Tk-Glitch said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These kernels are provided as-is without warranty. I'm not responsible for any problem you can encounter with your phone or if your cat suddenly dies.
Although, don't expect support even if I will eventually help since I love cats.
Note : These kernels are only compatible with CM7 and MIUI roms !
Do you want to discuss on this kernel, get the fresh news on development, or become a kernel tester ?
Join the IRC channel from your web browser herehttp://irc.shadowcard.net:1337/?channels=glitch ! No registration needed
Make sure the channel is "#Glitch" and you're set.
For those who already have an IRC client,
here is the server : irc.shadowcard.net
port : 6667
Channel : #Glitch
Overview :
- Up to 1.7GHz CPU OC with added bus/GPU OC (Thanks to morfic for the great base of work)
- Undervolting using Pimp my CPU or Voltage Control
- Voodoo Sound - & Voodoo Color, using VC versions (Thanks Supercurio & renaudallard)
- FPS uncap (Screen running 68Hz instead of 60Hz, from 56 to 66 FPS max) from JPX source
- Various tweaks for more smoothness and reliability
- LED notifications
CHANGELOGS IN #2 POSTThe frequency/voltage & informative UV settings table is as follow for latest kernel :
Note that these UV settings will be unstable on many devices. It's only informative.
1700 MHz - [email protected] 243 MHz - 1.500v / -> Most phones will fail here. -25 to -50mV may help to stabilize. Much stabler as unique frequency for benchmarks.
1600 MHz - [email protected] 229 MHz - 1.500V / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1500 MHz - [email protected] 250 MHz - 1.500V / -25mV
1440 MHz - [email protected] 240 MHz - 1.475V / -50mV
1400 MHz - [email protected] 233 MHz - 1.450V / -50mV
1300 MHz - [email protected] 217 MHz - 1.400V / -50mV
1200 MHz - [email protected] 200 MHz - 1.350V / -50mV
1000 MHz - [email protected] 200 MHz - 1.250V / -50mV - If you have stability issues, try to let this one by default.
800 MHz - [email protected] 200 MHz - 1.200V / -75mV
400 MHz - [email protected] 200 MHz - 1.050V / -100mV
200 MHz - [email protected] 200 MHz - 0.950V / -150mV
100 MHz - [email protected] 100 MHz - 0.950V / -200mV - (can be very different between two devices)
GPU frequency is linked to bus speed
More volts is not always equal to more stability. Try to add more UV (less volts) if the frequency you're trying to achieve is unstable.
Considering all phones will respond differently to OC/UV, to tweak the values to suit your device will be required.
By default, no overclock/undervolt is applied. You'll need to use one of the tools below to adjust the frequencies and voltages.
-Pimp My CPU (recommended if you're using MIUI) : http://forum.xda-developers.com/showthread.php?t=1018411
-Voltage Control : http://forum.xda-developers.com/showthread.php?t=829731
-SetCPU (newest versions only) : http://forum.xda-developers.com/showthread.php?t=505419
Downloads
If you're switching kernels, have issues with auto-rotation, the cam, bootloops or other sorts of problem (failed overclock attempt),
please use lippol94's updated cleaning script (apply via CWM recovery) : http://forum.xda-developers.com/showthread.php?p=15609632#post15609632
CWM flashable zip :
Glitch kernel
12 B3
sixstringsg said:
Here you all go. Changelog: (I will make it prettier in the morning, I've been building kernels all day)
Screenstate scaling configurable via recovery
Recovery theme
Backup/resore voltages via recovery
BLN (disabled by default, use the BLN control app or Blinky to enable it)
Upsream synced (this includes LPM)
Other various upstream tweaks
Works with the latest nightly
Here are the builds: Don't forget to press the Thanks button
http://androtransfer.com/tk-glitch/...or/CM7Vibrant-Glitch-DEV-HL-20110922_2206.zip HL
http://androtransfer.com/tk-glitch/...or/CM7Vibrant-Glitch-DEV-ML-20110922_2207.zip ML
http://androtransfer.com/tk-glitch/...or/CM7Vibrant-Glitch-DEV-LL-20110922_2209.zip LL
Click to expand...
Click to collapse
V12 BETA 2 REQUIRES FROYO BOOTLOADER !
- 13/08/2011 - V12 beta 2(High leakage)
OLDER RELEASESFTP ROOT (all kernels are here)[/INDENT]
FAQ :
What are the differences between High, Medium and Low leakage ?
All produced chips aren't equal, and some will be "better shaped" than others, using power more efficiently and heating less. This new concept I added in V11 tends to cover most chips, depending on their quality.
The idea is to modify some internal voltage values of the SoC to help a good CPU in a poor environment (GPU/controller/memory) to shine. Of course it won't do miracles if your CPU is poor to begin with, but it's a very rare case.
Low leakage chips are the best on the paper, needing less volts and heating less than others.
High leakage represents the majority of produced chips in our SGS.
I found with beta testers that even if a chip looks poor at OC/UV at first, it'll generally have much potential still. I was able to get a 1.2GHz no UV max stable GS to 1.5GHz -50mV rock solid, and even able to push 1.7GHz for benchmarking and other tests using this new concept.
Of course this is all new and it'll take some time and heavy testing to find best settings for most devices, but I think it's a very interesting thing, and I hope I'll be able to find a way to change modes on-the-fly, making this function a must in the future especially in OC/UV kernels.
How do I enable logcat in V11+ ?
In V11, the logger is now built as a module to lower overhead and to help battery life.
To enable it, just open a terminal emulator and type "logcat-on", then reboot.
To disable it, type "logcat-off" instead. (without quotes !)
I get reboots when I try to load Voodoo Sound module !
This function, available in Voodoo Control Plus app, is ONLY for kernels NOT SUPPORTING Voodoo Sound (like stock CM7 kernel for example). You'll only generate conflicts trying to load this module. Voodoo Sound is built-in on Glitch kernel and nothing more has to be loaded for it to work.
-------------------------
Source :
- Github :https://github.com/Tk-Glitch
Credits :
Codeworkx, Atinm, GuiPerPT, Unhelpful, Coolya, Morfic, Zacharias.maladroit, Bilboa1, TheEscapist, Netarchy, Supercurio, lippol94, MAMBO04, Galnet, nitr8, Rahulrulez, Chadouming, renaudallard, existz, times_infinity, bearsfan85
Thanks to the donators, it's much appreciated and encourages me to continue my work !
Kickassdave, Donre, Gabby131, Coreym, Sambwel, Shaolin95, Sixstringsg, HaiKaiDo, Grondinm
Thanks to Sixstringsg who provides us an FTP hosting and helping on the Captivate thread !
Thanks to HaiKaiDo who provides us an IRC server !
Thanks to the beta testers team and to everyone helping me to debug and find new useful things to integrate !
Without all of you, this kernel wouldn't be !
Click to expand...
Click to collapse
You can always look here for download links as well
Changelog
Code:
B3 Changes
- BackLightNotifications (BLN) port, thanks to Zacharias.maladroit (not fully working ATM)
- Some cleaning and more tiny fixes
- Fascinate : fix for low volume/mic problems
- *Temporary* fix for green tint (reborn/still not fixed in V11 - not yet proper though)
- Modified color multiplier to avoid yellowish color by default
- Enhanced cleaning script when flashing
- Screen undervolt (from 3.0V to 2.6V) - it should help battery life
- Lowering kernel debugger buffer
- More work on leakage values
- Upstream Synced (note: update to the newest nightly before flashing this kernel)
- Themed recovery
- Tweakable volume levels in both speaker gain, and mic gain.
-- To tweak these, grab the zip hereunzip it (don't flash it) and place it in /etc/init.d Modify the file how you see fit through a text editor, there are instructions in the comments. Then reboot for it to take effect.
- ...More to come...
What's next / most is available through V12 Beta 2
Actual changelog of the dev build, with already implemented stuff as well as mostly implemented stuff
- BackLightNotifications (BLN) port, thanks to Zacharias.maladroit // not fully working ATM, replaced back by Kangsterizer's LED notifications in V12 beta 2
- Some cleaning and added tiny fixes
- Fascinate : fix for low volume/mic problems from jt1134
- Fascinate : Now using Yamaha compass driver from ED01
- *Temporary* fix for green flashes/colors on low brightness (reborn/still not fixed in V11 - not yet proper though)
- Modified color multiplier to avoid yellowish tint by default
- Enhanced cleaning script when flashing
- Screen undervolt (from 3.0V to 2.6V) // it should help battery life
- Lowering kernel debugger buffer
- More work on leakage values
- Adding some old-school (V9D) CFLAGS resulting in substantial performance and stability gains
- 800MHz random lock fixed - not fully fixed it seems
- Popping keyboard bug fixed
- Make use of NEON accelerated mfpu
- Slightly more aggressive ondemand governor default settings // searching the best balance for efficiency
- Added a few speed enhancements
...More to come...
