do Now?
Click to expand...
Click to collapse
In addition to what nokia told you, check that the drivers are installed in your PC and that here is no kies process running in the task manager.
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
jordeste said:
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
Click to expand...
Click to collapse
Why are you flashing 3.5? You should have flashed 5.1. Did you read the OP for KNOXRAID FULLY?
jordeste said:
So here is the skinny;
Note 3 + Knoxraid v3.2 for sm-n900a.
I successfully flashed the kitkat version of this rom and decided to flash back to stock so I could re-root but in the process I messed up terribly.
It's been a few hours, and a few pointless hour long downloads and this is the most recent thing that;s come up
I flashed the PIT. BL. PDA. and PHONE files(mj5) and everything went fine.
My phone rebooted with the "Samsung Galaxy Note 3" logo and the little "Custom" unlock pad at the bottom.
*****Phone will not continue any further unless battery pull*****
I'm stuck and it's been about 13 hours since I started this fix.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900AUCUBMJ5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> sdi.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
How come my phone won't boot and can you walk me through this anyone???
...all of this because I wanted safestrap back, smh....
Click to expand...
Click to collapse
Follow the MJ5 restore method. Make sure you read very carefully.
http://forum.xda-developers.com/showthread.php?t=2629380
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Good News
Thanks for checking up on me guys and trying to help.
UPDATE***
My friend and I managed to flash the 4.3 stock version back on to my note 3 in which a few odd things went down:
1.) My Baseband version is the MJ5, however my Build number is M19 - what's up with that?
2.) The dreaded "Detection information" triangle keeps rearing it's ugly head and there's no remedy in sight to avoid the popup.
Other than that, I'm running just fine but I feel naked without my root privilages. 7z files won't open via 7zip and Kingo Root & Safestrap are what got me into this mess so I'm not really trying to go that route again.
Well at least you're up and running. I'd run the restore method again just to get rid of any issues--the MJ5 restore method. Then root using his method at the end; if literally takes 1 minute.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Hi! I have the S6 Edge AT&T. I currently have it on the latest firmware 5.1.1 and when I try to flash the stock rom/firmware I always get an error message. Why is that?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can't downgrade bro you're stuck on 5.1.1 I'm afraid
Sent from my SAMSUNG-SM-G925A using Tapatalk
Once you're on 5.1.1 you can not downgrade. Sucks, we'll be stuck on it for a while. I upgraded for Samsung Pay and sacrificed my root.
What if it did not finishing installing all the way. can you down grade then
nope. bootloader is the first thing flashed. that is whats keeping you from downgrading. Your stuck. Just like us.
updates?
Any updates? :/
my sisters s5 was in the process of updating and failed. it's now stuck in a boot loop saying a custom rom installed and there hasn't been. only on mine anywyays im getting these error messages when i go to flash the stock firmware and im not sure what they mean or what im doing wrong.
jondabomb541 said:
my sisters s5 was in the process of updating and failed. it's now stuck in a boot loop saying a custom rom installed and there hasn't been. only on mine anywyays im getting these error messages when i go to flash the stock firmware and im not sure what they mean or what im doing wrong.
Click to expand...
Click to collapse
this is the phone screen
jondabomb541 said:
this is the phone screen
Click to expand...
Click to collapse
What stock firmware did you try to flash?
shortydoggg said:
What stock firmware did you try to flash?
Click to expand...
Click to collapse
G900AUCU1ANCE_G900AATT1ANCE_ATT\G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
jondabomb541 said:
G900AUCU1ANCE_G900AATT1ANCE_ATT\G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5
Click to expand...
Click to collapse
That's the wrong file to flash to that phone.
I suggest you try the OI5 part of this guide, first since she wants the update.
http://forum.xda-developers.com/showthread.php?t=2785185
shortydoggg said:
That's the wrong file to flash to that phone.
I suggest you try the OI5 part of this guide, first since she wants the update.
http://forum.xda-developers.com/showthread.php?t=2785185
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
It gets stuck right here, which is normal but it's been here for an hour. should i try a different file?
I'd say start over, but this time do not flash the BL file. Do the AP, CP, and CSC files only.