Flashed Honeycomb Alpha 2.5 now have Spanish language SGT - Galaxy Tab Q&A, Help & Troubleshooting

anyone else have this problem ? I could navigate a bit in Spanish, but without a key board I was sunk.
Anyone have any experience with this problem ?
thanks in advance
Sprint 3G SGT

It's Catalan. And you prob selected the first selection in the setup wizard thingy when it first booted.
Power down. Boot into cwm and wipe the user space to wipe that setting (and all your others). Then select reboot and be careful what you click on.

Thanks for the input. I flashed back to stock, but I will reflash and proceed with care.
again thank you for the tip

I reflashed this ROM again... and the first thing I see is the EULA. then the Catalan lang start page..
dosen't matter what I do even if I touch nothing, I get no choice of English or any other language, it just starts in Catalan.
see pic below.

Related

Recurring hard reset

Hello everybody,
I'm new here and I'm looking for help.
I have a HTC Diamond on which I installed the GenY Rom with Dual Boot. After that I try to change this ROM by another version, the GenY 5.3.
But now my phone freeze without reason and when I reset it, it launch a hard reset and I loose all my parameter, contacts ...
Do you have a solution for save my phone ?
Thank you
I made a hard reset with button but there's no change. I tried to install another ROM but I have the same problem.
I don't know what I can do now :'(
Help me please.
Excuse my english too, I'm french.
Becqueta said:
I made a hard reset with button but there's no change. I tried to install another ROM but I have the same problem.
I don't know what I can do now :'(
Help me please.
Excuse my english too, I'm french.
Click to expand...
Click to collapse
Flash official HTC RUU back on your phone
I have exactly the same problem...
I tried formatting the nand flash, seems to work.
(Vol down + enter + reset, then vol down)
(Note that you will loose all data on internal storage, too...)

CWM doesnt do anything, "back button disabled", help please.

i had a custom froyo 2.2 rom (cant remember the name) and decided today to install gingerbread 2.3.
i went for cyanogen rom, downloaded the most recent one and copied it to the SD card.
then i went to recovery mode (an old CWM version that was installed the time i installed froyo). wipe everything, install zip from SD card and everything went good.
2.3 is installed and working, but cyanogen doesnt include google apps so i had to download an extra .zip that includes google apps (market, maps, etc). so i rebooted into CWM (now a new version that was installed with the rom v4.0.0.5) but now it doesnt work!
any option i choose from the CWM menu just doesnt do anything and goes back to the menu. if i scrool down the last option (to return to the first option) he writes "back menu button disabled" and if i go again it writes "back menu button enabled" but still doesnt do anything.
i search the forum and the web and found nothing, please help me because im getting scared that the phone might be broken..
thanks in advance.
saproandroid said:
i had a custom froyo 2.2 rom (cant remember the name) and decided today to install gingerbread 2.3.
i went for cyanogen rom, downloaded the most recent one and copied it to the SD card.
then i went to recovery mode (an old CWM version that was installed the time i installed froyo). wipe everything, install zip from SD card and everything went good.
2.3 is installed and working, but cyanogen doesnt include google apps so i had to download an extra .zip that includes google apps (market, maps, etc). so i rebooted into CWM (now a new version that was installed with the rom v4.0.0.5) but now it doesnt work!
any option i choose from the CWM menu just doesnt do anything and goes back to the menu. if i scrool down the last option (to return to the first option) he writes "back menu button disabled" and if i go again it writes "back menu button enabled" but still doesnt do anything.
i search the forum and the web and found nothing, please help me because im getting scared that the phone might be broken..
thanks in advance.
Click to expand...
Click to collapse
Move the cursor past the top menu choice 3 times in either direction.
Sent from my abucus
wow it worked, thanks a lot man i was getting really scared
i know it was a newbie thing but oh well, i hope this thread helps someone in the future.
thanks once again.
saproandroid said:
wow it worked, thanks a lot man i was getting really scared
i know it was a newbie thing but oh well, i hope this thread helps someone in the future.
thanks once again.
Click to expand...
Click to collapse
That's not such a newbie thing. There is info about it but it's not the easiest to find. Also the solution is not at all obvious...
Sent from my abucus
this just saved my life...thanks for the solution!
Hi
I'm facing exactly the same issue and in full panic mode right now. Please help, I didn't comprehend what you guys meant by move the cursor past the top menu choice three times.Please!
rollno88 said:
Hi
I'm facing exactly the same issue and in full panic mode right now. Please help, I didn't comprehend what you guys meant by move the cursor past the top menu choice three times.Please!
Click to expand...
Click to collapse
Use the vol + and vol - buttons to move the menu selection cursor. You can cycle through the entire menu wrapping 3 times or you can move backwards from the top choice to the bottom choice then forwards to the top choice again, etc. the source code waits for this "wrapping" to occur 3 times before it enables the back option again.
Sent from my abucus
Chezbel said:
Use the vol + and vol - buttons to move the menu selection cursor. You can cycle through the entire menu wrapping 3 times or you can move backwards from the top choice to the bottom choice then forwards to the top choice again, etc. the source code waits for this "wrapping" to occur 3 times before it enables the back option again.
Sent from my abucus
Click to expand...
Click to collapse
Thanks a ton . The issue was solved by selecting with the power button for some reason. I'd been trying that earlier but pressing it alongwith the menu button so nothing had happened. Anyways, thanks again for your help and I hope this helps some future noob!
just saved my life thanks chezbel
why does it do that??
v3rsatile23 said:
why does it do that??
Click to expand...
Click to collapse
+1. What's the rationale for it?
I think it was originally to work around some broken hardware on an old phone. There may be comments in the source code, but i haven't looked in a long time.
EDIT: /bootable/recovery/recovery.c says
// Some users with dead enter keys need a way to turn on power to select.
// Jiggering across the wrapping menu is one "secret" way to enable it.
// We can't rely on /cache or /sdcard since they may not be available.
Click to expand...
Click to collapse
And you have to "wrap" 3 times to get the back button to be enabled/disabled.
Sent from my One XXX
Thanks Chezbel, you're my hero!
Saved me too, thanks!
i had this problem once, can't remember how i unlocked the back button but i think i pressed both volume buttons at the same time and it unlocked.
Chezbel said:
Move the cursor past the top menu choice 3 times in either direction.
Sent from my abucus
Click to expand...
Click to collapse
BRO..U SAVED MY LYF
THANKS
i got scared
again thanks a lot bro
i also had the same problem in my micromax p275 tab but no vol+ or vol- button how can i go through menu im using cwm recovery thanks guys and im using cwm recovery ok

