Here is a radio from the recent Orange OTA. I've not tested it. The version was 4.4.20 not sure what the radio version is. Should work on both ATT and international. It's a French version radio so if your network is similar to theirs, this might help connectivity?
For International trolls
Use at your own risk, download here.
Click to expand...
Click to collapse
For ATT trolls
Use at your own risk, download here. -does not work yet
Click to expand...
Click to collapse
Would be fine to use this with the 4.5.91 att rom from kenn?
Sent from my MB860 using XDA Premium App
Masta_mind257 said:
Would be fine to use this with the 4.5.91 att rom from kenn?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
It looks to me like the .sbf is for international users? Will check and post an AT&T one in a few hours unless the2d beats me to it and updates his OP
Not working on Telstra Atrix
But it didn't break my phone, still starts which i am glad of!
The log might be hard to read, i tried it a few times. Hope this helps:
Code:
07/16/11 13:05:41 --------------------------------------------------------------------------------
07/16/11 13:05:41 New Log Started For Software Download.
07/16/11 13:05:46 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:46 00000768 Phone.cpp 1601 0 ERROR GetPhoneID failed: ERROR.
07/16/11 13:05:49 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:49 00000768 Phone.cpp 1601 0 ERROR GetPhoneID failed: ERROR.
07/16/11 13:05:49 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:49 00000768 Phone.cpp 1696 0 ERROR GetTechnology failed: ERROR.
07/16/11 13:05:49 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:49 00000768 Phone.cpp 1764 0 ERROR GetSoftwareVersion failed: SendTC failed: ERROR.
07/16/11 13:05:49 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:49 00000768 Phone.cpp 1922 0 ERROR GetSoftwareFlexVersion failed: ReadSeemElement failed: ERROR.
07/16/11 13:05:49 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:05:49 00000768 Phone.cpp 1811 0 ERROR GetDRMVersion failed: SendTC failed: ERROR.
07/16/11 13:06:40 The FlashLog key is turned off.
07/16/11 13:06:43 Multi upgrade started for 1 phones
07/16/11 13:06:43 [Device ID: 0] Flashing phone.
07/16/11 13:07:11 ERROR: Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN - on device ID 0.
07/16/11 13:07:11 ERROR: Flash failure: Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN (Error Code: e0020014),
Detailed Error Details: Direction of the Error=3000, Command Value=300000, Code Group Number=5 - on device ID 0.
07/16/11 13:07:11 [Device ID: 0] Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN
07/16/11 13:07:11 Multi upgrade finished.
07/16/11 13:07:31 Multi upgrade started for 1 phones
07/16/11 13:07:31 [Device ID: 0] Flashing phone.
07/16/11 13:07:33 ERROR: Phone[0000]: Phone is not compatible with multi-interface super-file. - on device ID 0.
07/16/11 13:07:33 ERROR: Flash failure: Phone[0000]: Phone is not compatible with multi-interface super-file. (Error Code: 3b),
Detailed Error Details: Direction of the Error=No Direction, Command Value=0, Code Group Number=No Codegroup - on device ID 0.
07/16/11 13:07:33 [Device ID: 0] Phone[0000]: Phone is not compatible with multi-interface super-file.
07/16/11 13:07:34 Multi upgrade finished.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1601 0 ERROR GetPhoneID failed: ERROR.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1601 0 ERROR GetPhoneID failed: ERROR.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1696 0 ERROR GetTechnology failed: ERROR.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1764 0 ERROR GetSoftwareVersion failed: SendTC failed: ERROR.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1922 0 ERROR GetSoftwareFlexVersion failed: ReadSeemElement failed: ERROR.
07/16/11 13:08:03 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:03 00000768 Phone.cpp 1811 0 ERROR GetDRMVersion failed: SendTC failed: ERROR.
07/16/11 13:08:09 Multi upgrade started for 1 phones
07/16/11 13:08:09 [Device ID: 0] Flashing phone.
07/16/11 13:08:26 ERROR: Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN - on device ID 0.
07/16/11 13:08:26 ERROR: Flash failure: Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN (Error Code: e0020014),
Detailed Error Details: Direction of the Error=3000, Command Value=300000, Code Group Number=5 - on device ID 0.
07/16/11 13:08:26 [Device ID: 0] Interface BP: Error flashing subscriber unit. Device API Error: 0xE0020014 Address: 0xFC00 Command: BIN
07/16/11 13:08:27 Multi upgrade finished.
07/16/11 13:08:34 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:34 00000768 Phone.cpp 1601 0 ERROR GetPhoneID failed: ERROR.
07/16/11 13:08:34 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:34 00000768 Phone.cpp 1696 0 ERROR GetTechnology failed: ERROR.
07/16/11 13:08:34 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:34 00000768 Phone.cpp 1764 0 ERROR GetSoftwareVersion failed: SendTC failed: ERROR.
07/16/11 13:08:34 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:34 00000768 Phone.cpp 1922 0 ERROR GetSoftwareFlexVersion failed: ReadSeemElement failed: ERROR.
