Database Develop

[Q] motorola razar XT890 Stuck in boot logo! Help!!

motorola razar XT890 Stuck in boot logo i try flashing with rsd lite but i c ant;
Trafsfer Mode:
USB connected
Fastboot reason: Flash Failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
any help plz

imouzzari said:
motorola razar XT890 Stuck in boot logo i try flashing with rsd lite but i c ant;
Trafsfer Mode:
USB connected
Fastboot reason: Flash Failure
usb connected
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
any help plz
Click to expand...
Click to collapse
As the log says, u are downgrading the gpt partition and that may never be done. (atleast till someone founds out how). If u are on JB, use a JB firmware. Likewise with ICS, use ICS. If u are on KK, there is no RSD flashable firmware yet. U need to clean format your cache or even the data partition in the recovery. If u still want to go back from KK to JB. Use the JB to ICS guide (downgrade).

Hazou said:
As the log says, u are downgrading the gpt partition and that may never be done. (atleast till someone founds out how). If u are on JB, use a JB firmware. Likewise with ICS, use ICS. If u are on KK, there is no RSD flashable firmware yet. U need to clean format your cache or even the data partition in the recovery. If u still want to go back from KK to JB. Use the JB to ICS guide (downgrade).
Click to expand...
Click to collapse
Thanx i am in jb firmware i try flashing with jb with rsd flashabale firmware but always say erore any idea plz iam sory for my bad english

A temporarily solution is to use mFastboot to flash the system_signed, boot_signed and recovery_signed. See the general section/my guide(index) for more info.

try
try to download one of these http://forum.xda-developers.com/showthread.php?t=2239706 and flash it with rsd version 6! it worked for me i downloaded the EUROPE british edition
good luck

http://forum.xda-developers.com/showthread.php?t=2239706 download firmware frome this,boot ur phone into fastboot by pressing power button and volume button and leave the power button after u get a vibration,use rsd lite 6.1.4 ,and connect your phone to system after u enter fastboot mode ,open rsd lite ,extract firmaware in one folder then from rsd browse to the xml of the firmware and press start and it finishes the rest ,please have good battery backup

Hello everyone,
Forgive me for my bad english. I have the same problem with my Razr i. But i have updated to Kitkat through OTA update. I have tried flashing with RSD lite but no luck. I couldn't find a Kitkat firmware. What should I do now? Thank you all.

Thought I'd put an update on here as I was trying to fix my Dad's Razr i (for about the 4th time.....) and had this issue with the gpt downgrade error.
Eventually thought I'd try a custom rom so went through the bootloader unlock process via the Motorola website and after that completed RSD then let me flash the stock rom.
Not sure if this is a known "fix" but might be worth a go with the usual caveat of unlocking your bootloader will obviously void the warranty
On a side note given the issues with this handset and the problems I had with my own Moto G (4G) I've begun to loose faith somewhat in Motorola as both devices exhibited similar emmc related errors as my G eventually died with what appeared to be memory/flash related HW failures.

[Q] Stuck on Fastboot

Hi everybody,
A few days ago, I rooted my Mexican XT1225. I shut it down for a day (my main cellphone is the new Moto X), turn it on again and now it's stuck on fastboot.
I could boot into TWRP (by flashing it temporarily with fastboot on Linux) and then I decided to wipe data and then install the new lollipop zip file. But it failed saying it could not mount /system /data or anything really, I basically have it without format, all partitions say 0MB.
So I tried flashing with fastboot, but it gave me an error when flashing the partition gpt.bin, it didn't give me an error when flashing other files. Still stuck, now I cannot even access the recovery menu, it goes just into fastboot mode and does not show the little recovery menu anymore.
Then I tried flashing with RSD, still same problem. It fails when setting the fb_mode_set and when I delete that line from the xml it fails again on flashing gpt.bin
EDIT: I am attaching a log file of TWRP evidencing this.
Any ideas on how to get back to normal? How can I redo the partition in another way?
Thanks in advance,
Gustavo

