Csc = olbjpe - Galaxy Tab Q&A, Help & Troubleshooting

First of all, I've tried to search first but comes with no suitable answer..
My problem is..
I have a GT-P1000 with XSE csc code before.
So since I've been waiting so long for Gingerbread updates, I've come through an update from Italy. So I grabbed that right away.
The last 1 month has been ok, but since there is an update for my country specific, I want to use that update instead.
...long story short...
I tried to flash back to my older Froyo ROM which is P1000DXJK2
Grabbed both the pit and tar and voila, my SGT is back to froyo
I then tried to connect it to Kies but it can't see any firmwares update (heck it can't even see my SGT firmware now)
I tried *#1234# and found out that there is nothing on PDA and CSC
The SGT is working OK, but I still want the specific update for my country..
So my questions are..
1. Where should I find CSC files or PDA files suitable for my Froyo OS? So that KIES able to recognize it and download the GingerBread update?
2. I also want to update to P1000DXJPE but from my latest experience downgrading from XXJQ1 to P1000DXJK2 .. I was a little bit affraid
Any helps will be appreciated. And if someone already has questioned this before, please, point me toward the thread.. Perhaps I wasn't paying attention when searching before.

tgrdrgrss said:
First of all, I've tried to search first but comes with no suitable answer..
My problem is..
I have a GT-P1000 with XSE csc code before.
So since I've been waiting so long for Gingerbread updates, I've come through an update from Italy. So I grabbed that right away.
The last 1 month has been ok, but since there is an update for my country specific, I want to use that update instead.
...long story short...
I tried to flash back to my older Froyo ROM which is P1000DXJK2
Grabbed both the pit and tar and voila, my SGT is back to froyo
I then tried to connect it to Kies but it can't see any firmwares update (heck it can't even see my SGT firmware now)
I tried *#1234# and found out that there is nothing on PDA and CSC
The SGT is working OK, but I still want the specific update for my country..
So my questions are..
1. Where should I find CSC files or PDA files suitable for my Froyo OS? So that KIES able to recognize it and download the GingerBread update?
2. I also want to update to P1000DXJPE but from my latest experience downgrading from XXJQ1 to P1000DXJK2 .. I was a little bit affraid
Any helps will be appreciated. And if someone already has questioned this before, please, point me toward the thread.. Perhaps I wasn't paying attention when searching before.
Click to expand...
Click to collapse
have you tried reflashing jk2 again?

Related

[Q] Which firmware do I get please? just alittle help

Hi guys,
I have used Odin once before when I broke my phone, i have version I9000XXJPK
Can someone please tell me the version i need to download so that i have official 2.2 for UK spec?
There are so many numbers etc im getting lost off.
I have been on samfirmware and I just cant decide which version i need to be official.
My phone currently cant send SMS and ive read thats because of something wrong with the custom FW i have on. (it was like this when i bought it from the shop second hand)
Thanks
vinny1684 said:
Hi guys,
I have used Odin once before when I broke my phone, i have version I9000XXJPK
Can someone please tell me the version i need to download so that i have official 2.2 for UK spec?
There are so many numbers etc im getting lost off.
I have been on samfirmware and I just cant decide which version i need to be official.
My phone currently cant send SMS and ive read thats because of something wrong with the custom FW i have on. (it was like this when i bought it from the shop second hand)
Thanks
Click to expand...
Click to collapse
Hey there. It can be a bit confusing, but follow the notes on samfirmware and you should be fine. I upgraded from T-Mobile UK's stock firmware (I forget which version) to JPA, via JM4.
I am using JPA now (again, not sure which provider this is, but it seems to be fairly stock), with no problems.
Make sure you check the notes for each ROM (ie, some have an upgrade path, and some do not). You may need to use a different PIT file and partition accordingly.
Hope this helps.
Thanks mate,
All the release dates are old on Samfirmware, the official froyo for the uk wasnt released until November. the latest firmware on samfirmware is October....
Im really confused how i get from my FW to an official newest froyo. Kies wont work for me at all, tried 3 computers now.
Seriously, screw Kies. It wouldn't upgrade my unit (obviously as there was no provider firmware available), so I patched it with the util posted here and it flashed to about 50% then failed, thus bricking my phone in the process.
If you're not bothered about your provider bloaty junk that ships with the phone, you may as well just bite the bullet and flash JPA or JP0 via Odin. I doubt these are UK specific ROMs (as you mention, Froyo was slated for Nov here in the UK) as samfirmware's are all dated Oct 10, but my phone seems just fine- been using it for around 2 weeks now with no hitches.
Best of luck!
How about installing Doc Froyo custom rom?
It is using froyo 2.2
http://forum.xda-developers.com/showthread.php?t=817703

