Related
I'm currently running phiremod nook V3 found here(followed the instructions too):
http://forum.xda-developers.com/showthread.php?t=954902
I'm trying to get the OC kernal installed but can't get adb to recognize my nook. I'm guessing this might have to do with me not hooking my nook up to install the correct drivers.
Can I use this guide to get my internal partition back to stock software?
http://forum.xda-developers.com/showthread.php?t=949699&highlight=adb
Thanks for helping a NC noob out.
Does your Nook boot at all? Or does it just stay on a black screen?
http://webchat.freenode.net/
channel #nookcolor
Go there for help.
Thanks for the quick responses. Im currently still running phiremod. No problems with it yet. Just flashed the app fix.
I more curious if I went by those steps I mentioned above if I could get back to stock.
Sent from my NookColor using XDA App
Yes, they would work, burning an SD card, and copying the 1.0.1 (or whichever version you want to restore to) zip file to the SD card, and flashing that.
As for the OC kernel, Dalingrin has a .zip file that you flash from Clockwork just like how you installed phiremod. You'd want the one that is for CM7.
claudius753 said:
Yes, they would work, burning an SD card, and copying the 1.0.1 (or whichever version you want to restore to) zip file to the SD card, and flashing that.
As for the OC kernel, Dalingrin has a .zip file that you flash from Clockwork just like how you installed phiremod. You'd want the one that is for CM7.
Click to expand...
Click to collapse
Can you help me out with a link to that zip? I'm searching through all 56 pages and haven't had much luck haha. Only if you have the time. Thanks.
Here ya go
http://forum.xda-developers.com/showthread.php?t=925451
claudius753 said:
Here ya go
http://forum.xda-developers.com/showthread.php?t=925451
Click to expand...
Click to collapse
So I was looking at the right thing. D'OH!
So from my reformatted SD card I'll download this to root of SD with CWR
-Froyo and CM7 Only
DOWNLOADS:
eMMC:
Froyo and CM7 (eMMC installations only) CWM update: http://www.multiupload.com/IJK50K41GG
Power NC on
Install from SD
Select file and install
Remove SD
Reboot?
EDIT: Do I unzip that file or leave it as is?
Many thanks.
Do not unzip. Copy that zip onto your SD card that has CWM burned to it. The actual process of flashing it takes only a few seconds, not as long as flashing the whole ROM takes.
Got it! Thanks again for clearing things up for me. Things are a little different than my dx.
Sent from my NookColor using XDA App
I install CWM and CM 10.1 on native emmc as verygreen's instruction here: http://forum.xda-developers.com/showthread.php?t=2263553
My fault is that i formatted /emmc , /bootdata, /factory partition and now it just boot to CWM only, even i try to instal CM 10.1 many times. Can someone help me out of this? Thank you so much.
ndttung8487 said:
I install CWM and CM 10.1 on native emmc as verygreen's instruction here: http://forum.xda-developers.com/showthread.php?t=2263553
My fault is that i formatted /emmc , /bootdata, /factory partition and now it just boot to CWM only, even i try to instal CM 10.1 many times. Can someone help me out of this? Thank you so much.
Click to expand...
Click to collapse
You messed up. Formatting /rom and /factory bricked your device. It needs those there to be able to boot normally. I'm not sure if it can be repaired. Ordinarily it can repair itself with stock recovery, but you replaced stock recovery with CWM and it needs /factory to to it.
I think you are hosed.
You might be able to boot to CM on SD someday, but not without significant manual repair first.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You messed up. Formatting /rom and /factory bricked your device. It needs those there to be able to boot normally. I'm not sure if it can be repaired. Ordinarily it can repair itself with stock recovery, but you replaced stock recovery with CWM and it needs /factory to to it.
I think you are hosed.
You might be able to boot to CM on SD someday, but not without significant manual repair first.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thank you so much leapinlar
This device is my present from relation live in us. but i'm half way of the earth from them!!
So, beside using SDCard boot, can you help me to find stock recovery? Thank you so much!
Try this link:
http://d-h.st/k0O
and flash it with CWM. It will put stock recovery back on emmc, but without /factory, it still cannot repair itself without more work.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Try this link:
and flash it with CWM. It will put stock recovery back on emmc, but without /factory, it still cannot repair itself without more work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
so from now on my device just can boot from sdcard only? thank you so much for your help leapinlar.
Can you help me fix this?
ndttung8487 said:
so from now on my device just can boot from sdcard only? thank you so much for your help leapinlar.
Can you help me fix this?
Click to expand...
Click to collapse
No, you might be able to still boot on emmc.
But you need to PM me with your serial number so I can make you a repair zip to flash. Don't flash that stock recovery yet. Try my zip first.
Edit: It is after 11pm here now so if you PM me with the serial number, I will send you a link in the morning.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No, you might be able to still boot on emmc.
But you need to PM me with your serial number so I can make you a repair zip to flash. Don't flash that stock recovery yet. Try my zip first.
