Related
Here is my first post I obtained the code from AT&T, this does not require any loading of software.
Needed:
1.) SIM card other than AT&T, with no puk code or pin #
2.) code 55397951 (may be IMEI specific)
*warning, if the code does not work, do not try again, the phone will be permanantly locked after 5 trys.
If successful it will say Unlock code passed.
Enjoy,
Usually..... it's IMEI specific.....
Welcome to XDA!
This code is IMEI specific . That being said, there are free tools for unlocking the Tilt available on this site .
When you have a moment, read up on the Kaiser Wiki (linked in my sig). It will teach you all that is necessary for customizing and modding your new toy.
NotATreoFan said:
Welcome to XDA!
This code is IMEI specific . That being said, there are free tools for unlocking the Tilt available on this site .
When you have a moment, read up on the Kaiser Wiki (linked in my sig). It will teach you all that is necessary for customizing and modding your new toy.
Click to expand...
Click to collapse
and adding to this ... it will help you avoid creating threads like this.
thesire said:
and adding to this ... it will help you avoid creating threads like this.
Click to expand...
Click to collapse
LOL... really!
Close please.
sorry,
please delete post...
mayad79 said:
sorry,
please delete post...
Click to expand...
Click to collapse
Don't get discouraged. If after reading and searching you can't find, feel free to PM me or other users. Most accept PMs and don't mind it. Or if you can't find your answer and there is no existing thread, go ahead and create your own
lighten up guys
Hello, after a upgrade of my ROM with a CM7, my IMEI has change and is now
So is it possible to reset my original number ? because I because I can not connect in 3g.
Thanks for your help.
Mod Edit : dont post ur IMIE and ask this question in the Q&A its a sticky
this thread moved to General
OMG
Can you flash rom back to original one
this is strange, actually, IMEI number depends on the Chipset of the phone, isn't it ??
And you should not post your imei puplicly!!!
Sent from my Optimus 2X using XDA App
In the Galaxy S the imei was in a file in the /efs folder... I don't know in O2x...
gaeng4665 said:
And you should not post your imei puplicly!!!
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
I know, but it's not my number, so I don't care
I'm looking for a solution like Samsung Galaxy S
there was a similar thing with the ZTE Blade (Orange Sanfransisco) when CM7 came out for that. So NO it's not entirely in the hardware.
Not help but more of a possible confirmation that this is a problem:
http://review.cyanogenmod.com/#change,6031
was put up 5 hours ago
That's only for Samsung phones, LG ones don't have an /efs partition.
We do have an /lgdrm partition though, which apparently on some phones does contain IMEI info, although the files (system.id & device.id) mentioned doesn't exist there on the O2X. I don't know if that controls the IMEI or just displays it or what.
Besides, that's a ClockworkMod recovery commit, not a CM7 one per se.
What is the solution that I 've the same problem happened to me Friends?
There is no solution.
Rusty! said:
There is no solution.
Click to expand...
Click to collapse
There is solution if you have your original imei with you or box with you. There is one unapproved
Commit in cm git, cherry pick it and set your imei as you want. And then when you have it back, go to recovery and wipe all install official nightly or modaco or any other
mate imei will report exactly what the address could you tell us a little more detail?
That is surprising. Very surprising in fact, given that in many countries it is illegal to tamper with an IMEI number.
OK, so in this case it's restoring an IMEI, but it has the potential to be used nefariously.
Just a a brief look in the code review, but can't find it, any chance of a link?
Well thank you I have nothing more to do
Rusty! said:
That is surprising. Very surprising in fact, given that in many countries it is illegal to tamper with an IMEI number.
OK, so in this case it's restoring an IMEI, but it has the potential to be used nefariously.
Just a a brief look in the code review, but can't find it, any chance of a link?
Click to expand...