Upgrading an I9000T to 2.2?

I got one of the Brazil/LatinAmerica I9000T phones running in the US/AT&T 3G:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
Im concerned that upgrading may screw up my radio files. My phone has the 3 US/AT&T 3G bands 850/1900/200 that most of the I9000s dont. Can I just upgrade the PDA to a 2.2 ROM and leave the PHONE/CSC as is? If so can I upgrade that PDA to ANY ROM?
Im also concerned that since I have the latin american phone with brazil firmware on it, and it says on bootup that its a I9000T but its not the I9000B model that the MUST READ describes as a brazil model... So Im not sure what all pit files and ROMs that are safe to use.
Optimally, when I do upgrade to 2.2, should I try to use a MODEM and CSC file from the US/AT&T/Captivate 2.2 files, and use whatever PDA ROM I choose? That seems in my head to be what to shoot for but I'm still figuring things out here...
Also, Im confused... these ROMs Im seeing are installed via update.zip, not by the ODIN method. Will I screw up my phone by installing these update.zip files?
Is there a free method to totally back up my PDA/PHONE/CSC into individual files that could be restored later?
Hello Friend.
I have the same version of phone, and I´m looking to for "original" firmware.
You've got the original firmware?
Did you guys found a solution for.. i also have the same version...
Hello everybody
Have you guys loked here?
http://forum.xda-developers.com/showthread.php?t=907701
I downgraded to 2.1 with the i9000T stock rom
Now that 2.2.1 is out for the i9000HKTTTT (i9000TUBJP9), I wanted to see if KIES would now work. After downgrading to 2.1update 1 using ODIN ,everything appears work fine on the phone. I tried updating to 2.2.1 via KIES and still get the message "This Device's version can't be upgraded" . I tried this on a few different computers with KIES 1.5 & 2.0 and no luck.
I did do a Factory reset *2767*3855# , but still no luck.
All information on the phone appears to be OK for 2.1 update 1.
I did notice in Kies if you apply the Registry Patcher and use code CWW, you will get a different message which shows that it's currently up to date. Maybe meaning, Jamaica has not received their updates yet.
Any ideas. Very frustrating. Just trying to get this phone back to stock so it can receive updates when I give to another family member.
GT-i9003
By any chance any one have a link for the latin America Stock rom for the I9003... I write in this tread since is the closer one I found about LatinAmerican Roms.
It sims there are only Europeans, Asians, Arabic and the US rom.
I installed every one and each of them. the signal was fading in and out, and I was only getting edge.
so any one with the I9003 Latin america Stock Rom?