Edit: It is after 11pm here now so if you PM me with the serial number, I will send you a link in the morning.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
yes, here is 1'40pm, i still at work, i'll post sn when i get home, thanks again for your help leapinlar!
EDIT:I got this SN on the box: 302.476.029.722.4301
I have a same kind problem
I also formatted /bootdata /system /cache /data /emmc at mounts and storage menu in cwm recovery. now I see my nook boot with "nook"charcter. finally finished with"install failed"
So I try to restored with backup files of cwm backup. but still failed.
I live in S.Korea. Please help me
ndttung8487 said:
yes, here is 1'40pm, i still at work, i'll post sn when i get home, thanks again for your help leapinlar!
EDIT:I got this SN on the box: 302.476.029.722.4301
Click to expand...
Click to collapse
I just sent you a Private Message (PM) with a link for a customized repair zip. Flash that. Then try rebooting, it should boot to CM10.1 unless you wiped it out too. If you did, reflash the CM10.1 zip too.
And go to verygreen's thread and flash his newest emmc CWM (v2). It removes the ability to format /rom and /factory.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 07:49 AM ---------- Previous post was at 07:36 AM ----------
[email protected] said:
I also formatted /bootdata /system /cache /data /emmc at mounts and storage menu in cwm recovery. now I see my nook boot with "nook"charcter. finally finished with"install failed"
So I try to restored with backup files of cwm backup. but still failed.
I live in S.Korea. Please help me
Click to expand...
Click to collapse
You do not have the same issue as the prior user since you did not format /rom and /factory.
You tried to restore a stock backup you had made prior to formatting those partitions? That should have fixed it.
Try flashing my plain 2.1.0 stock zip linked in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I just sent you a Private Message (PM) with a link for a customized repair zip. Flash that. Then try rebooting, it should boot to CM10.1 unless you wiped it out too. If you did, reflash the CM10.1 zip too.
And go to verygreen's thread and flash his newest emmc CWM (v2). It removes the ability to format /rom and /factory.
Sent from my Nook HD+ running CM10.1 on emmc.
---------- Post added at 07:49 AM ---------- Previous post was at 07:36 AM ----------
You do not have the same issue as the prior user since you did not format /rom and /factory.
You tried to restore a stock backup you had made prior to formatting those partitions? That should have fixed it.
Try flashing my plain 2.1.0 stock zip linked in my HD/HD+ CWM thread linked in my signature.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I had no luck, as my step is:
- Put your file, CM10.1 emmc and gapps to sdcard, and insert to nook hd+ then power on, after it boot to cwm, i try to mount sdcard and install your file 2 times
- After install, i install again CM10.1 emmc of verygreen and gapps to, then reboot, it still go to CWM.
Any solutions leapinlar? Thank you very much
ndttung8487 said:
I had no luck, as my step is:
- Put your file, CM10.1 emmc and gapps to sdcard, and insert to nook hd+ then power on, after it boot to cwm, i try to mount sdcard and install your file 2 times
- After install, i install again CM10.1 emmc of verygreen and gapps to, then reboot, it still go to CWM.
Any solutions leapinlar? Thank you very much
Click to expand...
Click to collapse
You have not even downloaded my file, how could you have flashed it? Look in Private Messages.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You have not even downloaded my file, how could you have flashed it? Look in Private Messages.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Yes! I've downloaded already! and put it in my sdcard! from link you gave me in pm
ndttung8487 said:
Yes! I've downloaded already! and put it in my sdcard! from link you gave me in pm
Click to expand...
Click to collapse
What is the title of the file you downloaded? And did it flash successfully?
Edit: I got your PM. That is the right file. Did it flash successfully? And you are taking out the SD when you boot, right?
Edit2: ok, lets use the forum now rather than PM. Flash that first zip that puts stock recovery back on and boot without any SD in.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
What is the title of the file you downloaded? And did it flash successfully?
Edit: I got your PM. That is the right file. Did it flash successfully? And you are taking out the SD when you boot, right?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I used CWM that I already installed before in device, SD card i use just my normal SD card, not bootable SD card.
ndttung8487 said:
I used CWM that I already installed before in device, SD card i use just my normal SD card, not bootable SD card.
Click to expand...
Click to collapse
Ok, I found the problem in my zip. I will make you a new one and post link in PM.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Ok, I found the problem in my zip. I will make you a new one and post link in PM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thank you leapinlar! So i will postpone flash stock recovery and wait for you
After all, I proud to say that my device back to life! Million thanks to leapinlar! You're genius!
I will more careful with these faulty and continue enjoy my HD+,
Again, leapinlar! You save my life! Thank you very much!!!!! So happy now
BTW, I live in vietnam! Nice to meet you.
ndttung8487 said:
After all, I proud to say that my device back to life! Million thanks to leapinlar! You're genius!
I will more careful with these faulty and continue enjoy my HD+,
Again, leapinlar! You save my life! Thank you very much!!!!! So happy now
BTW, I live in vietnam! Nice to meet you.
Click to expand...
Click to collapse
Greetings from USA. You're welcome.