V11
LATEST - 13/07/2011 - V11
- Upstream synced as always (updated recovery...)
- More debug stuff disabled & cleanups/fixes on various things
- Printk disabled to reduce overhead
- Updated to linux kernel 2.6.35.13
- OC implementation fixes and modifications (fixing overvolt in Voltage Control Xtreme as well as some other tiny things)
- Added experimental GPU OC implementation from TheExcapist (for future use / not yet functional)
- 1.7GHz step added - working on some pretty good phones
- Modified touchkey/Led notifications settings from Zacharias.maladroit
- Added SLQB
- Added SIO and BFQ schedulers
- Back to LZO compression for faster boot time
- New voltage settings for more stability
- Trying some new speed tweaks
- Better memory management
- 340MB of RAM available for user without breaking 720p recording
- Preemptible Tiny RCU
- Automated per tty task groups patch
- Added InteractiveX governor
- Two new branches for OC settings adapted to high and low leakage chips
- Toolchain sorcery, thanks to Zacharias.maladroit (RIL is compiled using 4.4.3 toolchain, and everything else is compiled using 4.5.2 toolchain -> more speed and stability)
- Enhanced Voodoo Color settings from renaudallard
- Voodoo Sound V10
- Allow CPU-supported unaligned accesses
- Logcat on/off scripts (built as module)
- Bluetooth HID support
- New, cleaner bootlogo
- Now cleaning old scripts, OC values, cache and dalvik cache on kernel installation - thanks to lippol94
- Green tint on low brightness fixed
- Switched to ondemand governor
sixstringsg said:
To all who like to stay up to date on every nightly, heres a great tool to do it. It downloads the latest nightly, performs a nandroid, flashes the nightly, flashes glitch, then reboots, every night ay 4 a.m. or whenever you want it to. http://forum.xda-developers.com/showthread.php?t=1198065
Click to expand...
Click to collapse
Please note that I am just the thread maintainer, sixstringsg and/or Tk-glitch are the developers of the kernel.
looks tasty
Working perfectly for me!
Sent from my SGH-T959 using XDA Premium App
lightninbug said:
Working perfectly for me!
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
how is it? battery life? speed? smooth?
xriderx66 said:
how is it? battery life? speed? smooth?
Click to expand...
Click to collapse
did you really just ask about battery life, 29 minutes after it was posted?
Yea it does! This will need to be modified for us vibrants correct?
Back from space using a Galaxy S, running Gingerbread.
No he has a vibrant version, he just never made a thread here.
Lol now that's funny
Yeah you only need an hour to determine battery life
Sent from my SGH-T959 using XDA App
adamcooks said:
did you really just ask about battery life, 29 minutes after it was posted?
Click to expand...
Click to collapse
jrosarioaz said:
Lol now that's funny
Yeah you only need an hour to determine battery life
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
To be slightly more fair though, there's been a Vibrant version for a while now. A lot of people just didn't know about it since it's only in the i9000 forum.
jrosarioaz said:
Lol now that's funny
Yeah you only need an hour to determine battery life
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
jneal9 said:
To be slightly more fair though, there's been a Vibrant version for a while now. A lot of people just didn't know about it since it's only in the i9000 forum.
Click to expand...
Click to collapse
exactly!
it's been out for a while.
scrizz said:
Click to expand...
Click to collapse
dont make me drive to tampa and hide the bacon
Ok every time I try to install a kernal I loose my data I tried flashing a modem and it still doesn't work I'm using miui anyone have any ideas on how I can fix this?
jrosarioaz said:
Lol now that's funny
Yeah you only need an hour to determine battery life
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Actually, YES!
go flash the worst kernel you can, for vibrant wait a hour, you can easily tell how good or bad battery life is.its not exact to the point and is very inaccurate, but it does giveyou a sense of how much it lasts.
Don't you try to troll me.
I'm one of the only trolls on vibrant section and I'll kick your vibrants bump on the back.
ceoesquad said:
Ok every time I try to install a kernal I loose my data I tried flashing a modem and it still doesn't work I'm using miui anyone have any ideas on how I can fix this?
Click to expand...
Click to collapse
Isn't data and signal based with modems? Can't be sure, but after flashing this, flash a modem
xriderx66 said:
Isn't data and signal based with modems? Can't be sure, but after flashing this, flash a modem
Click to expand...
Click to collapse
I tried that it didn't work I tried flashing kb5 and ka7 no luck data still wont work
xriderx66 said:
Actually, YES!
go flash the worst kernel you can, for vibrant wait a hour, you can easily tell how good or bad battery life is.its not exact to the point and is very inaccurate, but it does giveyou a sense of how much it lasts.
Don't you try to troll me.
I'm one of the only trolls on vibrant section and I'll kick your vibrants bump on the back.
Click to expand...
Click to collapse
To a point your right, you can get a general "vibe" of how the Vibrant kernel will perform for battery (See what I did there? XD)
What you will get is a low end estimate of how it will perform.
As far as data is concerned check the settings, also what nightly are you on
bearsfan85 said:
To a point your right, you can get a general "vibe" of how the Vibrant kernel will perform for battery (See what I did there? XD)
What you will get is a low end estimate of how it will perform.
As far as data is concerned check the settings, also what nightly are you on
Click to expand...
Click to collapse
Im using miui the latest one
ceoesquad said:
Ok every time I try to install a kernal I loose my data I tried flashing a modem and it still doesn't work I'm using miui anyone have any ideas on how I can fix this?
Click to expand...
Click to collapse
The rom you're using has the older rils and modem partioning that's not compatible with new kernels.
Segnaro said:
The rom you're using has the older rils and modem partioning that's not compatible with new kernels.
Click to expand...
Click to collapse
Even tho I have the latest miui rom that just came out this past Fri
Nice thank you sir.
Related
Hi all, welcome to SwiftExtreme MIUI/CM kernel
Version-20112011 is the final version of SwiftExtreme, I'm not going to release any kernel in MIUI/CM in XDA, there 2 reasons :
1. I got more than 800 downloads in kernel, but I rarely see people saying thanks(you can see my thanks only around 100, compared with 800 downloads), so I think I don't have a reason to publish my works in XDA anymore. I'm going to make SwiftExtreme to support ICS later, and only need to be release on our local forum that know how to thanks for hardwork
2. Some version of ROM include my kernel without notice me that kernel is used as their kernel ROM. I don't have a problem with that, but please tell me, so I know how is the kernel spread around the globe.
I hope everyone can enjoy my latest kernel, and work with patch that I provide againts CM kernel source code(October 19,2011)
WARNING : YOU'LL GET A LITTLE DELAY IN WAKEUP SCREEN PROCESS/CALLING ACCEPT
Kernel-20112011 - FINAL
Features :
-[20112011] Add autogroup to increase interactivity when screen on
-[20112011] Add autogroup to background process, it will reduce background process trying to get cpu attention by grouping process tasks, slightly increase battery lifetime
-[20112011] Update kernel to 2.6.32.48, more bug fixing
-[20112011] Reduce backlight voltage need, slightly increase battery lifetime
-[20112011] Introduce Powersaving version, the different is, powersaving doesn't have spare frequency at screen off, based on my testing, it increase lifetime around 10-20%, but gives you more delay when switching screen state
-[20112011] Introduce ability to turn off second core at specific frequency, slightly increase battery lifetime, read this http://forum.xda-developers.com/showpost.php?p=19419710&postcount=334
-[13112011] Reduce cpu voltage a little bit
-[20112011] Add voltage in some area to increase stability
-[13112011] Increase second core turn on frequency limit threshold and delay second core turn on, faster second core turn off. It should increase your battery lifetime when doing light task, like reading facebook, scrolling homescreen/drawer, watching movies, etc
-[12112011] Enable EXT2 and LED fix problem
-[12112011] DDR Undervolt
-[12112011] Return back to 216Mhz as lowest stock, introduce +100Mhz as spare frequency to make kernel can breath a little when doing task at screen off. It should make your screen turn on much faster and reduce MP3 glitch. With this method, kernel will work at 216Mhz-316Mhz at screen off
-[12112011] Add Simpe I/O as kernel default scheduler, watch out for tweakpack, it may change kernel scheduler on one its script
-[12112011] Now compiled with gcc 4.6 with -Ofast option
-[12112011] Implement some patch that fix memory leak, optimize lowmemorykiller function, and mmc sleep mode
-[05112011A] Now compatible in nightly CM and MIUI begins from 1.11.4 version
-[05112011A] reduce some volt in lowest clock and sdram
-[05112011A] use git SHA-1, it should speedup kernel boot process upto 11%
-[05112011A] Improve memcpy and memmove kernel performance
-[05112011A] CRC32 algorithm optimization. it should increase any activities that use CRC32 algoritm
-[05112011] Replace deadline with noop as kernel I/O scheduler
-[05112011] Compiler cflags optimization, use O3 right now....