Unlocked bootloader? Just remove the got. Bin flash line

Jaocagomez said:
Unlocked bootloader? Just remove the got. Bin flash line
Click to expand...
Click to collapse
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.

gusbeto37 said:
Yes, unlocked bootloader. Removed the gpt.bin flash line and still no luck. Tried flashing several files, the Indian Lollipop, the Mexican Kitkat, nothing has worked.
Click to expand...
Click to collapse
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp

Jaocagomez said:
After re reading your post I understood what's wrong, you have to flash the lollipop OTA on stock recovery not twrp or rsd lite, once you flash it you can put back twrp
Click to expand...
Click to collapse
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)

gusbeto37 said:
I have the xml.zip file, extracted it and manually flashed partition by partition. Something I have previously done with my 1st gen Moto X, my Razr HD and even my Atrix, if I remember correctlly. Even RSD Lite should work with those files.
Still, I will try to boot with the stock recovery, since right now I cannot access it. I will also seek a way to get the xml.zip file inside the storage, since I cannot even mount it with TWRP (It shows 0mb drive)
Click to expand...
Click to collapse
Twrp for this device it's not very stable I got that errors too
Just flash mexico firmware then the OTA zip on stock recovery and you will be good to go.
If you can't access recovery press vol- and power with the phone turned off and you'll be able to select recovery

Hi,
I have tried the vol+power and cannot access recovery.
When I try to flash Mexico's firmware (through either RSD or manually in Linux using fastboot), I am unable to flash partition gpt.bin, but I can flash everything else. Yet, in spite of flashing everything else, I cannot get out of the fastboot loop.

I am attaching some photos of what happens. The first one is the only thing that boots, cannot access recovery, cannot boot normally. The second photo is what happens when I press the volume button many times.

So when you select recovery does it power off or just go back to fastboot again?

Steve-x said:
So when you select recovery does it power off or just go back to fastboot again?
Click to expand...
Click to collapse
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG

Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.

gusbeto37 said:
Hi, I dan only go yo fastboot. The menú does not appear. The only thing that appears is the photo of my previous post.
I can boot into TWRP by manually doing fastboot boot twr-recovery.IMG
Click to expand...
Click to collapse
flash mexican stock rom with rsd lite

Steve-x said:
Hmmm, doesn't look good. The fastboot screen doesn't even load the picture of the green Android. I am thinking the partition table is messed up. I know I saw something similar with the original(2013) Moto X a while back. You may want to do some searching in that forum.
Click to expand...
Click to collapse
Hola Steve,
Indeed, it looks like the partition table is messed up, I will look for that Moto X thread.
@Jaocagomez I have tried that, but it fails with gpt.bin partition flash and even after flashing everything else (RSD, fastboot or TWRP) it does not work.

After reading quite a lot on the Internet, it seems that my problem happened to some Moto G and Moto X users. Seems to be that I am trying to flash a gpt.bin that is older than the one already in my phone. I will try again when the Mexican Lollipop image is released in xml.zip format.
In the mean time, I will continue to search for solutions.

Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices

Stuck in fastboot
rehaili said:
Hi
I think I have the same issue.
I have XT1225 bought it from Amazon (I asked the company and they said Puerto Rico origin) factory unlocked. had 4.4.4 and tried to upgrade to 5.0.2. Here is what I exactly did:
devices not rooted, locked bootloader
downloaded RSD Lite
downloaded the official 5.0.2 India Firmware
tried to flash it using RSD
got an error in flashing boot from RSD
I tried to do it again and I get the same issue, I tried to flash the Puerto Rico 4.4.4 and it didnt work (it get stuck in partition gpt) and my device is dead. I tried to unlock the bootloader using the code from motorola and it says allow oem unlock from developer menu
tried doing it manually using mfastboot with both 5.0.2 and 4.4.4 and still didnt work.
please let me know if you managed to fox your problem or if anyone can help us get back our devices
Click to expand...
Click to collapse
I am facing the same problem
Though my device is different : XT1254 (verizon locked)
As bootloader is not unlocked, i cannot flash any software any way. Tried all the software from all the countries but to no avail.
The Phone is stuck in fastboot mode.
Please help