Sent from my Nook HD+ running CM10.1 on emmc.
congraturation ndttung8487 . but my nook still can't boot
I also install CWM emmc and CM 10.1 on native emmc after wipe date.....etc so nook unstable.therefore I formatted every single partitions(ex: bootdata.....emmc) and reflashing cm 10.1 on emmc.and cwm emmc. I had saw boot as ndttung8487 situation once but I did more work....(can't remember) maybe I flashed 2.0.0 stock.zip by sdcard. and maybe I removed emmc recovery. so my nook condition is differrent from ndttung8487.
leapinlar. I already flashing 2.1.0 plain stock zip as you wrote but it still can't boot
I sent PM to you again. please read and please save nook
----------------------------------------------------------
I just junior member first day. so I can't add reply continually. forgive this
please read my mail again I sent mail again(I wrote it behaves when booting) few minutes ago
I formatted every partition. /bootdata /system /cache /data /emmc. I was dumb
[email protected] said:
I also install CWM and CM 10.1 on native emmc after wipe date.....etc I had saw boot as ndttung8487 situation but i did more work....(cant't remember) but my nook condition is differrent from ndttung8487.
already flashing 2.1.0 plain stock zip. but can't boot
Click to expand...
Click to collapse
Explain more what you wiped, and how it behaves when booting.
Sent from my Nook HD+ running CM10.1 on emmc.
Hi,
Can't post in development thread as new here. I successfully flashed the cm 10.2 nightly /(3rd sept) to my nook hd emmc but when trying to flash leapinlar`s sd swap for cm 10.1-10.2 it errors in cwm saying product ovation where's the HD is hummingbird? There's only one file for both devices HD and HD plus can anyone help with this?
Cheers,
Hugest
hugest_uk said:
Hi,
Can't post in development thread as new here. I successfully flashed the cm 10.2 nightly /(3rd sept) to my nook hd emmc but when trying to flash leapinlar`s sd swap for cm 10.1-10.2 it errors in cwm saying product ovation where's the HD is hummingbird? There's only one file for both devices HD and HD plus can anyone help with this?
Cheers,
Hugest
Click to expand...
Click to collapse
I will look at the zip to see if it needs to be modded and get back to you.
Edit: You were right, there was an assert error in the zip. Fixed in rev6 now.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
I will look at the zip to see if it needs to be modded and get back to you.
Edit: You were right, there was an assert error in the zip. Fixed in rev6 now.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
Thanks for the rapid response and great work dude. Will give rev 6 a whirl now.
Hugest
Hi,
Ok that installed ok but still having issues: on boot all apps and processes crash (stop responding) when unlocking the nook if I clear cache in cwm it boots fine and I can see that the swap has occurred internal still shows 5gb but is actually my 32gb sd card. However I can't side load any apps I get an app not installed message even though unknown sources is ticked also as soon as I reboot the nook its back to square one and all the processes and apps crash.
I never saw any instructions for installing this i simply flashed from cwm recovery. Is there a set install order or process for this maybe I'm doing something wrong? I.e. does it need cm 10.2>sd swap>gapps all on initial flash? The only thing I can think is I'm installing the sd swap after I have installed a few apps
Cheers for the help,
Hugest
hugest_uk said:
Hi,
Ok that installed ok but still having issues: on boot all apps and processes crash (stop responding) when unlocking the nook if I clear cache in cwm it boots fine and I can see that the swap has occurred internal still shows 5gb but is actually my 32gb sd card. However I can't side load any apps I get an app not installed message even though unknown sources is ticked also as soon as I reboot the nook its back to square one and all the processes and apps crash.
I never saw any instructions for installing this i simply flashed from cwm recovery. Is there a set install order or process for this maybe I'm doing something wrong? I.e. does it need cm 10.2>sd swap>gapps all on initial flash? The only thing I can think is I'm installing the sd swap after I have installed a few apps
Cheers for the help,
Hugest
Click to expand...
Click to collapse
Remember this is a kludge, so everything does not work perfectly. I have found that sideloading apps from one of the SDs (I can't remember which) fails. Just copy the apk to the other one and try. And the setting storage shows wrong.
But I have not had apps and processes crash. If you have apps that were using internal for media storage, you may have to move their media files from internal to external. Like you say, you may want to start fresh with CM10.2, gapps and swap before you install any apps.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Remember this is a kludge, so everything does not work perfectly. I have found that sideloading apps from one of the SDs (I can't remember which) fails. Just copy the apk to the other one and try. And the setting storage shows wrong.
But I have not had apps and processes crash. If you have apps that were using internal for media storage, you may have to move their media files from internal to external. Like you say, you may want to start fresh with CM10.2, gapps and swap before you install any apps.
Sent from my Nook HD+ running CM10.1 on emmc.[/QUOT
Hi,
ok I cant seem to get this working. I have a similar mod on my S3 which works perfectly. I have done the following:
1) Tried it WIth 10.1 RC3. Boot to recovery wiped data and cache flashed 10.1 RC2 > GAPPS > SDSWAP on boot the swap hasn't happened if I then reboot and flash the swap again and go into storage the calculating space hangs at calculating and no apps will open when you click on them.