Staying optimistic....

Hi all,first off im not gonna say my tab is bricked im to much of a noob to do that,but I've gotta say I'm really worried that my tab might be toast.To cut a long story short my son gotta hold of my tab without my knowledge and flashed a rom onto it.From what i can ascertain he's not followed the instructions on installation,instead of using the computer he's downloaded a zip file with the rom on it,then he's gone into recovery mode via clockworkmod(i have rom manager app on my tab)he's then wiped the cache and the dalvik and then proceeded to install the rom from the SDcard that he'd downloaded earlier.Anyway he said it seemed to have worked because he got a message on screen saying thank you for installing overcom rom v2.0.1 hermes installation complete enjoy using it.The message was roughly like that anyway.It also said that the 1st boot could take a long time as it had to rebuild the cache and the dalvik.So wait he did,4 hours later and all that was on screen was.....GALAXY TAB
SAMSUNG......plus all the hardware keys were constantly lit.By this time id come in and discovered what he done.So i tried to put it into recovery mode so i could hopefully put another rom onto it.But when i press power and the up volume key it just goes straight to the screen i described above,I've not had a problem getting into recovery before but now zilch....Plus another thing when i plug in the charger in instead of getting the green battery symbol gradually filling up i instead get a grey battery symbol that just sits there and does nothing.
I'll be eternally grateful if anyone can get my tab going again,i bought it in the uk open to any network,so i guess its a european tab(ON BOX IT SAYS GT-P1000).Can anyone help me,I'm trying my best to stay positive lol.
Cheers dave.
Sent from my MoDaCo Custom ROM for the Advent Vega r8 using Tapatalk
Make sure your tab has enough charge (charge it if necessary by plugging it in wall socket even if there is no indication) After that try to boot it into download mode (power & volume down) or any detectable download mode by your pc. Get a stock rom from here or from anywhere (what rom was tab originally on froyo? Gingerbread?). Follow the instructions to flash that stock rom. Overcome guide has great instructions on how to restock your tab.
Kindly ask your questions in appropriate forums.
Thanks darkpal,i was on froyo,although i couldn't get into recovery mode i tried what you said,power button and volume down and was able to get into download mode.
So when i can get access to a suitable computer I'll try what you recommended.
Sorry if this post was in the wrong place my heads been all over the place since my tab has been down.
Thanks again for the tip and fingers crossed it will work. Dave
Sent from my Liquid using Tapatalk
I was about 99% sure thats what your son did. He tried loading the gingerbread overcome rom over froyo. And that resulted on a non bootable state (or as some call it soft brick). GB has different bootloaders than froyo thats why a stock gingerbread should be installed first before overcome 2.X.
Hope to see you up and running soon
Good luck man... just try everything, never give up!
It's because of the wiped dalvic cache!
ps: you should check out some bootloop problem threads. use search!