Click to collapse
Unfortunately steve removed that from review i guess, but it was there, have seen it, it was some new stuff which can let us change all IMEI, mac address wifi, bluetooth and also hide sim card verification stuff. and steve was strictly against it, as google would get angry if this would be included in cyanogen, so he must have removed it from review, so cant be cherry picked in kangs too. Now i wish i would have taken it before it went down
Oh that, yeah I do remember now you mention it... didn't realise it could change IMEI though, not properly at least. Caused a huge ****storm!
yeah, it had some heading like privacy or spoof word in commit change, but cant find it. If it was there, i would have helped made a little kang for him to get back normal
problem !
I have the same problem imei imei changed the phone number was out of service after nvflash
eh... Dont know why my post "disappeared" but there is a way to recover your original IMEI for P990 device.
Send me a PM and i will send instructions to recover IMEI.
There is another option
google is your friend
Hi
No Risk. 100% Working And Tested.
Working on 10.3.1.A.2.67
Download Mod edit: links removed
So Sorry for the Private Issue. I didn't know the file is in Private. Please Continue your Download
So what is it exactly you want people to download?
Sent from my C6603 using XDA Premium 4 mobile app
smells like a virus/hack ...
sriszone said:
Hi
No Risk. 100% Working And Tested.
Working on 10.3.1.A.2.67
Download Mod edit: links removed
Click to expand...
Click to collapse
One: its set to private, so we cant check it out anyway.
Two: if its Kingoroot dont even bother posting it here.
Otherwise id be happy to check it out, I have an old pc I use as a sandbox for anything shady, I let the viruses have it then just format and imge restore it periodically.
I am So Sorry.... I didn't know the file is in Private. So Sorry. Now you guys can download
golfgtiedition30 said:
So what is it exactly you want people to download?
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So Sorry for the Private Issue. I didn't know the file is in Private. Please Continue your Download
aethervagrant said:
One: its set to private, so we cant check it out anyway.
Two: if its Kingoroot dont even bother posting it here.
Otherwise id be happy to check it out, I have an old pc I use as a sandbox for anything shady, I let the viruses have it then just format and imge restore it periodically.
Click to expand...
Click to collapse
So Sorry for the Private Issue. I didn't know the file is in Private. Please Continue your Download
Its just KingoRoot.
The .exe has a different name, but it does the same thing: it tries to send info to another country, and it wont proceed with rooting unless you allow it internet access. Sandboxing it to a local network doesnt work either, it has to confirm contact with the mothership.
This same program is being promoted on forums and sites all over the net, it shows up with the name changed, even packed in zips with padding files so it shows as a different size. Someone is trying real hard to get this into wide distribution.
aethervagrant said:
Its just KingoRoot.
The .exe has a different name, but it does the same thing: it tries to send info to another country, and it wont proceed with rooting unless you allow it internet access. Sandboxing it to a local network doesnt work either, it has to confirm contact with the mothership.
This same program is being promoted on forums and sites all over the net, it shows up with the name changed, even packed in zips with padding files so it shows as a different size. Someone is trying real hard to get this into wide distribution.
Click to expand...
Click to collapse
it just want to download drivers and so on.
however, here is ripped and repackaged kingoroot, anti-Ric included too : http://rghost.net/50376561
just unpack archive in any directory, enable usb debugging, install adb drivers, then run root.cmd
it looks like this stuff working on most ( if not all ) latest 4.x firmwares
Kingoroot....This has been removed before because of suspicious activity!
Sent from my C6603 using XDA Premium 4 mobile app
Thread closed and links removed until such time as the validity of this software can be determined due to some security concerns regarding this application.
Hi! I have a problem, installing one particular .apk on my HTC One (rooted, S-OFF, Android 4.3, CyanogenMod 10.2 stable). I'm trying to install this game callled Shadowgun with Root Browser file manager, but i get this error everytime: 'Parse error: there was a problem parsing the package.' What should i do ? So far i've installed many apk's with no problem. I've also tried to install from Google Drive, same problem. Maybe it's something with this particular app, because there are versions for different GPU's (mine is Adreno so i've tried that). Any advice ? Thanks !