07/16/11 13:08:34 00000768 Phone.cpp 464 0 ERROR Generic failure when sending command.
07/16/11 13:08:34 00000768 Phone.cpp 1811 0 ERROR GetDRMVersion failed: SendTC failed: ERROR.
Those .sbfs be broke
I just posted a CWM for the Orange FR 2.3.4 radio:
CWM file for radio: ORFR 2.3.4 radio CWM
This should work. Baseband version is N_01.100.00R
This won't fix the international users with 3G/H+ data issues on Orange 2.3.4, you need to use the /system/lib/libmoto_ril.so from AT&T 4.5.91 for that.
Both radio CWM and fix also in my thread
eval- said:
I just posted a CWM for the Orange FR 2.3.4 radio:
CWM file for radio: ORFR 2.3.4 radio CWM
This should work. Baseband version is N_01.100.00R
This won't fix the international users with 3G/H+ data issues on Orange 2.3.4, you need to use the /system/lib/libmoto_ril.so from AT&T 4.5.91 for that.
Both radio CWM and fix also in my thread
Click to expand...
Click to collapse
I can confirm the CWM radio from Eval- works fine on my Telstra Atrix.
eval- said:
I just posted a CWM for the Orange FR 2.3.4 radio:
CWM file for radio: ORFR 2.3.4 radio CWM
This should work. Baseband version is N_01.100.00R
This won't fix the international users with 3G/H+ data issues on Orange 2.3.4, you need to use the /system/lib/libmoto_ril.so from AT&T 4.5.91 for that.
Both radio CWM and fix also in my thread
Click to expand...
Click to collapse
Will this CWM work on an AT&T model?
Beg your pardon sir but are you referring atrix users as trolls ?
You, sir Troll, are a legit Troll.
Related
help me error message rsd lite flashing error
iam used Droid a855 and bootloader 2c7c FRG32D
Code:
08:13:04, March 09, 2011
Line: 527
ERROR: AP Die ID: 1a90011715680304000000002400
08:13:04, March 09, 2011
Line: 534
ERROR: BP Die ID: 0000000000000000000000000000
08:13:04, March 09, 2011
Line: 541
ERROR: AP Public ID: ffffffffffffffffffffffffffffffffffffffff
08:13:04, March 09, 2011
Line: 548
ERROR: BP Public ID: 0000000000000000000000000000000000000000
08:20:33, March 09, 2011
Line: 962
ERROR: Interface BP: Error sending RAM download for bootloader. Device API Error: 0xE003003F Address: 0x152000 Command: ADDR
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\RDLOp.cpp
Device ID: 0
08:20:33, March 09, 2011
Line: 1190
ERROR: Phone[0000]: Flash failed.
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\PST_FP_FlashThread.cpp
Device ID: 0
08:20:33, March 09, 2011
Line: 597
ERROR: Flash failure: Interface BP: Error sending RAM download for bootloader. Device API Error: 0xE003003F Address: 0x152000 Command: ADDR (Error Code: e003003f),
Detailed Error Details: Direction of the Error=2000, Command Value=200000, Code Group Number=257
File: D:\GitProjects2\hdt_windows_flash\flash\code\flashdll\FlashHdlr.cpp
Device ID: 0
and now restart the phone normal but cannot flashing the prl
I am Having Same issue. Phone Keeps failing. tried on Multiple computers and multiple os's (Windows 7 32/64, ubuntu) nothing seems to work. Only thing I have done to phone is Adeo (REDUX) and Superuser.
Now I want to go to 1.5.7 and I can not. I am attempting to flash back to vanilla 1.2.6 and am getting this error. ANY help with this would be greatly appreciated!
Been at this for a week now
BTW, Mine in an Atrix (AT&T) but same issue
I converted back to ext3 with BackToEXT3 by Paul but didn't realize I needed to restore a new image right away. Instead I shut down the phone to use SmartFlash. Smartflash doesn't find the phone though and the phone doesn't boot anymore (ie. no logo, no recovery, no nothing).
If I try NVFLASH to restore the phone I get the following error message:
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
42003 (0x42003) flags: 0
Full log below, appreciate any help I can get.
Code:
nvflash.exe --bct E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct --se
tbct --odmdata 0xC8000 --configfile android_fastboot_emmc_full.cfg --create --bl
fastboot.bin --go
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x028841484340d557
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
sending file: E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct
- 4080/4080 bytes sent
E1108_Hynix_512MB_H8TBR00U0MLR-0DM_300MHz_final_emmc_x8.bct sent successfully
odm data: 0xc8000
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
[B]failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
42003 (0x42003) flags: 0 [/B]
My O2X is laying as dead weight on my bookshelf at the moment. I think today I must send it in for repairs before it (or me) gets suicidal. If anyone has any advice to offer on this problem I will send you gingerbread cookies.
You should ask Paul from MoDaCo. Either via Twitter or his forum.
