Related
Hello All,
I tried to install the “(VALLE-MOD)HoneyComb theme v.1.1!! MAJOR UPDATE with some minor fixes!”
From: http://forum.xda-developers.com/showthread.php?t=958788
And the “[THEME]Generation X - V2.0 CYAN&HARD-BLUE ADDED - JPU/X/Y/JS3 - 4LOCK [04-02-11]________________________________________
From: http://forum.xda-developers.com/showthread.php?t=898892
I start the phone in the recovery mode (CWR) and tried to apply the “Install from zip file”
I receive notification that the THEME was installed successfully but when I reboot the phone it stuck with the Galaxy icon.
And I have to apply the rom again.
I saw the application Z4control that can install theme with this app but I couldn’t find where to download or how to install it.
Can any one send me detailed guide how to install theme or how to install the z4control
Thanks in advance
Shlomi
I have the Generation X - V2.0 RED installed on my galaxy S using Darky's ROM and itt works fine.
This is how I install mine:
1. Install Darky's config app from the market and set your preferences. I use voodoo kernel + no modem install + all the other options.
2. Reboot in recovery and install the room from the zip
3. Reboot the phone and let it do it's thing to configure the room.
4. Unlock your SIM and make sure the phone works with the ROM
5. If all is well reboot in recovery and install the theme from the zip
6. Reboot and enjoy.
Now some questions, based on your symptoms sounds like a ROM issue and not a theme issue. Did your phone boot OK after you installed darky's ?
Also what model do you have I9000, I9000-M, T959, T959-D, etc .. ?
Hi Rebbinio,
Thank you for your quick reply.
I ibstall the rom, boot the phone, use darky's configuration tool, every things works.
Now i boot to cwr and applied the theme, everything goes fine but the phone won't boot.
I think i did everything you did except from uninstallung the modem and my phone was unlocked so....
I don't know, someone told me i should delete the framework.jar from the thene????,
Why did you click on "Update from zip"? ...
if you are on Darky´s ROM you just put the Theme on the INTERNAL SD Card... Reboot to recovery and flash it
HowTo:
Reboot to recovery
choose "Install zip from sdcard"
choose "zip from sdcard"
Look for the theme and click on it
Then scroll down to YES
Go back
REBOOT
The theme should now be installed and everything should be working
SAEVARM3 said:
Why did you click on "Update from zip"? ...
Click to expand...
Click to collapse
Sorry I didn't choose the "update from zip"
I choose the Install from zip and then I select the theme and it get stuck after the reboot.
these are the steps I took:
1. wipe the device.
2. install Darly's rom.
3. reboot the device and use Darky's configuration tool.
4. boot into CWR
5. select install from zip - and I choose the theme.
6. I received the message that the theme was installed successfully
7. reboot the device - now it get stuck.
so what did I do wrong??
Thanks
Shlomi
mr-blue001 said:
Hello All,
I tried to install the “(VALLE-MOD)HoneyComb theme v.1.1!! MAJOR UPDATE with some minor fixes!”
From: http://forum.xda-developers.com/showthread.php?t=958788
And the “[THEME]Generation X - V2.0 CYAN&HARD-BLUE ADDED - JPU/X/Y/JS3 - 4LOCK [04-02-11]________________________________________
From: http://forum.xda-developers.com/showthread.php?t=898892
I start the phone in the recovery mode (CWR) and tried to apply the “update from zip file”
I receive notification that the THEME was installed successfully but when I reboot the phone it stuck with the Galaxy icon.
And I have to apply the rom again.
I saw the application Z4control that can install theme with this app but I couldn’t find where to download or how to install it.
Can any one send me detailed guide how to install theme or how to install the z4control
Thanks in advance
Shlomi
Click to expand...
Click to collapse
mr-blue001 this is what you've posted.You should click on "Install zip from sdcard" and then "choose zip from sdcard".
mr-blue001 said:
Sorry I didn't choose the "update from zip"
I choose the Install from zip and then I select the theme and it get stuck after the reboot.
these are the steps I took:
1. wipe the device.
2. install Darly's rom.
3. reboot the device and use Darky's configuration tool.
4. boot into CWR
5. select install from zip - and I choose the theme.
6. I received the message that the theme was installed successfully
7. reboot the device - now it get stuck.
so what did I do wrong??
Thanks
Shlomi
Click to expand...
