Database Develop

fdisk with optimus 2x

Hello
I am trying to use fdisk to partition optimus' nand. I want to delete the last 2 partitions /dev/block/mmcblk0p9 and p8 and merge them into p8 but fdisk wont let me do it. It says "value is out of range" and gives me as default 511kb of space each logical partition by default.
If i delete all partitions till p5 and remake the extended partition everything can go ok but these include things i dont wont to touch
For your quick reference the o2x partitions.
/dev/block/mmcblk0p1 = system partition
/dev/block/mmcblk0p2 = cache partition
/dev/block/mmcblk0p3 = misc partition
/dev/block/mmcblk0p4 = unknown partition
/dev/block/mmcblk0p5 = boot partition
/dev/block/mmcblk0p6 = lgdrm partition
/dev/block/mmcblk0p7 = recovery partition
/dev/block/mmcblk0p8 = data partition
/dev/block/mmcblk0p9 = internal SD partition
How can Solve this? Any ideas?

Can someone please upload the contets Of p5 p6 p7?

P5 depends on your ROM
P6 attached
P7 you can get CWM from anywhere really

Thank you a lot rusty its very much aprisiated
Do you know anything about the original question?

No idea I'm afraid.

busybox fdisk -l /dev/block/mmcblk0
d
9
d
8
n
57537
976128
w
didn't worked btw
get notification that i got damaged sd so i removed the internal sdcard part from the vold
but still no big ass data partition xD
btw i don't know anything about fdisk i just gave it a shot

look at that... looks like our phone has 16gbs or wrong declare from fdisk?
http://forum.xda-developers.com/showpost.php?p=17001387&postcount=12
edit: apparently it was a wrong declare from my brain

Apparently the SU660 has more internal storage than the P99x, so maybe it's got the same amount really, but the P99x is set up to ignore some of it?

[Q] About the partitions

Hello.
There are 12 partitions on LGP970 v30c phone.
Partitions Name
/dev/block/mmcblk0p1 = x-loader
/dev/block/mmcblk0p2 = u-boot
/dev/block/mmcblk0p3 = boot
/dev/block/mmcblk0p4 = recovery
/dev/block/mmcblk0p5 = lgdrm
/dev/block/mmcblk0p6 = divxkey
/dev/block/mmcblk0p7 = fota
/dev/block/mmcblk0p8 = system
/dev/block/mmcblk0p9 = data
/dev/block/mmcblk0p10 = cache
/dev/block/mmcblk0p11 = nv
/dev/block/mmcblk0p12 = misc
1.does anyone know what the lgdrm, divxkey and nv partitions are used for? And how can we intepret them.
2.There are two other hardware partition mmcblk0boot0 and mmcblk0boot1. When i open them with a hex editor, its just all zeros.
What is the purpose of these two partition?
Any help would greatly be appreciated. Thank you!

