Emergency Service Only - Captivate Q&A, Help & Troubleshooting

I would really appreciate some help. I'm stationed at Fort Nowhere for some Army training and I get emergency service only unless I force WCDMA only. Any ideas why I'm having this problem?

Have you done anything to your phone lately? Changed modems, roms, anything? What rom are you on? Does anyone else have any other signal there? Are you a stock rom? These are questions that may be able to help someone help you out further.
Presuming there IS a signal to be had there (I have had that come up when I was in a place that literally had NO signal and only showed a circle with a li e through it where the 3g/H would be). If others have a signal and depending on your rom your using, ie:rooted, etc. You could download the appropriate modems for your phone and flash them in cwm until you find one that has some kind of signal. Again MORE info would be needed to further aid you I think.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted

RockRatt said:
Have you done anything to your phone lately? Changed modems, roms, anything? What rom are you on? Does anyone else have any other signal there? Are you a stock rom? These are questions that may be able to help someone help you out further.
Presuming there IS a signal to be had there (I have had that come up when I was in a place that literally had NO signal and only showed a circle with a li e through it where the 3g/H would be). If others have a signal and depending on your rom your using, ie:rooted, etc. You could download the appropriate modems for your phone and flash them in cwm until you find one that has some kind of signal. Again MORE info would be needed to further aid you I think.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted
Click to expand...
Click to collapse
Thank you for your reply. No changes to anything (I never touch my phone before I leave for training!) and everyone else on AT&T has service (the same service I have if I force WCMDA). I did try flashing a couple other modems, but they all had the same results.

So I am guessing your rooted. What rom are you using? Is a i9000 rom or i897 rom? Do you have cwm 2x or 3x? Make sure to download the correct type from (most likely) the modem thread. I believe the cwm3 modems can flash to a cwm2 but not vice versa. Also when you power on your phone what does it show under Menu, settings, about phone, baseband version? If it shows UNKNOWN then you are most likely not using the correct modem for your phone. Also maybe try jk4 modem it seems to be a pretty good universal modem. More info as I stated above can help.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted

Related

SOLVED - Sasktel (bell) phone running Darky's ROM

Ok so I'm running Darky's 7.5 ROM just loaded it and it's flying . i'm having issues connecting to my carrier. I"m from canada and run on a network owned by Sasktel. We get our phones from Bell and our current release is JL2 I think. I was running this ROM fine but wanted to see what all the hype was about .
Now the only problem i'm having is I can't register on my network and thus my phone isn't working as a phone, lol. can someone help me set it up. here are the frequencies we run on.
SaskTel
GSM - N/A
UMTS/HSPA - 850/1900
I went into the APN and set that up so I should have data I just need to get registered. I can see the network Sasktel but it wont let me register. I get the exact message when clicking on it
"Registering on Sasktel......You SIM card does not allow a connection on this network"
any help would be great, thanks
I tried going in here *#2263# but didn't know what to pick so I left it to automatic
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
after flashing, your phone might have reverted back it's original lock which is to BELL.
I agree with the other reply stating for you to have your phone unlocked.
xxgg said:
I don't know.
When you flash back to official firmware, everything works fine again ?
This may sound funny but try 'sim unlock' your phone.
Click to expand...
Click to collapse
I unlocked my phone a while back and it's unlocked still, Network lock = off. and yes flashing to other roms specifically for my phone will work fine on the network. Is this because Darky's ROM is based on a European ROM JPY and i'm supposed to be running a Canadian ROM JL2?
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
adamge said:
Hi. I have a SGS straight from Sasktel here in SK. I checked my setting under 2263, and it is automatic (top one). After I checked it, it lost cellular connection for about a minute, then eventually came back (phew!).
Click to expand...
Click to collapse
awesome what happens when you go back into 2263 and click on the wcdma band, which ones are stared in there?I have 2100, 1900 and 900 starred but 850 is not.....Also could you post your APN settings. those are in settings, wireless network, mobile networks, access point names and then click on the inet.stm.sk.ca one and if it's not too much for you could you post them up here along with the wcdma band settings. Thanks bud
can we actually install darkys rom on BELL vibranat i9000M
i would like to find out if darkys Rom works with Bell vibrant thats i9000M from canada ?
well his rom is up and running fine yes, I just have to get the right setting to run on my carrier....I own a i9000m it's a bell phone that my carrier gets supply from. So yes his rom works great on this phone, it's so fast, I might try flashing a modem for the canadian phones and see if that works i'll post back
SOLVED - Sasktel (Bell) running Darky's ROM
So I figured it out, I was running JL2 and then flashed speedmod kernel to get 2e. I then upgraded to Darky's 7.5 ROM, when that came up I was unable to get on the network. I was getting an error "Sim doesn't allow connection on the network" error when looking in providers. anyways, I just flashed the JK3 modem and i'm back on the network with Darky's rom
I grabbed the modem from here.
http://forum.xda-developers.com/showthread.php?t=846237
I used JK3 because they were having issues with JK4 bricking for some reason and didn't want to risk it. now to just get JL2 modem some how
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
BlackDino said:
There is a JL2 modem floating around somewhere.
I am also running jk3 modem with xxJPY, love my phone now.
No more bridling issues
Click to expand...
Click to collapse
Me too, so fast and smooth
If we could get jl2 modem with darkys
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
notoriouspk said:
Is there a way to get jl2. Modem working with darkys then it would be perfect if u do find it let us know and make a step by step tutorial how it's done from the scratch for newbees canadiens thanks
Click to expand...
Click to collapse
It's very simple, TURN OFF ANY/ALL lag fixes!!!!! Back your **** up. then you can begin
You phone should be unlocked but might not have to be.....mine was, you can grab sgs unlocker form the app market also, You have to be running 2e recovery. so check on that first by powering your phone off, wait till it's actually off, froyo vibrates when it's shut down. After it's off, hold volume up, home button and power till you see the i9000m then let it go. it should boot into recovery. If you were running Froyo then you will have a 3e recovery, we need 2e. Also you should check and make sure you can get into download mode, by powering off, volume down, home and power key. If you can't get inot download mode you have to fix that first. if you can proceed:
So grab the recent stable speedmod kernel from hardcore here DON'T get the development version:
http://forum.xda-developers.com/showthread.php?t=822756&highlight=speedmod
depending on how you want to flash grab either the CWM or the other one which needs to be flashed via odin. Flash either or and your phone should boot with 2e. follow the instructions hardcore has posted and make sure you hit the thanks button for him .
After we have 2e installed you can grab Darky's ROM located here:
http://forum.xda-developers.com/showthread.php?t=814091
I used the non wipe one and didn't have issues, make sure you back your **** up before flashing anything. If you notice battery drain after you flash you could flash the wipe version just to make sure. anyways, Follow Darky's instructions to the T and dont forget to thank him
After his ROM boots, I grabbed a modem for our phones (bell, sasktel) I used JK3 because the search wasn't working last night but found this morning a link to JL2....i'm not sure if this is legit JL2 because I haven't used it but give it a shot if it doesn't work flash another on top (I can confirm JK3 works)
JL2: http://forum.xda-developers.com/atta...1&d=1293577837
Grabbed that from a link Samdroid_G_S posted so thank him for that.
JK3: was from docs link located here:
http://forum.xda-developers.com/showthread.php?t=846237&highlight=bell
you can thank him for that. I used JK3 because of the issues JK4 was causing. I wouldn't use JK4 but that' up to you.
again you can use either odin or CWM to flash the modem. once you flash the modem you should be able to register on the network. you might not have internet, so you will need to go in and edit your access point name. Located in your phone here:
Settings | wireless and network | Mobile Networks | access point names
If it is blank click the menu button and New APN, all you need for sasktel's is a name, can be whatever and APN, the APN should be "inet.stm.sk.ca" without the quotes. Leave everything else default and save it. you will have to click the bullet after you created it so it knows to use it. should be good after that. For bell just do a quick google search for bell apn or bell access point name, i'm sure someone has posted on xda also.
I am not responsible if you brick your phone, this is entirely on you if that happens.
Thanks man
That's what I have been looking for . A step by step tutorial how is the rom working for you I will give it a shot . I hope sd card Won't die on me again .I can deal with other problems but what could u do when sd card dies
on u .Thanks!
Hey no problem, by default the voodoo lag fix is disabled but honestly you won't need it.....
Sent from my GT-I9000 using XDA App
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
adamge said:
Nice, one of the great posts ever on xda. Is there any advantage to running darky's ROM? My SGS on JL2 has been good, and battery life seems awesome now that I turned off automated email checking.
Click to expand...
Click to collapse
Pretty much preference I guess. I love Darky's ROM but JL2 was good, Darky's seems faster it's built upon 2.2.1 and I read Samsung did some kernel upgrades so that's why it's faster. If you do try it out just make sure you can get into recovery and download mode first.
i can confirm that Darkys rom works, I'm running 7.6 atm. I did notice that the APN settings in my original settings were missing ports numbers for data.
I tried this and it did not work, I still don't have data connection and I am on Bell canada.
Are u still getting text's? If so then you are registered on the network, all you have to do is go into your access point names and create an entry, then highlight it after it's saved. See my post above
Sent from my GT-I9000 using XDA App