Click to collapse
Maybe you can try backup and then delete "bootanimation.zip" from system/menu using root explorer first. Then try flash the theme again. If after the flash you got stock bootanimation galaxy s, don't worry just paste back the bootanimation.zip or you can flash other bootanimation.zip thru CWM. That is what I did when I flash Honeycom theme on Darky 9.3 beta3 ROM. And of course give them sometime to reboot. Hope you make it.
the same probleme please help
darky's rom 9.2 extremeafter download most of themes
1. boot into CWR
2. select install from zip - and I choose the theme.
3. I received the message that the theme was installed successfully
4. reboot the device - now it get stuck.
I wrote by mistake "update from sip"
actually i choose "install from zip"
the installation completed successfully but still the phone stuck showin the Galaxy icon
any advise?
Thanks
Shlomi
You're still using the wrong option - read again what saevearm3 wrote...
Sent from my GT-I9000 using XDA App
my device is the Galaxy S i9000
and i tried to use the theme with and without the boot animation.
it stuck in the first dcreen when you boot the phone the one with "Samsung" and the "Galaxy S gt-i9000".
it doesn't look lie getting to the boot animation....
any idea??
Thanks again
Shlomi
Benson17 said:
You're still using the wrong option - read again what saevearm3 wrote...
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I did Exactly as Saevearm3 and little_brather did, still the same results
I'll try again and keep you updated.
Thank you all
Nice theme
It's CWM, not CWR! lol ^^
disable lagfixs or tweeks if you use any . just a thought
Sent from my GT-I9000 using XDA App
I have the same problem. And I think that Darky makes too much change in the rom. So no one existing theme can't be install.
it must be write speсialy for Darky's rom 10 RC6
IMHO
thankssssss
damnn i didnt find this thread earlier Like Shlomi's facing theme issues, me to facing Theme Issues
SGS: I9000
ROM: Darky's Rom 10.2 EE
Hello Nookers,
I myself and pndo1 of XDA have posted guides for dual booting CM7 and Stock 1.2. My first one was crappy, my second one was a little less crappy, and pndo1's was pretty good, but had too many steps. So yeah, I decided to clear this up once and for all. Alright, enough of that garbage, let's get on with the guide!
0. Make a CWM sd card using these instructions.
1. Download CM7 to your sd card. I recommend the latest version from here. Also, if you would like to overclock download this. Lastly, if you would like to remap Volume + and - to Menu and Back, download this too. Also, your gonna want (duh) have a copy of Nook Color Stock 1.2. This one is the best in my opinion. Also, if you would like to root Stock 1.2, get this. Now get gapps from here. Almost! Download thishere. And now the multiuboot! Grr... this is tiring... but lasties! Get it here. Put ALL the files you downloaded on your SD Card.
1. Boot into CWM. Go into Backup+Restore and create a backup. Then go into Mounts+Storage and unmount the sd card. Put in an MicroSD reader in your computer. Navigate to /sdcard/clockworkmod/ and find the backup. Copy it to your computer. You can now delete it from the SD Card. Put the SD Card back in the nook. Go into Mounts+Storage and hit "Mount sd card" Now from the same place, wipe system, data, and cache. Now go to the root menu (hit the power button once). Hit "Install zip from sd card" then "Choose zip from sd card" Select prep.dualboot.zip. Then redo the choose zip Select your downloaded 1.2 Zip. It should be called "update_nc_stock_1.2_keepcwm.zip" Flash that. Now wait for it to install. Reboot your Nook. It will boot and will ask you to setup the Nook. Set it up but if you don't have wifi, follow these instructions. After setting up, boot back into CWM using your sd card.
2. Now Choose the zip from sd again, but select ManualNooter. That will take one minute to flash. Reboot again. Make sure your root is setup. To confirm, download an app from the market. Any app.
3. Once that is done, boot back into CWM. Flash the zip "eclair-to-dualboot-0.2.zip" It will duplicate Stock 1.2 to the Second partition. Now go into Mounts+Storage, and wipe system+data+cache. Now choose zip again, but this time pick CM7. Then Choose again, pick GAPPS. Then anything else, like that KeysMod or OC kernel. Now flash Multi-Uboot-0.3.zip. Now reboot without holding anything. It should boot CM7. Reboot, but this time hold the home button. BAM! Stock 1.2. Hope it worked for ya!
To those whom it doesn't work:
yelloguy said:
I had the same problems as everyone else is reporting on this thread. I did this on Tuesday without the benefit of this guide but with the help of other two mentioned in the OP.