Please Help!!!!!!!

i just bricked my phone!! i was trying to flash ics chainfire repack with mobile odin. i t then restarted my phone but once it went off the screen where it says "galaxy note gt-7000 i got a blank screen
how do i fix this??
also, what have i done wrong so i dont do it again?
thanks
Press Volume Down + Home + Power for a few seconds and check if it enters download mode ?
Akiainavas said:
Press Volume Down + Home + Power for a few seconds and check if it enters download mode ?
Click to expand...
Click to collapse
thanks for the reply
yes it does enter what i presume to be download mode (up to continue, down to restart)
Boot into download mode and flash a stock rom via Odin then start over your not bricked don't worry
After you do the stock ROM via Odin and let it settle, you can try the ICS repack again. Someone here can help you, but theres already good threads out there for step by step.
One thing I can say since you asked what not to do again is use PC Odin instead of Mobile Odin. Yes, you will get a triangle but you can use triangle away to get rid of it, if you wish. I personally sport the triangle on my phone
Yeah, your phone is not bricked, no worries.
Here's a thread that will help you, make sure to get correct files and flash to stock using PC Odin:
http://forum.xda-developers.com/showthread.php?t=1424997
Thanks to dr. Ketan for his amazing job in gathering it all in one place.
thanks for all the support
as you can tell im abit of a newbie to android (iPhone owner for the last 2 years). if anything happened like this with ios you were basically screwed, so its nice to see thats not the case on android.
also this was the first major thing that had gone with my one week old device so sorry if i over-reacted :/
ps: as im abit of a newbie can anyone point me to a good tutorial for installing ICS rom's?? much appreciated
alex22808 said:
thanks for all the support
as you can tell im abit of a newbie to android (iPhone owner for the last 2 years). if anything happened like this with ios you were basically screwed, so its nice to see thats not the case on android.
also this was the first major thing that had gone with my one week old device so sorry if i over-reacted :/
ps: as im abit of a newbie can anyone point me to a good tutorial for installing ICS rom's?? much appreciated
Click to expand...
Click to collapse
Try long pressing power button and rebooting, if not downloading mode is your way, (do you have ICS rom zip into SD Card?), you will need it to flash it, goes to development threads and you can find it, you can choose one of them, actually I´m on Criskelo V2 LPC6 its good for dayly use its full working, when you got it press at same time Vol +/power button/home and enter in Clockwork mode goes to install zip from sd card, choose from sd card and ICS zip, back to menu wipe data, wipe cache, goes to advanced and wipe dalvick cache, reboot system now and follow steps introducing gmail account and its all enjoy yor NOTE with ICS.

[Q] [q] help bricked phone???

Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
jhay0017 said:
Hi guys, im using a rooted 2.3.6, then i did the partition for link2sd, and everything worked perfect, however since i downloaded some apps first before doing the partition, i decided to do factory settings on the phone settings so it would be like a fresh internal memory then begin downloading when link2sd is already placed, however after doing factory reset on settings, my phone just keep on rebooting, everytime i open it, i downloaded the firmware in sammobile, as per advised, however im not sure how to flash it. should i use ODIN, or use CWM and do this process.
Using CWM.
Copy Zip to SD Card
Reboot into recovery
Wipe Data/Factory Reset
Wipe Cache Partition
Install Zip From SD Card
Flash ROM
Reboot
or should i follow this instruction via odin
http://www.droidacid.com/how-to-flash-official-firmware-on-galaxy-ace-gt-s5830-using-odin-droidacid/
Thanks,, kindly reply to this, need help badly.
Click to expand...
Click to collapse
Woooooooooo!!!
Stop here!!!
What do you want to flash?
If you want to flash a custom rom, do wipe data/factory reset, wipw cache and go advanced and do wipe dalvik cache too then flash the custom rom you want, (It's fully recommended to follow dev's instructions so the process could change with each rom).
well if you want to flash a fresh stock you should do 3 wipes to and then use Odin with the correct firmware and finished this process you'll need to do wipe data/factory reset and wipe cache partition to complete the fresh installation of the rom, if no you'll get a bootloop.
Enventually if you want to increase your internal memory you'll need a capable kernel (cf-root, BE, Space, nims11... ) with init.d support or create it by yourself and then you'll need to use link2sd or an int2ext script (I recommend you it, because it's easer to install IMO) with you sd-ext partition created in your microsd previously
All will work fine with this configuration
If you have any kind of question, ask here and we'll try to help you
WAHH OMG i didnt wait for your reply
wahh. what will happen, heres what i did
ACCESS CWM
wipe/factory reset 1x
wipe cache 1x
install from zip (Sll v10)
then reboot
it worked, however you mentioned i should do it 3x, and the one in advance option, but i didnt do it, should i repeat the process with your instruction?..
anyway it's working fine so far, it's not Galaxy SIII though i think what i have is Galaxy SII even when i open and turn off phone it says Galaxy SII..
and the interface already change I mean the design of everything, however my Menu button won't open my Menu, i need to open it using the soft touch application, however the menu hard button is working if i want to go to the main screen and long press access task manager.
do i still need to repeat the process w/ this.
wipe/factory reset 3x
wipe cache 3x
wipe the delvak cache in advance option 1x
install from zip (Sll v10)
then reboot
hoping for your reply
hi,, heres what i did should i change it?
Viper The Ripper said:
Woooooooooo!!!
Stop here!!!
What do you want to flash?
If you want to flash a custom rom, do wipe data/factory reset, wipw cache and go advanced and do wipe dalvik cache too then flash the custom rom you want, (It's fully recommended to follow dev's instructions so the process could change with each rom).
well if you want to flash a fresh stock you should do 3 wipes to and then use Odin with the correct firmware and finished this process you'll need to do wipe data/factory reset and wipe cache partition to complete the fresh installation of the rom, if no you'll get a bootloop.
Enventually if you want to increase your internal memory you'll need a capable kernel (cf-root, BE, Space, nims11... ) with init.d support or create it by yourself and then you'll need to use link2sd or an int2ext script (I recommend you it, because it's easer to install IMO) with you sd-ext partition created in your microsd previously
All will work fine with this configuration
If you have any kind of question, ask here and we'll try to help you
Click to expand...
Click to collapse
wahh. what will happen, heres what i did
ACCESS CWM
wipe/factory reset 1x
wipe cache 1x
install from zip (Sll v10)
then reboot
it worked, however you mentioned i should do it 3x, and the one in advance option, but i didnt do it, should i repeat the process with your instruction?..
anyway it's working fine so far, it's not Galaxy SIII though i think what i have is Galaxy SII even when i open and turn off phone it says Galaxy SII..
and the interface already change I mean the design of everything, however my Menu button won't open my Menu, i need to open it using the soft touch application, however the menu hard button is working if i want to go to the main screen and long press access task manager.
do i still need to repeat the process w/ this.
wipe/factory reset 3x
wipe cache 3x
wipe the delvak cache in advance option 1x
install from zip (Sll v10)
then reboot
hoping for your reply
jhay0017 said:
wahh. what will happen, heres what i did
ACCESS CWM
wipe/factory reset 1x
wipe cache 1x
install from zip (Sll v10)
then reboot
it worked, however you mentioned i should do it 3x, and the one in advance option, but i didnt do it, should i repeat the process with your instruction?..
anyway it's working fine so far, it's not Galaxy SIII though i think what i have is Galaxy SII even when i open and turn off phone it says Galaxy SII..