[Q] [SOLVED(ATT problem)] Poor mobile data performance

I have a couple captivates and one works great but the others mobile data performance has become terrible. It was great yesterday but sometime around me flashing a new speedmod kernel and the ZNKP1 modem. I have been flashing different roms, kernels, and modems to no avail. I tried phoenix, serendipity, paragon, and dorian ROMs with speedmod and glitterball kernels and JK3, JK4, JL2, and JL3 modems. Nothing really seems to effect the performance. I have tried both the WCDMA 850 and 1900 bands but both perform badly. It shows that it is connected to HSDPA. I can keep a connection perfectly fine but no matter what I have tried I can't get decent performance. When I run speedtest the meter will jump up a bit freeze drop slowly go up and it will repeat the process giving me about 500-700 down and anywhere below 1000 down. The other captivate can achieve consistent 2600 down and 1300 up.
I am a bit worried that something may be wrong with my phone. Does anyone know what could be wrong?
SOLVED
I switched the sim cards and each phone performed opposite. It is obviously an AT&T problem.
Well looking @ all the different variations that you've tried have you found one that you like?
I recommend finding one that your happy with and then flash to stock and install just the package that you're most satisfied with.
Flashing all those Kernels/Modems could have caused an issue in some sense. If you havn't returned to stock in between them
Been flashing back to stock in between all ROMs and have done master clear everytime. Will try to load a modem to the stock ROM and see what happens. Thanks.
laz0r said:
Been flashing back to stock in between all ROMs and have done master clear everytime. Will try to load a modem to the stock ROM and see what happens. Thanks.
Click to expand...
Click to collapse
What ROM & Modem are you running now?
Just flashed back to stock and tested with poor results, a ping of 999+ and 300 down 200 up(was also getting poor reception on stock 2 bars) . I am currently in the process of flashing to Phoenix 3.5.
I am now running Cognition 3.0.2 with Firebird 2 Kernel and JL3 modem. The problem is still there just ran the same test on both phones good one: 2000 down 1300 up 130 ping bad one : 900 down failed on upload 300 ping

