Database Develop

[Q] i think that im ****ed

ok i have a problem, my htc incredible s was rooted but i wanted to unroot so i downloaded a RUU and installed it, everything worked fine but when he rebooted my phone stuck on the HTC logo doing nothing, so i pressed volume down and power and this is wat my phone says:
-Revolutionary-
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3822.10.08.28_M
eMMC-boot
Apr 1 2011, 18:34:39
If i go into recovery he gives a red triangle with ( ! ) in it.
I realy hope that you guys can help me, because i want to go back to stock or just install a rom so i can use my phone again.

You're not f***ed, dude You can get your recovery back by flashing a new one trough a PG32IMG.zip. To unroot your phone properly it's not enough to just flash a RUU. I once found a great guide on the internet but it's in German. But it worked for me, so it's definitely possible

WILLI120 said:
You're not f***ed, dude You can get your recovery back by flashing a new one trough a PG32IMG.zip. To unroot your phone properly it's not enough to just flash a RUU. I once found a great guide on the internet but it's in German. But it worked for me, so it's definitely possible
Click to expand...
Click to collapse
plz tell me how , because i already downloaded a pg321img from somewhere but that failed, and i`m now downloaden PG32IMG_VIVO_ICS_35_S_HTCCN_CHS_4.08.1400.2_Radio_20.72.30.0833U_3831.17.00.24_M_release_264218_signed.zip is this the good one?

The red triangle with the exclamation mark is the 'fail' indication in stock recovery, it seems that your ruu has written the recovery but has not written hBoot which is why your hBoot reads 6.xx (revolutionary). My advice is to get a goldcard micro sd card and re flash the ruu using a pc (provided that your inc s can go to hBoot USB). Then you will be unrooted to stock.
Edit.
Downgrade from pc using goldcard and USB mode. Use a gingerbread ROM, preferably from your region, or English WWE and not the ICS Chinese ruu, unless you're from China.
Sent from my HTC Incredible S

ragapa97 said:
The red triangle with the exclamation mark is the 'fail' indication in stock recovery, it seems that your ruu has written the recovery but has not written hBoot which is why your hBoot reads 6.xx (revolutionary). My advice is to get a goldcard micro sd card and re flash the ruu using a pc (provided that your inc s can go to hBoot USB). Then you Elko be unrooted to stock.
Sent from my HTC Incredible S
Click to expand...
Click to collapse
how do i do that if i cant get in my phone?

Run the ruu.exe file from pc. Don't use pg132.IMG method.
Sent from my HTC Incredible S

ok dude, i realy dont know how to make a goldcard or so ever, i tried to do it with some tutorials but that failed.

How'd you get s-off using revolutionary? Didn't you make a goldcard for it? There's an excellent tutorial in the sticky section on how to make a goldcard. If I remember right, it takes just the 15 min including the time it takes for the revskills site to email you the IMG file. Best of luck.
Sent from my HTC Incredible S

ragapa97 said:
How'd you get s-off using revolutionary? Didn't you make a goldcard for it? There's an excellent tutorial in the sticky section on how to make a goldcard. If I remember right, it takes just the 15 min including the time it takes for the revskills site to email you the IMG file. Best of luck.
Sent from my HTC Incredible S
Click to expand...
Click to collapse
ok and when i have a goldcard what do i do than?

Run the ruu. As explained in previous posts. Keep the phone in hBoot mode. (hboot USB to upload the rui)
Sent from my HTC Incredible S

i dont get it, first of all i cant/ dont know how to make a freaking gold card!?! and those tutorials are ****ing confusing, typing al kinds of stuff in cmd what always fails when i do it.
omfg i got really frustrated right now, i need to get my phone back workign :S:S:S

This happen to me before...just same like you. What i did is install the ruu back using hboot usb. But the ruu im using is gb2.3.3 sense 2.1 because i try another ruu its not working for me..maybe i came from gb2.3.3.

ayieo7 said:
This happen to me before...just same like you. What i did is install the ruu back using hboot usb. But the ruu im using is gb2.3.3 sense 2.1 because i try another ruu its not working for me..maybe i came from gb2.3.3.
Click to expand...
Click to collapse
i already tried that,
Isnt it possible to unroot my phone again? i dont care if im not using stock rom i just want to use my phone!!!