Device Essential Material *** Firmware, Source Code, Root etc.***

This thread will list and link to all core device essential stuff.
PM me if there is new stuff please​
STOCK ASUS FIRMWARE
WW_epaduser_10_26_1_18_UpdateLauncher.zip: HERE
US_epaduser_10_26_1_18_UpdateLauncher.zip: HERE
CN_epaduser_10_26_1_18_UpdateLauncher.zip: HERE
TW_epaduser_10_26_1_18_UpdateLauncher.zip: HERE
Seperate Sd update for WW versions to recover from wrong released OTA, when unzipped place it on MicroSdcard and reboot:
WW_10_26_1_18_SDupdate.zip: HERE
US_epaduser_10_26_1_7_UpdateLauncher.zip: HERE
TW_epaduser_10_26_1_7_UpdateLauncher.zip: HERE
WW_epaduser_10_26_1_7_UpdateLauncher.zip: HERE
CN_epaduser_10_14_1_47_UpdateLauncher.zip: HERE
JP_epaduser_10_14_1_47_UpdateLauncher.zip: HERE
US_epaduser_10_14_1_47_UpdateLauncher.zip: HERE
WW_epaduser_10_14_1_47_UpdateLauncher.zip: HERE
WW_epaduse_10_14_1_45_UpdateLauncher.zip: HERE
TW_epaduse_10_14_1_45_UpdateLauncher.zip: HERE
US_epaduse_10_14_1_45_UpdateLauncher.zip: HERE
CN_epaduse_10_14_1_45_UpdateLauncher.zip: HERE
CN_epaduser_10_14_1_42_UpdateLauncher.zip: HERE
How to flash:
Step 1: Download and unzip the zipfile of your choice.
Step 2: Copy the new Zipfile and paste it in root directory of your internal SdCard, then reboot the device and the update will automatically start.
ASUS SOURCE CODE
kernel_10_14_1_42.rar: HERE
kernel_10_14_1_45.rar: HERE
kernel_10_14_1_47.rar: HERE
kernel_10_26_1_7.rar: HERE
kernel_10_26_1_18.rar: HERE
UNLOCK YOUR DEVICE
0820-0954_SIGNED_UnLock_for_TF701_repart.apk: HERE
How to unlock:
- Download the Asus unlock app
- Install and run the app. This will require a valid google account (if you use one time passwords, you'll need to generate one for this purpose) and internet access.
- When booting with [vol-] + [power] pressed, the transformer will show the message "The device is unlocked"
ROOT TOOLS
Read here: http://forum.xda-developers.com/showthread.php?t=2516215
CUSTOM RECOVERY
Altered CWM Recovery V6.0.3.7. for 4.2.2.*: HERE
ATTENTION: you must have an unlocked bootloader
How to flash this:
- reboot device into fastboot mode:
- adb reboot bootloader
- now flash the recovery using : fastboot flash recovery CWMrecovery4.2.2.img [where CWMrecovery4.2.2.img is the name of the file image you downloaded]
There is at the moment no CWM-Recovery or TWRP-Recovery for 4.3. version yet!!!
* With thanks to Drgravy for his work on that.
CUSTOM ROM'S
None available yet.
Will be released by Sbdags when there is a custom recovery for 4.3. available.
THEMES
Non available yet
BOOTANIMATIONS
Non available yet
OTHER MOD'S
None available yet
PARTITION INFORMATION**
Code:
name device mountpoint fs description
/dev/block/platform/sdhci-tegra.3/ADF /dev/block/mmcblk0p7 /ADF ext4 ?
/dev/block/platform/sdhci-tegra.3/APD /dev/block/mmcblk0p6 /APD ext4 ASUS Product Demo
/dev/block/platform/sdhci-tegra.3/APP /dev/block/mmcblk0p4 /system ext4 Android OS
/dev/block/platform/sdhci-tegra.3/CAC /dev/block/mmcblk0p5 /cache ext4 recovery logs
/dev/block/platform/sdhci-tegra.3/CRA /dev/block/mmcblk0p11 ?
/dev/block/platform/sdhci-tegra.3/DTB /dev/block/mmcblk0p2 ?
/dev/block/platform/sdhci-tegra.3/EKS /dev/block/mmcblk0p13 NVEKSP
/dev/block/platform/sdhci-tegra.3/LNX /dev/block/mmcblk0p3 Linux kernel (8388608 b)
/dev/block/platform/sdhci-tegra.3/MDA /dev/block/mmcblk0p12 ?
/dev/block/platform/sdhci-tegra.3/MSC /dev/block/mmcblk0p8 empty (misc, bootloader etc.)
/dev/block/platform/sdhci-tegra.3/PER /dev/block/mmcblk0p10 /persist ext4 config/calibration data
/dev/block/platform/sdhci-tegra.3/SOS /dev/block/mmcblk0p1 Recovery kernel (8388608 b)
/dev/block/platform/sdhci-tegra.3/UDA /dev/block/mmcblk0p14 /data ext4 Android user data
/dev/block/platform/sdhci-tegra.3/USP /dev/block/mmcblk0p9 Staging (blob)
RECOVERY.FSTAB**
Code:
/dev/block/platform/sdhci-tegra.3/by-name/APP /system ext4 ro wait
/dev/block/platform/sdhci-tegra.3/by-name/CAC /cache ext4 noatime,nosuid,nodev,nomblk_io_submit,errors=panic wait
/dev/block/platform/sdhci-tegra.3/by-name/UDA /data ext4 noatime,nosuid,nodev,nomblk_io_submit,errors=panic wait,encryptable=/dev/block/platform/sdhci-tegra.3/by-name/MDA
/dev/block/platform/sdhci-tegra.3/by-name/MSC /misc emmc defaults defaults
/dev/block/platform/sdhci-tegra.3/by-name/LNX /boot emmc defaults defaults
/dev/block/platform/sdhci-tegra.3/by-name/SOS /recovery emmc defaults defaults
/dev/block/platform/sdhci-tegra.3/by-name/USP /staging emmc defaults defaults
/devices/platform/sdhci-tegra.2/mmc_host/mmc1 /storage/sdcard1 vfat default voldmanaged=sdcard:auto
/devices/platform/tegra-ehci.0 /mnt/usbdrive vfat default voldmanaged=usbdrive:auto
BLOB**
Code:
name size description status
10.14.1.47: [ATTACH]2435244[/ATTACH]
blob.BCT 8,192 Bytes Boot Config Table (original) [ATTACH]2435246[/ATTACH]
blob.BC1 8,192 Bytes ? (original) [ATTACH]2435245[/ATTACH]
blob.EBT 1,396,736 Bytes Bootloader (original) [ATTACH]2435247[/ATTACH]
blob.PT 2,202 Bytes Partition Table (original) [ATTACH]2435248[/ATTACH]
10.26.1.7: [ATTACH]2435238[/ATTACH]
blob.BCT 8,192 Bytes Boot Config Table (unchanged) [ATTACH]2435241[/ATTACH]
blob.BC1 8,192 Bytes ? (changed) [ATTACH]2435240[/ATTACH]
blob.EBT 1,421,312 Bytes Bootloader (changed) [ATTACH]2435242[/ATTACH]
**= Thanks to Ipdunwell for sharing this info
HOW TO UNBRICK YOUR DEVICE
Read here: http://forum.xda-developers.com/showpost.php?p=47933481&postcount=1
ATTENTION​
YOUR WARRANTY COULD BE VOID DUE TO ROOTING AND UNLOCKING YOUR DEVICE (depending of which country you reside)
I am NOT responsible for bricked devices, dead SD cards or dead docks.
Please do some research if you have any concerns about the files here BEFORE flashing anything!
When you have no clue what we are talking about here you better leave your hands off it!!
YOU are choosing yourself freely to use these file(s) all by yourself!!!​