You 1225 folks might want to wander into this thread... http://forum.xda-developers.com/droid-turbo/general/tutorial-to-kk-soak-lollipop-t3041129 ... I've hashed my phone out a couple times between CM, lollipop, exposed, playing with the kernal and so on and it got me back up and running.

guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!

jazzus said:
guys I need ASAP help, stuck in reboot after update, got intsallation error 7. now im stuck on logo reboot, cannot enter recovery (I see "dead" android icon. Please help!
Click to expand...
Click to collapse
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?

Steve-x said:
We need more information. What is your original firmware, what did you try to update to and is your bootloader unlocked?
Click to expand...
Click to collapse
Ok fixed, after 20 or 30 tries I was able to enter recovery Thx!

HELPPP!

So I feel like I am really screwed on this.... attempted flashing stock via RSDLite. It began flashing fine until about halfway through the system.img ...all of a sudden it loses fastboot and my computer freaks out saying that an unkown standard usb device is attached. I figured that I would just flash a batch through recovery, but now there is not recovery image either.
So... I have no fastboot mode and no recovery mode and an unrecognizable usb device. Please help me
Edit: I have a feeling its due to a driver issue... during the downgrade the required driver probably changed... and thus disconnected in the middle of flash. If this is the case, then I feel like an idiot

diabl0w said:
So I feel like I am really screwed on this.... attempted flashing stock via RSDLite. It began flashing fine until about halfway through the system.img ...all of a sudden it loses fastboot and my computer freaks out saying that an unkown standard usb device is attached. I figured that I would just flash a batch through recovery, but now there is not recovery image either.
So... I have no fastboot mode and no recovery mode and an unrecognizable usb device. Please help me
Click to expand...
Click to collapse
Try setting up another computer. You should be able to go into bootlader mode by pressing power and volume down buttons at the same time. Hopefully you have enought battery. If that doesnt work someone should be able to help you out.

Downgrading the bootloader on Motorola devices (Nexus 6 included) results in a permanent (well, unless you can upgrade the bootloader to what it was originally) brick.

r3pwn said:
Downgrading the bootloader on Motorola devices (Nexus 6 included) results in a permanent (well, unless you can upgrade the bootloader to what it was originally) brick.
Click to expand...
Click to collapse
Wow I hope that my edit was right instead... I know for a fact that it failed during the system image portion of the flash. all I did was follow the instructions posted somewhere on this forum which basically just said... download 21.12 firmware, go to fastboot, flash with rsdlite. Guess the fact that they left out remove bootloader image is no big deal.. NOT

diabl0w said:
Wow I hope that my edit was right instead... I know for a fact that it failed during the system image portion of the flash. all I did was follow the instructions posted somewhere on this forum which basically just said... download 21.12 firmware, go to fastboot, flash with rsdlite. Guess the fact that they left out remove bootloader image is no big deal.. NOT
Click to expand...
Click to collapse
It's nothing they did wrong. At the time of writing it, that was probably the latest version. Can you still flash things via rsdlite? If so, take a look at this copy of the latest update.

r3pwn said:
It's nothing they did wrong. At the time of writing it, that was probably the latest version. Can you still flash things via rsdlite? If so, take a look at this copy of the latest update.
Click to expand...
Click to collapse
Okay so good news... I installed the older sdk drivers and my phone will now connect to fastboot mode again. wooo!!! Now, to make sure I do this right, @r3pwn , the link you just sent me was a superuser image, right? Background story as to why I am doing this, I have root and I ended up breaking google play services pretty bad and reinstalling would not fix the problem and neither would cache clear or system.img flash. So I was just gonna try to start fresh. So, I attempted to flash 21.12 firmware and thats how I ended up here. What should I do next? Flash that SU firmware or flash the 21.12 firmware? Should I remove the bootloader and boot images from those .xml files? Thanks for your time, I should be good after that information