and the interface already change I mean the design of everything, however my Menu button won't open my Menu, i need to open it using the soft touch application, however the menu hard button is working if i want to go to the main screen and long press access task manager.
do i still need to repeat the process w/ this.
wipe/factory reset 3x
wipe cache 3x
wipe the delvak cache in advance option 1x
install from zip (Sll v10)
then reboot
hoping for your reply
Click to expand...
Click to collapse
well it is not bad, but if I were you I'd do "wipe dalvik-cache too" to keep as clean as possible my new rom
About de menu button, I don't know maybe a rom bug??... try another ro.
and ALWAYS FOLLOW DEV'S INSTRUCTION TO FLASH CORRECTLY A NEW ROM
Finally to flash a fresh rom you can follow the C prompt from this guide; (the guide you posted, It's right too )
http://forum.xda-developers.com/showthread.php?t=1034145
Hi everyone here!
I had a difficult question. I made a mistake and flashed a s5360 stockrom on a s5830i. Now I could not enter any bootmode trying every keys and combinations. The phone starts and I can read samsung galaxy young gt-s5360 but only the topleft 2/3 of the screen is used. The rest is a bunch of colorful pixel. After some seconds I here the samsung startsound and then a small stripe of the screen shows me a part of a normal started phone. But I see not more then the time and the upper symbols. The phone seems to run. But I dont know? Is there anything I can do for it or is there no possibility if the bootmodes are not reachable.
I had no idea! Is there someone who has a tip for me? I think I could send the telefon to restart in downloadmode, but I dont know how to do because I cant see what happend when I press some keys. I think the system is running, it sounds when pressing vol+ or vol- and vibrates when pressing powerbutton. Thank you for every idea what I could try.
nnenemk said:
Hi everyone here!
I had a difficult question. I made a mistake and flashed a s5360 stockrom on a s5830i. Now I could not enter any bootmode trying every keys and combinations. The phone starts and I can read samsung galaxy young gt-s5360 but only the topleft 2/3 of the screen is used. The rest is a bunch of colorful pixel. After some seconds I here the samsung startsound and then a small stripe of the screen shows me a part of a normal started phone. But I see not more then the time and the upper symbols. The phone seems to run. But I dont know? Is there anything I can do for it or is there no possibility if the bootmodes are not reachable.
I had no idea! Is there someone who has a tip for me? I think I could send the telefon to restart in downloadmode, but I dont know how to do because I cant see what happend when I press some keys. I think the system is running, it sounds when pressing vol+ or vol- and vibrates when pressing powerbutton. Thank you for every idea what I could try.
Click to expand...
Click to collapse
First of all this is a GTs5830 q&a thread, but well, can you boot in download mode?¿
Try to flash a fresh stock rom, all that you need is here
http://forum.xda-developers.com/showthread.php?t=1551156
After mourning a moment because it looks like that there is no help for my s5830i, i have another question. With open case I see, on the back in the bottom left between battery and a screw, a connector. Never saw this before though I opened the case many times. It is or was a nice testing device for me. And I tested many ROMs, Mods etc. with it. I dont know what this small connector is? It looks like other small connectors and the innercase has a whole on its position, it seems to be there that a cable could be connected to the device. Does anyone know why there is such an connector on the device? Is it possible that there is something like a serial gateway to the device? Is there someone with knowledge about this?
---------- Post added at 07:10 PM ---------- Previous post was at 07:05 PM ----------
Sorry about the bad placing of my question. I could not enter any bootmode, i wrote before!
---------- Post added at 07:27 PM ---------- Previous post was at 07:10 PM ----------
I will ask more simple: Is there any possiblity to bring the phone in downloadmode if pressing the keys during start is not functional?
Or Another idee and another question: Is there a chance to manipulate the phone through USB, to bring it up in downloadmode?
nnenemk said:
After mourning a moment because it looks like that there is no help for my s5830i, i have another question. With open case I see, on the back in the bottom left between battery and a screw, a connector. Never saw this before though I opened the case many times. It is or was a nice testing device for me. And I tested many ROMs, Mods etc. with it. I dont know what this small connector is? It looks like other small connectors and the innercase has a whole on its position, it seems to be there that a cable could be connected to the device. Does anyone know why there is such an connector on the device? Is it possible that there is something like a serial gateway to the device? Is there someone with knowledge about this?
---------- Post added at 07:10 PM ---------- Previous post was at 07:05 PM ----------
Sorry about the bad placing of my question. I could not enter any bootmode, i wrote before!
---------- Post added at 07:27 PM ---------- Previous post was at 07:10 PM ----------
