Related
Need some help trying to figure out how to make my Captivate turn on...I press power and get the AT&T slash screen and then the galaxy s logo loads for about 3 minutes and goes to blank dark screen with the capacitive buttons lit. this is not good because my **** won't boot into recovery either
You should flash to stock then...pull battery, hold volume buttons and plug in usb with odin loaded and ready on the computer. There's plenty of threads to help you out
Sent from my phone so excuse the spelling errors
Funnily enough... My phone just did that too. I was installing Mort Widget and it just totally bricked...
I'm rather p!ssed at this...
Course this was after it deleted all my email accounts and SMS.
What you'll need.
Odin (search or look in any of the ROM/Firmware threads, for example the i9000 ROM or unofficial JH2 or JH3 ROM)
Your USB cable.
The firmware files.
Steps:
Remove battery, SIM card and micro SD card.
Open Odin on the computer.
Put the battery back in.
Plug in the USB cable to the phone.
Hold both volume up and down.
With VOL up/down held in, plug usb cable to the computer.
Your phone will show the beloved DOWNLOADING yellow image.
Odin:
Simply select the rom/firmware you want to flash to and enjoy.
I can confirm this will not overwrite the phone's internal 16gb storage, which is where most apps save backups to.
Future steps:
Before trying anything crazy, copy the entire phone internal 16gb storage to your computer. If you brick, you can always get a new captivate, copy the junk back and run a restore.
I recommend Titanium backup (donate the $6, the backup/restore is SUPER SUPER fast) along with Clockwork recovery. Clockwork's Nandroid makes full kernel backups and you can boot to recovery from the phone itself. No more adb reboot download or adb reboot recovery.
sorry for my english i have a 19000m the one from bell my phone boot with the GALAXY S LOGO WITH THE MUSIC BUT AFTER THAT BLACK SCREEN CAN I REPAIR THAT ?
Yes, odin is about your only hope here... Even if you boot into the bios and try to do a factory reset it will come up with error after error...
Reflashing will totally wipe and start fresh.
I am curious however. I think i isolated where my problem came from but I am still curious...
Did you try to sideload anything?
It happened to me twice with Bell's Vibrant version. The first time, just after one week after getting it (not rooted). They simply gave me a brand new one.
The second one took 3 week to go dead. Knowing my way around Linux Embedded systems, this time I investigated the issue. In recovery mode, there were error messages saying that the system could not fine the internal flash memory partitions. I could confirm from the kernel messages that partitions on internal sdcard had disappeared. I did factory reset, reflash original stock firmware with Odin, but it did nothing.
I Sent the phone back for repair and three weeks later, they gave me another one (probably refurbished!!).
My phone just turns on, with a black screen and the capacitive buttons lit up. Nothing else happens. When I try to go into download mode, it only goes back to this black screen. I does however detect that the phone is connected driver wise on the computer, but does not show up in Hemidall or Odin. I've tried just about everything
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
isa.ahmed said:
i used ODIN to resotore the phont to stock
but when it finsh...i get black screen
and the phone dose not work or do anything.
any help plzzz
Click to expand...
Click to collapse
Does it light up or display anything and then go black, or does it just do nothing? If it does nothing, you're probably bricked, but try this anyway just in case your phone still has some life in it:
open Odin; press and hold both volume buttons and plug in your USB. If Odin lights up yellow, flash.
If that doesn't work, buy or build a jig, use it, and see if it goes into download mode. If it doesn't, plug the cable in anyway and see if Odin recognizes it. If it does, flash.
If that doesn't work, you're probably bricked. JTAG or Unbrickable Mod are your options from here, neither of which I personally know anything about but you can search around and find someone who can help you.
Hard Bricked= No signs of life, black screen no matter what, no response to USB plug in. Nothing but Unbrickable mod or JTAG will fix, I WOULD SUGGEST getting Unbrickable because you only have to get it once, and it cost the same as JTAG.
Soft Bricked= DL mode access is available(by jig or button combo and usb), recovery too, has some life in it. Can use ODIN/HEIMDALL to fix it.
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
isa.ahmed said:
when the flashing finsh and say done...and show the green light in the ODIN. the phone did not start up
dose this mean it break or dead charger?
as m not shure if the battery is full or not.
anyway i can pass the battery by over it with cuted USB cable?
Click to expand...
