Database Develop

Installed and Uninstalled "WeFI" and now my WiFi won't auto connect.

Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar

Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].

WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!

I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.

We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-

Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!

Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim

Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!

Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks

AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!

[Q] n00b question- rooting & OTA updates, 'unable to scan networks'

HI there, I have the dreaded 'unable to scan networks' wifi problem- it started after I set up a mobile AP (I didn't turn the AP service off after I'd finished with it- I wonder if that's what caused it?)...
Anyway, I've since learned via this board that I can fix my wifi by 2 methods: 1) performing a reset (would rather not) and 2) editing a line somewhere, root access is required.
I do have a third option- waiting until the 2.2 OTA update comes through, which I understand will require (and perform) a reset anyway.
However, I'm sick of waiting for 2.2.
What I'd like to know is: If I root my phone & fix my Wifi, will I still receive the OTA update?
Anybody?
TIA.

the 2.2 froyo is not OTA
it is OTK (over the kies)
just turn off your phone, then turn it back on, that should reset your WiFi stuck i/o
some times the GPS does that too, just turn off the phone, turn it back on and they work right away.
in contrast to the HTC Windows Mobile phones, the SGS is much much much better, i barely have to do any restart of the phone with Android
with Windows Mobile it was at least 10 reboot a day

Restart doesn't fix it... Tried removing battery, etc. etc.
The 'unable to scan networks' problem is a known issue- at least to this board, If not to samsung.
Sent from my GT-I9000 using XDA App

Im in the same boat as you mate with my Samsung galaxy s, i have tried turning it on and off with alternate battery in and out methods, my wi-fi just wont work now, it turns on, comes up saying "Unable to scan networks" and turns the wifi off.
I have read on many posts about the issue and the best fix appears to be here:
hxxp://forum.xda-developers.com/showthread.php?p=8062313
*Sorry its not linked, this is my first post so i assume it wont let me post links until im roughly around the 25th post mark.
The issue i find with using this method is that in order to browse the phone at a root level to get to that file, you need to pay for the App in the android market to do it.
I have rooted my phone already and already applied the lag fix (boy did that change things), but im more contemplating doing the upgrade to 2.2 than buying the app just to fix a wifi issue. Im hoping this gets fixed in 2.2, or at least a more easier solution / fix.
My question is, if i did buy the app to browse the phones file system and i fix the wifi, does it fix it permanently or just until it happens again and i will have to follow the same process again... ?

did you both turn off Bluetooth when using WiFi?
you can't use BT when using WiFi

I've never had to turn off bluetooth to use wifi before...
However: PROBLEM IS NOW FIXED!!
Here's how I did it:
First, bluetooth was off.
Tried to upload a video shot on the phone to youtube. Got message along the lines of 'will only upload video over wifi'
Next message pops up: 'waiting for wifi'
THEN message box saying' signal strength excellent' & asking for my wifi password!
I've been without wifi for 2 weeks, this is brilliant. Give it a go, try uploading a video to youtube.
I reckon it overwrites the bad line, but who knows. Maybe its a bluetooth thing. I don't care, it worked for me.
Spread the news!
Sent from my GT-I9000 using XDA App- over wifi!

how would I go about updating, when 2.2 is official, without kies or rooting? I've lost patience with kies!

This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies

AllGamer said:
This was mentioned on another topic already but here it is again:
Heimdall, Odin, Rom Manager Clockwork just to name a few, there are many other ways to go about this even without Kies
Click to expand...
Click to collapse
cool, cheers! I think I will try Odin!

Netflix and (Original) Droid w only WIFI - error?

Hi,
I just got an old (original) Motorola Droid from my son. It was was taken out of service, so it's got no phone service, just WIFI. He flashed it to 2.2 before he gave it to me.
Almost everything seems to work ok on it: I can connect to my WIFI network, browse, etc. Market works, Flash works after I installed from Market.
I installed Netflix from the Market, and it starts up ok, but then I get a popup error that says:
"Please make sure that your device has network connectivity and the Date and Time settings are accurate."
and it kind of just hangs the Netflix app at that point.
Does anyone know what the problem might be, and how to get Netflix working in this case?
I'm guessing that it might be looking for a phone network connection or something?
Thanks,
Jim

Hi,
My son has a friend with a same (original) Droid, with the same firmware, but his phone is still active on Verizon, and he's able to get Netflix app to work on it.
He (my son) said that he thinks that he has another friend that also has a Droid that's deactivated, and he's going to ask him to try to see if Netflix will work on that.
If that latter doesn't work and get that same error message, I'm guessing that it's, as I mentioned above, trying to connect to Netflix via the 3G, rather than over the WIFI.
Anyone know if it's possible to get the Netflix app to use only WIFI?
I had a similar problem with Sipdroid this weekend when I tried to get that to work. It actually, at one point, connected me to a Verizon operator, presumably over the Verizon wireless network. Sipdroid has a configuration setting that allows you to tell it to use only WIFI, and once I set that, Sipdroid worked ok over WIFI. I think that I need to find some kind of setting in the Netflix app to do something similar.
Jim