diabl0w said:
Okay so good news... I installed the older sdk drivers and my phone will now connect to fastboot mode again. wooo!!! Now, to make sure I do this right, @r3pwn , the link you just sent me was a superuser image, right? Background story as to why I am doing this, I have root and I ended up breaking google play services pretty bad and reinstalling would not fix the problem and neither would cache clear or system.img flash. So I was just gonna try to start fresh. So, I attempted to flash 21.12 firmware and thats how I ended up here. What should I do next? Flash that SU firmware or flash the 21.12 firmware? Should I remove the bootloader and boot images from those .xml files? Thanks for your time, I should be good after that information
Click to expand...
Click to collapse
That's not the root firmware, that's just plain stock. I would recommend you flash that image (the one I linked) then re-root.

r3pwn said:
That's not the root firmware, that's just plain stock. I would recommend you flash that image (the one I linked) then re-root.
Click to expand...
Click to collapse
I realized that after I downloaded the file and took a look at it further... thanks for your help and for bearing with me. It worked!

xt1097 at&t brick

Hello guys,
When I tried to update my Moto X for AT & T to RETAIL BR "VICTARA_RETBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml" version, now only comes into fastboot boot and says "Bad check failed for boot, downgraded version for boot, failed to validate boot image ".
Then I thought that would solve flashing with "VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml" and I found this legend now, "downgraded version for primary_gdt"
Any idea how to fix it?
Thank you in Advance.

mseverini said:
Hello guys,
When I tried to update my Moto X for AT & T to RETAIL BR "VICTARA_RETBR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml" version, now only comes into fastboot boot and says "Bad check failed for boot, downgraded version for boot, failed to validate boot image ".
Then I thought that would solve flashing with "VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml" and I found this legend now, "downgraded version for primary_gdt"
Any idea how to fix it?
Thank you in Advance.
Click to expand...
Click to collapse
Sorry but there is no solution to that error. You upgraded your bootloader and partition table to the ones from 6.0 and it is impossible to downgrade those. Do not under any circumstances take an OTA or it could cause a hard brick which is impossible for us to fix.
As far as getting your phone working, flash that firmware file you have. When you get to the errors about downgraded version, just ignore them and continue. You will need to erase cache and data to get back to 5.1. So make sure that you do:
fastboot erase cache
fastboot erase userdata
If all goes well your phone should be on 5.1 and working. But as I said before, taking an OTA now would most likely cause a permanent hard brick.
Sent from my XT1095 using Tapatalk

AGISCI said:
Sorry but there is no solution to that error. You upgraded your bootloader and partition table to the ones from 6.0 and it is impossible to downgrade those. Do not under any circumstances take an OTA or it could cause a hard brick which is impossible for us to fix.
As far as getting your phone working, flash that firmware file you have. When you get to the errors about downgraded version, just ignore them and continue. You will need to erase cache and data to get back to 5.1. So make sure that you do:
fastboot erase cache
fastboot erase userdata
If all goes well your phone should be on 5.1 and working. But as I said before, taking an OTA now would most likely cause a permanent hard brick.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
motoboot v60.16 in retailbr and att,
gpt.bin both v5.1,
when flashed retail brazil stopped in boot.img, then can´t flash gpt.bin of att version.
I don't understand what was caused the downgrade.
Thank you in advance.
Sorry for my english

mseverini said:
motoboot v60.16 in retailbr and att,
gpt.bin both v5.1,
when flashed retail brazil stopped in boot.img, then can´t flash gpt.bin of att version.
I don't understand what was caused the downgrade.
Thank you in advance.
Sorry for my english
Click to expand...
Click to collapse
I did the same thing, the problem was flash de cellphone with the bootloader locked, did you found a solution ?