BR4TO92 said:
Hi! I have a problem, installing one particular .apk on my HTC One (rooted, S-OFF, Android 4.3, CyanogenMod 10.2 stable). I'm trying to install this game callled Shadowgun with Root Browser file manager, but i get this error everytime: 'Parse error: there was a problem parsing the package.' What should i do ? So far i've installed many apk's with no problem. I've also tried to install from Google Drive, same problem. Maybe it's something with this particular app, because there are versions for different GPU's (mine is Adreno so i've tried that). Any advice ? Thanks !
Click to expand...
Click to collapse
Where did you get the game from? Here is the official link:
https://play.google.com/store/apps/details?id=com.madfingergames.shadowgun&hl=en
I'm not sure, a friend sent me the apk. Said that it worked for him.
Sent from my One using Tapatalk
BR4TO92 said:
I'm not sure, a friend sent me the apk. Said that it worked for him.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Sorry but if a friend of yours sent you the apk, you didn't pay for the game. You are on a developer website here, what are you expecting? We will not provide help to bypass payment of apps here.
refer to this forum rule:
6. Do not post warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez and nor do we permit any member to request, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
Click to expand...
Click to collapse
Mod edit: link removed (4pda links not allowed)
Booroondook has first done FUSE ROM and now there is he again... Bravo! Many, many improvements and fixes. Sorry he is not paying attention to XDA (doing all really for free, not for donations here) but he deserves all credits.
Full Post translation and download link
Here is the full post with download link, please donate to the dev if you like his work.
The firmware is designed as a "designer" under both options screen resolutions (800x480 and 1024x600). Everyone can afford to assemble his own version. How to assemble the firmware is described in detail here:
The order of assembly of the firmware
The firmware is available as a set designer or "do it yourself" - as anyone this thing called - and is a set of modules for self-assembly of the finished image of the firmware. The assembly is made on a computer running Windows (versions from XP and higher).
How to assemble:
1) Download the archive unpack into any empty folder on your computer (the full path to the folder does not contain spaces, non-Latin characters, punctuation marks and special characters, so not recommended for unpacking on the desktop, in the "My Documents", etc. )
2) turn in this same folder
3) Run start_rus.bat file (or start_eng.bat, if you are dearer to the English interface)
4) you will be asked to choose a processor. Only two options - RK3066 and RK3188. The selection is made by entering the numbers specified opposite processor type, and then pressing the Enter key
5) The following sentence - to select the screen resolution. Options are also two - 800x480 and 1024x600. The selection is made in the same manner as in the previous paragraph
6) After this, the firmware build process, which takes less than 10 seconds.
7) The result of the process - file update_ <vash_protsessor> _ <vashe_razreshenie> .img, which, after renaming update.img you can sew in a familiar way radio When you first start after flashing is (as usual in my firmware) conducted preset application and then fit /system/build.prop configuration file under the processor type and resolution (800x480 for the recorder will be installed screen density of 160 to 1024x600 - 240). Then reboot, after which the tape recorder will be completely ready for operation.
Features flashing process. Due to the fact that changing breakdown flash memory sections (including as compared with previously released on FUSE-firmware Android 4.4.4), the process can be performed in two stages, both stages are the same.
That is, you normally install firmware mode rekaveri (thus necessarily choosing the option with full data cleaning). The device is rebooted and ... hang on animated screensaver. If you want to wait, wait - but the result is not guaranteed. If you do not want to wait, press the RESET, then (without releasing RESET'a) - POWER. Without releasing the POWER, release the RESET, waiting 3 seconds and release POWER. All - a few seconds later we are back in rekaveri mode where once again just repeat the flashing process - again, choose the menu item, involves the installation of firmware and data cleaning, and ... forward. After the second cassette recorder firmware to be released to the operating mode (although longer than usual, as is the formation of the primary file system).
Option: instead of the second flashing, you can try to select a lower menu item - "clean and reset to factory condition."
