i tried all versions cwm s but some roms gives this annoying message when i try to install my phone. i couldnt find what i do wrong. i tried to install these roms after i flashed to stock but it didnt work. pls help me . i cant try most of roms because of this problem. what should i do to fix this problem .
Related
What i did before installing a custom rom:
I rooted my phone using superoneclick method.
Then installed xrecovery V0.1. (with busybox and charm*something)
Made a backup of the original room using Xrecovery
How did i install the custom roms and what happend:
Renamde gingerxd v13 to update.zip and place it on sdcard.
Wiped cache and factory reset(fullwipe).
Install update.zip with Xrecovery.
(after my first attemp failed, i tried to wipe cache and factory reset after installing the room too)
Reboot phone.
Phone goes into reboot loop. First sony ericsoon, then the logo of whatever custom room i'm trying to install.
I tried the MiniCM7-2.0.7 (source)
Then i tought, what if i downloader a back from another phone? i got Floyo 2.2.5 (source)
Restoring this backup too got me into a reboot loop.
Final question(and probably the supidest one if the answer is yes)
Do i need to unlock the bootloader to install a custom room? The guides i used didn't mention it at all, and since it may brick my device beyong xrecovery's help i'd like a straight answer before attempting it.
I tried to make this post as clear as possible and maybe someone can point out if im missing something.
Very important thing: Did your baseband end with 015? If no, that's why you are having these problems.
And no, you don't need to unlock the Bootloader to install Custom Roms.
It ends in 006. Thanks ill be reading on flashing a baseband and report back. PCcompanion says my phone is up do date so i'll be using this. If you have a better alternative let me know.
^^
Edit: Is there a way to configure pcc to make the update for me? Like say im from another country were the update is available?
Use Flashtool, go here
Thanks Chris95X8. my phone is now running 2.3.5 gingerdx rom. everything works. The only thing that's driving me nuts is the notification i get when i lose signal. Any way to fix this?
Sadly it didnt work for me... I have tried out flashing basebands but it wont work. still looping around. makes me crazy.
Kiwiii97 said:
Sadly it didnt work for me... I have tried out flashing basebands but it wont work. still looping around. makes me crazy.
Click to expand...
Click to collapse
Are you sure that you flashed the right baseband?
If you have, maybe try to boot phone without the SD card in it..
Hi guys,
I have a serious problem,
Ics rom was not working properly so I lost the root.
Ok, but then I tried to install over pc Odin some older stock roms and guess what?The installation was ok but when the system starts I get stuck and for all FC,,,so i cant do nothing i cant root again and use my backups from recovery.
What i to do guys?
Please help
I try couple roms to back on Gingerbread but allways the same.
TNX
dzontra11 said:
Hi guys,
I have a serious problem,
Ics rom was not working properly so I lost the root.
Ok, but then I tried to install over pc Odin some older stock roms and guess what?The installation was ok but when the system starts I get stuck and for all FC,,,so i cant do nothing i cant root again and use my backups from recovery.
What i to do guys?
Please help
I try couple roms to back on Gingerbread but allways the same.
TNX
Click to expand...
Click to collapse
Enter Recovery mode . and do Wipe/factory Reset & Wipe cache.
Hi,
Yesterday when I tried to upgrade to RR v6 my note didnt want to boot correctly.
After I performed a full wipe with Abyss redpill, and installed rocket rom. When my note boots again it goes to recovery and constant reboots.
After alot of reading and trying out different recomendations I installed a GB rom first one w/o root. After one with root. In gb my phone boots and works.
When I install ics (tried stock and rr6) my phone doesnt get past the samsung galaxy note screen. Im able to go to download and install GB again. Tried alot of times now to install a ICS rom and allways same bug.
Any good tips ?
Try installing KL3 via PC Odin....root your phone and try installing ics after doing all 3 wipes....if it still won't work...go to alliance from ics ...and follow all the steps given by Robbie...
serphentos, check this out: http://forum.xda-developers.com/showpost.php?p=27467589&postcount=3716
I had same problem.. tried the above solution and it worked great.
dbchoong said:
serphentos, check this out: http://forum.xda-developers.com/showpost.php?p=27467589&postcount=3716
I had same problem.. tried the above solution and it worked great.