Sandert93 said:
ok i have a problem, my htc incredible s was rooted but i wanted to unroot so i downloaded a RUU and installed it, everything worked fine but when he rebooted my phone stuck on the HTC logo doing nothing, so i pressed volume down and power and this is wat my phone says:
-Revolutionary-
VIVO PVT SHIP S-OFF RL
HBOOT-6.13.1002
RADIO-3822.10.08.28_M
eMMC-boot
Apr 1 2011, 18:34:39
If i go into recovery he gives a red triangle with ( ! ) in it.
I realy hope that you guys can help me, because i want to go back to stock or just install a rom so i can use my phone again.
Click to expand...
Click to collapse
OK, here is what you need to do:
1. Boot the phone into FASTBOOT USB mode and then flash ClockworkMod recovery image using the command:
fastboot flash recovery [path to recovery.img]
That will restore ClockworkMod.
From there you can either restore a previous nandroid backup you made or flash a new custom ROM.
Here is the link for ClockworkMod recovery image:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-vivo.img

tpbklake said:
OK, here is what you need to do:
1. Boot the phone into FASTBOOT USB mode and then flash ClockworkMod recovery image using the command:
fastboot flash recovery [path to recovery.img]
That will restore ClockworkMod.
From there you can either restore a previous nandroid backup you made or flash a new custom ROM.
Here is the link for ClockworkMod recovery image:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-vivo.img
Click to expand...
Click to collapse
ok i recovered clockworkmod, and flash the new CM7.2 but im still stuck at HTC (green /white ) screen..

just put the recovery.img image in the android sdk folder along with adb
then follow the follwoing steps
1) goto your hboot screen ...the one in which three android appears
2) select fastboot by pressing vol down -up and then power button to select
3) connect mobile to pc
4) fire up cmd
5)navigate to the folder in cmd using cd command ( which has adb.exe)
6)type in cmd now fastboot flash recovery recovery.img
you are done!!!!!!
hope it helps:laugh:

Sandert93 said:
i have downloaded the img, and saved it in my C drive or do i need to put it on my SDcard? (sorry im realy a leek in flashing)
If i need to put it on my pc, than the cd wont work?
Click to expand...
Click to collapse
Nope let it remain on your PC.
The command should be fastboot flash recovery C:\Downloads\recovery.img

thanks bro`s that helped a bit, atleast i can flash roms now .
But i have flashed CM7 (stable) and when i reboot my phone still stuck at the HTC logo, what should i do? try other rom?

Sandert93 said:
thanks bro`s that helped a bit, atleast i can flash roms now .
But i have flashed CM7 (stable) and when i reboot my phone still stuck at the HTC logo, what should i do? try other rom?
Click to expand...
Click to collapse
First thing to try is to do a full system wipe and reflash CM7.

tpbklake said:
First thing to try is to do a full system wipe and reflash CM7.
Click to expand...
Click to collapse
ok lets give it a try,
Oh and btw is it normal that when i wipe someting clockworkmod says:
Clcokworkmod recover v5.0.2.0
E:Cant mount /cache/recovery/coommand
and recovery log and:
E:cant mount /cache/recovery/last_log?
omfg it works thank you guys, ill never ever touch the power and volume down
Wel maybe when i get bored of this rom, anyway thanks all!!

[Q] phone stuck on boot

so i was stuck for a long time with a crappy rom that kept getting my calls stuck,so today i finally switched it to cooldroid revolution and it got stuck on boot so i tried to maybe switch some kernels and nothing worked so i tried other roms as well like Nik's Project X and paranoidandroid
and nothing works im stuck like that without a phone all day. can someone please find a answer?

Noamzoro said:
so i was stuck for a long time with a crappy rom that kept getting my calls stuck,so today i finally switched it to cooldroid revolution and it got stuck on boot so i tried to maybe switch some kernels and nothing worked so i tried other roms as well like Nik's Project X and paranoidandroid
and nothing works im stuck like that without a phone all day. can someone please find a answer?
Click to expand...
Click to collapse
What HBOOT version are you running and are you S-OFF or S-ON. You didn't give enough information to give you a straight answer.
Off hand, I would say that you are using an unlocked HBOOT, so you probably just need to manually flash the boot.img file from the last ROM you tried to install.

tpbklake said:
What HBOOT version are you running and are you S-OFF or S-ON. You didn't give enough information to give you a straight answer.
Off hand, I would say that you are using an unlocked HBOOT, so you probably just need to manually flash the boot.img file from the last ROM you tried to install.
Click to expand...
Click to collapse
im using 1.16.0000 Hboot and S-On

Noamzoro said:
im using 1.16.0000 Hboot and S-On
Click to expand...
Click to collapse
follow the steps.
1. extract boot.img from zip file
2. go to adb tools ..if you dont know what adb is google it....
3. fire up adb ...
4.put your phone in fastboot mode ..(boot in hboot by powering down your phone and press vol-down and power togethr while switching on)
5. connect to your pc
6. type fastboot flash boot boot.img
7. reboot your phone
8. done...
and yes important stuff only falsh the boot.img file of the rom installed on your device..dont flash any other boot.ing

in serious need of help for the phone!!!!