[Q] Debranding SGS and updating to 2.2

Hi guys.
I just got a SGS yesterday as my HTC Desire was stolen last week.
The one I got is a German T-Mobile branded phone (has customised boot and shutdown logo) and I really wan't to get rid of the branding and all those useless apps on it. I live in Denmark so i have no use for T-Mobiles apps that don't work here.
Now i have been reading a lot yesterday on these forums and reading lots of guides but I'm still unsure what route to go. Currently the phone is running 2.1 and I wan't to upgrade to 2.2 or 2.2.1 but unbranded, and then root the phone a bit later and probably move to Darky's Gingerbread edition ROM.
From what i can gather there are 2 methods to do this, but I can't really find out witch one would be right for debranding.
1. Using KIES registry pattcher and change my product code to XEE (Nordics) and try that to flash it to official 2.2 and root that.
2. Using this [HOWTO] manually flash Samsung Galaxy S with JPY firmware ** WORKS **
If anyone can point me in the right direction that would be awesome.
[EDIT] Forgot to mention that i can boot the phone in both download mode and recovery mode holding the 3 buttons, so no need to fix that first.
Information on my phone:
Product code from KIES registry:GT-I9000HKDDTM
*#1234#
PDA: I9000BOJG3
PHONE: I9000BOJF1
CSC: I9000GDTMJH2
Build number:​ECLAIR.BOJG3
Firmware revision:​2.1-update1
Baseband:​I9000BOJF1
Kernel version:​[email protected] #2
1. Using KIES registry pattcher and change my product code to XEE (Nordics) and try that to flash it to official 2.2 and root that.
Thats the way to go but you would be best to safe a copy of the current ROM for warranty purposes as you would need to flash it back to make a claim .
Flashing via Odin only if you cannot use method 1 .
jje
Ok, thanks.
But how do I make a backup of the current rom? There is no download for it at far as i can tell.
Get Backup from Samfirmware.com
Go to Samfirmware.com click on Firmware then go to Firmware Section. Select then Android and then Galaxy S GT-I9000. Then download the I9000XWJG3 firmware.
Done
blockbusta said:
Go to Samfirmware.com click on Firmware then go to Firmware Section. Select then Android and then Galaxy S GT-I9000. Then download the I9000XWJG3 firmware.
Done
Click to expand...
Click to collapse
But XWJG3 is not a T-Mobile branded firmware is it? If it is nothing on these guides makes any sense.
Btw I did find a I9000BOJG3.rar file on some download page, downloaded and it does contain the following files that match my current versions. I have no idea if it's a working flash but if it is I would be able to flash thsi from odin to return to stock right?
I9000BOJG3.rar file contains:
CODE_I9000BOJG3.tar.md5
CSC_I9000GDTMJH2.tar.md5
MODEM_I9000BOJF1.tar.md5
Oh my Fault. I tought that only the ending is important (Like if the ending is JP7 than it's a Vodafone Firmware and if the ending is JG3 it's a T-Mobile
But XWJG3 is not a T-Mobile branded firmware is it? If it is nothing on these guides makes any sense
You get branded firmware from the network operator .
All firmware on these pages is non branded .
Again my suggestion is to use Kies registry patcher and spoof the update to whatever you want .
jje
I'm also trying to debrand my SGS and get Froyo, but I'd also like to make a backup of my original ROM. However, my ROM isn't available in samfirmware.com. It's I9000BVJJI1 and I want to update to I9000BVJJPD, which one of my friends has and probably is the same hardware.
Is there any way to backup my original ROM?
Your rom and every network rom comes from the network Sam is generic base roms .
Back up = Clockwork Mod Recovery to save the rom .
May i repeat if you dont know what you are doing then dont this forum is littered with broken phones belong to newbies who have not bothered to read and understand and now need to take the phone back to Samsung for repair with non valid firmware that has invalidated the warranty .
jje
Just did the update via KIES using the patcher and everything went smooth.
Saved the new firmware during flashing and a factory reset after the flash as i had basically nothing on the phone yet.
Right now I'm on 2.2
PDA: I9000XWJPA
PHONE: I9000XXJPP
CSC: I9000XEEJP4
Not rooted yet, but I'm gonna do that tomorrow probably.