2) as above but tried flashing 10.1 RC2 > SDSWAP >GAPPS exactly the same results as above.
So it doesn't seem to work with 10.1 or 10.2?
EDIT: This is driving me insane lol
Ok if I flash the cm 10.1 and SDSWAP then look at es file explorer the swap has worked and apps open ok SDCARD0 shows 29GB and SDCARD1 5GB but I have the same issue as with 10.2 if I try and install an .apk from SDCARD0 it opens and displays the app permissions as normal then as soon as you click install you get an app not installed message ? IF I copy the .apk to SDCARD1 (the internal) I get a problem parsing package error. So the swap works but I cant install any .apk's
Cheers,
Hugest
Click to expand...
Click to collapse
I told you that settings/storage does not work. Why try it again and be surprised that it does not work?
And I just tested it again on the HD and install fails if you try from the real external SD. But it works from the internal SD. And I get no app crashes.
This is on the 7/08 CM10.1 from verygreen. I will now try on CM version.
Edit: I just updated to CM10.1 RC2 and it works the same.
Sent from my Nook HD+ running CM10.1 on emmc.
soffero anchor
leapinlar said:
I told you that settings/storage does not work. Why try it again and be surprised that it does not work?
And I just tested it again on the HD and install fails if you try from the real external SD. But it works from the internal SD. And I get no app crashes.
This is on the 7/08 CM10.1 from verygreen. I will now try on CM version.
Edit: I just updated to CM10.1 RC2 and it works the same.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Ok Thanks for checking that's strange as it definately doesn't work for me. I will just have to use the SD Card Install instead as I only have an 8gb nook and its not enough space.
Cheers,
Hugest
My Nook HD+ 32GB will only boot into CWM, did I brick it?
Let me trace back the steps that got me into this mess:
1) I had CM10.1 running ok, and felt adventurous to try CM10.2 yesterday. I downloaded cm-10.2-20130904-NIGHTLY-ovation.zip from http://download.cyanogenmod.com/?device=ovation, and installed ok.
2) Noticed Kindle app crashes as some people reported in CM10.2, also noticed that clock app stopped. So decided to go back to cm10.1.
3) Downloaded cm10.1.3-RC2 and installed it from CWM without wipe data (forgot that time, normally I do that step before install a ROM). After reboot, it hung at the Cyanogenmod circle.
4) So I booted with a SD card that was created from emmc-cwm-early2.1.img (from http://forum.xda-developers.com/showthread.php?t=2263553), trying to reinstall cm10.1.3-RC2 into a clean slate, and being too brave, I went into the "mounts and storage" option, formatted all the partitions one by one, including /rom, /system, /bootdata, /mmc, /cache, /data. My guess is that I did too much damage at formatting.
5) Then I installed cwm-recovery-ovation-2.zip first, then cm10.1.3-RC2 and gapps. The installation seemed ok. However, when I took out the SD card and reboot, I will see nook sign, then cyanoboot sign, then get into EMMC CWM-based recovery v6.0.3.2.
6) Tried to boot 8 times, does not seem to help, still can only boot into CWM.
7) Went into the "mounts and storage" option in CWM, noticed that only /cache and /data are mounted, and I don't see /rom partition listed. Without SD card in the nook, I can mount /bootdata and /system, mount /sdcard will report "Error mounting /sdcard!", mount /mmc will not report anything, but the status is still unmounted.
8) Fresh boot into CMW, and go into advanced -> show log, here is what I get:
Code:
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I: Checking for extendedcommand...
I:Skipping execution of extendedcommand. file not found...
I:Can't format unknown volume: /external_sd
I:Can't partition non-vfat: datamedia
If I tried to mount /emmc first and come to show log, I noticed that there will be an extra line:
Code:
I: using /data/media for /emmc
before
Code:
I:Can't format unknown volume: /external_sd
I:Can't partition non-vfat: datamedia
If I tried to mount /sdcard first and come to show log, I noticed that there will be a few extra lines:
Code:
W: failed to mount /dev/block/mmcblk1p1 (No such file or directory)
Error mounting /sdcard!
before
Code:
I:Can't format unknown volume: /external_sd
I:Can't partition non-vfat: datamedia
9) When reboot system now from CWM, it says "Root access is missing. Root device?" Choose yes or no does not change the effect that Nook HD only boots into ENNC CWM.
10) My problem bears some resemblance to what reported in http://forum.xda-developers.com/showthread.php?t=2221289, but apparently different.
11) Before I find a fix, I was trying to use CM10.1 on SDCARD following http://forum.xda-developers.com/showthread.php?t=2087988. I have a SanDisk 32G card (not recommended SanDisk U1 card), but after WIn32DiskImager wrote the image to the card, the partition is too smalll to even put the cm10.1 sdcard zip file on to it, and I don't think I have access to the internal sdcard right now. So running cm10.1 on sdcard won't work for me either.