Click to expand...
Click to collapse
Thanks this solved my problem aswell
Hi,
searched for a while but couldnt find the answer. So Ive flashed new recovery to S5830 - CWM 5.0.2.6 . I did backup of current rom (it was stock i guess). Then i flashed custom CM10.2 rom: http://forum.xda-developers.com/showthread.php?t=2435716. And everything worked fine. But now Ive changed my operator and Ive found that my pin doesnt work (im sure pin is ok). Phone was branded so i guess thats simlock . I read some threads and i got code from bml5.img file but I also read that it doesnt work with custom rom so i tried to restore to my stock rom. Restoring works (no errors) but it stops at Samsung logo. I did wipe data/factory reset but still its not working. Ofc I can go back to my current rom by restoreing it but that still doesnt fix my pin problems. Any suggestions what should I do with boot loop ? Or any other way of fixing pin problem ?
Thanks for help.
p.s. Sry for my english, tried to do my best ;o
Kam12 said:
Hi,
searched for a while but couldnt find the answer. So Ive flashed new recovery to S5830 - CWM 5.0.2.6 . I did backup of current rom (it was stock i guess). Then i flashed custom CM10.2 rom: http://forum.xda-developers.com/showthread.php?t=2435716. And everything worked fine. But now Ive changed my operator and Ive found that my pin doesnt work (im sure pin is ok). Phone was branded so i guess thats simlock . I read some threads and i got code from bml5.img file but I also read that it doesnt work with custom rom so i tried to restore to my stock rom. Restoring works (no errors) but it stops at Samsung logo. I did wipe data/factory reset but still its not working. Ofc I can go back to my current rom by restoreing it but that still doesnt fix my pin problems. Any suggestions what should I do with boot loop ? Or any other way of fixing pin problem ?
Thanks for help.
p.s. Sry for my english, tried to do my best ;o
Click to expand...
Click to collapse
Can you try flashing your stock rom again using odin? That should solve it. Do post the result. Hope I Helped
Oh god I'm gonna shot myself. Well flashing by odin worked (I downloaded rom and .ops from sammobile becouse CWM backup (nandroid backup) is not supported by odin). It didnt work at beginning but i've wipe data in recovery and it worked fine... BUT then i read on other sites that this whole "pin" that phone asked me about on CM 10.2 was just unlock code i've get from bml5 file... so whole flashing was just unnessesary.. I feel so stupid lol. Posted this if someone would get similar problem.
Kam12 said:
Oh god I'm gonna shot myself. Well flashing by odin worked (I downloaded rom and .ops from sammobile becouse CWM backup (nandroid backup) is not supported by odin). It didnt work at beginning but i've wipe data in recovery and it worked fine... BUT then i read on other sites that this whole "pin" that phone asked me about on CM 10.2 was just unlock code i've get from bml5 file... so whole flashing was just unnessesary.. I feel so stupid lol. Posted this if someone would get similar problem.
Click to expand...
Click to collapse
You always learn something new everyday
Hi,i have a problem installing CWM on my phone.I need it cos i want to put a custom rom on my phone.
1.I have official 4.1.2
2.I have rooted the phone
3.I unlocked the bootloader
I installed rom manager and flashed cwm through that and every time i enter cwm i dont have an option to go to external storage,and i cant confirm or pick anything using the power button.
Does anyone have any solution to this problem?
Or an idea on how i can fix this? I tried installing it over and over again ,i even downgraded my phone and started over but nothing worked.
Thanks in advance
cimston said:
Hi,i have a problem installing CWM on my phone.I need it cos i want to put a custom rom on my phone.
1.I have official 4.1.2
2.I have rooted the phone
3.I unlocked the bootloader
I installed rom manager and flashed cwm through that and every time i enter cwm i dont have an option to go to external storage,and i cant confirm or pick anything using the power button.
Does anyone have any solution to this problem?
Or an idea on how i can fix this? I tried installing it over and over again ,i even downgraded my phone and started over but nothing worked.
Thanks in advance
Click to expand...
Click to collapse
Please read this thread:
http://forum.xda-developers.com/showthread.php?t=2298420
If you proceed like there all will be fine. Is no room for errors...