At&t xt1097
I have the same problem, i flashed Brazilian XT1097 firmware on my AT&T XT1097 and i can't power on my device, please help us to flash correct firmware and bootloader

samkhara said:
I have the same problem, i flashed Brazilian XT1097 firmware on my AT&T XT1097 and i can't power on my device, please help us to flash correct firmware and bootloader
Click to expand...
Click to collapse
Which firmware did you have until the flash? you need to download the last firmware with the Stagefright patch and re-flash it.

lucasdursi said:
Which firmware did you have until the flash? you need to download the last firmware with the Stagefright patch and re-flash it.
Click to expand...
Click to collapse
I had before flash
System Version: 23.16.9.victara_att_att.en.US.att
Build namber LPE23.32-21.9
can you explain to me how can i flash correct firmware and return to stock?

samkhara said:
I had before flash
System Version: 23.16.9.victara_att_att.en.US.att
Build namber LPE23.32-21.9
can you explain to me how can i flash correct firmware and return to stock?
Click to expand...
Click to collapse
You need to re flash it with this firmware, is the last one with the Stagefright Patch: http://www.filefactory.com/file/705qta2o0wrt/VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip
Before the flash, power up you phone and put this command: fastboot oem fb_mode_clear
Then, turn it off amd be sure to power up your phone in FASTBOOT mode pressing the Power Button and Volume Down at the same time, when the phone boots, connenct it to the PC and flash it with RSD Lite like you did with the Brazilian firmware.
I hope it works! :good:

lucasdursi said:
You need to re flash it with this firmware, is the last one with the Stagefright Patch: http://www.filefactory.com/file/705qta2o0wrt/VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip
Before the flash, power up you phone and put this command: fastboot oem fb_mode_clear
Then, turn it off amd be sure to power up your phone in FASTBOOT mode pressing the Power Button and Volume Down at the same time, when the phone boots, connenct it to the PC and flash it with RSD Lite like you did with the Brazilian firmware.
I hope it works! :good:
Click to expand...
Click to collapse
I can not flash with RSD Lite , because my bootloader is locked and can't be unlocked , because it can't officially unlcok AT&T XT1097 bootloader. i try to flash my phones software but i can not power on it

samkhara said:
I can not flash with RSD Lite , because my bootloader is locked and can't be unlocked , because it can't officially unlcok AT&T XT1097 bootloader. i try to flash my phones software but i can not power on it
Click to expand...
Click to collapse
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?

lucasdursi said:
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?
Click to expand...
Click to collapse
can you send me a tutorial how can i flash it via RSD lite i can not recognize my phone via this software

samkhara said:
can you send me a tutorial how can i flash it via RSD lite i can not recognize my phone via this software
Click to expand...
Click to collapse
- Download the latest Motorola drivers for Windows: http://www.motorola.com/getmdmwin
- Download the latest firmware for your phone.
- Install drivers and RSD Lite to your PC.
- Make sure your battery at least 80% before we proceed.
- Turn off your phone and press both volume keys and power on. You'll enter bootmenu. (IMPORTANT!)
- Connect your phone to PC and your PC will detect and install the drivers automatically.
- Open RSD Lite and click ... beside filename. Browse to the firmware and double click it. A menu will popup and choose "uncompress and start flashing".

Hello
I TRY TO FLASH VIA RSD LITE , but i got error FAILED, VERSION DOWNGRADED FOR PRIMARY_GPT
CAN YOU TELL ME WHAT CAN I DO?

samkhara said:
Hello
I TRY TO FLASH VIA RSD LITE , but i got error FAILED, VERSION DOWNGRADED FOR PRIMARY_GPT
CAN YOU TELL ME WHAT CAN I DO?
Click to expand...
Click to collapse
You try with this firmware: VICTARA ATT XT1097 5 1 LPE23 32-21 9 cid1 CFC ????
Exactly, because you need the latest firmware for your phone. When you try to flash the Brazil Firmware, you already have the latest firmware, and now the flash fail because you need a new one...
A days ago, I receive a new update, you need to wait for the new firmware with this last update, and then try to flash it, be patient

lucasdursi said:
You try with this firmware: VICTARA ATT XT1097 5 1 LPE23 32-21 9 cid1 CFC ????
Exactly, because you need the latest firmware for your phone. When you try to flash the Brazil Firmware, you already have the latest firmware, and now the flash fail because you need a new one...
A days ago, I receive a new update, you need to wait for the new firmware with this last update, and then try to flash it, be patient
Click to expand...
Click to collapse
OK, where can i find this firmware ?

