Ive just flashed ficeto's jvp and now want to try TweakyRom. However, in the guide it says to make you have gingerbread bootloaders. How do i check if i have them and if not how do i get them?
If your jvp is working then you have gb bootloaders, to change bootloaders use ezboot in dev section
Sent from my GT-I9000 using XDA Premium App
slaphead20 said:
If your jvp is working then you have gb bootloaders, to change bootloaders use ezboot in dev section
Are you sure I have the bootloaders? I dont want to mess this.up
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
seeraj15 said:
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Well to be safe in your own mind just flash ezboot gb, then you are certain!
Insanity cm 012/glitch
If you have Froyo bootloaders but Gingerbread ROM, you'll se multicoloured stripes while booting.
Related
Ive just flashed juwe's 5.0 and now there is no baseband version meaning i cant make or recieve calls or anything like that. What do i do?
You've flashed correctly and done all the steps described in the flashing manual? If you had Froyo before: did you flash a Gingerbread-firmware including bootloader?
Lunchbox115 said:
You've flashed correctly and done all the steps described in the flashing manual? If you had Froyo before: did you flash a Gingerbread-firmware including bootloader?
Click to expand...
Click to collapse
I was on gingerbread jvp so I assumed I already had the gingerbread bootloaders, correct?
Sent from my GT-I9000 using XDA App
Well, if you update from Froyo to Ginger via Odin you have to flash a Ginger-vresion including the bootloaders (here on XDA there are mostyl versions WITH and version WITHOUT bootloader available, and you need one WITH bl.).
You could try to flash a modem seperatly with Odin, but normally everything should work with Juwe's 5.0.
But i wasnt on froyo, i was on gingerbread so i must of already had gingerbread bootloaders? Anyway if i didnt have the bootloaders why did it still boot me into juwe 5.0?
Hm, ok. Were you able to make calls with your previous Ginger-ROM?
If I was you I'd flash stock-Ginger again and - if the telephone-function works - flash Juwe's 5.0.
Yes I was able to make calls.
Sent from my GT-I9000 using XDA App
seeraj15 said:
Yes I was able to make calls. How should I flash stock gingerbread. Atm I am back on jvp with dark core 2.7.3.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Just flash a modem!
U can pick the JVP one from my rom addons
Sent from my GT-I9000 using XDA Premium App
simone201 said:
Just flash a modem!
U can pick the JVP one from my rom addons
But I'm not on your rom, will it matter?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
seeraj15 said:
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
simone201 said:
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Not correct, there are seperatly modems for CM7 for example. But for Samsung-based ROMs you are right.
simone201 said:
Modems are UNIVERSAL for ALL roms!
Flash directly with no probs
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I cant find the jvp one from your addons
Sent from my GT-I9000 using XDA App
I've tried everything to get cwm installed. I did the new att bootloader. Now nothing I do will get me out of sight verified 3e.
Sent from my GT-P7510 using XDA Premium App
A little more info would help. What rom are you using, did you try using Rom Manager? If you are on Gingerbread bootloaders you can flash KF1 with Cognition 5 Beta kernel, it has CWM.
I'm using the kf1 one click. I was looking at the latest kernels and none were for Odin.
Sent from my GT-P7510 using XDA Premium App
Before I went looking for old odin kernels though I would ask if anyone knew what was up.
Sent from my GT-P7510 using XDA Premium App
X10D3 said:
I'm using the kf1 one click. I was looking at the latest kernels and none were for Odin.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
You can use this kernel Cognition 5. Thats a KF1 based rom, that kernal has CWM and it works with stock KF1.
So i just got a new cappy on exchange from bby and have some questions prior to roming.
I had a 1007 build and got a 1010. What root methods are good for preloaded 2.2?
Can i odin one click to 2.1 like with my first one and root from there?
Sent from my SAMSUNG-SGH-I897 using xda premium
If you are going to flash a custom rom there is no need to root. Flash speedmod kernel with odin to get cwm and flash rom in recovery.
If you want a gingerbread rom the added step of flashing gingerbread bootloaders is required. Still no need to root.
But if you were going to root, super one click would be the way.
Thank you
Sent from my SAMSUNG-SGH-I897 using xda premium
Also that Odin one click (JF6) doesn't work well with builds 1010 and later.
Sent from my SGH-I897 using xda premium
Is there anyway to return to stock safely?
Sent from my SAMSUNG-SGH-I897 using xda premium
JKelley103 said:
Is there anyway to return to stock safely?