Hi guys,
I'm new to the android world. I was playing around with my mum's HTC(was on ICS) and tried to root it, but im not sure if its rooted now, but i have ****ed the phone up hardcore
The problem is phone stuck on HTC Logo and won't boot. It's possible to get it in bootloader and it looks like this: I have unlocked it HTCdev.com
*UNLOCKED*
S-ON
HBoot: 1.28.0004
RADIO-3831.15.00.20_M
eMMC-boot
I dont get a connection to the PC, but after first time plug-in it installed the drivers.
So now my question is how can I get an new Ruu on this phone. Would it be fixed by me installing the ICS RUU.exe file?
I can't seem to find it i do have the code from the HTCdev, but i do not have ANY clue what to do..... Please help me out

To get the correct drivers that are needed for the phone you either should install htc sync then uninistall it again or you should go download my tool, it has an installer for drivers for windows, just not windows 8.
About the code from htcdev, that part you have used correctly. That is a bin file you used to get bootloader *UNLOCKED* and since its saying unlocked you should be good to go.
After unlocking the bootloader you can go to bootloader and flash a custom recovery. To do that you can simple install my runnymede aio tool and press either twrp or cwm recovery button. It will pop up with a box that says "Press Ok when in bootloader" and since you are already in bootloader you can just skip that part and press ok.
after it has flashed recovery it will try to boot to the system just go to bootloader again
When you are in bootloader you can go into recovery.
After that you can flash any custom rom but if you want to stay on a custom rom i will recommed you to flash to specific roms first, found in the "guide" in my Runnymede AIO Tool. And then after that flash any rom for our phone. I know it sounds a little stupid and is is also not cofirmed giving any diffrence but it looks like the htc sensation xl is much more hard to brick if these two roms have been flashed.
If you just want to go back to stock , then flash a custom rom and boot it up.
Then use the function in my tool from fully booted to s-off just remeber to use the one that says your hboot version.
A note here: Hboot version 1.25 = 6.25 and 1.28 = 6.28
after that is done boot the phone up normally and run a ruu.exe file and you will end up in a stock locked rom after that.

Thanks Anders3408 i have followed your instructions and have downloaded your tool(which works like wonders).
Now i am facing another problem. My current rom is a custom one (1.56.401.2), but it tells me there are no hard disk spaces and i keep getting Contacts Storage stopped message (even after i press send report to HTC or even if i declined it....)

I have a similar problem....i'm S-ON UNLOACKED....hboot 1.28.0006 ....i can only have fastboot connection...i even tryed an RUU (RUU_RUNNYMEDE_ICS_35_S_HTC_Europe_2.31.401.2_Radio_20.70.30.0832U_3831.16.00.16_M_release_258303_signed) but still bootloop! :/ I'm driving crazy!!!
ps: tried to flash a custom recovery but doesn't work!!! (during flash i was on s-on because i couldn't flash hboot s-off )...The phone has no root.

It you have EUROPE CID then flash this
http://www.shipped-roms.com/index.ph...odel=Runnymede
If link doesnt work then here the same
http://hotfile.com/dl/145704399/e91...822.10.10.12_M_release_222101_signed.exe.html
Install that Europe Version of GingerBread.
When finish let it boot and when setup is finish update via OTA to ICS..
If this still doesn´t work then S-off with this. ----->
http://unlimited.io/runnymede.htm
You will change your hboot version. Use that 4445 version in download. Its unsecure hboot.
Follow the ADB steps carefully and when done reboot into bootloader again. Flash custom recovery like TWRP
Wipe cache,dalvik,system
Then reboot into bootloader again
FastbootADB and run the RUU from PC