-[05112011] Increase standby frequency clock to 256Mhz instead 216Mhz, slightly increase screen/phone call wakeup, battery drain itself doesn't change too much, still around 20% in 7 hours 3G, all sync ON in my area while standby.
-[05112011] cgroup speedup
-[05112011] Introduce file sync disabled, it boost kernel write algoritm with slightly increase rate data corrupt when your phone get crash(use androbench to bench the write speedup, bench first before flash the kernel to see the different). beside write access speedup, it make MIUI more smooth, faster installing apks, and in some games it seems the loading much faster
-[05112011] Increase TCP initial congestion window to 10 and initial receive window
-[05112011] Remove Jhash3, replace with Jhash speed tweak
-Provide 1.5Ghz and 1.2Ghz version(use PimpmyCPU to control clock and voltage)
-Excellent standby power management(Make sure you remove any script that control screen state ON/OFF when using this kernel, it will mess the kernel mechanism)
-[30102011]JHASH 3.0 patch
-SLQB as default allocator
-[30102011]Deadline I/O Kernel patch NAND storage optimize
-Improve scheduler latency
-Voodoo V1 sound driver
**********************
HOC-20112011
SwiftExtreme-1.5Ghz
LOC-20112011
SwiftExtreme-1.2Ghz
POWERSAVING-HOC-20112011
PowerSaving-SwiftExtreme-1.5Ghz
POWERSAVING-LOC-20112011
PowerSaving-SwiftExtreme-1.2Ghz
**********************
HOC-13112011
SwiftExtreme 1.5Ghz
LOC-13112011
SwiftExtreme 1.2Ghz
**********************
LOC-12112011-Preview works for MIUI begin 1.11.4 version and CM
SwiftExtreme 1.2Ghz
edit : an update if you get SOD when testing preview version
SwiftExtreme 1.2Ghz-Test
**********************
HOC-05112011A works for MIUI begin 1.11.4 version and CM
SwiftExtreme 1.5Ghz
LOC-05112011A works for MIUI begin 1.11.4 version and CM
SwiftExtreme-1.2Ghz
**********************
HOC-05112011 works for MIUI before 1.11.4 version
SwiftExtreme 1.5Ghz
LOC-05112011 works for MIUI before 1.11.4 version
SwiftExtreme 1.2Ghz
**********************
HOC-30102011
SwiftExtreme 1.5Ghz
LOC-30102011
SwiftExtreme 1.2Ghz
**********************
Credits :
Morfic, Benee, Cpasjuste, kiljacken, Supercurio, arighi, faux123, pals in kaskus.us forum
DIFF PATCH CODE: DIFF PATCH
Thanks for muffindrg that provide benchmark score Quadrant and Antutu...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tips increasing battery life :
1. Build your rom installation with Toogle2G, it helps a lot battery drain when screen off. 3G only active while screen ON, and get turn off automatically back to 2G when screen OFF.
2. Pick correct baseband, better signal, more battery life
3. When you're using script in init.d, just make sure you don't have lot of scripts that do looping on background. eventhough it only takes small amount resources
fire3d got it running on stock, based on his testing, brightness not working on stock, check it:
http://forum.xda-developers.com/showpost.php?p=19241088&postcount=181
nice work mate!
can you tell me what the benefits are when you compare it with VorkKernel?
owain94 said:
nice work mate!
can you tell me what the benefits are when you compare it with VorkKernel?
Click to expand...
Click to collapse
I can't promise anything, the only thing that I can tell, you'll get Excelent Standby Time...
fajarep said:
I can't promise anything, the only thing that I can tell, you'll get Excelent Standby Time...
Click to expand...
Click to collapse
then im gonna flash it right now
do i need to remove my setCPU screen off profile?
owain94 said:
then im gonna flash it right now
do i need to remove my setCPU screen off profile?
Click to expand...
Click to collapse
Yes.., it will mess the kernel screen off handling
fajarep said:
Yes.., it will mess the kernel screen off handling
Click to expand...
Click to collapse
thanks for your help mate! will give you feedback after a couple days of use
nice work buddy
I take it that this should also work with cm7?
deadmetal said:
I take it that this should also work with cm7?
Click to expand...
Click to collapse
I think it will work with cm7 rc1, because MIUI use that as base.
Sent from my Optimus 2X using XDA App
Thanks for your work, I'll try and report back
Thanks for your job
But i have BSOD after a call with SwiftExtreme HOC-30102011
on MIUI 1.10.28
el_liberator said:
Thanks for your job
But i have BSOD after a call with SwiftExtreme HOC-30102011
on MIUI 1.10.28
Click to expand...
Click to collapse
I'm already test it for 3 days, got no problem receiving call, there is a probability that your phone doesn't support low clock when in call... If your phone doesn't support it.., SwiftExtreme is not for you .
maybe on next version, gonna make SetCPU compatible, so it can make "on call" frequency control..
cheers
fajarep said:
I'm already test it for 3 days, got no problem receiving call, there is a probability that your phone doesn't support low clock when in call... If your phone doesn't support it.., SwiftExtreme is not for you .
maybe on next version, gonna make SetCPU compatible, so it can make "on call" frequency control..
cheers
Click to expand...
Click to collapse
i'm using Vorkkernel without problems
with your Kernel, Setcpu or CPU Master must be turned off?
When you're in call, screen off. When screen off, kernel down clock mechanism get triggered. So, your phone probably not support low clock when in call. This kernel down clock when screen off is the most important feature of this kernel.
Sent from my Optimus 2X using XDA App
el_liberator said:
i'm using Vorkkernel without problems
with your Kernel, Setcpu or CPU Master must be turned off?
Click to expand...
Click to collapse
just read his first post:
fajarep said:
-Excellent standby power management(Make sure you remove any script that control screen state ON/OFF when using this kernel, it will mess the kernel mechanism)
Click to expand...
Click to collapse
fajarep said:
When you're in call, screen off. When screen off, kernel down clock mechanism get triggered. So, your phone probably not support low clock when in call. This kernel down clock when screen off is the most important feature of this kernel.
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
OK , Thanks , i disabled option "in call" and "Screen off" on CPU Master
and works fine
Works great on 1.10.28, thank you.
Sent from my Optimus 2X using XDA App
Can't wait till someone gets this supported on the G2x
The same problems here. In call my phone freeze and i can't respond to any call. When i try to unlock it my phone don't wake up and i need to quit the batery and wait for a new freeze. I can uninstal this kernel or i need to put another one?
vladutz9 said:
The same problems here. In call my phone freeze and i can't respond to any call. When i try to unlock it my phone don't wake up and i need to quit the batery and wait for a new freeze. I can uninstal this kernel or i need to put another one?
Click to expand...
Click to collapse
just try with max OC 1.2..
LuPuS Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LuPuS-ARC/S-STOCK KERNEL HERE!!
LuPuS-JB-CM10/AOKP KERNEL HERE
Hi most of you already know my LuPuS-Stock kernel so thought i'd make one for you all that will work with any
cm9 based roms such as AOKP-by Supervenom and Paranoid Android, and obviously CM9 as well. Just wanna say a
big thanks to FXP - Jerpelea for pointing me in the rite direction for wifi to work
and of course the people who help me test besttt and sinkster for testing on both ARC-S and ARC
What i'm going to do is just update this by the end of the week to add everything else in.