samkhara said:
OK, where can i find this firmware ?
Click to expand...
Click to collapse
You need to wait for the release, check this page, be patient: http://www.filefactory.com/folder/dd05c058d3ff8dbe

lucasdursi said:
You need to wait for the release, check this page, be patient: http://www.filefactory.com/folder/dd05c058d3ff8dbe
Click to expand...
Click to collapse
I have tried it and it works.
Thanks.

lucasdursi said:
Do you speak spanish ?
Yes you can! I have the same Moto X and i did it that way.
It does not matter if you have the bootloader lock, to flash with RSD you don't need to unlock the bootloader.
You actually try to flash the phone with the lastest firmware ?
Click to expand...
Click to collapse
can i unlock bootloader of moto x 2 at&t model

XT 890 Stuck on Warning Bootloader Unlocked / Fastboot and Recovery Access possible

Heya Folks,
i tried to root my XT 890.
After everything seemed to work out well, i rebooted it after setting usb debug on, and now im stuck in "Warning Bootloader Unlocked" message.
i can access fastboot and cwm recovery.
what i tried so far:
1.
fastboot flash recovery cwm.img
go to recovery
install from sideload
adb sideload RAZRiRoot2.zip
it says everything complete
when i reboot -> loop again, no boot
2. tried with RSD lite 6.1.5 to flash stock rom - keep getting error on step 7/12, it says Flashing motobp ... and then it returns after 30 secs "Fastboot command failed"
anyone any tips?
thanks,
Ras

rassle said:
Heya Folks,
i tried to root my XT 890.
After everything seemed to work out well, i rebooted it after setting usb debug on, and now im stuck in "Warning Bootloader Unlocked" message.
i can access fastboot and cwm recovery.
what i tried so far:
1.
fastboot flash recovery cwm.img
go to recovery
install from sideload
adb sideload RAZRiRoot2.zip
it says everything complete
when i reboot -> loop again, no boot
2. tried with RSD lite 6.1.5 to flash stock rom - keep getting error on step 7/12, it says Flashing motobp ... and then it returns after 30 secs "Fastboot command failed"
anyone any tips?
thanks,
Ras
Click to expand...
Click to collapse
Try to flash them manually. In the xml file of the rsd lite package u can see the commands. U will need mfastboot for this. U do use a 4.1.2 (JB) package for this?

Hazou said:
Try to flash them manually. In the xml file of the rsd lite package u can see the commands. U will need mfastboot for this. U do use a 4.1.2 (JB) package for this?
Click to expand...
Click to collapse
im actually trying with CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml which has the title of XT890_emara-user 4.1.2 9.8.2I-50_SMI-26 1358465787 release-keysSUNRISE_SMB_REV30_V2_R3_1251.B
i do have problems of finding stock roms as most links are pointing to sbf droid developers (cant post link due to beeing new) which is dead for me.
ive used shadows mirror list, but its only showing non-4.1.2 versions for me. however, im not quite sure which firmware was one the phone before *sorry*
by commands of the xml file u mean the xml file which is contained in the "firmware" downloads for the XT890?