Click to collapse
If you got a green light, I would think it should at least turn on. However, if it was a successful flash, it should charge with the phone off. A bricked phone and a bad charger would both look the same: dead.
Try a different charger or battery if you think your battery could that dead. However if your battery died during your flash, that could also be the cause of your brick.
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
isa.ahmed said:
i charge the battery...and nothing happend
will the USB JAG solve it?
as i read in some post this will not
i need to send to some one to do it by opeing the phont it self
Click to expand...
Click to collapse
A jig is worth trying, but I suspect it will not solve your issue. You are correct, you need to send it to someone to have it fixed. Send a PM to AdamOutler or Connexion2005 and they can point you in the right direction.
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
isa.ahmed said:
what a crapy phone
i had Moto Defy and i never face same issue
so now am end with usellss phone..and need to theough away
what a waist of mony
Click to expand...
Click to collapse
You moto defy never flashed boot loaders since Motorola always had them locked down, and if you didn't know what you were doing flashing the stock Emma's that had boot loaders then it is not the phones fault. You should never really have to flash boot loaders and that is the ONLY risky part in flashing on these phones. Other than that Samsung cappys are almost TRUELY unbrickable (HARD BRICK) unless you mess up flashing boot loaders. WHICH YOU DID WHETHER YOU KNEW IT OR NOT BY FLASHING THE STOCK ODIN. SEND IT FOR UNBRICKABLE MOD, it is cheap repair and you WONT run into your same mistake ever again.
Sent from My KickAss CM7 Captivate
so no way i can do it here?
need to send it?to who i send? and who to trust?
i found some one will do for 50$
http://www.mobiletechvideos.com/blog/?page_id=776
Adam Outler
Sent from my SGH-I897 using xda premium
and other issue, i never toch the bootloader of it
i only re flash the OS of it only..and end with black screen.
this gay he will do what?
can the agent do it?
as it will be easer than to send it
can i have link of who will do it
Ok I did something stupid with my Galaxy S. I didn't pay attention to the firmware I was downloading i did a search for orange branded i9000 Firmware, and was downloaded from a site. Legit firmware and all. So I went to flash with odin like I have done lots of times. Came up fail, so I figured something happened during transfer, so restarted it back into download mode and reflashed again. FAIL again. Restarted and it would not turn back on. The unfortunate to all this is, the firmware after looking in horror at my galaxy s and looking back at the screen said I9100 above and I did not see that at all.
Sooo even with a USB jig this will not show a download menu, no recovery mode, no screen when plugged into charger. Anyone have any tips before I attempt the unbrickable mod?
post you question on darky rom forum they might b able to help
If even the Jig does not work i would try the unbricablemod. I dont't know an other solution to revive your phone than the UnbrickableMod if your phone doesn't boot into the Downloadmode with a Jig. So you have nothing to loose just try this Mod.(it could be your last hope to rescue the phone without sending the phone to Samsung) I didn't try it yet because i ever could revive my phone with the Jig but I've read some reports in a german forum and the users there are reporting that the Mod does rescue the phone even if the Jig doesn't boot your phone in Downloadmode.
You can find the unbricablemod i'm talking about here. http://forum.xda-developers.com/showthread.php?t=1153310 It's called "one click-unbrick". Just follow the given instructions and your phone schould work as before
Is your phone really bricked?
Is your phone bricked, or is it stuck at boot???
Normally, if a phone gets bricked, you see the screen of death: a phone logo and a computer logo, with an exclamation mark in between the two...
By the description, it looks like your phone is not able to boot, and is stuck at the screen, where it says: i9000
try putting it in downloading mode, and use odin to go back to stock firmware....
If you can't even turn on your phone, maybe your battery is flat after all that flashing
nwsk said:
If you can't even turn on your phone, maybe your battery is flat after all that flashing
Click to expand...
Click to collapse
^^^ That may be the case, try to get another battery or chargning this batter outside the phone (wire to to a 5v source).
Sidenote: I think that download mode draws power from the usb (the phone will stay on even if the battery is removed [at-least mine does])
If the jig does not work then you probably flashed the bootloader or something...which is bad, in that case, unbrickable mod may be your only hope.
I revived it with just the software version of the unbrickable tool. Only have like 2 seconds to do it in linux when you connect the phone, but it put it into a white screen and I flashed with heimdall and I am back up and running. Thank you all!
so you flashed a stable ?