So here is whats added so far but first it has to be done ------------
Disclaimer
Code:
[COLOR="DarkOrchid"]#include[/COLOR] [COLOR="Magenta"][/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.
*/
[COLOR="Magenta"]#if[/COLOR]
You have a [COLOR="DarkGreen"]question[/COLOR] post it in the [COLOR="DarkRed"]thread[/COLOR],
Instead of [COLOR="DarkGreen"]Pm'ing me[/COLOR], as other users may
experience your [COLOR="DarkRed"]problems[/COLOR]
[COLOR="Magenta"]#endif[/COLOR][/COLOR]
What Works --
Wifi - (flash modules)
Data
Camera
Panorama
Video Recording (720p now works)
Video Playback
Front Camera
Bluetooth
Everything Else that works on FXP
What doesn't work --
Anything that doesn't work on FXP
Included in kernel
[/LIST]
Added Io-schedulers --
- Noop
- Anticipatory
- Deadline
- CFQ
- BFQ
- SIO
Added Governors --
- lagfree
- brazillianwax
- smoothass
- scary
- savagedzen
- smartass
- smartassv2
- interactivex
- minmax
- powersave
- performance
- conservative
- ondemand
- interactive
- userspace
+
Lulzactive - Thanks to Tegrak
Based on Interactive and Smartass. When workload is greater than or equal to 60%, the governor scales up
CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step.
When screen is off, frequency is locked to global scaling minimum frequency
Virtuous
Virtuous is a modded smartassV2 which gives even more battery time then smartassV2
Intellidemand - Thanks to faux123
This is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling,
and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such.
Intellidemand does not jump to highest frequency when screen is off.
Lazy - Thanks to Ezekeel
The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand.
Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state
on a step overriding sampling interval.
Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always
select the maximum frequency while the screen is off.
-Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
-Lionheart:
Is a conservative-based governor. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1024Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Superbad -
A "superbad" super smooth rendition of a highly optimized "smartass" governor!
Darkside -
A "slightly more agressive smart" optimized governor!
What else-----
-SLQB - (SLAB allocator with Queue)-(both)
This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate).
- Added Cleancache
- Supports ext 2,3
- Updated zRam
- Lzo compression/decompression speed has doubled on average.
- Init.d support
- Fudgeswap
- And much more
- O/C and stable upto 2ghz, although I do not recommend O/C to 2ghz for long periods of time, do so at your own risk.
Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time
Code:
http://i.imgur.com/xtWNL.png
Downloads in post 2
I would like to say a big thanks to -
FXP - Sources/help with wifi (thanks Jerpelea)
Cyanogenmod - Sources
DooMLoRD - for patches and all the work he has done for Xpeeria's
xeozus
NobodyAtAll
Faux123
Erasmus
Leedroid
Jerpelea
Anyone missing please PM me
Sinkster - Testing for ARC
besttt - testing for ARC-S
tempest918 - For the New Logo
Please Click Thanks :good:
Kernel sources -b ics
https://github.com/garwedgess/LuPuS-CM-iCs
Changelog
*** Previous changelog was messed up so I'll include everything in here ***
Code:
[B][U]v3[/U][/B]
- All previous boot issues / issues fixed
- Improved Battery Life alot :)
- Thumbee support
- EXT 2/3 & 4 supported
- Init.d supported
- Init.d scripts added (run at boot)
- SLQB Memory allocator
- ARM7 optimizations
- Brought OC back down to 1.6 max (no need for it above 1.6 unless u want to kill your device)
- Kernel sources completely reworked started from scratch o Sony xx.587 sources
- Tiny RCU
- Updatedd patched and fixed LZO
- lowered vfs cache pressure
- Increased Wifi- Range and added support for channel 14
- 0 % Battery patch - Thanks @ Bazoocaze
- Better memory copy
- Better memory move
- Deep sleep issue fixed
- LMK Optimizations (LowMemoryKiller)
- VDD support (voltage conrol)
- Linaro Optimzations
- Compaction added
- KSM
- CIFS (improved support)
- NTFS
- Updated to newest SIO Io-Scheduler
- Google Snappy Compress & Decompress
- Added Vibrate To Recovery (Notification to enter CWM)
- Wifi module size drasticly reduced
** Possibly missing a few things **
Downloads
If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
Thank you to members -
~ Frenchdroid
~ [user_99]
For your kind donations
ARC/S CM9 KERNEL
LuPuS-ARC-CM9.img
MD5 = 0638186df6b258457ed440e76991f6fa
Wifi modules in attachments
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Check your MD5 match the above if not re-download
Zram is not enabled by default- to enable it flash the zip below
If for whatever reason you want to disable it after you have flashed the .zip, just go to ect/init.d and delete 00zram :victory:
CIFS
The attached zip for CIFS is not a flashable zip read below
Make sure you download Cifs-v2 if your using v2 of kernel
What is CIFS???
Server Message Block (SMB) or Common Internet File System (CIFS) are normally used to provide shared access to files on a network, mostly involving computers running MS Windows.
It allows you to conveniently mount/unmount your network accessible file resources and access the files transparently via your favourite Android app (playing music / videos, accessing documents etc.) Settings are stored on your SD card with permissions to write also to your SD card.
Instructions
- extract cifsfile.zip from below
- save cifs,ko file to your sdcard
- in terminal emulator
- cd sdcard
- su
- insmod cifs.ko
Now download CifsManager or similar app and configure it
Ooh, was waiting for it. Gonna try that as soon as I get to office (home PC doesn't recognize fastboot mode :-\)
Sent from nowhere
tajimura said:
Ooh, was waiting for it. Gonna try that as soon as I get to office (home PC doesn't recognize fastboot mode :-\)
Sent from nowhere
Click to expand...
Click to collapse
try to install drivers for x10 from drivers folder in flashtool instalation folder.
i gotta try this kernel tomorow
Sent From Xperia Arc - CM10 Using Xda Premium!
Marchello1 said:
try to install drivers for x10 from drivers folder in flashtool instalation folder.
i gotta try this kernel tomorow
Sent From Xperia Arc - CM10 Using Xda Premium!
Click to expand...
Click to collapse
All drivers are in place, and I can use Flash mode, but when I connect in fastboot mode (blue led) Flashtool says "phone connected in flash mode" and fastboot itself complains that there are no connected devices.
Sent from nowhere
tajimura said:
All drivers are in place, and I can use Flash mode, but when I connect in fastboot mode (blue led) Flashtool says "phone connected in flash mode" and fastboot itself complains that there are no connected devices.
Sent from nowhere
Click to expand...
Click to collapse
Reinstalled flashtool recently, got that error, reinstalled the drivers one by one and it worked. For further help (from those that i'm sure know better than me) go to the flashtool sticky thread.
wi fi information
because your rom has the last modules from fxp kernel perhaps the signal is no so good do the follow
go to setings wifi delete from memory the pass and create it again and now wi fi is turbo i get from bencmark quadrand 2340 score with settings sio intelidemand oc min346 oc max 1800
seeing how there's an overwhelming amount of governors and schedulers lol can anyone recommend a combination for bother performance and battery?
btw why is there only 341 MB of ram instead of the usual 360 MB..
h.debnath said:
seeing how there's an overwhelming amount of governors and schedulers lol can anyone recommend a combination for bother performance and battery?
btw why is there only 341 MB of ram instead of the usual 360 MB..
Click to expand...
Click to collapse
Less ram because of 720p recording, was going to remove it but though people would want it, fxp have re-added it to fxp137, I can i Ilsa remove it for next release of people don't want it.
As for governors for performance I recommend intellidemand, superbad, darkside or battery life smartass, smartassv2 or virtuous. And keep SIO as scheduler it default in all my kernels
Sent from my GT-I9300
Left it overnight, 3g on, sync on, bad ass/noop. Battery drained 11% over 10 hours, which is great compared to any cm9 previously.
Someone tried this on Arc S with the cm9 wi-fi problem (getting ip address loop)?
Inviato dal mio Xperia Arc con Tapatalk 2
Disable BT.
Remove the two files from /data/misc/dhcp.
Reboot.
You're done
mekayzer said:
Disable BT.
Remove the two files from /data/misc/dhcp.
Reboot.
You're done
Click to expand...
Click to collapse
I know, but for me never worked, but thank you for your answer.
Xperia Arc S with aokp jb
Then, fix you ip adress and don't use dhcp.