So after talking to iKingBlack via PM, I tried it again yesterday. And here is the exact sequence of events in case it helps anyone.
Install removal script for dual boot found in these forums
Install stock 1.2 from the link mentioned in OP
Boot 1.2 and register the device
Sleep 7.5 hours and then chat with iKingBlack
Install manual nooter, then the apk enabler
Boot 1.2 to check root access
(no boot from now on)
Install prep dual boot
Install eclair to dual boot
Format system, data and cache
Install CM7 nightly
Install gapps
Install multi boot
Reboot holding N and check stock works as it used to
Reboot normally, check CM7 works and set it up
Since then I have used both partitions successfully.
Click to expand...
Click to collapse
Credits:
@GirLuvsDroid for the feedback and testing
@GabrialDestruir for 1.2 Manual Nooter
@Koush for ROM Manager and CWM Flashes
@yellowguy for telling us to flash prep.dualboot
@Anyone else who helped but escapes my mind at the moment
@pndo1 (Who has moved on to better things than our little NC's... aka Flyer) for this orignal project
I've been wanting to dual boot my NC for a while now, but I've read several sets of instructions and kept getting twisted up in them. I was also concerned that having a dual boot would make it difficult to impossible to continue installing the CM7 nightlies and the latest Dal kernels.
These instructions look really clear and easy to follow and I thank you for that!
I just want to clarify my understanding: both CM7 and stock 1.2 are run from eMMC, correct? And, because stock 1.2 is on the second partition, it's just business as usual to install the nightlies and the latest kernel on the first partition, right?
Again, thanks for taking the time to rework your instructions again. Your contributions are much appreciated!
Why a special uboot? Stock cm7 uboot (based on bn 1.2) already does multiboot... (hold down n on boot for info) and dalingrin's nook tweaks lets you set up default options from prefs menu...
That said, I didn't read the instructions carefully so maybe there's a reason...
@GirLuvsDroid Your welcome, and yes both run from the emmc. Flash nightlies and kernel like anything. Just nothing to the dual boot partition.
@fattire For me the CM7 Alternate boot option hangs. But again, that's me.
I may have just missed it, but I didn't see where in the instructions to download the Multi-Boot-Uboot-0.3.zip file.
I found and downloaded v0.4 file from this thread
http://forum.xda-developers.com/showthread.php?t=947698
and it doesn't quite work right. It boots CM7 fine, but it hangs on the Nook 'N' screen when booting into stock 1.2. I'm not sure if that's because of the v0.4 multi-boot file, or because of something else I did wrong. (It did boot into stock 1.2 correctly at the point where you said it would in the instructions).
Any thoughts, or the link to the v0.3 multi-boot zip and I'll flash that to see if it corrects the problem.
MHotovec said:
I may have just missed it, but I didn't see where in the instructions to download the Multi-Boot-Uboot-0.3.zip file.
I found and downloaded v0.4 file from this thread
http://forum.xda-developers.com/showthread.php?t=947698
and it doesn't quite work right. It boots CM7 fine, but it hangs on the Nook 'N' screen when booting into stock 1.2. I'm not sure if that's because of the v0.4 multi-boot file, or because of something else I did wrong. (It did boot into stock 1.2 correctly at the point where you said it would in the instructions).
Any thoughts, or the link to the v0.3 multi-boot zip and I'll flash that to see if it corrects the problem.
Click to expand...
Click to collapse
MH, it's the link in the OP that says this: "Last one (yes, really!) here." It's not the Multi-Boot-Uboot-0.3.zip but the eclair-to-dualboot-0.2.zip.
Disgregard this post -- I'm an idiot and apparently blind, as well.
Thanks GLD.
I'll reflash that one (I flashed both, just like the directions said ) and see if that makes it behave better.
MHotovec said:
Thanks GLD.
I'll reflash that one (I flashed both, just like the directions said ) and see if that makes it behave better.
Click to expand...
Click to collapse
I must be blind -- I don't see where it says to flash both. I only see the eclair-to-dualboot in the instructions.
Nevermind -- I found it. It's the last step. I stand corrected and I'm glad I do because I'm planning to do this when I get home from work tonight. Thanks for setting me straight!
Reflashing the eclair to dualboot wasn't the answer, now is doesn't even TRY to boot the stock 1.2.
Now where did I leave that drawing board....
