Howdy,
I've been using the CM7 nightly builds for a while now and figured it'd be nice to have a kernel that's based on CM7 with overclocking, RAM hack and couple of other tweaks. This kernel is pretty similar to the volkKernel but I wanted to have my own
Changes:
* Overclocking up to 1500 mhz (only through pimp my cpu at the moment)
* Default I/O scheduler of NOOP
I'll try to keep it up to date with the latest CM7 kernel sources.
[Releases]
Third release based on nightly #114
http://www.mediafire.com/?r57gqyuvhujwk6g
Second release based on nightly #101
* Removed RAM hack
* Balanced out the CPU clock values a little bit
http://www.mediafire.com/?1waipap3c71hat3
Initial release based on nightly #79
http://www.mediafire.com/file/w3e0s3vxwtznclz/cm7_79.zip
very nice welcome on board ^^
fallout0 said:
Howdy,
* Overclocking up to 1500 mhz (only through pimp my cpu at the moment)
Click to expand...
Click to collapse
Can't use setcpu?
i would like to use OC via CMParts ^^
Hmmm pardon me for asking, but why is it a 32mb RAM hack now instead of 64mb? Is it to resolve the gallery bugs?
I am using the original cpujauste o/c code that's why it only works with pimp my CPU. ill look into the others tomorrow to get that working
The 64mb hack caused issues for people with 1080p recording and the gallery. ill try it again and see how it works
ok, i found some bugs.
1. Reboot doesn't work. I guess thats because of the 32MB Ram Hack (for the vorkkernal, reboot doesn't work either)
2. After running a couple of hours, you only get around 50% of your CPU performance. Maybe the scheduler isn't optimized well. I recognized it by playing n64oid and it has lagged. Also I only get 3900 points at Antutu instead of ~5000 points.
ranrick said:
ok, i found some bugs.
1. Reboot doesn't work. I guess thats because of the 32MB Ram Hack (for the vorkkernal, reboot doesn't work either)
2. After running a couple of hours, you only get around 50% of your CPU performance. Maybe the scheduler isn't optimized well. I recognized it by playing n64oid and it has lagged. Also I only get 3900 points at Antutu instead of ~5000 points.
Click to expand...
Click to collapse
I think it's actually booting at ~700mhz by default so unless you set it up in pimp my cpu it'll stay at ~700 mhz. Probably why it's lagging.
We need more people working on kernels, thanks for doing so. Any improvements on battery life? Personally I find CM7 battery life to be pretty bad.
fallout0 said:
I think it's actually booting at ~700mhz by default so unless you set it up in pimp my cpu it'll stay at ~700 mhz. Probably why it's lagging.
Click to expand...
Click to collapse
Yep, now running with 1ghz again ^^
Can i request Voodoo Sound support?
Hey fallout0,
Nice work mate.
I think the general consensus is to not have the 64mb hack in kernels judging from a couple of poles about only 20% wanting the hack, probably less now.
I prefer to not have the hack at all imho, far too many instabilities for zero gain that being said I have yet to find a completely stable o/c kernel to use - stock seems to be the only completely stable kernel.
Be trying yours later on today so keep up the good work!
-smc
somemadcaaant said:
Hey fallout0,
Nice work mate.
I think the general consensus is to not have the 64mb hack in kernels judging from a couple of poles about only 20% wanting the hack, probably less now.
I prefer to not have the hack at all imho, far too many instabilities for zero gain that being said I have yet to find a completely stable o/c kernel to use - stock seems to be the only completely stable kernel.
Be trying yours later on today so keep up the good work!
-smc
Click to expand...
Click to collapse
Hey
Cheers
The ram hack and even overclocking support are pretty nasty hacks. Having said that I like the ability of adjusting voltages/maximum frequencies and until there is a better solution I think it's worth having this one
I agree about the RAM hack. I tried volkKernel and besides the reboot issue I didn't have any problems with the 32mb RAM hack. However the extra 32mb of RAM might not even be that useful.