Yep I posted stable. It's weird because if your device shows up in windows some weird device you only have have a couple seconds in linux to make it flip into download, but its doable and I didn't have to hardware mod anything. Back to a perfectly working Galaxy S
Good for you !
You did it well, nice one! ;-)
I was to about to ask you to check your battery but glad you fixed it
updated my galaxy to gingerbread 2.3.3 and was trying to root it via odin (my first attempt btw so all responses in ideot proof language please) which crashed part way through the flash and was left with a screen showing the phone ....... pc icon,
managed to get the phone into download mode and tryed to reflash following a few of the posts on here about bricked and part bricked phones and at one stage reflashed the pit file wich failed i am now left with a phone that wont do anything except lights up the two buttons on the front, no download mode no recovery mode, if i power off they go off and if i press them they light back up so the switchs seem to work.
the phone is not recognised by kies or my computer on the pc but is recognised by odin and loads up the drivers when plugged in and shows a sucessfull pass update if i flash a new pit pda or csc file but fails on the phone one constantly.
original firmware was
pda:i9000 bujv9
phone:i9000 bujv3
csc:i9000 gvodjv5
get the odin pass flashing stock files of xxjvo and sevrel other of the dead phone pits and tar files but still dead
have tried different usb lead and dont have a 301k risistor as the nearest electronics shop is 50 miles away n im without a car atm.
please help as i love this phone and run everything via it and im in constant battles with iphone owners about how sumsung and andriod os kicks its but and im looking pretty stupid with a dead phone.
thank you in advance................looney
Sorted now shoved it to a repair shop to jig it had to do so many solder links to get it going.
Sent from my GT-I9000 using XDA App
next time it happens check out "puggerduk unbrick my sgs on tube "and also darkyrom forum is amust goodluck love my sgs also hahah
Thanks mate yeah ill check them out anyway, did a semi brick last night tried to reflash my pda n pit to cf root only 2% batt oops.
Waited till the batt charged on the pc phone icon and managed to reflash it and bring it back to life again,
found a usb lead in poundland for a quid just gotta find some resistors now.
sent by looney on his galaxy gti9000 via xda app u no u gotta love the droid
My Captivate had been acting up so I was Trying to Flash with Odin back to Stock GB. Odin failed and now I have the message "Firmware upgrade Failed". I have tried using my Jig to get to Download mode and it won't go so I assume I have "True Hard Brick". The phone is 2 years old and I can get free upgrade in a Month at AT&T and I have an old iphone 3 I can use for now so not a big deal but I was wondering is there a possible way I can try to unbrick a Hard Brick?
Thanks
That message doesn't mean you're hard bricked. If you see anything on the screen, you're not hard bricked.
Try flashing back to stock with Odin again (use that screen as download mode), or use Heimdall if Odin isn't cutting it.
jmtheiss said:
That message doesn't mean you're hard bricked. If you see anything on the screen, you're not hard bricked.
Try flashing back to stock with Odin again (use that screen as download mode), or use Heimdall if Odin isn't cutting it.
Click to expand...
Click to collapse
Thanks. So I should be able to plug into my Computer with this screen showing an Odin "should" see my phone on a COM?
EDIT: Thanks again. When I rebooted my Computer and Opened Odin and plugged in phone it Reflashed Stock
please dont post here....this is dev only isn't it? put it in Q&A...with that many post counts you should know by now
Thread moved
As stated, questions NEVER go in Development.
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Chaostar said:
Hi guys,
I'm in a problem with my GNote... I am (or was) running Android 4.0.4 stock from Samsung, then today completely out of the blue the phone froze and I had to reset, then it was stuck in the Samsung Galaxy Note logo screen. I tried removing the SIM and SD card, etc but nothing. Then I tried reinstalling the ROM via Odin but it got stuck in "Writing NAND...". Then I read in a forum that I could try a repartitioning with the PIT for my memory size (16 GB). I tried this but it got disconnected in the middle (the cable connector is a bit unstable) and now I can't get it to boot ANYTHING. The screen is completely black and Odin doesn't recognize the phone, can't get into recovery mode, etc.
Any idea? My tel company told me that it has a little marking that looks like the phone was hit and so they can't accept it for warranty tech service. I will try Samsung Service Center directly but before that, is there anything I can do???
Thanks!!
Click to expand...
Click to collapse
Is it starting up? If note just remove ur battery for around 10 mnts, then insert that try pressing vol down + power + home for 20 seconds and then press vol +, just check if ur pc could detect the device and also if the battery is enough charged.