Hi,
I just got off the phone with Netflix support. I don't know if the person that I spoke to actually knew what he was saying, but he said that the Droid is not "on their list of supported phones", so according to him, it would then try to "connect to their website".
I didn't think that I needed the build.prop changes, because I'm not getting an "unsupported device" message, plus, like I said, my son's friend has it working on his identical (except it's still on Verizon) phone, but I'm going to try some of those build.prop hacks, to see if that makes a difference.
Jim

Hi,
For the record, no joy with changing the build.prop. That seems to be ineffective.
So, I'm still stuck on this...
Anyone?
Thanks,
Jim

Hi,
I had left the phone on the Netflix error screen and it went to sleep last night, and when I woke up this a.m., and woke it, there was a different msg saying that it couldn't access some web site.
So, I started thinking that it was a firewall problem, and I put the phone's IP address in my router's DMZ, and VOILA!!
Got Netflix !!
Jim

[Q] LGR going offline after "OK Google" command

Hello all!
I must say, this watch is a very nice toy to play with and very handy in meetings! I have used the watch for a few days now, but I (only) have 2 issues to be solved which I cannot seem to find the answer yet:
1. The watch is connected to my phone OK (all notifications come through all the time). However, when I say "OK google" and then for instance "show me my steps" or "show me the weather", it will go to a screen saying me the connection is offline (white logo on blue background on the top of the screen). When I dismiss that message, I see that my connection is still OK! Weird .... this happens to me practically 80-90% of the times .... on a very rare occasion it succeeds to show me the info I want. By the way, my internet connection is OK at that time.
2. I have my phone also connected with BT to my Volvo V40 (2013). However, with the watch also on BT, the carkit of my Volvo is now almost useless as the voice is completely messed up (from the caller to me, and from me to the caller), sounds very intermittend or something. It seems like the BT connection is not happy with having 2 devices to be connected at the same time. My phone is an iNew V3 ... could it be something with BT profiles or versions?
I have already tried to reset the watch, re-install wear on my phone, deleted the dalvik cache (phone), un-installed apps, but no luck. Anybody have a clue on the above?

Maybe your Wifi/3G connexion is in sleeping mode and is too long to unsleep ? the watch can not connect so quickly ?

You sound like having BT reception issues on the phone. This behaviour might be triggered by the bluetooth interface itself (on the phone - bad design) or by bad drivers (also on the phone) or by interferences from the wifi module. Is your wifi on all the time?
Regular wifi is on 2.4GHz, the same frequency as BT. Wifi, however, uses more Rx/Tx power compared to BT so, under certain bad antenna designs, WiFi can just mess-up BT.
On my phone (Z1C) is the other way around: having BT ON will cause bad performance on 2.4GHz WiFi .... so I just stopped using the 2.4 band for WiFi.
Give it a try, Worst case scenario: use another phone.

Hi guys,
Thanks for the reply. About the first idea ... well if I have my phone on the charger and already switched on, it still happens. So there I assume the 3G / wifi connection is already on and this issue will not be due to the delay of switching the data connection on. Am I right?
Second option: my wifi is switched on all the time, you are right. I will try to experiment a little bit with it, let's see if that will make a difference. And, changing the phone ... hmmm well that would be a very high impact of course. My iNew V3 actually works very well ...
I am still a bit struggling with accepting it is my phone causing this issue ... only with the voice regocognition I have this issue ... with all other commands and apps the connection is OK! Only with the "OK google" option it says "offline" ... and immediately (I do not see the colored circle). To me it looks more like a but in the software or something, but after 3 resets of the device I also cannot believe that ...
Any more options? Thanks!

Troxelke said:
Hi guys,
Thanks for the reply. About the first idea ... well if I have my phone on the charger and already switched on, it still happens. So there I assume the 3G / wifi connection is already on and this issue will not be due to the delay of switching the data connection on. Am I right?
Second option: my wifi is switched on all the time, you are right. I will try to experiment a little bit with it, let's see if that will make a difference. And, changing the phone ... hmmm well that would be a very high impact of course. My iNew V3 actually works very well ...
I am still a bit struggling with accepting it is my phone causing this issue ... only with the voice regocognition I have this issue ... with all other commands and apps the connection is OK! Only with the "OK google" option it says "offline" ... and immediately (I do not see the colored circle). To me it looks more like a but in the software or something, but after 3 resets of the device I also cannot believe that ...
Any more options? Thanks!
Click to expand...
Click to collapse
Update: i tried several things with the WIFI / BT settings and on/off, but no luck. I have forwarded the above issues to Google, maybe they can help me out. I will keep you informed ... in the meantime anybody else some useful tips? Thanks!!!