I'll see how things pan out with this one then remove/add things as people complain
fallout0 said:
Hey
Cheers
The ram hack and even overclocking support are pretty nasty hacks. Having said that I like the ability of adjusting voltages/maximum frequencies and until there is a better solution I think it's worth having this one
I agree about the RAM hack. I tried volkKernel and besides the reboot issue I didn't have any problems with the 32mb RAM hack. However the extra 32mb of RAM might not even be that useful.
I'll see how things pan out with this one then remove/add things as people complain
Click to expand...
Click to collapse
Can't the reboot issue be easily resolved? According to RC, the bootloader expects the reboot-information to be at 128MB + 11 bytes, while the system writes it to [MB Reserved for Graphics]+11 bytes. As long as no ram-hack is applied, it'll of course be in the right place. Shouldn't it be easy for a kernel to just copy what is at [MB RESERVED]+11 to [128MB]+11 before shutdown?
Just talking by the seat of my pants here, haven't looked at any of the sourcecode, but it certainly feels feasible.
::Trym
I wish for that kernal:
- option on 32mb hack
- AVP/SD ram OC
- CMPart OC settings
thats it ^^
He-hey!))) This kernel is almost burnt my phone off.... Came upstairs after the dinner and found the phone off and very-very hooot... So, now I'm waiting for it to cool down a bit... Hope it'll turn on again)))
Update: Thank God that it didn't turn into BRICK))) Came on again and I've flashed it back to vorkkernel.
I am using MIUI ROM.
Very good works!! I have now tested with CM7 ROM "nightly full-77" version.
Fantastic Quadrant Score!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TrymHansen said:
Can't the reboot issue be easily resolved? According to RC, the bootloader expects the reboot-information to be at 128MB + 11 bytes, while the system writes it to [MB Reserved for Graphics]+11 bytes. As long as no ram-hack is applied, it'll of course be in the right place. Shouldn't it be easy for a kernel to just copy what is at [MB RESERVED]+11 to [128MB]+11 before shutdown?
Just talking by the seat of my pants here, haven't looked at any of the sourcecode, but it certainly feels feasible.
::Trym
Click to expand...
Click to collapse
I thought about it, and decided against it. Writing random information into active RAM is never a good idea.
so far so good with this kernel on RC1...
we want more OC !!!
moooooooore!
Related
http://board.teamwhiskey.com/viewtopic.php?f=3&t=53&start=0
Project is simple in design and is a work in progress, overclock as far as we can go with ample supplied voltage for maximum stability. These are the screenshots taken last night from the last few builds of the evening, were up to something like 40 builds so far trying to get everything just the way we want it to run, look, and feel.
Currently we are overclocking both the GPU and CPU using both base frequency modifiers and multipliers. This is allowing us to directly push the GPU to its stable limit while adjusting out the CPU accordingly.
Project Developers
Morfic and Viralblack of Team Whiskey. This is and will continue to be Morfic's baby until the phone prints money and/or can transform into a jet.
The Short and Long term goals are the following:
-To optimize the kernel with the best toolchains available to us
-Inject vital code enhancements for stability and to extend the feature set of the SGS Vibrant line
-To determine Min/Max Voltage, Bus Clock, and Multiplier values for Maximum Overclock and Maximum Effecient Overclock
-Continue to push the GPU to its theoretical maximum independant of CPU clock values.
Target Numbers and Current Results.
CPU Target 2.0GHz, Current Maximum Overclock 1.6 Stable (Time limitation only, havent rebuilt to try more)
GPU Target 85 FPS Stable Bench, Current 78 FPS
At current this is a JFD Stable build thats more than fairly bulletproof on battery life. To use with JI6 builds just flash Eugene's JFD/JI6 support package.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is NOT a hoax or scam, these are real DDMS screenshots from the build currently in progress, as it has not yet been released we do not have code or kernels available until we know its running smoothly. The following zImage is a prerelease alpha. Its strictly for proof of concept. This kernel is mildly optimized and includes the CPU and GPU overclocks. In three of three test phones the CPU was stable, in two of three phones the GPU was stable. One test phone was not able to complete neocore under this coding.