Bell 850 Band Selection with Darky's rom

I installed Darky's 9.3 rom and believe I may have lost the 850 band for the Bell Canada network. Is there a modem I can safely flash and has anyone else had this issue?
Flash jl2 it's the best one so far, you might have to manually input the access point name....i started with darky's rom's and had to do this every time....that might be resolved by now so start with jl2 and see how it goes!
Sent from my GT-I9000 using XDA App
spectre85 said:
Flash jl2 it's the best one so far, you might have to manually input the access point name....i started with darky's rom's and had to do this every time....that might be resolved by now so start with jl2 and see how it goes!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for your reply. Did you do this with 9.3 with no issues? Could you point me to the right link so I don't mess this up or is it simply JL2 under the modem thread?
No I haven't done it with his 9.3 but you can just flash the file, unfortunatly I don't have the file as I'm on my phone and not near a computer but post in his thread and ask for the jl2 modem.zip that you can flash in recovery....someone will post
Sent from my GT-I9000 using XDA App
Here you go.
How do you install this, flash it in recovery/CWM?
Freija said:
How do you install this, flash it in recovery/CWM?
Click to expand...
Click to collapse
Yes. 10chars.
Thanks, just applied this and *#0011# shows me on band 850. Interestingly the GPS fix was really quick on the previous modem but didn't get a fix on this JL2. Will go see if I can clear the settings and leave it for a bit to see if it will work. Prior to Darky's Rom my GPS would never work properly either.
Thanks again.
hi there, I am having the same problem, but I flask with the attached zip file and when I go to choose WCDMA with 850, it said the menu does not exist?
anyone can help please?
Still Nothing
Hey All:
I am hoping that someone can help me here. I flashed in Darky's 9.5 rom and it looks to be going well except that I cannot get the data network to start. I am on a I9000M (Bell Canada). I can send and receive txt messages and phone calls but cannot get the data network to start. I have flashed in the Update JL2 modem from above and when the phone boots I can see the 3G and H symbols in the notification area but then they go away. There is no wireless around but that does work. The *#0011# show that I am on WCDMA 850 Band 5, is that good?
I just flashed this last night so I really don't know what to do next. Any help would be great
TIA
drunkrob said:
Thanks, just applied this and *#0011# shows me on band 850. Interestingly the GPS fix was really quick on the previous modem but didn't get a fix on this JL2. Will go see if I can clear the settings and leave it for a bit to see if it will work. Prior to Darky's Rom my GPS would never work properly either.
Thanks again.
Click to expand...
Click to collapse
I found the the JM9 GPS code (GPS only not entire modem) loaded over JL2 modem gives me best GPS performance. Search for "gpsjm9.zip" or check http://forum.xda-developers.com/showpost.php?p=9086945&postcount=9
Im currently Running the JPG modem on my galaxy i9000m and its pretty sickk but tommorw i will be flashng back to KC1 modem..you just cant beat it! plus the gps is unbelieveably good! i highly recommend KC1 to any 850 band user