Odd that you just started this thread and it's outdated ;P
Updated Recovery for 4.3 with working "external" SD card, found here
http://forum.xda-developers.com/showthread.php?t=2621051
Custom Rom's
Cromi-x
http://forum.xda-developers.com/showthread.php?t=2608129
CM11 -Preview (Unofficial)
http://forum.xda-developers.com/showthread.php?t=2621028

Sorry folks. Thread closed as it already exists in the General Forum.
MD

Can't use sdcard0 with cwm-6.0.4.7 on mini2

Hi,
i'm a new user and I can't add post to correct thread so I try to begin a new thread here.
I installed cwm 6.0.4.7-jena on my phone and all install process is been completed correctly but on reboot from cwn shell / menu I can't mount sdcard0.
This error from recovery.log file:
Code:
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
I:Volume /storage/sdcard0 is not idle, current state is 2
Error mounting /storage/sdcard0!
File recovery.fstab it seems correct:
Code:
# cat /etc//recovery.fstab
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/mmcblk0p8 /boot emmc defaults defaults
/dev/block/mmcblk0p12 /recovery emmc defaults defaults
/dev/block/mmcblk0p16 /system ext4 ro,barrier=1 wait
/dev/block/mmcblk0p18 /data ext4 nosuid,nodev,noauto_da_alloc,barrier=1 wait,check,encryptable=footer,length=-16384
/dev/block/mmcblk0p17 /cache ext4 nosuid,nodev,barrier=1 wait,check
# vold managed volumes
/devices/platform/msm_sdcc.3/mmc_host auto vfat defaults voldmanaged=sdcard0:23,noemulatedsd,nonremovable
/devices/platform/msm_sdcc.1/mmc_host auto auto defaults voldmanaged=sdcard1:auto,noemulatedsd
/devices/platform/msm_hsusb_host.0 auto auto defaults voldmanaged=usbdisk:auto
# zRam (zramsize = 64 megabytes)
/dev/block/zram0 none swap defaults zramsize=67108864
If I use last OmniROM I see that sdcard0 is not usable and this confirm like for cwn that cwn-6.0.4.7 that there is a problem with sdcard0 (internal)
But If I use last cm-10.1 sdcard0 is correctly usable sdcard yet if on cwn it isn't possible mount it.
So probably is there a bug on cwm-6.0.4.7 and omni-4.4.2-20140202-jenad-HOMEMADE.
Could be relative to a wrong partition data ? I try to format it from cwm but I receive error and I can't donwgrade to previous cwm-6.0.3.2 (that it works with sdcard0) because there is a check on status of the sdcard0.
Any suggestions ?
Thanks in advance

Recover data from galaxy s plus with broken screen

Hello, I have a samsung galxy s plus with cm11 and a broken screen and i want to recover data from internal storage
when the phone is on i cannot access adb
in recovery i can use adb shell but don't know how to mount the internal storage.
I've tried several ways to mount but didn't work
here is my fstab
Code:
/dev/block/mmcblk0p16 /cache ext4 rw
/dev/block/mmcblk0p17 /data ext4 rw
/dev/block/mmcblk0p15 /system ext4 rw
and recovery.fstab
Code:
# Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
/dev/block/mmcblk0p8 /boot emmc defaults recoveryonly
/dev/block/mmcblk0p13 /recovery emmc defaults recoveryonly
/dev/block/mmcblk0p15 /system ext4 ro,errors=panic wait
/dev/block/mmcblk0p16 /cache ext4 nosuid,nodev,barrier=1 wait,check
/dev/block/mmcblk0p17 /data ext4 nosuid,nodev,noatime,noauto_da_alloc,journal_async_commit,errors=panic wait,check,encryptable=footer,length=-16384
/devices/platform/msm_sdcc.2/mmc_host/mmc1 /storage/sdcard0 vfat defaults voldmanaged=sdcard0:28,nonremovable
/devices/platform/msm_sdcc.4/mmc_host/mmc2 /storage/sdcard1 vfat defaults voldmanaged=sdcard1:auto
/devices/platform/msm_hsusb_host.0 /storage/usbdisk auto defaults voldmanaged=usbdisk:auto
can anyone help?

Google Android commander. Turn your phone on and use that to get all your files.
Sent from my SM-N900T using Tapatalk

the problem is i've modified build.prop to try to enable MTP instead of UMS but now i have boot loop (it vibrates) and even after pushing the backup of build.prop on the phone, the phone still doesn't boot. I can only use the recovery.

anyone?, Im sure there is a way but I just can't find one