Battery life has proven about the same as traditional OC/UV kernels. This is NOT our finished product, this is an Alpha for proof of concept for other developers. Run at your own risk. There is no failsafe, this does not require SetCPU to engage. It comes out of the box at 1.6GHz with steppings of 1,2,4,8,16
Currently, tested incorporations with the zMod have shown that overclocking renders the zMod unstable and bricks the device. I personally preferred to use RyanZAs OCLF v2.2 APK.
I had one out of 20 quadrant runs fail because I switched scheduler away from deadline. CFQ proved to be less stable for one reason or another when running quadrant.
This thread will be updated as work progresses, Do not flash this if you do not know what youre doing. Suggestions are welcome for integrated features you would like to see in this kernel, we will not however be fielding bug reports as this right now is staged as a Prerelease Alpha or RC0.
If when this is flashed your phone crashes and is unable to work, my suggestion is odin the stock kernel back in place and wait for a lighter overclock version to be released.
Download -
Removed while core is being rewritten
EDIT 10/28:
To update the project and to iterate why the download link was removed, the kernel seems to be misbehaving and we havent yet nailed down the correction as of yet.
As many people pointed out once it was released, the kernel seems to slow down 3D graphics. With this information and taking a day to go through all the options and data available to me, we discovered this issue isnt limited to just 3D graphics.
Imagine if you were running at 10MPH, and while you were running time slowed down but the slowdown didnt effect you. So youre still running at 10MPH but to the rest of the slowed down world, now youre running at 15MPH, even though your speed and direction havent changed.
The changes in the code for one reason or another arent playing nice with the Android system. Instead of pushing the clock up, in most cases, what its doing is simply slowing the internal clock down to the tune of about 30%. This is what is actually providing the benchmark gains that were being recorded, not an actual gain. This doesnt mean that the project is dead, we are recompiling to get a stable overclock with the new configurations. This doesnt mean the project was a failure, it just means we need to rewrite the alpha.
Edit 10/30 -
So, we are having distinct issues removing the timing error from the kernel while maintaining the integrity of the time system. So, being that the timing is much more important, we began rewriting it all from scratch. This is currently marked as Project Core in the same forums. Core is taking the best of the overclocking and fine tuning that this kernel has and combining it with energy effeciency and stability a daily driver phone needs.
So, we will be balencing the high end power thats desired and the low power use that is needed in this new project. With that being said, I dont believe that 1.6GHz (in my own humble opinion) is even remotely necessary for 99 percent of phone, let alone for daily use. This project is being succeeded by Core to make a power friendly daily driver kernel.
The kernel will still be available from the forums Alpha/Beta Download Section, but will not be supported as its being replaced by Core.
We found the redline Now we need to find the happy medium. If you enjoyed this release, youll love Core and Core with zMod.
Thread Locked until release, OP PM me when you want to release it
Good work TW
You guys should start working on a 2.2 version (Once you get this one smooth)
Thanks, but....
The processor already gets too hot at 1ghz.
I don't feel like cooking it just to say "hey wow, look how high I pushed it before it died".
Y'all really need to let people know that overclocking creates more heat and in the confined area of a tiny little cellphone there is next to zero cooling.
It's just asking for trouble.
Not that I don't appreciate the effort you guys are putting into the tweaks tho....
n2ishun said:
Thanks, but....
The processor already gets too hot at 1ghz.
I don't feel like cooking it just to say "hey wow, look how high I pushed it before it died".
Y'all really need to let people know that overclocking creates more heat and in the confined area of a tiny little cellphone there is next to zero cooling.
It's just asking for trouble.
Not that I don't appreciate the effort you guys are putting into the tweaks tho....
Click to expand...
Click to collapse
My phone never gets hot?
But they did put a warning, and you are the one modding your device.
Oh wow! This is great! I have an Epic 4g, will I be able to benefit from this awsome project?
Eazail70x7 said:
Oh wow! This is great! I have an Epic 4g, will I be able to benefit from this awsome project?
Click to expand...