Thank's for the kernel Wedgess, but can you post one based on CM7.2
mekayzer said:
Thank's for the kernel Wedgess, but can you post one based on CM7.2
Click to expand...
Click to collapse
No problem, unfortunately I do not plan on making one for CM7, I've had this request for the play also. CM9 is stable so no need for cm7. I do not have time to maintain any more kernels cm 10 kernel will be out this week and that will take my. Kernels to 10, I simply don't have the time, and besides I'll get in Trouble with the missus.......sorry
Sent from my GT-I9300
Running for approximately 6 hours, great so far. Using Virtuous gov., sio scheduler, 249-1130. Smooth, stable and battery friendly.
However, didn't test Wi-Fi yet.
Sent from nowhere
Just waiting for FXP137 to finish downloading then going to use this. Thanks.
wi fi problems
cm9.1 cm10 roms use kernels from 431 firmware dont use people baseband 77 only 72 with that roms.....if kernel changed we need other baseband
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits to codeworkx for the base aosp kernel!
Features:
More shedulers
row I/O scheduler
sio I/O scheduler
vr I/O scheduler
More governors
cpufreq_smartass2
cpufreq_lagfree
cpufreq_pegasusq
cpufreq_lazy
cpufreq_lulzactive
cpufreq_minmax
cpufreq_abyssplug
cpufreq_wheatley
cpufreq_scary
cpufreq_HYPER
Updated to linux kernel 3.1.0 -rc1
Dualboot support
Brightness adjustments for darker screen settings (good in low light conditions)
Synced with latest codeworkx fixes
Undervolting support
USB fastcharge support
Cleaned up arm source
Compiled with hard float instead of soft float
Greenblob 1.1.72 LTS (Changelog):
Added added row I/O scheduler
Added added sio I/O scheduler
Added added vr I/O scheduler
Upgraded from 3.0.72 to 3.1 -rc1
500 commits FTW! Happy changelogging on git
Greenblob 1.1.1 LTS (Changelog):
Updated kernel from 3.0.36 to 3.0.72 (We´re now on latest linux 3.0.x releases)
Updated ~700 commits (20 Github pages lool). Those are from 3.0.36 to 3.0.72
Hopefully working now on latest cm nightly (working here on my chameleon os)
Go for changelog on github!
Greenblob 1.1 LTS (Changelog):
Fixed auto reboot in recovery
Fixed rebooting during backup in recovery
Fixed some governor stuff
Updated dualboot
Greenblob 1.0 LTS (Changelog):
Added governors
Added 'long-time-support'
DevPrev 6.3 (Changelog):
Added usb fastcharge
Added undervolting support
Default cpu speed at 300mhz
Synced latest changes from cm repo
DevPrev 6.0 (Changelog):
fixed cpu staying at 600mhz
added DualBoot support (Credits to chuandinh for the method. Its the same as Galaxy Note 2 uses)
All dualboot related questions please visit the dualboot thread!!
DevPrev 5.2 (Changelog):
restart after quitting coding kernel
adjusted gamma values for smartphone usage in dark light
wifi driver update
mhard float instead of msoft float
cpu frequency change based on screen on/off
touchkey timeout 2 seconds
cleaned up arm source
TWRP for now - I was just trying something, will revert to cwm soon
Important:
There are no other features than mentioned in the changelog. I restarted the kernel and I think I wont add OC etc. This kernel is not ready yet but damn stable and fast. No need to oc anything (my opinion).
For brightness (gamma) adjustment: You will notice a heavy brightness drop between lowest and lowest +1 step brightness. The one before the lowest was the lowest brightness that comes with normal cm kernel. I will make a better transition between the last two steps within the next update.
DevPrev 5 (Changelog):
Now compatible with cm10.1
Some bugfixes
New control app now on google play!
DevPrev 2 (Changelog):
Updated to latest codeworkx sources
Added undervolting support
Added usb fast charge mode support
Readded 1.2Ghz slot
Greenblob kernel control:
This is the official app to control all features of Greenblob kernel (for now available on Galaxy S2G, visit XDA for infos).
But most features can also be used on any other device! (Ok, not any but for a big number).
You can:
- Change status of tweaks
- Cpu OC
- GPU OC
- Change voltage
Installation:
As usual: Flash the flashable .zip in cwm. Only working on aosp jellybean roms!
Download:
Download here
FAQ:
How do i change voltage?
Use the latest version of setcpu, leantweaks, cputuner, or your ROM's built-in tools.
Do i need to wipe dalvik/cache?
In general there's no need, but it doesn't hurt so if you have time go ahead. Posted Image I don't wipe.
What's the variable on the GPU OC?
The kernels GPU is now set to stock 307Mhz by default. You can adjust that by using Variable GPU OC (see a separate FAQ entry below).
When you go from say 307 to 512Mhz, you will not experience near double performance increase. Due to the factors outside the GPU module (ie. memory bandwidth limitation), you can't truly OC the GPU. In fact, most people can't tell the difference between 307, 384 and 512. Nenamark2 will roughly give you the following scores: 307/25fps, 384/28fps, and 512/31fps.
Some of you have seen the note from Colin, the Google kernel engineer, not to OC the GPU because using the OV_UV voltage slot will drain the battery. Greenblob kernel uses the same voltage for both OV and OV_UV slots. So there's no danger of battery drain there.
My phone doesn't seem to be deep-sleeping, what gives?
(assuming you checked in the right place like cpuspy) In terms of deep-sleep, there's not a whole lot going on in the kernel. It works or it doesn't - and I can assure you that I test every release (well almost every release) for deep-sleep before I release.
19 out of 20 times it's either 1) some sort of background process that's preventing your phone from going into deepsleep, or 2) something's misconfigured in your ROM, or both. Also connecting to USB will prevent phone from going into deepsleep.
I'm having unusual battery drain - help!
First of all, our i9100g (AS every Smartphone ^^) has very poor battery life while in active use. It's downright horrible while screen is on - screen is definitely the main culprit and there's not a whole lot I can do about that.
Custom undervolting can help or can hurt. This is mainly due to SmartReflex (class1.5) which auto-calibrates the ideal voltages for you. In fact, with SR you don't really need to use the custom undervolting feature for frequencies other than the 2 lowest. It does a great job calibrating higher frequencies. I personally don't touch it.
The "notrim" versions are an exception because I had to disable SR1.5 for the trim override to work. There's no auto-calibration going on there. Feel free to mess with custom undervolting on the notrim versions.
Now, if you've already accepted the horrible battery life while screen is on, but have questions about battery drain while idle - read the next question.
I'm having unusual battery drain while screen is off, or phone is sleeping - help!
First, let's find out if you're phone is going into deep-sleep. Install CPUSpy, unplug phone, turn off screen, and leave the phone alone for 5-10min. Turn the screen back on, launch CPUSpy, and see if you see an active entry for Deep Sleep. If so congratulations - read on.
If you've determined that your phone is not entering deepsleep by using the above method, read my entry above that says "My phone doesn't seem to be deep-sleeping". I've heard that removing SDM.apk helps as well as rebooting the phone. Also try turning your bluetooth on and off, and launching camera app and closing it.
If you've determined that your phone is entering deepsleep fine but still feel like battery drains, read the next question.
I'm having unusual battery drain while phone is in deep-sleep - help!
First make sure you are absolutely positive that deep sleep is working (read the previous question).
While on my kernel *and* connected to Wifi, you shouldn't drain more than 2% battery per hour *average* while in deep sleep (based on 5-8 hour continuous deep sleep). With wifi turned-off, my guess is probably no more than 3-6% per hour, depending on signal strength.
tip 1: If above is not happening for you, first charge the phone all the way and reboot. Let things settle a bit - give it a day or so. If you're using Battery Monitor Widget (which is not accurate for gnex), things should eventually settle between -2mA and -60mA per sample.
tip 2: Install BetterBatteryStats and look at which wakelocks dominate. Google search for names of the wakelocks to see how you can fix them.
tip 3: http://checkthis.com/d87t
If nothing seems to help, you can try the "notrim" version, but stick to speeds between 350 and 1350 (don't use OC slots). The notrim version has SR1.5 disabled which could help for those of you with drain issues on my other kernels.
What is SmartReflex?
SmartReflex performs continuous dynamic voltage scaling around the nominal operating point voltage according to silicon characteristics and operating conditions.
My stable and experimental builds will have SR Class 1.5 enabled by default.
You can disable SR via sysfs
How do I use Variable GPU OC?