[Q] Awful Cell Reception (Bell Canada) (2.3.3 JVK) **FIXED**

Hey Guys,
I had flashed 2.3.3 JVK Gingerbread to my Canadian Bell Samsung i9000m. Since the flash my cellular signal is extremely poor. Getting 0-1 bar in places I would normally get 4-full on Froyo. With JVK the phone is extremely fast, email app has stopped constantly force closing and for the first time, gps works great! This is why I didn't just want to flash back to Froyo to fix the cell signal issue. I had been told by a member here to ensure that [8]WCDMA 850(FDD V)[*] in the band settings had a star in it. It did not, I had selected it and rebooted, star is now there with no change in signal strength.... So this is my question, am I going to have to flash back to froyo to fix this and once again live without GPS? Or is there a work-around or setting to fix signal strength. ANY help is greatly appreciated. Thanks in advance..
INFO
NA Bell i9000m Vibrant
Flashed to 2.3.3 JVK Gingerbread with Odin with new Bootloaders, no PIT/Repartition.
EVERYTHING else works perfect, except cellphone signal.
**FIXED**
Flashed the KC1 (Bell Canada Update) modem.bin via odin. I now get full signal (84dB) where I had previosly had none. (2.3.3. Modem). Gps working great. Phone still fast as hell.
Also just a follow up, I tried the JL2 modem first but gps failed to lock. Thanks for the advice though the 850mhz was the key!
No no no! Its just your modem, you can flash any modem toy like!
Go for jl2 as it is 850mhz by default.
Just find the jl2 modem. If its a zip then extract modem.bin and place in the pda section of odin. Flash away! If its a .tar file just put this straight in.
Stock XXJVK, Voodoo GB hack Kernel, JQ1 modem
thanks for the quick reply. So the modem type has nothing to do with gps?? Also, how safe is it to flash the modem from another firmware? thanks again for all the help dude.. I apologize in advance for any truly stupid questions haha..
Sent from my GT-I9000 using XDA
steve-stewart said:
thanks for the quick reply. So the modem type has nothing to do with gps?? Also, how safe is it to flash the modem from another firmware? thanks again for all the help dude.. I apologize in advance for any truly stupid questions haha..
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Yes you can use any froyo modem.
As for gps... I hear conflicting reports about that. Jl2 tho has great gps from reports.
I found jvk modem to drain heaps standby. Im guessing that without 850mhz band your phone is using a fallback band with worse reception. Ll2 should sort this out
Stock XXJVK, Voodoo GB hack Kernel, JQ1 modem
rlorange said:
Yes you can use any froyo modem.
As for gps... I hear conflicting reports about that. Jl2 tho has great gps from reports.
I found jvk modem to drain heaps standby. Im guessing that without 850mhz band your phone is using a fallback band with worse reception. Ll2 should sort this out
Stock XXJVK, Voodoo GB hack Kernel, JQ1 modem
Click to expand...
Click to collapse
So is the JL2 from 2.2.1?, as with the 2.2 Froyo, my gps was not just being slow, but not functioning at all (0 Locked sat's).
Also, where would I obtain this modem file, and how is it flashed. I ran a search and noticed that some member state it goes into the PDA field in ODIN and other stating it goes into the PHONE field. Also, I have not modified the bootloader,(Stock came with 2.3.3) and I am unsure weather it could be flashed using the update method. As this is my work phone, I need to be sure I will not brick it. Once again, sorry for all the questions, the help is GREATLY appreciated.
**EDIT**
Also, when going into the *#2263#, the 850 Band is listed in both the GSM and CDMA areas, both with a corresponding star in the box beside them. Not sure if this means the band is actually there or not. One thing I am sure of is the fact that with FROYO my signal was perfect, with GPS non existant and phone generally SLOW, with 2.3.3 EVERYTHING is working great with the exception of the cell signal strength. Speed is incredible.
Ah glad to hear you sorted it out! Being half canadian myself I was glad I helped.
Hey try this blue gingerbread keyboard
http://db.tt/eBFA0n5
Stock XXJVK, Voodoo GB hack Kernel, JQ1 modem
I Can not accept an incoming call on Samsung Galaxy S
I just recently upgraded my phone to Gingerbread, since then i have been having problem to receive an Incoming calls
when I have an incoming call, the phone does not ring or, vibrate or even show the incoming call screen. the only thing I can see is the little icon next to 3G icon on the top of the screen showing there is an incoming call and the screen will be blank. non either call accept or reject page will show instead it will show blank page and the network bar will be lost.
so I can get messages. I can dial out without a problem.
I am using Samsung Galaxy S
Can some one help me
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
Can some one help me,
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
I need instruction and right tools to download for upgrading
I need instruction and right tools to root my phone
I need instruction and right tools to flash my phone.

[Q] Just bought a captivate, No Signal is displayed and baseband version is "unknown"