Click to collapse
Hopefully yes, the kernel will be ported to all SGS Variants if possible, Right now we have in our possession Vibrants and Captivates, were looking to expand and will probably be working with other developers to get this kernel ported across.
Master™ said:
My phone never gets hot?
But they did put a warning, and you are the one modding your device.
Click to expand...
Click to collapse
Yeah, mine will get warm, but I've never seen it get real hot.
testing now . just flash with clockwork? this is super cool guys. props
blackerwater said:
testing now . just flash with clockwork?
Click to expand...
Click to collapse
Yes, its CWM flashable, but be careful with it. There is no failsafe, if your phone cant handle the overclock itll just crash as its set automatically to 1.6GHz topend
So far so good. Just got a linpack of 12.062. Outstanding job guys!
doesn't work yet. just sits on vibrant screen. its cool ill just flash back ji6 zimage then it should boot. im on stock ji6..... I have a vibrant that can handle 1.3mhz for sure and voodo so ill keep playing with it.
Will this run with stock ji6?
Thank you so much for uploading! I reread about it in phandroid and was about to ask around for it
Sent from my SGH-T959 using XDA App
I flashed again just to make sure . it wont boot on ji6 stock but my ji6 kernel works just fine. so maybe if i was running a bionix rom?
blackerwater said:
I flashed again just to make sure . it wont boot on ji6 stock but my ji6 kernel works just fine. so maybe if i was running a bionix rom?
Click to expand...
Click to collapse
Right now ive only tested it on Fusion personally
Viralblack said:
Hopefully yes, the kernel will be ported to all SGS Variants if possible, Right now we have in our possession Vibrants and Captivates, were looking to expand and will probably be working with other developers to get this kernel ported across.
Click to expand...
Click to collapse
Excellent. I hope you guys can get an Epic soon and work some magic. Also good to hear thatyou'll be working with other devs. Good luck
blackerwater said:
I flashed again just to make sure . it wont boot on ji6 stock but my ji6 kernel works just fine. so maybe if i was running a bionix rom?
Click to expand...
Click to collapse
I have stock JI6 rom but have the "backwards compatibility for JFD kernels" flashed so maybe that's it.
Have you tried flashing the back kernel support file for JI6 then flash this kernel?
Whitehawkx said:
I have stock JI6 rom but have the "backwards compatibility for JFD kernels" flashed so maybe that's it.
Click to expand...
Click to collapse
ok ill give that a shot. thanks
Will this work with voodoo?
Bionix Fusion 1.0 Jacs Xmod Oc/Uv Kernel Color fix Voodoo
http://goo.gl/EnELm
v5.2 Updates
-----------------
Fix video playback
Minor tweaks to ram reservations to try to help with stability
v5.1 Updates
-----------------
Voodoo Sound v6 (Thanks Supercurio!)
Ramdisk cleanup
v5.0 Updates
-----------------
Voodoo Sound v5 (Thanks Supercurio!)
Kernel version in Settings (Thanks S0niqu3!)
It includes Settings.apk in the ZIP file. It's the one S0niqu3 modified from Bionix V 1.3.1. It should be compatible with most ROMs, but it might cause problems. Make sure you back up your existing Settings.apk if you are on a different ROM. You can also just remove it from the ZIP file if you are concerned about it. I also removed the BLN settings app as there is now a version in the market.
Older Changelog
----------------------
Test 4 includes NFS/CIFS drivers, Tunneling driver, and some scheduler tweaks.
Test 3 includes voodoo color..
---- TEST2 Updates ----
OK... Think I've got the sound issue solved... at least via the speaker it sounds good without the pops. I appear to have misplaced my headphones, so I'll test that again tomorrow.
Set the voltages at 100-800 frequencies to stock. 1Ghz+ is at 1500 default, use voltage control to lower them down. As Alienz mentioned, keep the spacing reasonable. I set 1Ghz to 1350 and the OC voltages to 1400 on my phone. There is kernel code in there that is supposed to take the size of the jump into account and wait for it, but it doesn't seem to work at OC speeds... The jump from 800-1000mhz seems to work fine, even though the default is a big jump now. The reason for that is you can only specify 4 default voltages, and this seemed like the best distribution for now.