Please help me find a solution, the preferred situation would be to running cm10.1 on emmc as I had before.
Hope I provided enough information for you to decipher the problem.
You should not have formatted /bootdata. And I don't think early 2.1 lets you format /rom, so I doubt you did that. Your only fix is to send me your serial number by PM and I will make a custom zip that will restore /bootdata.
Edit: ok, link with repair zip sent via PM.
Sent from my Nook HD+ running CM10.1 on emmc.
It's working, thanks a bunch
Thank you very much. You are a life saver (Nook HD+'s life at least).
After flash your zip and reinstall the cm10.1 rom & gapps, I am back to cm10.1. Just need a bit more time to restore apps to my previous running state.
Noticed that there were some screen flickering when in system settings pages. A reboot seems makes it much better. Hope it will go away with time.
similar problem
I seem to have the same problem only I didn't go in and format all those partitions. But I installed the rc2 update and now all I get is the boot logo when I try to boot from stock emmc. Would the same thing work for me if I sent you my serial number?
[email protected] said:
I seem to have the same problem only I didn't go in and format all those partitions. But I installed the rc2 update and now all I get is the boot logo when I try to boot from stock emmc. Would the same thing work for me if I sent you my serial number?
Click to expand...
Click to collapse
No, my repair zip will not help if you did not format /bootdata.
Explain more what you did. You say you did the rc2 update, but to what? SD install or emmc?
And you say boot logo when trying to boot to stock emmc. You still have stock on emmc? That tells me you had CM10.1 on SD. And you flashed rc2? That is for emmc. And what does the boot logo look like? Describe it.
Sent from my Nook HD+ running CM10.1 on emmc.
fixed
leapinlar said:
No, my repair zip will not help if you did not format /bootdata.
Explain more what you did. You say you did the rc2 update, but to what? SD install or emmc?
And you say boot logo when trying to boot to stock emmc. You still have stock on emmc? That tells me you had CM10.1 on SD. And you flashed rc2? That is for emmc. And what does the boot logo look like? Describe it.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I allowed CM10 to initiate its own update supposedly on the SD card and the next thing I knew I couldn't access stick anymore. I tried the 8 failed boots a couple times to no avail, but on a whim I tried it again yesterday and suddenly it worked. I've got everything back the way I want it now.
Apparently I assumed that the update notice from cyanogenmod was for the OS I was actually running in hybrid mode. I won't make that assumption again.
I appreciate your time.
I think I brick my NOOK HD+ today by same way. I was using the CM10.2 and tried to flash CM10.1 RC2. First, I flashed the wrong CM rom to the NOOK HD+, so it won't start. After I noticed it. I tried to reset the whole thing and format everything one by one including /bootdata, /system, /cache, /emmc and /data. Now I know of course the NOOK won't start. I also tried to restore the NOOK HD+ by my backup of stock rom. All the flashing process went no problem, but the NOOK HD+ won't start. Now I can't see anything when I start the HD+ without SD card. The only thing I can do is boot by emmc CWM SD card. Do I still have hope? or the nook is gone....
leapinlar said:
No, my repair zip will not help if you did not format /bootdata.
Explain more what you did. You say you did the rc2 update, but to what? SD install or emmc?
And you say boot logo when trying to boot to stock emmc. You still have stock on emmc? That tells me you had CM10.1 on SD. And you flashed rc2? That is for emmc. And what does the boot logo look like? Describe it.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
randansto said:
I think I brick my NOOK HD+ today by same way. I was using the CM10.2 and tried to flash CM10.1 RC2. First, I flashed the wrong CM rom to the NOOK HD+, so it won't start. After I noticed it. I tried to reset the whole thing and format everything one by one including /bootdata, /system, /cache, /emmc and /data. Now I know of course the NOOK won't start. I also tried to restore the NOOK HD+ by my backup of stock rom. All the flashing process went no problem, but the NOOK HD+ won't start. Now I can't see anything when I start the HD+ without SD card. The only thing I can do is boot by emmc CWM SD card. Do I still have hope? or the nook is gone....
Click to expand...
Click to collapse
You should not have formatted /bootdata! The only way to repair it now is for you to send me your serial number by Private Message and I will make you a repair zip.
Sent from my Nook HD+ running CM10.1 on emmc.
Sent! Thanks a lot...
leapinlar said:
You should not have formatted /bootdata! The only way to repair it now is for you to send me your serial number by Private Message and I will make you a repair zip.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
---------- Post added at 10:52 PM ---------- Previous post was at 09:58 PM ----------
Thanks for the zip file. Unfortunately, it didn't work for me. I flashed the zip file, CWM, CM10.2, and Google Apps. It still won't start. I see nothing when I push the power button without SD card.
leapinlar said:
You should not have formatted /bootdata! The only way to repair it now is for you to send me your serial number by Private Message and I will make you a repair zip.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
randansto said:
Sent! Thanks a lot...