[Q] Just bought a captivate, No Signal is displayed and baseband version is "unknown"
Please, I need your help, I just bought a Captivate for my GF, we live in Honduras, Central America and the phone was supposedly sent unlocked, she inserted the sim card and the phone did not asked for any code, but, it has no signal, it is currently displaying "no Service", and when she goes to look at her baseband version, It displays "unknown"!
It has a crappy ICS rom, since Im an Nexus one owner I dont know a thing about this phone version!
Can you PLEASE! help me?
Can I just flash a CM nightlie over this ****ty ICS rom?
Do I have to upgrade or downgrade anything else?
Please, any help is welcome!
I assume you probably have, but are the APN settings correct?
You can probably flash a CM7 nightly over it. Worst case, it doesn't work and you have to flash back to stock first and try again.
It sounds like you don't have a working modem. If flashing CM7 doesn't fix it, flash a CM7-compatible modem and see if that fixes it.
Sent from my SGH-I897 using xda premium
apbthe3 said:
You can probably flash a CM7 nightly over it. Worst case, it doesn't work and you have to flash back to stock first and try again.
It sounds like you don't have a working modem. If flashing CM7 doesn't fix it, flash a CM7-compatible modem and see if that fixes it.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lolz good advice...just in the wrong order...
I would flash the modem first....cause it is the least invasive (doesn't wipe anything) and most likely will work.
Roms contain modems, so if fishing as ROM didn't fix it fishing a modem after that is just spinning your wheels.
BUT, since op doesn't even like the ROM...just flash to kk4 stock.
I would also make door that the phone is actually unlocked...but aosp doesn't have the same dialer codes to just dial and check, and i don't know those.
studacris said:
Lolz good advice...just in the wrong order...
I would flash the modem first....cause it is the least invasive (doesn't wipe anything) and most likely will work.
Roms contain modems, so if fishing as ROM didn't fix it fishing a modem after that is just spinning your wheels.
BUT, since op doesn't even like the ROM...just flash to kk4 stock.
I would also make door that the phone is actually unlocked...but aosp doesn't have the same dialer codes to just dial and check, and i don't know those.
Click to expand...
Click to collapse
I agree that it is less invasive, but he already said he wanted to go to CM7 so I figured he could skip a step if the flash actually worked. He bought the phone this way so who knows what the previous owner did to it. Both ways should fix his issue though (unless his phone is locked, as you pointed out).
If you flash to the most recent nightly or a kang, the Samsung dialer codes work to check your lock status.
Sent from my SGH-I897 using xda premium
So, thank you guys for helping me, heres what I did:
A friend told me that since I had ICS on it, I had to flash a compatible modem on it, I flashed I9000BVJJPD which is used on cm9.
When it turned on, It asked for an unlock pin, I tried to generate it with the SGSunlock app but didnt worked, so I downgrade it to cm7 (2.3.7) and tried again but with no success...
Tomorrow morning Ill take it to an unlock shop so it can be unlocked (hopefully).
Does the modem that I flashed is the correct one for a network that uses 850 bands?
I heard that some captatives erased the imei causing the "unknown baseband" issue, I dialed *#06# and it retrieved the imei code so, it isnt ****ed right?
any help is welcome, Ill let you guys know how it goes.
thanks!
donchele said:
Does the modem that I flashed is the correct one for a network that uses 850 bands?
Click to expand...
Click to collapse
Yes, JPD should support 850.
apbthe3 said:
Yes, JPD should support 850.
Click to expand...
Click to collapse
Up to you, which is the best modem out there?
No such thing..every phone acts differently, not to mention the signal at your location is a huge variable we can't factor in.
studacris said:
No such thing..every phone acts differently, not to mention the signal at your location is a huge variable we can't factor in.
Click to expand...
Click to collapse
I know, but, for example, developers say that the lastest is the best, but, you only can say if you test them...
But, have you test some of them? Which gave you the best result?
I always include jk4 in my roms as a good standard.
donchele said:
I know, but, for example, developers say that the lastest is the best, but, you only can say if you test them...
But, have you test some of them? Which gave you the best result?
Click to expand...
Click to collapse
I understand your dilemma. You look at a list of 50 modems and go, "Where do I even start?"
Personally, I have tried lots of different modems, old and new, and I always come back to KP1. I think it's worth adding to your list of modems to try out. I would also try JJJV5 and KG3.
donchele said:
So, thank you guys for helping me, heres what I did:
A friend told me that since I had ICS on it, I had to flash a compatible modem on it, I flashed I9000BVJJPD which is used on cm9.
When it turned on, It asked for an unlock pin, I tried to generate it with the SGSunlock app but didnt worked, so I downgrade it to cm7 (2.3.7) and tried again but with no success...
Tomorrow morning Ill take it to an unlock shop so it can be unlocked (hopefully).
Does the modem that I flashed is the correct one for a network that uses 850 bands?
I heard that some captatives erased the imei causing the "unknown baseband" issue, I dialed *#06# and it retrieved the imei code so, it isnt ****ed right?
any help is welcome, Ill let you guys know how it goes.
thanks!
Click to expand...
Click to collapse
If the imei is still present it's good. Did you check the imei displayed is the same on the sticker under the battery?
Did you try the SGS Unlocker website with the nv_data.bin ? http://www.communityhosting.net/sgsunlock/
studacris said:
I always include jk4 in my roms as a good standard.
Click to expand...
Click to collapse
apbthe3 said:
and I always come back to KP1. I think it's worth adding to your list of modems to try out. I would also try JJJV5 and KG3.
Click to expand...
Click to collapse
Thanks, you guys rock, Ill the 3 that you mentioned here and let you know which one is my best...
Ill Compare Battery life, Reception and data...

Categories

Resources