As you understand, all your data will be lost after flashing, so advance reservations and they do not say I did not warn.
Attention!!! Those who do not have the RESET button and mechanical buttons. Before flashing be sure to ask if you can overload the radio in rekaveri mode from the "hung" or off state. If this method is not, then you better not reflash.
OTA-upgrade
The firmware is the possibility of prompt automatic updates. OTA (Over the Air - "air") or FOTA (Firmware Over the Air) - a technology that allows to (semi-) automatically obtain and install the update packages. User Intervention here minimum - it is only necessary to press the button, confirming compliance with the installation. Well, there is still a button manually check for updates. And all the rest State makes self - sends a request to the server, downloads the update package, checks it for validity (verifies the certificate used to sign the update package with a key available in the firmware), reloads the State in rekaveri mode where automatically launches the update process, and finally PG reboots to the operating mode.
Naturally, for the possibility of State OTA-update should have a working Internet connection. Automatic prompting to check for updates are sent automatically after every download SI operating mode and communication with the Internet. If desired, you can request a renewal of the "out of order" by pressing the appropriate button in the dialog "Settings" - "About your device" - "OTA update system." Another essential requirement to enable OTA updates - is the availability of free space on the "GPS-card" (/ mnt / external_sd), and (of course) the availability and serviceability of the card itself. In case of problems with the card update can be downloaded to start, but then will be a network error. Available space on the card must be two times larger than the size of the update package. As practice shows, the usual pack "weighing" of up to 20 MB. Although there are cases of 55-MB blocks. In general, if you keep on the card 120 MB of free space, the problems you should not be.
Cancellation OTA update? Unfortunately, a simple interactive option is not provided. But you can do the following: Open the file for editing /system/build.prop. Find it (towards the end of the file) option ro.product.ota.host = www.booroondook.ru: 2300. Replace the URL-address of the update server (www.booroondook.ru:2300) to something "obscene". For example, suppose that this line will look like this: ro.product.ota.host = localhost. Save the file, restart the SU. Everything - Updates you will not torture any more.
Disclaimer: The self-fulfilling complicated technical procedure for flashing the device, you will definitely take full responsibility for possible negative consequences up to the irrevocable failure of your head unit.
Version - from 06/03/2016
Link to the firmware (made on the basis of KLD-20160511): https://mega.nz/#!XFZUQKAI!H2L7gsRIuVn1D7x7slQjE_XclmVP6RWXRp-VRmc5-uU
Innovations regarding the factory options:
- Cloning a resolution of 800x480 by kernel patch (kernel.img)
- Completely redesigned Russian translation
- Root access running SuperSU
- 5 launcher to choose from ( "Settings" - "Desktop")
- 4 options "Bluetooth" application ( "Telephone"), 5 application options, "Music" and "Radio". Alternative applications are installed through the "OEM" application, return to the original (nominal) version - after the usual removal of the application settings ( "Uninstall updates")
- In settings Added "For Developers", "Screen" - "Font size" and "Display" - "Display Density"
- In settings added to the monitoring data
- OTA-update functionality
- Added missing "OEM" applications, "Weather", "DVR" (Annex "Weather" - in the version revised respected vitarkananda)
- Added widgets "Weather", "Music", "Telephone", "Video" and "Navigation", ported from the firmware for MTCD
- Partition "OEM" is increased to 384 MB. This section can be used, for example, as a "warehouse" APK-relevant distributions
- Built-in support for working with trip computer Multitronics MPC-800 (Bluetooth-name DUAL-SPP)
Attention:
1) please do not ask questions why this firmware does not work Xposed. The answer is - it does not work and on the drive firmware, and generally have Xposed big problem with Android 5 (or higher). When someone finds a way to get to work on our Xposed firmware, in principle, I immediately implement it in its firmware.