Sv: in serious need of help for the phone!!!!
bihslk said:
It you have EUROPE CID then flash this
http://www.shipped-roms.com/index.ph...odel=Runnymede
If link doesnt work then here the same
http://hotfile.com/dl/145704399/e91...822.10.10.12_M_release_222101_signed.exe.html
Install that Europe Version of GingerBread.
When finish let it boot and when setup is finish update via OTA to ICS..
If this still doesn´t work then S-off with this. ----->
http://unlimited.io/runnymede.htm
You will change your hboot version. Use that 4445 version in download. Its unsecure hboot.
Follow the ADB steps carefully and when done reboot into bootloader again. Flash custom recovery like TWRP
Wipe cache,dalvik,system
Then reboot into bootloader again
FastbootADB and run the RUU from PC
Click to expand...
Click to collapse
No need to do everything by yourself. My tool uses the same files and procedure to make the phone s-off. Just boot it up and enable debugging in settings then press the s-off button that fits hour hboot
Sent from my HTC Sensation using xda premium

anders3408 said:
No need to do everything by yourself. My tool uses the same files and procedure to make the phone s-off. Just boot it up and enable debugging in settings then press the s-off button that fits hour hboot
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Yeah he can do this 2 but how can he BOOT and enable DEBUG mode if he stuck at HTC LOGO???

Sv: in serious need of help for the phone!!!!
bihslk said:
Yeah he can do this 2 but how can he BOOT and enable DEBUG mode if he stuck at HTC LOGO???
Click to expand...
Click to collapse
Many phones do have ADb connection while booting
Sent from my HTC Sensation using xda premium

anders3408 said:
Many phones do have ADb connection while booting
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
OKEy

[Q] So... I screwed up.

Hey guys,
This will be an interesting first post... I do have to say I apologize for making a thread regarding this, but I really feel like I'm stuck and would really benefit from some direct help. I've been searching non-stop for the last 2 days, and currently have more than 20 hours infront of my computer trying to figure out why I cannot restore this HTC One.
Details;
Tampered
Unlocked
M7_UL pvt ship S-ON RH
Hboot 1.55
Radio-4a.20.3263.16
OpenDSP-v32.120.274.0909
OS-3.22.631.1
eMMC-boot 2048mb
Sep17/2013
ROGERS CANADA NETWORK
-Currently cannot get any further than HBOOT and TWRP 2.6
-Ends up in boot loop
-Recognized on Fastboot, and device manager, but cannot access via My Computer
-Phone had a garbage ROM, and I ended up wiping my entire phone. Every single file.
-If I could somehow get an install onto it I could try to get it going through TWRP?
-I've downloaded several gigs of roms that I've tried, and cant seem to get them to work.
-Phone is essentially bricked and non-functional. There is a way to save it I think??
-ABD device not found, have SDK, fully updated drivers all around... nothing.
I just want the phone back to factory... but ROGERS RUU files are .zip and not .exe
Very difficult to figure out a solution...
Please help guys,
Sorry I could not get it on my own. New to phones but not new to computers and troubleshooting.
I'll leave this tab open and constantly check whilst I look for more answers on my issue.
Thank you!
-Spence

I would try sideloading a rom through TWRP. If I remember correctly, you need the latest ADB which comes bundled with this:
http://developer.android.com/sdk/index.html
I think having the latest ADB binaries may also help your PC detect your phone. Once you have that downloaded, you can sideload a rom. More info on that here:
http://teamw.in/ADBSideload

Finally got it to recognize the device on ADB
However it says unauthorized, because I assume I couldnt activate debugging.
Still cant because it's bricked!
Drivers are all up to date to the best of my knowledge
Double and triple checked?
I will try to do something through TWRP... I dont have a lot of experience with it, I know I was fighting with it for a couple hours today, trying to get through all the errors - or to detect my computer properly.
ADB Sideload Complete
Failed
Unable to mount across the board.
-Spencer
UPDATE:
Sideload seems to be working. Still getting errors for being unauthorized I think..
12:33am

Via CWM I was able to get Android Revolution HD to install, and actually went through the entire install process...
At the end it said some files were unable to be installed, and then put me back in the bootloader/cwm cycle...
I just want to get the phone stable enough to use, so that I can revert it back to stock!
-Spence

Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
20 hours in!