Troxelke said:
Hello all!
I must say, this watch is a very nice toy to play with and very handy in meetings! I have used the watch for a few days now, but I (only) have 2 issues to be solved which I cannot seem to find the answer yet:
1. The watch is connected to my phone OK (all notifications come through all the time). However, when I say "OK google" and then for instance "show me my steps" or "show me the weather", it will go to a screen saying me the connection is offline (white logo on blue background on the top of the screen). When I dismiss that message, I see that my connection is still OK! Weird .... this happens to me practically 80-90% of the times .... on a very rare occasion it succeeds to show me the info I want. By the way, my internet connection is OK at that time.
2. I have my phone also connected with BT to my Volvo V40 (2013). However, with the watch also on BT, the carkit of my Volvo is now almost useless as the voice is completely messed up (from the caller to me, and from me to the caller), sounds very intermittend or something. It seems like the BT connection is not happy with having 2 devices to be connected at the same time. My phone is an iNew V3 ... could it be something with BT profiles or versions?
I have already tried to reset the watch, re-install wear on my phone, deleted the dalvik cache (phone), un-installed apps, but no luck. Anybody have a clue on the above?
Click to expand...
Click to collapse
which phone are you using? are you on custom rom or kernel?

doki81 said:
which phone are you using? are you on custom rom or kernel?
Click to expand...
Click to collapse
I am using a iNew V3 on KitKat with the 1.13 official version (however from needrom). Would that be the issue?

Troxelke said:
I am using a iNew V3 on KitKat with the 1.13 official version (however from needrom). Would that be the issue?
Click to expand...
Click to collapse
try to pair your watch with your friend phone and to check this is not a problem coming from your phone. sometimes certain kernel do have issue with some of the bluetooth device.

Hello everyone. Sorry for my English, because I am using a translator. I decided to write this post, because it happened to me the same trouble and I found her cause. In anticipation of its Nexus 6, I decided to temporarily buy fairly cheap option LG G60 (X135). When watch came to me, I noticed the same problem. I then tried to connect them to the Moto G (1st generation), and there is the same. but by chance, in the evening, in my hands was LG G90 and I connected watch to this phone. Everything works without any problem. it turns out that despite the declared characteristics (Bluetooth 4.0) in all devices, it works quite differently everywhere. I hope with Nexus no problems.

Hi all, after opening this thread I tried several things and have some new insights:
- new update (5.0.1) solved my issue with going "offline" after a voice command. Now it works perfectly! But only if I am not connected to my carkit.
- if my watch is connected and try to use the carkit the sound is still bad. So I would like to have my watch disconnected if my carkit connects:
-- this could be done by only allowing 1 device to pair with my phone and prioritize carkit to be first and watch to be second.
-- this could be done by actively unpairing the watch if I receive a call (and connect when call is over).
The first option would be the most reliable and most simple. I tried to find an app that restricts only having 1 pairing and having a prioritize option ... but I cannot find such app. People any options?
Thanks!

Hi guys, in response of the above, the app TRIGGER might do the job, but it seems closing the Android Wear app or disconnect via Bluetooth does NOT disconnect your watch! Has anybody succeeded in using TRIGGER to disconnect / connect the watch with a automatic job?

Help with companion apps

So I got a new toy. A Samsung Gear Live. I've had it for a week and so far really like it. The biggest issue I seem to be having is the companion apps. I don't know why, but they refuse to work. Everytime I try to use one I get an error message to the tune of, " not connected to a device with this application" or "lost connection to phone". This is clearly untrue. I can see that I'm still connected and even the device itself acknowledges it. I just can't figure it out.
I have attempted a power cycle, using the restart function, a hard reboot, even reseting it back to factory. I rebooted my phone, Uninstalled and reinstalled the apps on the phone, and still no luck. I'm at a loss. Anyone who knows what to do on this front would be very welcome.

What are companion apps?
Sent from my SM-N910T3 using XDA-Developers mobile app

Companion apps, are the apps that are activated on your smart watch. Like the dominoes easy order app, or a bank app that let's you check your balances without pulling out your phone.
I did find my problem however. It seems that my gear live was shipped with a dev kit. I had to completely reflash it to stock software to get it to run correctly.

How did you figure out it was a dev kit? Im having similar problems. Thanks.

Fixed the problem resetting the watch and reinstalling the Android wear app. However now in the storange manager its showing three of several apps. How to fix please?

You can find if it has a Dev kit under the settings. Under build I believe. It should be a set of numbers with "dev" somewhere in it. If that's there, it's gonna hold up your regular use of the watch. It caused the apps not to work right or not to show up, etc. I'll see if I can find the link I used before for how I reset the watch to stock firmware.