If this detects ur device, u have chances or else only jig is the option.
Hope 4 the best
Press THANKS if this helped u :fingers-crossed:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
jig mite help you.. cuz even when the phone doesnt boot up .. the jig mite force it to download mode.. check with that.. if not then get it to the samsung service.. how did u reset... were u rooted? stuck on NAND write is not a good sign
Chaostar said:
I don't think even jig is an option now... the phone screen is completely black, it doesn't even get into the logo screen... going to Samsung right now.
Click to expand...
Click to collapse
Why not?
The Jig costs 2-3 US$ from Ebay, China...
Give it a try, its simple:
- remove battery
- put the Jig in
- wait a bit and put the battery back
- wait, pull battery out, pull Jig out
- connect the phone via USB to your PC, put battery back and start Odin
And if you are a lucky man you can flash a new firmware via Odin.
If you have an corrupt bootloader, Jig helps.
If there is a hardware problem you need a new maniboard.
How you described your Note there is possible only a corrupted bootloader ( Jig ) or a dead mainboard ( Samsung repair ).
Hmmm I'd say there is some serious problem. Originally (yesterday) my Note was working OK and then spontaneously (I didn't do anything or bump it or anything like that, I was just writing an email) it froze and so I used the reset combination (power+home buttons), then it entered into boot loop, it started and when it got to the Galaxy Note logo it rebooted, it did this 2 or 3 times and then it was stuck in Note logo. I took out the battery, put it back in, the same. I waited 10 minutes with the battery out, again the same results.
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same.
So I read somewhere that I could try repartitioning the memory using Odin and the PIT file for my memory size (16GB), I tried this but just when I was in the process, the USB connector (which is a bit loose in my Note) disconnected for a second and reconnected and it was all. Phone dead. I'm guessing there's nothing there in the memory to boot from or to... so I'm taking it to Samsung.
Chaostar said:
But I could get into recovery mode, so I tried re-flashing my ROM (LRQ Samsung stock from Germany, this was the only flash I did in my Note since last year when I bought it, I had 2.3.6 and then last month I updated to 4.0.4 via Kies official download and then using Odin I flashed the LRQ Samsung 4.0.4 stock because it has new features like the 3D gallery) but it got to "Writing NAND..." or something like that. I tried this several times and it was always the same..
Click to expand...
Click to collapse
bro Chaostar
your Gnote is totally got a called ( brick ) same my gnote but it is revive via repartition.. with 2GB loss
first you do is make sure your battery is full charge and forced your Gnote into DOWNLOAD MODE.....
how to forced to download mode?
1 press home button + volume down then press power button,, if result is not lucky...... go to second way
2 use jig for download mode
(a) remove batt,,
(b) then attach the jig to usb port
(c) then put back the batt,,, then wait almost 60second
(d) after 60sec, remove jig then press volume up,..... one press only.... it shown black screen but the system status is download mode.
(e) open odin pc, connect your Gnote,,, see and wait.. if you see your gnote is detected,,,, your welcome you have a chance.. then flash kernel only ( safe_CM9_kernel.tar) then reboot to recovery then flash the JB:CM10:HYBRD] PARANOIDANDROID [2.20 or follow the repartition procedure,,
( f) what if not detected?.......... don't worry..:highfive: i have last option for you... this is revive your Gnote via (JTAG)..
GUDLUCK and see you..
Well I already left my Note in my cell company, it is within warranty period and I hope they can fix it. The only problem is that it has a slight marking that looks like a bump on the side and they said that this could void the warranty, but they will give me a budget if it has to be paid for, I hope they don't have to change the whole mainboard, and if they want to charge me I'll take it to Samsung directly as a last chance. After that, I guess it's jig.
What really gets to me is that this started as a sort of spontaneous error, I didn't do anything to the phone before the initial freezing and unability to boot. The problem is that then I tried the PIT stuff. Well, let's see what happens.
Thanks for your suggestions!!
Chaostar said:
After that, I guess it's jig.
Thanks for your suggestions!!
Click to expand...
Click to collapse
ABOUT JIG''... HERE THE INFO...http://droidangel.blogspot.com/2011/05/how-to-make-samsung-galaxy-s-download.html
about JTAG .. here the info,,http://www.youtube.com/watch?v=d0SX3iDuIZc&feature=youtube