Bawshawg said:
Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
20 hours in!
Click to expand...
Click to collapse
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache

Uxepro said:
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
Click to expand...
Click to collapse
Followed by what though?
If I'm basically just starting from the hardware up?
Nothing seems to be going in my favour! :S

Bawshawg said:
Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
20 hours in!
Click to expand...
Click to collapse
Uxepro said:
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
Click to expand...
Click to collapse
ARHD 51 will not help as it still requires s-off
I'm going to recommend these instructions posted by @SaHiLzZ
Download Canadian 1.55 HBOOT recovery: http://goo.gl/2Kntxz
Download TWRP 2.6.3.3: http://techerrata.com/file/twrp2/m7/...2.6.3.3-m7.img
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot.
fastboot flash recovery recovery_stock_155hboot_htc_one_m7.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to proceed.
Click to expand...
Click to collapse
Sideload should work after this

Android revolution 51 does not require S-off...
Unless you want to upgrade the firmware

Uxepro said:
Android revolution 51 does not require S-off...
Unless you want to upgrade the firmware
Click to expand...
Click to collapse
please don't confuse things ... ARHD 51 will not boot / s-on
http://forum.xda-developers.com/showpost.php?p=50085331&postcount=185
http://forum.xda-developers.com/showpost.php?p=50084310&postcount=174
try Sideloading this one >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip

clsA said:
please don't confuse things ... ARHD 51 will not boot / s-on
http://forum.xda-developers.com/showpost.php?p=50085331&postcount=185
http://forum.xda-developers.com/showpost.php?p=50084310&postcount=174
Click to expand...
Click to collapse
It's an uncommon thing. It can happen, but it does not require s-off.
"You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF"

Uxepro said:
It's an uncommon thing. It can happen, but it does not require s-off.
"You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF"
Click to expand...
Click to collapse
Dude he just posted he flashed it and it won't boot .. what don't you understand ?

clsA said:
Dude he just posted he flashed it and it won't boot .. what don't you understand ?
Click to expand...
Click to collapse
It doesn't boot because he used twrp 2.6, instead of 2.6.3.3 or didn't erase cache
I was S-on and everything was fine with flashing arhd 51.
No way a rom requires s-off to be flashed, unless an upgrade of hboot is mandatory.

Folks!
Somehow, I ended up getting the HTC Guru reset to work....
After literally 24 hours of messing with this thing.
So now I am running 4.3
and in the near future will try to completely restore back to all Rogers Canada software and update to their Kitkat OTA???
Or should I just wait a bit for someone to release one that works correctly?
Thank you for the help!
-Spence

Bawshawg said:
Folks!
Somehow, I ended up getting the HTC Guru reset to work....
After literally 24 hours of messing with this thing.
So now I am running 4.3
and in the near future will try to completely restore back to all Rogers Canada software and update to their Kitkat OTA???
Or should I just wait a bit for someone to release one that works correctly?
Thank you for the help!
-Spence
Click to expand...
Click to collapse
Just upgrade your TWRP, and flash the 4.4.2 rom you want

If you can Soff, then you will be able to run RUU for dev edition kitkat, or do the google edition conversion. That will give you an upgrade path in future by OTA
sent from my mobile device

[Q] S-On, reboot loop, HBOOT 1.55, need to restore

I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.

Tmplt said:
I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.
Click to expand...
Click to collapse
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.

majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
sigh... How could I be so dense? I should know this. Thanks for the quick response. I will try this at once.

majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.

Tmplt said:
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.
Click to expand...
Click to collapse
It looks like a PC issue. Check out this post Installscript setup launcher has stopped working! In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.

majmoz said:
It looks like a PC issue. Check out this post ** In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.
Click to expand...
Click to collapse
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?

Tmplt said:
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?
Click to expand...
Click to collapse
what is the ruu version you are trying to use (complete file name)?

easiest way: download this guru reset file, its exactly the same version you have on your phone now.
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.

Help also
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.

Baconnugget said:
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Click to expand...
Click to collapse
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader

alray said:
what is the ruu version you are trying to use (complete file name)?
Click to expand...
Click to collapse
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.

Seanie280672 said:
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader
Click to expand...
Click to collapse
Thank you, I appreciate your advice. I tried flashing TWRP recovery but when I go into TWRP recovery, my touchscreen doesn't respond. Any thoughts on why? It works when I'm on CWM though.

Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
Did you name that file yourself, that's the wrong file, that one is O2 "206", hence 4.20.206.16 you need 401, 3.62.401.1 which is WWE, the same number under your os information in your first post and the same as the guru reset I linked.

Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
download this file: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.

Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?

Tmplt said:
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?
Click to expand...
Click to collapse
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip

alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
Thanks!
On an unrelated side-note; if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?

Tmplt said:
if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?
Click to expand...
Click to collapse
no, hitting the "thank" button doesn't count as an upvote like on other forum. This is only to say thank you to a person who helped you.

Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
alray said:
download this file: **
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.
Click to expand...
Click to collapse
alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
The ROM was successfully installed and I'm currently configuring my phone! The phone did not implode when restarting, something I take as a sign of a functional phone! A truckload of thanks for the both of ya!