You can use Lean Tweaks by Jake, or use the built-in "oc" script. Both leantweaks and my oc script will create an init.d script so the setting sticks at boot. My "checkt" script will also show the current GPU max speed. Note that 512MHz will probably not work for everyone.
307Mhz (stock) is set default by the kernel.
Open Terminal, and type for stock speed of 307Mhz: oc gpu 0
for 384MHz: oc gpu 1
for 512Mhz: oc gpu 2
FAQ partly taken from leankernel! I changed the important parts for us! Thanks to them! http://forum.xda-developers.com/showthread.php?t=1790675
An app for variable gpu oc is already in progress! For now please read the FAQ
Great work fuss. It says gnex somewhere in op btw.
Sent from my GT-I9100G
Such a Fast Releas
iXanza said:
Great work fuss. It says gnex somewhere in op btw.
Sent from my GT-I9100G
Click to expand...
Click to collapse
Thanks ^^ I changed it
And I also changed the battery life expectation
Sent from my GT-I9100G using xda app-developers app
Thanks for sharing，that works great.
any chance to get this kernel for stock rom..?
Sent from my GT-I9100G
+100 for the awesome Kernel !
Sent from my GT-I9100G using Tapatalk 2
First of all, WELCOME BACK FUSS.. Back with bang I can say. New Kernel and it's more powerful, efficient and features. WOW. You Rock. Thank you fuss :beer:
Sent from my GT-I9100G using Tapatalk 2
Is it safe to install with latest cm10 nightly?
Sent from my GT-I9100G using Tapatalk 2
ottomatteseo said:
Is it safe to install with latest cm10 nightly?
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my GT-I9100G
iXanza said:
Yes
Sent from my GT-I9100G
Click to expand...
Click to collapse
Thnx
Sent from my GT-I9100G using Tapatalk 2
hi fuss, welcome back to XDA, i though you will disappear for long time :laugh::laughim joking)
and BIG THANK TO YOUR NEW WORKS Greenblob
may i flash it to codebox 1.9.0? any suggest to flash?(im still using codebox whatever it no longer support:good: because it is awesome)
IloveXDA512 said:
hi fuss, welcome back to XDA, i though you will disappear for long time :laugh::laughim joking)
and BIG THANK TO YOUR NEW WORKS Greenblob
may i flash it to codebox 1.9.0? any suggest to flash?(im still using codebox whatever it no longer support:good: because it is awesome)
Click to expand...
Click to collapse
Flash GreenBlob through CWM
Sent from my GT-I9100G using Tapatalk 2
My phone freezed in the instance i got to the menu. Now it boot loops when i has reached the lockscreen. What should i do now?
I've just installed it. I see in recovery version is now 6.0.1.9 is it still using blob crap for android? Thanks
Sent from my GT-I9100G using xda premium
kernel from the sky =) =) big big thanks fuss!!!!! =) =) what a speed!!!!! =P
cesco73 said:
kernel from the sky =) =) big big thanks fuss!!!!! =) =) what a speed!!!!! =P
Click to expand...
Click to collapse
Sorry thats FUSS not sky
Sent from my GT-I9100G using Tapatalk 2
im sorry to said that, but im still having the reverting back of the freqency....
any idea? ><??
Based on Samsung Official source
CivZ-P900 Kernel Download Folder.KERNEL FEATURES REV4.4 source
Install with custom recovery
KNOX removed (container service, SecureStorage)
SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
INIT.D Support
FRANDOM
ARCH Enabled
NEON @ Faux123
DYNAMIC FSYNC & [email protected] Faux123
POWERSUSPEND @ Faux123 & Yank555.lu
SPen BOOSTER CONTROL @ bonuzzz
INTERNAL & MEMORY VOLTAGE CONTROL @ Andreilux & halaszk
MEMORY Frequency up to 933MHz
OVERCLOCKING & VOLTAGE CONTROL CPU & GPU @ Andreilux & halaszk (CPU:200MHz up to 21000MHz / GPU: up to 677MHz)
BFQ SCHEDULER ADDED
ONDEMAND GOVERNOR TWEAK @ oloendithias
WOLFSON DAC SOUND CONTROL ( Speaker and Headphone equalizer) @ Andreilux & oloendithias
DIRTY WRITEBACK & DYNAMIC READ AHEAD
SAMSUNG DYNAMIC HOTPLUG CONTROL @ oloendithias
EXTRA TCP WIFI CONNECTION OPTIONS
SCREEN mDnie control @ Andreilux & Xluco
MEMCOPY & string @ Miao Xie
WORKQUEUE added = Power_efficient = Better battery stats.
NTFS READ WRITE SUPPORT (with paragon)
MODULES LOADABLE
SWAP/CLEANCACHE/FRONTSWAP
CIFS
COMPILED WITH GCC 4.7.4 Linaro
XZ COMPRESSED
GPU Qos control, added control in synapse @ UpInTheAir
UKSM = Ultra Kernel Samepage Merging, added control in synapse
FULL CONTROL WITH SYNAPSE APP (Thanks to Andreilux for the app and UpInTheAir for most of the layout)
Some screens of the Synapse:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
etc.........
Changelog KERNEL:
24/10/2014 Rev2.1 Released
26/10/2014 Release Rev2.3:
Optimized AES & SHA1 routines
F2FS
Google Snappy compression
Memcopy & string
Removed Intelli_Hotplug = causing shutdown when charging
Rework of the Samsung Dynamic Hotplug service
Sync tweaked
Workqueue added = Power_efficient = Better battery stats.
02/11/2014 Release Rev2.4:
GPU Overclock rework = 677MHz
Battery control removed = caused some charge problems = @ 100% auto shutdown
Samsung Hotplug service rework @ oloendithias
More control settings
GPU Min frequency is controlled by the hotplug service from now on.
GPU min freq is 100MHz when screen is OFF, when the screen is on it is 266MHz.
04/11/2014 Release Rev2.6:
ARM NEON Support @ Andreilux & Xluco
Screen mDnie control @ Andreilux & Xluco
CPUI Idle tweaks
Synapse options added.
13/11/2014 Release Rev2.9:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
F2FS & Battery control removed
Min Screen ON frequency is now set at 177MHz by the hotplug driver
CIFS supported fixed ( my bad , forgot some stuff in the ramdisk)
14/11/2014 Release Rev3.0:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
04/12/2014 Release Rev3.2:
Samsung Hotplug service tweaked and adjusted in Synapse
GPU governor tweaked
Removed useless drivers, swap, zwap, frontswap, cleancache, KSM , Joystick = All memory stuff like swap is not needed on a device with 3GB ram. This stuff is for devices with a low Ram. It only causes lagg caused by the needless swapping. = my opinion
09/02/2015 Release Rev3.3:
JoyStick support for the X-Box controller, (pc with usb connection) (Tested it with Skylander game)
OTG USB support activated in kernel
05/04/2015 Release Rev4.0:
Re based on Bonuzzz source + mine
Hotplugg control updated (synapse)
KSM added + control (synapse)
GPU control rework + control (synapse)
Gentle sleeper + control (synapse)
zswap + control (synapse)
LMK Whitelist + control (synapse)
Thermal control added (synapse)
Battery control added (synapse)
WIFI power control added (synapse)
Log control added (synapse)
18/04/2015 Release Rev4.1:
changed some compiling flags and settings = tip from bonuzzz.
05/05/2015 Release Rev4.2:
changed some compiling flags and settings = solved some random reboot problems.
25/05/2015 Release Rev4.4:
GPU Qos control, added control in synapse @ UpInTheAir
UKSM = Ultra Kernel Samepage Merging, added control in synapse
Some changes in the GPU OC code.
XDA:DevDB Information
CivZ-P900-KitKat-Kernel, Kernel for the Samsung Galaxy Note Pro 12.2
Contributors
civato
Kernel Special Features:
Version Information
Status: Stable
Created 2014-11-04
Last Updated 2015-05-25
Color control... nice addition!
dodo99x said:
Color control... nice addition!
Click to expand...
Click to collapse
Nice work, but androidfilehost dont work
Works fine for me
Can the op be updated to say what roms this will / won't work with? Will it work on CM11 or is it only for TW roms? Thanks!
jimbob_sf said:
Can the op be updated to say what roms this will / won't work with? Will it work on CM11 or is it only for TW roms? Thanks!
Click to expand...