I will ask more simple: Is there any possiblity to bring the phone in downloadmode if pressing the keys during start is not functional?
Or Another idee and another question: Is there a chance to manipulate the phone through USB, to bring it up in downloadmode?
Click to expand...
Click to collapse
Is your phone a galaxy y ? Are you not able to see what appears on your screen & hence not sure what mode is it entering ? I have a solution ! First google to find an xda thread to flash stock via odin for your device, download all the required files & setup odin. Now once you have setup odin, power off your phone. Simultaneously hold home+power+volume down button. Let whatever appear on your screen but just be sure that the phone is on. Connect your phone to pc via usb cable. If odin recognises the com port & displays as detected, you are good to go ! Just flash according to the instructions !
Sent from my GT-S5830 using xda premium
Thank you for your answer! First the phone with the problem is a galaxy ace gt-s5830i. Until some weeks ago I also had a galaxy young. Thats why I have also stockroms for the young. Then I made a mistake (It was sunday in the morning, sometimes not a good time to flash . I used a stockrom from the Galaxy young gt-s5360 for the ace. Now the ace starts and seems to run but theres a problem with the output of the screen, so I cant see what happend.
But my real problem is that I could not enter any bootmode. I used all keys and every combinations more then one times, but nothing works. Either the downloadmode nor the recoverymode are appearing. So I will follow your advice and will try to bring up the phone in downloadmode regardless what happend on the screen. But Im not really optimistic because every time, Ive start the phone holding a keycombination, the phone doesnt reacts and a few seconds later I hear the samsung startsound. Thats why I think I couldnt reach the downloadmode anymore. And I also tested to what happend if the phone is connect through USB. Odin recognices the Interface, I mean the yellow field with comX appears, but until now every time I start the transfer the logoutput displays "connection failed" and the field above the yellow field goes red. But Im still testing your idea.
Ive also another question. I sadly looked at the ace with the prolem, thinking if there is anything I could do, as I saw what I think is a connector for whatever. With case opened it is left under the battery. I dont know what it is and asked myself if this could be anything like a seriell interface. I find something similar on my galaxy 3. But there is a diffrent connector next to the battery left. Is there any knowledge about this connectors or whatever it is?
nnenemk said:
Thank you for your answer! First the phone with the problem is a galaxy ace gt-s5830i. Until some weeks ago I also had a galaxy young. Thats why I have also stockroms for the young. Then I made a mistake (It was sunday in the morning, sometimes not a good time to flash . I used a stockrom from the Galaxy young gt-s5360 for the ace. Now the ace starts and seems to run but theres a problem with the output of the screen, so I cant see what happend.
But my real problem is that I could not enter any bootmode. I used all keys and every combinations more then one times, but nothing works. Either the downloadmode nor the recoverymode are appearing. So I will follow your advice and will try to bring up the phone in downloadmode regardless what happend on the screen. But Im not really optimistic because every time, Ive start the phone holding a keycombination, the phone doesnt reacts and a few seconds later I hear the samsung startsound. Thats why I think I couldnt reach the downloadmode anymore. And I also tested to what happend if the phone is connect through USB. Odin recognices the Interface, I mean the yellow field with comX appears, but until now every time I start the transfer the logoutput displays "connection failed" and the field above the yellow field goes red. But Im still testing your idea.
Ive also another question. I sadly looked at the ace with the prolem, thinking if there is anything I could do, as I saw what I think is a connector for whatever. With case opened it is left under the battery. I dont know what it is and asked myself if this could be anything like a seriell interface. I find something similar on my galaxy 3. But there is a diffrent connector next to the battery left. Is there any knowledge about this connectors or whatever it is?
Click to expand...
Click to collapse
There are only two ports for the ace. One to connect the charger/usb & the other to plug in the headphones. As I said earlier, try to flash stock via odin. But by what you have quoted earlier, I don't think it should be a problem if odin recognises your phone. Just keep trying, if you don't find success, you may have to try jtag. Again jtag kit costs you. If I were you after no success, I'd definitely take it to the service center. If they can't start your phone & if they can't see what's happening on your screen, they'll definitely try to flash a new bootloader, which should bring your phone back to life. Worst case, they may replace the motherboard, which I think won't happen. After flashing the bootloader, they'll say that your phone's software was modified & that your warranty is void. But now you've got a new bootloader & you can go flash via odin As easy as that
Sent from my GT-S5830 using xda premium

Categories

Resources