I've also backed off the scaling settings to try to help stability in general and so you can set your voltages in a nice linear pattern, not worrying about the kernel skipping some of them. I re-enabled the states drawer so you can disable some of them if you wish. I haven't noticed a lot of lag from leaving them in though. It will still scale faster than stock, but not as fast as TEST1.
---- TEST2 Updates ----
With SetCPU, don't set the max lower than 800, including under any profiles. It will likely crash.
Okay..... Same feature list as 3.6...
Based on real Vibrant source
BLN (BLN control installed in ZIP, updated version is available in the market)
OC to 1.4 available (limited to 1ghz at boot, enable with voltage control (installed) or setCPU)
Adjustable UV (Voltage control app)
Voodoo Sound v4 (requires the voodoo control app from the Market)
Voodoo Lagfix
Various speed tweaks based on the "speedmod" kernel patch
RAM hack to increase available RAM
TinyRCU
BFQ
Increased GPU cap (The screen must be turned off after boot once. Max is 65fps.)
Reduced speed stepping lag
CIFS/NFS support included in kernel (no modules needed)
Due to the way the frequency scaling works, I recommend setting voltage at 1Ghz and up to your set max to the same voltage. This helps stabilize the voltage before you start pushing the CPU too hard.
As people will ask, Samsung stock voltages:
1000000, 1275
800000, 1200
400000, 1050
200000, 950
100000, 950
Credits:
Morfic - Help with OC and GPU cap
Supercurio - Voodoo everything
Hardcore - speedmod patch for i9k kernels
Raspdeep - Configurable OC/UV
Xan - Voltage Control app
Known Issues:
1400 Mhz doesn't perform like one would think it should in benchmarks... 1360 and 1280 seem to be the sweet spots for most users.
Thank you
running Trigger 2.6
W/ dragon kernel uv/oc to 1.28
and Adw launcher ex
I'm assuming this is based off of vibrant source?
I R dumb and fail at life for not reading more carefully.
STiGLOGiC said:
I'm assuming this is based off of vibrant source?
Click to expand...
Click to collapse
Yes its in the op
It says its based off real vibrant source.
running Trigger 2.6
W/ dragon kernel uv/oc to 1.28
and Adw launcher ex
YaY ttabbal To The Rescue!!!!
Okay..... Same feature list as 3.6...
Based on real Vibrant source...in op.
Trying out now. Your awsome!!
STiGLOGiC said:
I'm assuming this is based off of vibrant source?
Click to expand...
Click to collapse
OMG...
Just like scrizz said before....
Read.. REad... REAd.... READ THE OP!!
And yes... It is based of the source!
All XDA App Users Rock Tapatalkie!!
Can anyone report whether HD video recording and playback are working? Also, does it have voodoo color?
so same feature as 3.6, is this just a stability test?
Ehh imma flash it anyway lol
running Trigger 2.6
W/ dragon kernel uv/oc to 1.28
and Adw launcher ex
I'll own that reading fail. My apologies for cluttering the thread. Again lol
Can I ask what type of boot up logo is used in this kernel? I used to be a regular user of your Dargon kernels Ttabbal, but I had to reboot my phone at the office the other day and my boss looked over and asked why, and I quote, I'm "playing dungeons and dragons at a place of business".
If its not too much trouble could you make an office friendly version of your kernel with a stock boot screen that says "Vibrant".
blinksilver said:
Can I ask about what type of boot up screen is used in this kernel? I used to a super regular user of your Dargon kernels Ttabbal, but I had to reboot my phone at the office the other day and my boss looked over and asked why and I quote I'm "playing dungeon and dragons at a place of business"
If its not too much trouble could you make an office friendly version of the your kernels with a stock boot screen that say "Vibrant".
Click to expand...
Click to collapse
Same as 3.6, dragon boot up screen
Hey the screen is bright again lol.
Running Trigger 2.6
W/ dragon kernel uv/oc to 1.28
and Adw launcher ex
Mannymal said:
Can anyone report whether HD video recording and playback are working? Also, does it have voodoo color?