I found the download link for the Multi-Boot-Uboot-0.3.zip:
http://api.viglink.com/api/click?fo...dified u-boot.bin based on B&N 1.2 source
GLD, if anyone tells you that you're not a goddess, you tell them that I said you are.
Of course, that didn't solve the problem. (sigh)
I ran the entire routine again, and this time used the v.03 multi-boot that you found, same problem. It will boot into CM7 just fine, but it hangs up when booting into stock.
ahhhhhh, that's just so sweet, MH!
I just went through the whole process myself and everything went perfectly right up until I tried to boot into stock 1.2. Exactly like you, it hangs on the N and won't boot up. CM7 boots just fine, though.
Well, at least I know it's not just me.
By any chance, have you run the app that changes your Nooks RAM from 'new way' to 'old way'? (1gb data, 5gb apps).
I have, I wondering if that has something to do with it (just fishing of course, it's not like I actually KNOW anything).
Yes, I had a blue dot NC that I repartioned, but I did it using the custom partition (around 2GB data).
Well, multi-boot link added.
Oh, to those whom it doesn't work (stuck on N), try flashing 1.2 zip and manual nooter without rebooting and then eclair2dualboot then wipe system,data, and cache. Then flash cm7 and goodies. Not one reboot. Try it and only then say if it works or doesn't.
I'll try this no-boot method when I get a chance tomorrow. One question for you -- assuming I get this to work, is there any reason I can't restore /data from the CWM backup of my original setup that I made before I started the dual boot process?
I get the same result with the no boot method. CM7 boots fine, Nook stock hangs on the 'N' screen.
I had the same problems as everyone else is reporting on this thread. I did this on Tuesday without the benefit of this guide but with the help of other two mentioned in the OP.
So after talking to iKingBlack via PM, I tried it again yesterday. And here is the exact sequence of events in case it helps anyone.
Install removal script for dual boot found in these forums
Install stock 1.2 from the link mentioned in OP
Boot 1.2 and register the device
Sleep 7.5 hours and then chat with iKingBlack
Install manual nooter, then the apk enabler
Boot 1.2 to check root access
(no boot from now on)
Install prep dual boot
Install eclair to dual boot
Format system, data and cache
Install CM7 nightly
Install gapps
Install multi boot
Reboot holding N and check stock works as it used to
Reboot normally, check CM7 works and set it up
Since then I have used both partitions successfully.
@GLD Yes, I think you can restore safely.
@yellowguy You don't need prep dual boot because eclair2dualboot already takes care of that. And if my instructions didn't work, try yellowguys, a slightly refined method.
Hi guys
I am newbie and till now I dint rooted my phone. Today I am going to root my phone and Flash ICS ROM. Please confirm the following steps are correct-
1) Download hardcore's Kernel with the ClockworkMod Recovery 2.5
2) Install Heimdall Suite 1.3.1
3) after doing all the settings and chosing correct options, flashing teh kernal -Heimdall Suite 1.3.1
4) Disable the lagfix
5) Backup your data via Titanium Backup
6) do a Nandroid backup in recovery, just for case
7) download and save build_14 and gapps_7.1 to your internal SDcard.
8) turn off your phone.
9) go to recovery via 3BC.
10) factory reset+wipe cache
11) flash the Devil_1.0_BFS.zip
12) flash the build_15 rom 0r rc4.1 rom
13) flash the gapps
14) Flash the faceunlock
15) factory reset+wipe cache
16) reboot
Is these steps are right. Please confirm so that I can do my >: porting
better check this out, its lot more simpler and detailed. best of luck.
( when i was newbie i used to visit there..... )
http://androidadvices(dot)com/info/samsung/galaxy-s-i9000/
Please Ignore
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
edizarca said:
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Just flash it again ...see quick fix and solutions link below
xsenman said:
Just flash it again ...see quick fix and solutions link below
Click to expand...
Click to collapse
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
edizarca said:
I cannot see what will help me on this page, but I understand how flashing again could work.
But how with the situation I have?
Click to expand...
Click to collapse
are you not able to get into recovery? If only download than you need to get back to GB and than do a progressive update from GB to ICS to JB
Flash it again. From what I've heard, it only flashes the kernel the first time.
I had the same problem today with CM7 today. Just reboot in recovery and flash again cm zip, form there on everything is gonna run smooth!
edizarca said:
Hello,
I'm not gonna panic, as I think Ive not bricked my phone YET.
Here is what I have done, I have a GALAXY S I9000.
Have been using it for quite some time now. 2 years ago, I have flashed it with - hardcore's kernel with the ClockworkMod Recovery - using Odin.