Click to collapse
It's for TouchWiz only
Hi @civato . Can i flash this kernel on SM-p901 ?? it's the same as SM-P900 and both of them are exynos and the only difference is that SM-P901 has sim card slot and 3G capability ! would you please compare the kernel sources of sm-p900 and sm-p901 and if they are the same , i flash it on my SM-p901 ?? Thanks.
francesco totti said:
Hi @civato . Can i flash this kernel on SM-p901 ?? it's the same as SM-P900 and both of them are exynos and the only difference is that SM-P901 has sim card slot and 3G capability ! would you please compare the kernel sources of sm-p900 and sm-p901 and if they are the same , i flash it on my SM-p901 ?? Thanks.
Click to expand...
Click to collapse
You can always flash it, no harm will be done. However, it might be that some settings of the 3G capability is integrated in the kernel, and you will loose this. There is no verification in the kernel if you flash it on the right device. If there are any issues, just restore your stock rom.
13/11/2014 Release Rev2.9:
13/11/2014 Release Rev2.9:
ARM NEON Activated now
Samsung Hotplug service tweaked and adjusted in Synapse
F2FS & Battery control removed
Min Screen ON frequency is now set at 177MHz by the hotplug driver
CIFS supported fixed ( my bad , forgot some stuff in the ramdisk)
Tip:
Use the Screen option in synapse and enable register hook & the edge enhancement and see a real sharp image.
I just flashed this latest kernel and running great, I have a question about enable register hook and edge enhancement I did this and everything looks dull / washed out is there any other settings under the screen options I need to change?
Awesome work!
Thanks for the kernel! awesome
By the way with the lastest kernel i have still experimenting some lags. Is there a way to disable the synapse tool?
This happend me constantly so ist's a bit uncorfortable when i am writing and the tablet freezec for a moment (3 seconds)
thanks in advance
Keep getting signature errors, and cannot install
Hi, I tried to install this kernel, but keep getting signature errors, and it reverts back to restore.
I wiped cache, and all, and seem to be stuck. Is there any way to make a tar file for odin? I don't have Linux , and changing the extension only corrupts it.
I would like to change the stock kernel on my smp900, as the knox counter tripped with kies, and Samsung voided my warranty for (new tablet :crying: - even sent it in and they didn't reset it, after the had admitted it was a problem)
If you can't make it a tar file for odin, what is best to use to install this?
Thanks
19/11/2014 Release Rev3.0:
19/11/2014 Release Rev3.0:
Samsung Hotplug service tweaked and adjusted in Synapse
Can you make this kernel specifically for SM-T900? (TabPro12.2 WiFi)
I've flashed this kernel in my T900 because they're almost the same except for the Pen software and feature and every thing worked smooth and excellent but "rotation" breaks down, it doesn't work even on apps so no tilt function. Hope to hear an answer Thanks. It runs so smooth that I want some of the butter for my Behemoth Tablet lol
this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day
saruba said:
Can you make this kernel specifically for SM-T900? (TabPro12.2 WiFi)
I've flashed this kernel in my T900 because they're almost the same except for the Pen software and feature and every thing worked smooth and excellent but "rotation" breaks down, it doesn't work even on apps so no tilt function. Hope to hear an answer Thanks. It runs so smooth that I want some of the butter for my Behemoth Tablet lol
Click to expand...
Click to collapse
SM-T900 uses different hardware for screen rotation, can't make it work with this kernel.
Sterist said:
this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day
Click to expand...
Click to collapse
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?
Sterist said:
this should not be labelled as stable. it's the one and only kernel I've used that crashes n sometimes it will reboot while sometimes it needs to be done manually
about 3 to 5x a day on 8 to 10 hours of use a day
Click to expand...
Click to collapse
I have to agree with the previous poster - your experience is not typical. I have installed this kernel every time a new one is released and it gets more and more stable with every release.
You need to look at the tweaks you have made and what apps you have installed.
Asking for help and hints would be far more productive than a hit and run.
civato said:
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?
Click to expand...
Click to collapse
Have you considered building this kernel for the P905. Not sure if it is possible without having the specific device on-hand. Regardless, sounds like you have been able to improve performance for the P900 - congratulations on your work. Hope you have Happy Thanksgiving if you participate in turkey day activities.
civato said:
Not having it , your problem not mine. Running 24/7 stable. At 2.1GHz and 677MHz gpu.
so before *****|ng you should probably learn how to logcat and see what is causing your problem.
so this should be labeled as stable, you on the other hand?
Click to expand...
Click to collapse
Works great for me as well. No issues here, over clocked and undervolted.
This is a Kernel, based on Lord Boeffla's Kernel, "boeffla-kernel-4.1-CM14.1-g900f", which is based on LineageOS Kernel, which is based on AOSP (google) Kernel, which is based on Linux Kernel.
It should be installed via Recovery (TWRP or CWM) over any other LOS 14/15 ROM/kernel, just like boeffla kernel. It doesn't need any tweaking with any app. Install it and use it.
BUT you can use "boeffla config app" if you like tweaking. You will receive a Warning about "mpdecision", just ignore it.
It has:
- a different "low memory killer" algorithm
- zcache is disabled for really freeing memory that was used for caching files (when needed) instead of compressing it
- a different default cpu hotplugger. Every other kernel (even LOS/stock) relies on Qualcomm's MPDecision, I wrote my own, *****es
- Tuned governor (it's the default). It's basically the Interactive but with a lot of tuning.
- many compiler optimizations not found on boeffla or LOS
- many unused code simply REMOVED to free memory and CPU. People just add more stuff, I like to remove
- TV tuners removed from code. wtf...
- many unstable governors and i/o schedulers removed
Note that even though 2GB of RAM isn't too little, if you have too many memory-hungry apps, performance will always suffer; Most apps are started(loaded up to RAM) right after booting; There are ways to prevent this auto-start but I can't remember now..
Overall your phone will be snappier, and less battery hungry
XDA:DevDB Information
tuned, Kernel for the Samsung Galaxy S5
Contributors
fbs, lord boeffla, haggertk
Source Code: https://github.com/bemerguy/tuned-kernel-LOS-s5
Kernel Special Features: lighter, optimization-focused
Version Information
Status: Stable
Stable Release Date: 2018-08-22
Created 2017-10-08
Last Updated 2018-11-01
DOWNLOADS:
KTMonitor = an app that will show your cpus clocks in real time, in a overlay window. simple, fast, no ads.
If you only see the first cpu (CPU0), you'll have to change kernel selinux mode to Permissive instead of Strict. Boeffla config app can do it.