2) Management of screensaver (MTCScreenClock.apk) is only possible through /system/build.prop File Edit (parameters ro.product.screenclock = true | false and ro.product.screentimeout = 5 | 10 | 15 | 20 | 30 | 60 ). Interactive control timeout in the factory firmware is not provided, and I realize it too failed.
Note: Because an application "Weather" uses a revised version of vitarkananda, the new version of the application (as they become available) can be installed instead of the usual simple by replacing labor-intensive system file.
For developers, the public certificate signed APK following: MTCBlueTooth.apk, MTCMusic.apk, MTCRadio.apk, MTCScreenClock.apk. This means that signing their "swing" application to the same certificate (and increasing code version), you can give users the ability to easily install your development instead of forcing them to carry out the replacement of system files with setting permissions.
https://mega.nz/#!XFZUQKAI!H2L7gsRIuVn1D7x7slQjE_XclmVP6RWXRp-VRmc5-uU
[size=+1]Thread cleaned.
Keep the drama out of the public forum. If you're not a moderator you have no place telling other members how to post, no matter which side of the argument you're on, use the report feature and let us deal with it. If you have a problem with a certain member/developer do not create drama in the public forum, again, use the report feature. If it isn't a reportable offence then just leave it alone or take it elsewhere. If you believe there is a developer that is stealing someone's work and/or not giving credit, you guessed it... use the report feature. See the theme here? XDA isn't the place for your petty squabbling, if you have a valid case to argue then take the right approach and call on the moderation team. And I'll repeat, keep this drama out of the public forum. This goes for both of you.[/size]
Heisenberg said:
[size=+1]Thread cleaned.
Keep the drama out of the public forum. If you're not a moderator you have no place telling other members how to post, no matter which side of the argument you're on, use the report feature and let us deal with it. If you have a problem with a certain member/developer do not create drama in the public forum, again, use the report feature. If it isn't a reportable offence then just leave it alone or take it elsewhere. If you believe there is a developer that is stealing someone's work and/or not giving credit, you guessed it... use the report feature. See the theme here? XDA isn't the place for your petty squabbling, if you have a valid case to argue then take the right approach and call on the moderation team. And I'll repeat, keep this drama out of the public forum. This goes for both of you.[/size]
Click to expand...
Click to collapse
Your "cleaning" means no one has a clue what on earth has gone on and what all the "drama" was, as there appears to be just 2 posts left, one a quote from booroondook on xda.
It would probably be best if you removed the text from your post, or simply put "Moderator cleaned thread" or something, - currently your post confuses everyone as youve removed text and/or posts, so no one knows what you are talking about.
Since when are 4pda.ru links not allowed ? I have used them and seen them used many times over the past 2 years, or is that just referring to their use in thread titles ?
typos1 said:
Your "cleaning" means no one has a clue what on earth has gone on and what all the "drama" was, as there appears to be just 2 posts left, one a quote from booroondook on xda. If you'd like to become a moderator please feel free to make an application but until then please leave it to us. If you'd like to become a moderator feel free to make an application but until then please leave it to us. If you'd like to become a moderator feel free to make an application but until then please leave it to us.
It would probably be best if you removed the text from your post, or simply put "Moderator cleaned thread" or something, - currently your post confuses everyone as youve removed text and/or posts, so no one knows what you are talking about.
Since when are 4pda.ru links not allowed ? I have used them and seen them used many times over the past 2 years, or is that just referring to their use in thread titles ?
Click to expand...
Click to collapse
You're not meant to have a clue what's going on, that's the entire point of cleaning a thread, to remove inappropriate posts so they cannot be seen. I'm not sure why this even matters to you, you weren't involved, it isn't your business, and this thread is now back to its original purpose. Thanks for your input, but no, I won't be editing my message, it was left for a reason.
4pda links aren't allowed on XDA and haven't been for quite some time. If you are using them I suggest you stop because it could affect you negatively. We can't get to every link on this site, we act on reports made by our members, when we receive a report about disallowed links (or stumble across them) they are removed.
If you'd like to become a moderator feel free to make an application but until then please leave it to us, thanks.