Hazou said:
Try to flash them manually. In the xml file of the rsd lite package u can see the commands. U will need mfastboot for this. U do use a 4.1.2 (JB) package for this?
Click to expand...
Click to collapse
okay, ive been a bit impatient and bricked it with flashing 4.0.4 eu firmware. (only green LED, no fast boot no nothing)
i then used that unbrick medfield method thing posted by czechnolog, and the phone fully booted up in 4.0.4 after that ... wow that was some progress.
however, whenever i reboot the phone it says service code corrupt, but it boots fully into android - im a bit paranoid now if thats a positive or negative progress xD
i updated android with a 50 meg udpate --> success
i then tried to update again, it says its an 300 meg udpate. the phone boots, the android bot gets surgery, and it fails at around 45% - tried this 2 times
its still at 4.0.4
how do i proceed from here on? try flashing a 4.1.2? something completly different? i mean, after seeing 1 day no boot at all this "feels" like some progress - just not correct :/

rassle said:
okay, ive been a bit impatient and bricked it with flashing 4.0.4 eu firmware. (only green LED, no fast boot no nothing)
i then used that unbrick medfield method thing posted by czechnolog, and the phone fully booted up in 4.0.4 after that ... wow that was some progress.
however, whenever i reboot the phone it says service code corrupt, but it boots fully into android - im a bit paranoid now if thats a positive or negative progress xD
i updated android with a 50 meg udpate --> success
i then tried to update again, it says its an 300 meg udpate. the phone boots, the android bot gets surgery, and it fails at around 45% - tried this 2 times
its still at 4.0.4
how do i proceed from here on? try flashing a 4.1.2? something completly different? i mean, after seeing 1 day no boot at all this "feels" like some progress - just not correct :/
Click to expand...
Click to collapse
Ah u noticed why it is said many times that u never should flash 4.0.4 through rsd lite without some changes.
It is some progress. The system boots again. U most likely got JB dnx and ifwi, the part that u screw up with 4.0.4 and ICS system and boot. Next thing to try is getting the 4.1.2 firmware and flashing the parts manually. Flash the system and boot and erase the data and cache. Then flash cwm and flash supersu.
Mfastboot flash system <system_signed>
Mfastboot flash boot <boot_signed>
Mfastboot erase user data
Mfastboot erase cache
After that u should have a fully flashed 4.1.2 firmware phone. With cwm and root

Hazou said:
Ah u noticed why it is said many times that u never should flash 4.0.4 through rsd lite without some changes.
It is some progress. The system boots again. U most likely got JB dnx and ifwi, the part that u screw up with 4.0.4 and ICS system and boot. Next thing to try is getting the 4.1.2 firmware and flashing the parts manually. Flash the system and boot and erase the data and cache. Then flash cwm and flash supersu.
Mfastboot flash system <system_signed>
Mfastboot flash boot <boot_signed>
Mfastboot erase user data
Mfastboot erase cache
After that u should have a fully flashed 4.1.2 firmware phone. With cwm and root
Click to expand...
Click to collapse
ive done first 2 steps. hes not accepeting "mfastboot erase user data" - should i skip that one? **fixed, its userdata** ^.^
after erase cache -> reboot? or direct flash cwm.img?

rassle said:
ive done first 2 steps. hes not accepeting "mfastboot erase user data" - should i skip that one? **fixed, its userdata** ^.^
after erase cache -> reboot? or direct flash cwm.img?
Click to expand...
Click to collapse
okay, just flashed cwm without reboot, after that rebooted.
4.1.2 was working then...
... continued to swapping cwm vs twrp
... done a backup, saved the backup
... dled cm11 + gapps
and now im 4.4.4 which seems to run very smoothly
- the "Service Code Corrupt" Message remains, but well... its working aight?!
thanks for all the support

rassle said:
okay, just flashed cwm without reboot, after that rebooted.
4.1.2 was working then...
... continued to swapping cwm vs twrp
... done a backup, saved the backup
... dled cm11 + gapps
and now im 4.4.4 which seems to run very smoothly
- the "Service Code Corrupt" Message remains, but well... its working aight?!
thanks for all the support
Click to expand...
Click to collapse
Good that it worked. The message will remain there. I don't know how to fix that issue. But I don't think it is a huge issue, but its annoying.