---------- Post added at 10:52 PM ---------- Previous post was at 09:58 PM ----------
Thanks for the zip file. Unfortunately, it didn't work for me. I flashed the zip file, CWM, CM10.2, and Google Apps. It still won't start. I see nothing when I push the power button without SD card.
Click to expand...
Click to collapse
Then it is possible you go bit by the emmc trim bug. Look at verygreen's CM10.2 thread to read about.
Edit: I see after re-reading your first post that you had the no boot problem before you formatted /bootdata. So the emmc brick issue sounds more like what is wrong.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks a lot for your help! Before I formated /bootdata, I messed up the NOOK HD+ by wrong CM package (cm-10.1.3-RC2-hummingbird). when I start the nook without SD, I still saw start picture and words for a few second, and then they would became blurred and screen turned black. After I format /bootdata, the screen has no reaction at all. For those eMMC brick issue, I didn't use any CM10.2 version before 8/15 nightly. I only used CM10.2 version after 8/30 nightly. Will it still trigger this bug?
leapinlar said:
Then it is possible you go bit by the emmc trim bug. Look at verygreen's CM10.2 thread to read about.
Edit: I see after re-reading your first post that you had the no boot problem before you formatted /bootdata. So the emmc brick issue sounds more like what is wrong.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
randansto said:
Thanks a lot for your help! Before I formated /bootdata, I messed up the NOOK HD+ by wrong CM package (cm-10.1.3-RC2-hummingbird). when I start the nook without SD, I still saw start picture and words for a few second, and then they would became blurred and screen turned black. After I format /bootdata, the screen has no reaction at all. For those eMMC brick issue, I didn't use any CM10.2 version before 8/15 nightly. I only used CM10.2 version after 8/30 nightly. Will it still trigger this bug?
Click to expand...
Click to collapse
You might try reflashing plain stock. That puts more boot files back on emmc than CM. You can get it at my HD/HD+ CWM thread linked in my signature, item 6.
The reason I thought emmc bug was how it acted, not what you were running.
Edit: I'm curious, how did you manage to flash a hummingbird ROM zip to your ovation? That is not supposed to be possible because of safety assert statements in the ROM zip.
Sent from my Nook HD+ running CM10.1 on emmc.
My HD is back!!! Your zip file is working. I tried the last time to restore my original rom backup. When reboot, I select 'no' to let the default bootloader to overwrite CWM, 'no' for root. And the HD+ is back to stock room!!!
Thanks a lot!!!
leapinlar said:
You might try reflashing plain stock. That puts more boot files back on emmc than CM. You can get it at my HD/HD+ CWM thread linked in my signature, item 6.
The reason I thought emmc bug was how it acted, not what you were running.
Edit: I'm curious, how did you manage to flash a hummingbird ROM zip to your ovation? That is not supposed to be possible because of safety assert statements in the ROM zip.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
randansto said:
My HD is back!!! Your zip file is working. I tried the last time to restore my original rom backup. When reboot, I select 'no' to let the default bootloader to overwrite CWM, 'no' for root. And the HD+ is back to stock room!!!
Thanks a lot!!!
Click to expand...
Click to collapse
Ok, the reason you got it back was the stock ROM adds two more boot files than a restore would do.
You did not answer my question how you managed to successfully flash a hummingbird ROM to an ovation device. Did you toggle asserts by any chance?
Sent from my Nook HD+ running CM10.1 on emmc.
I edited the updater-script file to make it happen.....I didn't think it when I did it....I should get some sleep.....
leapinlar said:
Ok, the reason you got it back was the stock ROM adds two more boot files than a restore would do.
You did not answer my question how you managed to successfully flash a hummingbird ROM to an ovation device. Did you toggle asserts by any chance?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
randansto said:
I edited the updater-script file to make it happen.....I didn't think it when I did it....I should get some sleep.....
Click to expand...
Click to collapse
Some people are just too smart for their own good. LOL
Sent from my Nook HD+ running CM10.1 on emmc.
Always boots into CWM...
I hit a similar issue today, where the Nook HD+ will only boot into CWM.
I was using an old 10.1 build, from June 30, 2013. I decided to upgrade because of the constant reboots.
I selected the 10.1.3 RC2 build. As usual, nandroid backup, wipe data/cache/dalvik, install ROM, install GAPPS.
I found this thread, and decided to go back to stock via item #6 from here: http://forum.xda-developers.com/showthread.php?t=2062613 , as stated above. Wiped data and cache just in case.
Reboot into CWM continues.
An EMMC trim bug was mentioned above. Does this mean I have hit that issue? Is there recovery from it?
hyuga said:
I hit a similar issue today, where the Nook HD+ will only boot into CWM.
I was using an old 10.1 build, from June 30, 2013. I decided to upgrade because of the constant reboots.
I selected the 10.1.3 RC2 build. As usual, nandroid backup, wipe data/cache/dalvik, install ROM, install GAPPS.
I found this thread, and decided to go back to stock via item #6 from here: http://forum.xda-developers.com/showthread.php?t=2062613 , as stated above. Wiped data and cache just in case.