"tuned kernel" builds will show up here, from older to newer
klte - SM-G900F, SM-G900M, SM-G900R4, SM-G900R7, SM-G900T, SM-G900V, SM-G900W8, SM-S902L
klteduos - SM-G900FD, SM-G900MD
kltedv - SM-G900I, SM-G900P
kltekor - SM-G900K, SM-G900L, SM-G900S
los14 = cm14 = android 7
los15 = cm15 = android 8
Reserved
220818:
-hstcp as tcp congestion control
090818:
-and zram disabled again
-compiled with the leanest toolchain type
-undervolt back on, I guess
-lowmemorykiller from xiaomi's stock kernel
-read ahead disabled completely
-more unused kernel parts removed
-more compiler optimization
280618:
-zram enabled again, now with lz4 that should have been used since forever but wasn't
-some kernel fixes from around the net. should be even faster
"tuned" governor tweaked a bit, and it's profiles too (for those who still uses boeffla app to tweak things)
210618:
-LOS 15.x build
-268mhz as default min speed and 2.6ghz as default max speed
-can't figure out why swap is being used A LOT even with swappiness=5, making battery life miserable, so zram disabled again
-"tuned" governor as default. It's a "interactive" with bugs fixed and tweaked
-"zen" scheduler as default, with some bugs fixed. it's fast, simple, almost like noop+deadline+row mixed
230418:
-latest boeffla-based
-wifi tweaked
-zram (swap) is back
-other compiler flags not enabled before
280218:
-beta22 based
-lmk faster than before while screen is on. slower than before when screen is off
-interactuned governor will save some cpu while screen is off
160218:
-now compiling with linaro 8.0
-"interactive" governor renamed to "interactuned" to get rid of conflicting values
-"interactuned" profiles updated on boeffla app (standard, performance, battery, battery extreme)
-tuned hotplugger tweaked a bit
110218:
-lmk will search, compare apps' scores, and kill them in groups. the stock lmk and the "less aggressive" lmk from build 020218 were killing one app at a time
-put tuned hotplugger to run more often when display is on. the cpu cost is minimal as it is extremely simple
-tweaked compiler flags again to not make code large
020218:
-boeffla's beta21 based
-less aggressive lmk again
-tweaked compiler flags
-tweaked interactive governor
-tweaked tuned hotplugger
301217:
-more aggressive lmk
-less aggressive tuned hotplugger
-tweaked the default interactive values in ramdisk (via anykernel), as they are modified by it on boot
-tweaked also the boeffla app interactive profiles
-performance governor will really drain your battery now, but it will be even faster (max cpu clock, all cpus on if using tuned hotplugger)
-compiling with O2 but with some O3 flags. it seems to be faster than 211217
211217:
-beta20 from boeffla
201217:
-tweaked some filesystem stuff
-it seems tuned hotplug was being ramdonly disabled, fixed
-changed how tuned hotplug enables/disables cpus:
it was based on the number of processes needing cpu. But the system itself didn't count as "processes", so I changed it to look at the cores frequencies instead. The cpu governors itself has a lot of code just to measure how busy the cpus are before raising or lowering frequencies, I think it's faster/lighter to just use that info instead of calculating again or in another way.. In practice: cpu0 at max frequency will turn on cpu1 and so on. Any cpu on lowest frequency for some time will turn it off. I don't really know if this will be better or worse than the code before(151217)
151217:
-beta19 from boeffla
071217:
-beta18 from boeffla kernel
-zram/swap fully disabled. The slowdowns are unacceptable. It seems we will always get a huge performance/battery hit with any kind of swap. For now I think it's better to let the "low memory killer" do its thing than swapping. Remember: Killing an app will instantly free RAM with zero CPU usage. Swapping means a lot of CPU usage, and (as swapping occurs in RAM), only 40-50% of ram will be freed.
011217:
-beta17 from boeffla kernel
-tweaked tuned hotplugger a bit. changing from mpdecision to tuned on config won't bug the lower frequency
-swapping should be faster
271117:
-hotplugers "mpdecision" and "optimized mpd" working again. zzmoove hotplugers removed (the governor itself was removed long ago)
"interactive" profiles changed a bit: "performance" will have more performance, and "battery" will really save more battery
-zram compression (swap) may be even faster now
-compiler toolchain updated to gcc-linaro-7.2.1-2017.11
-processor scheduler using logarithmic scaling
-"tuned" hotplugger logic was changed a bit. it will turn on/off cpus based only on average load, but will obey the "order" and may turn all on if the load is suddenly high. it may also use less cpu to compute
-"interactive" governor may also use less cpu
So it's safe to say that this kernel could just be flashed over beta12 , i would like to test it and see the difference at work .
Also , Thank you for the work you put into this.
I have found that using kernel auditor to turn off ALMK off in my variant of boeffla kernel has helped tremendously with ram management. I'm curious if what you have done here will work even better. Keep up the good work.
Sent from my kltespr using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KazuDante said:
So it's safe to say that this kernel could just be flashed over beta12 , i would like to test it and see the difference at work .
Also , Thank you for the work you put into this.
Click to expand...
Click to collapse
yes
The~Skater~187 said:
I have found that using kernel auditor to turn off ALMK off in my variant of boeffla kernel has helped tremendously with ram management. I'm curious if what you have done here will work even better. Keep up the good work.
Click to expand...
Click to collapse
Thanks. I think it would. This "ALMK" is a new feature that only made more obvious what was already broken. I was already trying to get rid or modify LMK when it was integrated to our LOS kernel.
You could, *at least*, drain less battery by installing this mod. If you have time, please compare before and after.. I think it does use less cpu and the phone won't "gag" when it needs more memory (like when opening a new app)
64MB for empty applications? That is TOO low. The default is 180MB. This way, lmk would/should only kill anything when all the system has only ~64MB to cache files.
The memory lmk really counts is not the real "free" ram, it's the "cached" ram. Our "free" ram is almost always ~44MB..
the Linux kernel will use available memory for disk caching, unless it's required by a running program.
This is considered good; say you have 4 GB RAM, and your programs are using only 1 GB. The other 3 GB are going to waste. Despite the "feel-good" impression from knowing you're only using 25% of your memory, the counterpart is that the other 75% is going unused. So the kernel uses that for caching files which significantly improves performance. It's automatic; unlike older operating systems you don't need to decide how much to devote to disk cache, or manually configure it.
"The Linux disk cache is very unobtrusive. It uses spare memory to greatly increase disk access speeds, and without taking any memory away from applications. A fully used store of ram on Linux is efficient hardware use, not a warning sign."
Click to expand...
Click to collapse
fbs said:
Thanks. I think it would. This "ALMK" is a new feature that only made more obvious what was already broken. I was already trying to get rid or modify LMK when it was integrated to our LOS kernel.
You could, *at least*, drain less battery by installing this mod. If you have time, please compare before and after.. I think it does use less cpu and the phone won't "gag" when it needs more memory (like when opening a new app)
Click to expand...
Click to collapse
From what I'm seeing this is working great. Free Ram seems to be holding steady between 700 and 800 MB.
Would you mind if I implement this into a test version of my kernel? I would like to see if it has any ill effects with the added features I have in mine.
Sent from my kltespr using Tapatalk
The~Skater~187 said:
From what I'm seeing this is working great. Free Ram seems to be holding steady between 700 and 800 MB.
Would you mind if I implement this into a test version of my kernel? I would like to see if it has any ill effects with the added features I have in mine.
Sent from my kltespr using Tapatalk
Click to expand...
Click to collapse
Of course! Let's try to make things better for our S5... !!!
fbs said:
Of course! Let's try to make things better for our S5... !!!
Click to expand...
Click to collapse
Awesome. I added you modified lmk.c to my source, compiling now. I will keep you posted on my findings. Thank you again!
Sent from my kltespr using Tapatalk
im loving where this is going so far.....heck if even in the future this could also be loaded on the 8.0 then our s5 still have a long way to go life wise.
awsome colab guys.:highfive:
and on top of that the official xposed is now out for Nougat , this is a good day.
The~Skater~187 said:
I have found that using kernel auditor to turn off ALMK off in my variant of boeffla kernel has helped tremendously with ram management.
Click to expand...
Click to collapse
VERY interesting! For me deactivating ALMK in Kernel Adiutor didn't help so far. But I didn't test this brand new kernel yet - just the older version based on boeffla kernel beta11. This new thread is one the most helpful of the last 3 month! Thank you so much, @fbs!
VERY good news! I have subjected your current kernel to a heavy stress test. Made a Nandroid backup triggered by SManager in the background. Half of the time (about 12 minutes) I chatted on WhatsApp and was surfing with Chrome while the backup was running in the background. This *never* had been working before without any issues. Afterwards I synchronized the 5 GB backup with my NAS via FolderSync in the background. This also worked perfect! In addition, there were no slowdowns or lags at work. Everything ran (and runs) absolutely fluently. At the first glance I'd say it's the far best kernel I ever used on my S5!
I've added another version, with ZCACHE disabled. It may speed up things when accessing files and may solve some bugs. (whispering: I think it was badly implemented, no one uses it anymore..). If anyone is interested in comparing the performance of both versions, including battery usage.. feel free to post!!
fbs said:
I've added another version, with ZCACHE disabled. It may speed up things when accessing files and may solve some bugs.
Click to expand...
Click to collapse
I will gladly give it a try. But I am truly more than satisfied with the current version! It runs smoothly and reliably. I couldn't detect any bugs. The most important thing is that we also get a beta13 and beta14 and so on...
The no zcache version seems pretty damn smooth so far. I haven't really stressed tested yet, but I'm not getting lockups and lag spikes as I was with normal one.
Please keep up the good work.
Battery life is outstanding but I did just drop a brand new battery from Anker this weekend. So. . . .
Sent from my SM-G900T using Tapatalk
PorchSong said:
The no zcache version seems pretty damn smooth so far.
Click to expand...
Click to collapse
I believe the whole thing is also strongly related to the swappiness-value. My swappiness is set to 30 and I can't see any advantages or disadvantages, whether zcache is switched on or off.
Can i using for RR rom ?
wayan_billie said:
Can i using for RR rom ?
Click to expand...
Click to collapse
Yes you can.