Click to expand...
Click to collapse
I can confirmed that HD video and HD camcorder is working.
hmm is this suppose to be more stable when uv/oc?
I usually get instant freeze when I uv too much. And I uv 25more than usual and it havent froze yet. Will leave it till tomorrow and some more testing
this is my setting if anyone wants to try it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: I lowered by 25. Will see how it holds up.
running Trigger 2.6
W/ dragon kernel uv/oc to 1.28
and Adw launcher ex
Awesome...was just going to bed when...bam
-big, huge, enormous, gigantic (you get the drift) thanks for all you do. Looking forward to seeing it move out of "test" - which means it has your full blessing and can party all night long. For now, I'll make sure I bring her back before the sun rises...
keep up the great work.
3.6 -> 5.0?
What's the difference? 3.6 seemed really good.
uurrnn said:
3.6 -> 5.0?
What's the difference? 3.6 seemed really good.
Click to expand...
Click to collapse
This is based off official kernel source.
Sent from my SGH-T959 using XDA App
uurrnn said:
3.6 -> 5.0?
What's the difference? 3.6 seemed really good.
Click to expand...
Click to collapse
there was 4.0 test1-4
hitman818 said:
This is based off official kernel source.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Oh LOL. I must've missed that. Nice. Very nice.
It's DoW if you owned a Vibrant before, Trinity is the name in its passport though.
-------------------------------------------------------------------------------------------
Files and source:
www . Der Kernel . com
-------------------------------------------------------------------------------------------
ICS:
Voodoo Sound V10 (Thanks supercurio)
Trinity Spice (based on voodoo color V1 by supercurio)
BLN (Backlight notification) (Big Thanks Neldar)
Backlight dimmer by Ezekeel
Based on Samsung git source.
Safeboot to lower clock, higher need a tool like setcpu or no-frills CPU control
New Trinity bootanimation by @rascarlo
TUN module (Tunneling/VPN support)
CIFS module (Samba support)
EXT4 tweaks
Most lean build achievable.
Not a rebooter.
JB: WIP
For CM, to use this kernel flash the CM Black Screen Fix (Thanks JackpotClavin and lurtis)
Thanks to @RyanMacG for euroskank hosting
When "Just Flash It" didn't work:
Flash rom.
Flash kernel.
Power off.
Pull battery for 2 minutes.
Put battery back
Now boot phone.
---------------------------------------------------------------------------------------
GPS woes? Try this .apk, worked wonders on GB.
Endursa shared this GL fixing link. Follow it, see 65fps on Quadrant planet like it was meant to be.
T for Trinity
UV for undervolt (you would want to uninstall setcpu like apps and just run it)
EUV represents a 880MHz top speed power savings kernel, snappy still? You Bet'cha!
144 for 1.44GHz (I will rethink this when the 10GHz phones hit the market)
-Any means it uses Koush's anykernel scripting to install trinity using the original ramdisk, making it possible to use it on m(any) roms w/o needing a special version.
(X)A new kernel just born by my slacker hands, feel free to use it, we think it's good even if it was eXperimental just moments ago. (X) comes off when we feel it's a daily driver.
maybe i need this later
Hmmm, interesting :3
I'll test it right now
edit: Freeze after playing games or using the 3d drawer
dario3040 said:
Hmmm, interesting :3
I'll test it right now
edit: Freeze after playing games or using the 3d drawer
Click to expand...
Click to collapse
Launcher Pro? Or do you mean adw's 4D?
Sent from my Nexus S
morfic said:
Launcher Pro? Or do you mean adw's 4D?
Sent from my Nexus S
Click to expand...
Click to collapse
Google's stock android 2.2/2.3 launcher.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yea I will say this is the fastest kernel I have ever used, scored averaging 3700, best being almost 4000...Solid work morfic.
adewey234 said:
Yea I will say this is the fastest kernel I have ever used, scored averaging 3700, best being almost 4000...Solid work morfic.
Click to expand...
Click to collapse
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S
morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S
Click to expand...