Reboot into CWM continues.
An EMMC trim bug was mentioned above. Does this mean I have hit that issue? Is there recovery from it?
Click to expand...
Click to collapse
If you have the emmc trim bug there is no fixing it. But based on your description, I don't think you have it.
Did you flash the CWM to internal memory? And that is what it boots to, rather than a bootable SD? If so, you may have to PM me with your serial number and I will make a repair zip for you.
If you are booting CWM from SD, what happens if you take the SD out?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
If you have the emmc trim bug there is no fixing it. But based on your description, I don't think you have it.
Did you flash the CWM to internal memory? And that is what it boots to, rather than a bootable SD? If so, you may have to PM me with your serial number and I will make a repair zip for you.
If you are booting CWM from SD, what happens if you take the SD out?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for the quick reply. I flashed to internal memory, yes. You question about where is it set to boot from made me realize my mistake. I left the bootable microSD card inserted, so it was defaulting to booting off of it. I spent some time in the corner thinking about it... sigh...
I re-flashed 10.1.3 RC2, GAPPS, and the recovery (was not sure at this point if I had rewritten it...), removed the microSD card, and it booted into CM without problems.
Thanks for your prompt offer to help leapinlar! Your insight was what I needed to notice the problem.
May I ask you if I can get the custom zip you made?
leapinlar said:
You should not have formatted /bootdata. And I don't think early 2.1 lets you format /rom, so I doubt you did that. Your only fix is to send me your serial number by PM and I will make a custom zip that will restore /bootdata.
Edit: ok, link with repair zip sent via PM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I have same situation with my nook HD+. I is driving me crazy
If you don't mind, can I get the custom zip you made? please
Thank you.
[email protected]
My 16 GB Nook HD+ has about run out of memory, and I notice that it doesn't use the SD Card for anything...which means there's about 30 gbs available for use on whatever.
I was wondering if, outside of a CM 10.1 SD install, there's a way to increase storage capacity via a storage swap (like the SD swaps on the Galaxy phones) or storage Kernel(similar to the Stock SD swap for the Rooted Stock Rom)?
neoage said:
My 16 GB Nook HD+ has about run out of memory, and I notice that it doesn't use the SD Card for anything...which means there's about 30 gbs available for use on whatever.
I was wondering if, outside of a CM 10.1 SD install, there's a way to increase storage capacity via a storage swap (like the SD swaps on the Galaxy phones) or storage Kernel(similar to the Stock SD swap for the Rooted Stock Rom)?
Click to expand...
Click to collapse
Yes, look in my HD/HD+ CWM thread. I have a swap zip for stock. It does not need to be rooted.
Sent from my Galaxy Tab 2 using XDA Premium
leapinlar said:
Yes, look in my HD/HD+ CWM thread. I have a swap zip for stock. It does not need to be rooted.
Sent from my Galaxy Tab 2 using XDA Premium
Click to expand...
Click to collapse
I'm currently rooted, using Carbon Rom. Would that kernel still work?
neoage said:
I'm currently rooted, using Carbon Rom. Would that kernel still work?
Click to expand...
Click to collapse
It is not a kernel change. It is a script that is run at boot time. And I don't know if it will work on Carbon. But since Carbon is based on CM, it might work to use the zip for swapping on CM.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
It is not a kernel change. It is a script that is run at boot time. And I don't know if it will work on Carbon. But since Carbon is based on CM, it might work to use the zip for swapping on CM.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.
neoage said:
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.
Click to expand...
Click to collapse
I ran the script and when I looked at Settings->storage that the internal card stats showed in internal and sdcard. But, when I attached to PC, exactly what i wanted happened. The internal and ExtSdcard are swapped.
neoage said:
I ran the script, the "SDSwap for CM 10.1 EMMC" and it didn't work, it gave me an error stating that it couldn't find CM. I ran the NookHD+ SDSwap and it installed without errors, but I still see my internal memory at 12 gbs.
Anything else I could try? Or maybe I flashed it wrong? I flashed it via a CWM Boot SD that I made.
Click to expand...
Click to collapse
What rom are you running? Are you running rev6 of the swap zip? This version is for official CM only. The title says that and the CM not found message says that.
And that second swap you ran is for stock.
Edit: I see from your post earlier that you are running the Carbon ROM. The zip is designed to abort if not an official CM ROM. Extract the 11extsd2internalsd file from the zip and copy it to a new folder /data/local/userinit.d and set its permissions to execute in all three boxes. (Since you flashed that other zip, there may be a file 11SDswap there. Delete it.) Reboot and see if if it worked. If not, delete the file.
Sent from my Nook HD+ running CM10.1 on emmc.
Yes, Carbon Rom. That same script is what I currently use on my phone, so I'm quite familiar with it. I'll try it now.
Has the script been modified for the Nook, or is it as-is?
Sent from my Nook HD+ using XDA Premium HD app
neoage said:
Yes, Carbon Rom. That same script is what I currently use on my phone, so I'm quite familiar with it. I'll try it now.