Heisenberg said:
You're not meant to have a clue what's going on, that's the entire point of cleaning a thread, to remove inappropriate posts so they cannot be seen. I'm not sure why this even matters to you, you weren't involved, it isn't your business, and this thread is now back to its original purpose. Thanks for your input, but no, I won't be editing my message, it was left for a reason.
4pda links aren't allowed on XDA and haven't been for quite some time. If you are using them I suggest you stop because it could affect you negatively. We can't get to every link on this site, we act on reports made by our members, when we receive a report about disallowed links (or stumble across them) they are removed.
If you'd like to become a moderator feel free to make an application but until then please leave it to us, thanks.
Click to expand...
Click to collapse
Why 4pda links are not allowed? Where we can find list of prohibited sites?
pa.ko said:
Why 4pda links are not allowed? Where we can find list of prohibited sites?
Click to expand...
Click to collapse
The main reason is because 4pda is rife with piracy, warez, and there are major issues with GPL compliance on that site. You're also not meant to direct members to competing forums.
Thanks for explanation. True. But they also have original work like this...
pa.ko said:
Thanks for explanation. True. But they also have original work like this...
Click to expand...
Click to collapse
There is no way for you or I to know if that work is actually original. 4pda is notorious for kanging. On the surface it looks like original work but no way to prove that. This is beside the point though; 4pda is blacklisted for all of the rotten crap that takes place there, it's that crap that pulls down any original work that might be posted.
tried...not working
went to build for rk3066 pressed 1 then enter got error message..."sorry RK3066 CPU does not support in this firmware" just thought i would let others know
WECoyote633 said:
went to build for rk3066 pressed 1 then enter got error message..."sorry RK3066 CPU does not support in this firmware" just thought i would let others know
Click to expand...
Click to collapse
Your a dev and youre trying to make a RK3066 ROM ? Or youve just tried to install it on an RK3066 unit ?
typos1 said:
Your a dev and youre trying to make a RK3066 ROM ? Or youve just tried to install it on an RK3066 unit ?
Click to expand...
Click to collapse
not a developer...followed instructions in first post got error with the first step
WECoyote633 said:
not a developer...followed instructions in first post got error with the first step
Click to expand...
Click to collapse
This ROM is not compatible with 3066.
The build.bat is from a previous version.
miffymiffy said:
This ROM is not compatible with 3066.
The build.bat is from a previous version.
Click to expand...
Click to collapse
thx for info..that being the case this info might be mentioned in the first post....and the diy package perhaps shouldn't give the option to choose between the 3066 and the 3188..will continue to wait for a possible rk3066 version of 5.1.1....thx again
WECoyote633 said:
thx for info..that being the case this info might be mentioned in the first post....and the diy package perhaps shouldn't give the option to choose between the 3066 and the 3188..will continue to wait for a possible rk3066 version of 5.1.1....thx again
Click to expand...
Click to collapse
It is mentioned in the Lollipop thread and I think the original thread for booroondook's ROM, which is still open, this thread is kinda superfluous really.
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
mr-mo7ammad said:
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
Click to expand...
Click to collapse
Answered 10 times already!
MCU is not important, you already have MTCB unit so you can flash MTCB roms (4.4.4. or 5.1.1.)
you are probably afraid because of ksp-v2.86, that does not matter so you can flash any MTCB based rom.
mr-mo7ammad said:
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
Click to expand...
Click to collapse
Would probably be a good idea if you read the wiki before posting.
Does anyone know how modifing exception apks for MTCScreenClock? After I modified Build.prop to activate the Screenclock, it only works when radio apk, music apk,... are working and I'd like it works always except when I'm using GPS navigator.
By the other hand, I'd like to change transparent background for MTCScreenclock and I know that the installed MTCScreeclock.apk is not the issue because I used the same and it wasn't transparent in KitKat versions. Thank you
I have got installed in my headunit last LP version of DSA (5.1.1.).