Hi,
Since about 4.4.3 (possibly 4.4.2?) wifi-tethering broke.
logcat says:
Code:
D/AFWall ( 3615): OS reported AP state change: 11 -> 12
D/AFWall ( 3615): isWifiApEnabled is false
E/SoftapController( 1320): Cannot update "/data/misc/wifi/hostapd.conf": Permission denied
E/WifiStateMachine( 1837): Exception in softap start java.lang.IllegalStateException: command '79 softap set wlan0 AndroidAP broadcast 6 wpa2-psk [scrubbed]' failed with '400 79 SoftAP command has failed'
E/SoftapController( 1320): SoftAP is not running
D/SoftapController( 1320): Softap fwReload - Ok
D/SoftapController( 1320): Softap fwReload - Ok
D/dalvikvm( 3615): GC_CONCURRENT freed 390K, 11% free 12321K/13772K, paused 4ms+1ms, total 18ms
I/AFWall ( 3615): Now assuming 3G connection (non-tethered)
E/SoftapController( 1320): Cannot update "/data/misc/wifi/hostapd.conf": Permission denied
E/WifiStateMachine( 1837): Exception in softap re-start java.lang.IllegalStateException: command '83 softap set wlan0 AndroidAP broadcast 6 wpa2-psk [scrubbed]' failed with '400 83 SoftAP command has failed'
D/AFWall ( 3615): OS reported AP state change: 12 -> 14
D/AFWall ( 3615): isWifiApEnabled is false
This bug is reported on code.google.com but the only suggested solution is deleting /data/misc/wifi and reboot which didn't work for me.
I even chmoded 777 /data/misc/wifi and hostapd.conf but without any success.
I'm running a very recent nightly (a few days old).
Any thoughts?
Thank you.
Ducati errors on OMAP CPU based machines running marshmallow
I've tried 2 Marshmallow releases for OMAP based CPU's
The Kindle Fire 7 HD Resurrection Remix
and
the Nook Tablet Official CM13
they are both awesome releases , but IMO really miss being commercial quality for 1 big thing
native screencasting to a chromecast doesn't work
Some chromecast enable apps work fine, others dont, and its hunt and peck for workarounds
logcats on both units return similiar results
Are there any TI/OMAP experts left in the wild?
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
D DOMX : hardware/ti/omap4/domx/omx_proxy_component/omx_video_enc/src/omx_h264_enc/src/omx_proxy_h264enc.c:511 LOCAL_PROXY_H264E_GetParameter()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x80001006 - Error in Proxy GetParameter
E OMXNodeInstance: getParameter(40:TI.DUCATI1.H264E, ParamConsumerUsageBits(0x6f800004)) ERROR: NotImplemented(0x80001006)
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
E ACodec : Encoder could not be configured to emit SPS/PPS before IDR frames. (err -1010)
E ACodec : [OMX.TI.DUCATI1.VIDEO.H264E] configureCodec returning error -1010
E ACodec : signalError(omxError 0xfffffc0e, internalError -1010)
E MediaCodec: Codec reported err 0xfffffc0e, actionCode 0, while in state 3
E MediaCodec: configure failed with err 0xfffffc0e, resetting...
I OMXClient: Using client-side OMX mux.
I Converter: We going to manually prepend SPS and PPS to IDR frames.
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
D DOMX : hardware/ti/omap4/domx/omx_proxy_component/omx_video_enc/src/omx_h264_enc/src/omx_proxy_h264enc.c:511 LOCAL_PROXY_H264E_GetParameter()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x80001006 - Error in Proxy GetParameter
E OMXNodeInstance: getParameter(41:TI.DUCATI1.H264E, ParamConsumerUsageBits(0x6f800004)) ERROR: NotImplemented(0x80001006)
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
W ACodec : do not know color format 0x7f000789 = 2130708361
I ACodec : setupVideoEncoder succeeded
D DOMX : hardware/ti/omap4/domx/domx/omx_proxy_common/src/omx_proxy_common.c:1955 PROXY_GetExtensionIndex()
D DOMX : ERROR: failed check: (eError == OMX_ErrorNone) || (eError == OMX_ErrorNoMore) - returning error: 0x8000101a - Error returned from OMX API in ducati
@transi1 Do you think this is possible?
This is the message I get when running tpdebrick.. The process works with my other tablets so i think the process and cabling are good? Is there anything that can be done?
[email protected]:~/Downloads/tpdebrick-v004$ sudo ./tpdebrick 32
checking doc files ...
Connect Touchpad then hold Power+Home+VolumeDown for 30 seconds ...
QDL mode not found
Aborting.
another one with different issues/fixable either?
Executing file...
Checking QDL mode...
Writing file tz.mbn ...
Sending MAGIC...
MSG: Qfprom Fuse List: Blowing FAILED
MSG: Failed Fuse addr:
MSG: 0x00000000
MSG: Error Status:
MSG: 0x00000000
Sending secureMode...
Sending openMulti ...
MSG: Open multi failed, unknown error
ERROR: Open multi failed, unknown error
Invalid openMulti response.
Cannot write file tz.mbn
Aborted.