Has the script been modified for the Nook, or is it as-is?
Sent from my Nook HD+ using XDA Premium HD app
Click to expand...
Click to collapse
It has been modified for the HD/HD+.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
What rom are you running? Are you running rev6 of the swap zip? This version is for official CM only. The title says that and the CM not found message says that.
And that second swap you ran is for stock.
Edit: I see from your post earlier that you are running the Carbon ROM. The zip is designed to abort if not an official CM ROM. Extract the 11extsd2internalsd file from the zip and copy it to a new folder /data/local/userinit.d and set its permissions to execute in all three boxes. (Since you flashed that other zip, there may be a file 11SDswap there. Delete it.) Reboot and see if if it worked. If not, delete the file.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
king200 said:
I ran the script and when I looked at Settings->storage that the internal card stats showed in internal and sdcard. But, when I attached to PC, exactly what i wanted happened. The internal and ExtSdcard are swapped.
Click to expand...
Click to collapse
leapinlar said:
It has been modified for the HD/HD+.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Good news! I've figured out how to make this work, AND with my SDXC FAT32-formatted 64 GB sd card!
Here's what I did:
1 - Extracted the 11extsd2internalsd file from the "SDSWAP for CM 10.2" zip
2 - Copied that over to my 64 GB SD card
3 - Once inside, make sure you're rooted, use a root explorer App (Root Explorer or ES File Manager, ES Explorer)
4 - Paste the file in the System/Etc/init.d folder (in internal memory)
4.5 - Tap & Hold over the file, tap Permissions, and enable all 3 "Execute" options.
5 - Download a script manager app
6 - Install, enter the program, click on "browse as root", and tap OK.
7 - Navigate over to the system/etc/init.d folder
8 - tap on the icons for SU and Boot.
9 - Save
Once you reboot, you'll notice that your internal storage is now your SD Card's storage capacity!
NOTE:
Copy over ALL your internal memory over to your SD Card for this to 100% work. If not, you'll wind up with a bunch of errors.
I've seen that reinstalling the ROM & Gapps over this new one(dirty boot) apparently solves the problem, but I haven't tried that yet.
ONLY for advanced users.
EDIT: Apparently moving the files from MNT/SDcard over to /ExtSDCard doesn't work like it does on the phones...I'l research this further...THere has to be something to move over to the external SDCard prior to the script enable for this to work flawlessly.
The script works. If it is init.d folder, you shouldn't need Smanager. I'm thinking the script might execute earlier in boot process without a script app.
king200 said:
The script works. If it is init.d folder, you shouldn't need Smanager. I'm thinking the script might execute earlier in boot process without a script app.
Click to expand...
Click to collapse
I tried it with and without. With Smanager, I got in and, of course,it had a bunch of errors. Without Smanager, it wouldn't work as well, since it'd only recognize internal memory as extSDCard AND SdCard and nothing I did would stop the errors.
What I'm trying to figure out is, why? Anything in init.d runs on its own, yet in my case, even before I experimented with script manager, it didnt recognize it.
Now I have another dilemma - What do I move over to the SD Card, and in what file structure, to make this work efficiently?
neoage said:
I tried it with and without. With Smanager, I got in and, of course,it had a bunch of errors. Without Smanager, it wouldn't work as well, since it'd only recognize internal memory as extSDCard AND SdCard and nothing I did would stop the errors.
What I'm trying to figure out is, why? Anything in init.d runs on its own, yet in my case, even before I experimented with script manager, it didnt recognize it.
Now I have another dilemma - What do I move over to the SD Card, and in what file structure, to make this work efficiently?
Click to expand...
Click to collapse
Did you set the permissions for the script file to execute. And you can just as easily put the script in /data/local/userinit.d. That is automatically loaded by init.d (see the 90 script in init.d). That way you do not need to edit each time you flash an updated ROM.
Edit: But maybe Carbon does not have that 90 script? If it doesn't that would explain why my script did not work.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Did you set the permissions for the script file to execute. And you can just as easily put the script in /data/local/userinit.d. That is automatically loaded by init.d (see the 90 script in init.d). That way you do not need to edit each time you flash an updated ROM.
Edit: But maybe Carbon does not have that 90 script? If it doesn't that would explain why my script did not work.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
I don't think so. As a matter of fact, I went through all 3 available Carbon Roms today and each was worse than the last when it came to this. I noticed that in each rom, (Unnofficial-Custom, Xperia, and Unofficial-Basic) init.d behaves differently - in basic, it accepted the file without problem, whereas in Xperia, the file needed scriptmanager to function. Unofficial Custom however, downright neglected it and kept me in a bootloop, which is where I am now.
I don't think it has anything to do with the rom itself, however. I believe that, for some strange reason, each time I've used my CWM SD card, the HD+ has been using up its resources to the point where the Nook itself won't boot CWM anymore, as if wiping Data, Data/Media, and Cache haven't cleaned up the necessary files to start fresh. That's another topic, though.