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
I think you can use the full Odin and flash a stock firmware. If you are GB bootloaders you will have to flash back to froyo/eclair bootloaders... which, flashing btldrs is not necessarily safe, just keep the cat and dog out of the room so they don't rip the cord out mid flash
Sent from my SGH-I897 using xda premium
Hello most of the root guides for this phone are vague and not well done. Anyone have a detailed easy way to root the captivate?
Sent from my phone using xda premium
Here ya go... [Utility] KK4 Easy Root
Sent from my SAMSUNG-SGH-I777 using xda premium
@4-2ndtwin
I'm currently using KH2 (Gingerbread 2.3.3) for I896, can I still use KK4 Easy Root ?
Sorry, noob here
dont worry..captivate is unbrickable phone..
Sent from my SGH-I897 using XDA
musashi32 said:
@4-2ndtwin
I'm currently using KH2 (Gingerbread 2.3.3) for I896, can I still use KK4 Easy Root ?
Sorry, noob here
Click to expand...
Click to collapse
Yep. U r good to go.
Sent from my SAMSUNG-SGH-I777 using xda premium
mrlengfung said:
dont worry..captivate is unbrickable phone..
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Uhhh...not true.
Sent from my SAMSUNG-SGH-I777 using xda premium
!
You could always flash a rom that prerouted. Cyanogenmod roms all come pre flashed and allow you to keep up to date with modern phones. (allows you to go up to Ice cream sandwich 4.0.4! Also Its not unbrickable by any means. I accidentally came very close to bricking my captivate when i first started modding it. Luckily I got a jig and jigged the crap out of it! HAHA
Yesterday I tried to flash semaphore kernel with odin for my cappy but I ended up getting into a boot loop and had to restore it with my jig.. Any suggestions for what went wrong?
PS. I was trying to flash it cause I want a JB rom
Sent from my SGH-I896 using xda app-developers app
camxv said:
Yesterday I tried to flash semaphore kernel with odin for my cappy but I ended up getting into a boot loop and had to restore it with my jig.. Any suggestions for what went wrong?
PS. I was trying to flash it cause I want a JB rom
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
What version... Because had an earlier build and caused that... He said it was an accident and too use newer one
Sent from my SAMSUNG-SGH-I747 using xda premium
I used semaphore_2.5.0sc.tar
Sent from my SGH-I896 using xda app-developers app
camxv said:
I used semaphore_2.5.0sc.tar
Sent from my SGH-I896 using xda app-developers app
Click to expand...
Click to collapse
Did you have repartition checked or unchecked? Needs to be unchecked when flashing kernels. If i remember correctly, i used cm10 to get to jb. All i had to do flash the ROM twice in recovery. First time was to get CWM 6 loaded, then the actual ROM flashed no issues, kernel included
It was unchecked.. and I was flashing semaphore kernel specifically because it would root my cappy.
Sent from my SGH-I896 using xda app-developers app
If u r back on Stock KK4, then the KK4 Corn Kernel has CWM Recovery and u can get Root within that recovery as well. I recommend version 7.0A http://forum.xda-developers.com/showthread.php?p=18233847
If u need Stock KK4...here it is...http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
If u r back on Stock KK4, then the KK4 Corn Kernel has CWM Recovery and u can get Root within that recovery as well. I recommend version 7.0A http://forum.xda-developers.com/showthread.php?p=18233847
If u need Stock KK4...here it is...http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
This is what I'm running on my cappy. Stock rogers 2.3.3
Sent from my SGH-I896 using xda app-developers app
I meant to attach this photo
Sent from my SGH-I896 using xda app-developers app
4-2ndtwin said:
If u r back on Stock KK4, then the KK4 Corn Kernel has CWM Recovery and u can get Root within that recovery as well. I recommend version 7.0A http://forum.xda-developers.com/showthread.php?p=18233847
If u need Stock KK4...here it is...http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Any specific reason why I would flash version 7.0A instead of 7.01 <-- (What im going to flash, cause I couldn't find download for 7.0A) or newer versions like 7.06?
7.0A is just the baseline version...and really all u need if u r just gonna flash a custom rom..but any of the corn kernels will do.
Links are in the OP. (or should be ?? ----they r workin for me)
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
7.0A is just the baseline version...and really all u need if u r just gonna flash a custom rom..but any of the corn kernels will do.
Links are in the OP. (or should be ?? ----they r workin for me)
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Alright, thanks. Nope, I see all of the other links except for version 7.0A
Ok, so I flashed corn kernel version 7.01.. everything worked fine.. but how do i get root access now?
There is an option in the cwm recovery...maybe under advanced options...don't remember exactly, but it is there.
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
There is an option in the cwm recovery...maybe under advanced options...don't remember exactly, but it is there.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Found it