[Q] Still can't get stock fw on properly

Hi if someone can help id really apprteciate it. Dunno why this is confusing me so much.
Anyway I want to put stock uk firmware on my galaxy s so I can sell. Pretty sure it was the unlocked stock firmware.
I tried doing the reg hack on kies - it finds update and then says device version wrong.
I tried using spooffw - for some reason it updates the pda ok but doesnt update phone/csc (click ok and it reverts back to whatever it was on before)
I tried installing JM1 from samfirmwares and whent into kies and again says cannot update on this device.
Can anyone tell me what I need to flash onto this bloody phone so I can get kies to upgrade to the oficial fw.
I would like to put on a 2.1 rom and then have kies upgrade then I know its stock. I downloaded jf3 but that didnt come with phone or csc ? where would I get them?
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
taha_e said:
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
Click to expand...
Click to collapse
Hi flashing a rom isn't the problem but flashing a rom that makes my i9000 appear un tainted by custom roms etc is where I'm having the difficulty. I wanted to do the final update via kies then I would know that kies thinks my phone has genuine firmware. If it wont update via kies then this is a clear message that the phone has been tampered with and I may not get the money from the company.
JJEgan said:
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
Click to expand...
Click to collapse
You are right I want original firmware. Main problem is I have no idea what this would have been. I didn't make a copy as my first upgrade involved doing a kies reg hack before there were any custom roms and I stupidly didn't take note of what I was currently on. What I do know is that my phone has never had any operator logos or software on it. (unlike my gs2)
I have tried doing the reg hack on kies 2.0 but apparently thats not properly supported yet (can I use an older kies 1.5 or something? or will it ask to be upgraded?)
I have tried using spooffw but step 3 (where you set phone and csc) doesnt work, when you press ok is reverts back to whatever it had on before no matter the value you enter.
Does anyone know of an o2 stock firmware that has been uploaded somewhere? ideally with pit, csc modem and pda. then I can hopefully use odin and then confirm that all is ok in kies?
Or if I am going to go the spoof route (probably with kies 1.5 as 2 is not playing ball) does anyone know what values I should use for each?
Thanks
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
azzledazzle said:
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
Click to expand...
Click to collapse
jpy? so is that a firmware you could actually get on a device brought in uk? which specific download should I choose? Once downloaded and flashed if I connect to kies will it be able to do future updates?
EDIT woohoo I did as you said and used UK JPY found here
http://www.multiupload.com/PZNPALHVDW
and its now being picked up in kies saying latest firmware installed. Excellent now I can sell it without worrying.
bit sad it was definately the best phone ive owned and there still doesnt seem to be much out there that can push it to its limits (let alone the s2) still the extra screen size and better pixel layout are definately worth the upgrade.
Thanks everyone for your help.
If thats not it i uploaded O2 JPY within the last month linked in two posts .Dont know where though .Its probably mine on Sammy anyway .
Flashed direct as PDA via Odin . If problems after with modem . Unzip file extract modem flash file again as PDA and also the modem file is what i did .
jje

[Q] Froyo 2.2.1 bootloader, PDA and CSC

Firstly I'll apologise if this question has been posted already, but being a little bit of a noob when it comes to firmware codes I thought I'd ask in a clean thread.
I downloaded the Froyo 2.2.1 XXJPY stock firmware from samfirmware.com, but I noticed that it didn't come with the froyo bootloader, modem or CSC tars to return it to true stock (im looking to downgrade from the XXJVK 2.3.3 that was released on here).
Could someone please point me in the right direction to finding these so that I can return my phone to true stock?
Thanks in advance for any help
Not sure what you mean by True Stock all the samfirmware is true .
Unless you mean original branded firmware .
You would need to have saved that in the first instance .
Samfirmware instructions are for a single file to flash as PDA .
Why do you want to change Modem and CSC in that file ???
jje
It's just that I noticed when using Kies to see if it would recognise in there that it was still using the XXJVK (KOR) modem etc. rather than moving it all back to XXJPY for everything.
This is more to try to get kies to recognise it and get the official kies update for GB (if it's out) from 3 UK without using the registry hack (which I believe is no longer working?)
Kies will not recognize . The hardware ID the Product Code will not match anything on the server .
Spoof FW is your best bet .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Ok that's great, thanks for that

Categories

Resources