Today I decided to give Cyanogenmod a go, followed the steps here. - http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide
Since I have the hardoce's kernel, I skipped this Installing the ClockworkMod Recovery - and moved on to - Flashing CyanogenMod.
I will go step by step from here.
Download the latest version of CyanogenMod.
Optional: Download the Google Apps for the device.
Place the CyanogenMod update.zip file on the root of the internal memory.
Optional: Place the Google Apps .zip on the root of the internal memory also.
Boot into the ClockworkMod Recovery.
Once the device boots into the ClockworkMod Recovery, use the side volume buttons to move around, and either the power button or the trackball to select.
Select the option to Wipe data/factory reset.
Then select the option to Wipe cache partition.
Select Install zip from sdcard.
done these, no problem so far.
[*]Select Choose zip from sdcard.
when I chose this, phone rebooted, it was so fast something may have come up and I didnt see.
Now I am stuck in a boot loop:
- Galaxy S I9000 samsung screen comes up, goes away for a second, comes up again.
- A page with code appearing from the bottom comes up really fast ( logo in the middle changes quickly) then it disappears.
- whole thing starts again.
UPDATE: I got a picture of the fast screen that comes up. : http://localhostr.com/files/b5NzFRy/2012-08-27 05.07.32.jpg
Some observations.
- I can go into download mode when opening it with the key combo.
- loop only stops when I unplug the battery
I need advice on what caused this and how to fix this, please help me.
Click to expand...
Click to collapse
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Thanks!, this method worked a treat :highfive:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
kvarug01 said:
Anyone have a trick yet for CM 10.1 v.22 Nightly, I keep getting a bootloop on all their versions except the original one. This is so frustrating because I have to keep going back to stock and then update to ICS.
Click to expand...
Click to collapse
Same here, after the Samsung and CM logos, and splash animation, it says :
"Encryption unsuccessful.
Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
To resume using your phone, you must perform a factory reset...."
After I tap Reset phone, it goes to CWM recovery.
Do the factory reset and the same thing occured in loop.
I came from JVU and CF root.
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
How long should the first boot take after following these steps? And does it have to be from SDCARD, because I can't get the rom onto my sd card, I can only do it via usb otg cable
---------- Post added at 05:11 AM ---------- Previous post was at 04:34 AM ----------
anukilimanoor said:
Installation Procedure for CM9
If you have CWM Recovery
Copy both zip files int internal SDCARD
Boot into recovery
Do a full wipe (data/factory,cache, dalvik)
Install zip from sdcard
Choose zip from sdcard
Select the ROM
You will get boot loop
Again boot into recovery
Install the same zip file one more time
Install google app
Do a full wipe again (data/factory,cache,dalvik)
Reboot your phone
Enjoy...
Click to expand...
Click to collapse
Does it have to be from the sdcard or can you do it from a flash drive via usb otg. I cannot get the rom onto my sd card
paradiselost28 said:
Hi,
I had the same pb coming from a GB
I think this pb is very common
1) DON'T WORRY !
2) Unplug the battery when bootlooping
3) Put the SGS in Recovery Mode (the CWM's version has changed)
4) Select the CM .zip and flash it AGAIN
5) When it's done, reboot system
This time, everything shoot be OK
Just be carefull with your IMEI (always have a backup of EFS folder !)
Click to expand...
Click to collapse
The same thing happend to me.
Just plug out the battery and flash again on cwm recovery.
Sent from my GT-I9000 using XDA Premium 4 mobile app
I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.
AllieB said:
I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.
m1batt1 said:
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.
Click to expand...
Click to collapse
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
First of all you're getting a little ahead of yourself in trying to get to CM10 from where you are. Being on 2.2 you will need to get to a gingerbread ROM first as the bootloaders are different and will cause issues trying to go to CM10 if you don't go to gingerbread first.
The following link will take you to some one-click utilities that will update you to gingerbread along with the needed bootloaders. Also I suggest picking one from the list that says it has a CWM kernel injected so that you can save a step after the flash and have a CWM recovery kernel already installed.
Once you've used the one-click you shouldn't need to flash either of the kernels you've mentioned you should technically be able to just flash the CM10 and be good. Although when it comes to flashing the CM10 I suggest you go to the creaters thread or site and follow their exact directions for installing!
AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
I highly recommend you install official cm instead. They are updated and will be more stable.
Sent from a jelly bean