Click to collapse
Unfortunately not stable on my device. Ran a couple of quadrants (4015) but froze during smartbench.
morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Sent from my Nexus S
Click to expand...
Click to collapse
Naw it runs 100% on full OC 1440. I only have issues with radio occassionally, but thats because i cant make up my mind which is better, KB1 or KB3. But yea, mos def a daily driver. Ive drained my battery in 1/3 of the time i usually do, playing with my phone so much. Much appreciated sir, if you need more experienced feedback, let me know, I've done some work with android, just dont have the time as of late, but logcats etc are easy and not that taxing on my time
morfic said:
Thanks for some positive feedback.
This is the longest tested of all kernels I built.
Simms22 is not much of a tester, his phone runs about any crazy oc and uv I throw at it, so I added time to testing it
Unfortunately no oc kernel will ever run stable on all phones, if they did, samsung would charge us for that.
Click to expand...
Click to collapse
except for that damned 1.7ghz kernel. one of these days..
jlevy73 said:
Unfortunately not stable on my device. Ran a couple of quadrants (4015) but froze during smartbench.
Click to expand...
Click to collapse
the phone commited murphacide
adewey234 said:
Naw it runs 100% on full OC 1440. I only have issues with radio occassionally, but thats because i cant make up my mind which is better, KB1 or KB3. But yea, mos def a daily driver. Ive drained my battery in 1/3 of the time i usually do, playing with my phone so much. Much appreciated sir, if you need more experienced feedback, let me know, I've done some work with android, just dont have the time as of late, but logcats etc are easy and not that taxing on my time
Click to expand...
Click to collapse
i used(on uv now, will use again) this kernel, as a daily driver, longer than any other. it definitely deserves respect. btw, i use KB1, and also had a hard time decided which radio i liked best
Hey Morfic, I have a question, when you were applying the patches for the kernels with BFS, were you using this file or a different one? 2.6.37-sched-bfs-363.patch
adewey234 said:
Hey Morfic, I have a question, when you were applying the patches for the kernels with BFS, were you using this file or a different one? 2.6.37-sched-bfs-363.patch
Click to expand...
Click to collapse
359 and later 363, but been a while.
Curious to see if superuser still hangs in "VM_WAIT" with 363 now or not.
Sent from my Nexus S
Mine was stable at 1.4ghz, but crashing constantly at 1.44ghz.
terryhau said:
Mine was stable at 1.4ghz, but crashing constantly at 1.44ghz.
Click to expand...
Click to collapse
Exactly the same issue I had.
How can you guys get almost 4000 in quadrant scores.
The maximum I got w/ this kernel was 3100, for me the phone is reallly fast but if you have more I want this more that I don't have.
Thanks,
liquelt said:
How can you guys get almost 4000 in quadrant scores.
The maximum I got w/ this kernel was 3100, for me the phone is reallly fast but if you have more I want this more that I don't have.
Thanks,
Click to expand...
Click to collapse
set your cpu to 1440/1440, then test 4 times in a row. the 1st is always much lower then the rest. the 3rd or 4th test should be more accurate.
First - 3091
Second - 3247
Third - 3770
Forth - 3813
Fifth - 3591
So here is my results, thanks for this FANTASTIC KERNEL.
liquelt said:
First - 3091
Second - 3247
Third - 3770
Forth - 3813
Fifth - 3591
So here is my results, thanks for this FANTASTIC KERNEL.
Click to expand...
Click to collapse
there you go, good ole #4
@800MHZ is the voltage the same or lower than 1GZ?
I recently built a CM7 O2x kernel from my G2x (cm-kernel based) source for a O2x user who now uses a Pre^3 and thus i am feedback less.
If someone who is not afraid of a possible non boot would test the kernel (test build is a 1.0GHz kernel aimed at saving battery) I could build O2x versions of my kernel on a more regular basis if feedback shows everything indeed works.
If the initial obstacle is cleared, i would build my 1.5+GHz version next.
http://goo.gl/CgbVD is ELP-O2x-10092011, so built 3 days ago.
Thanks in advance for any feedback.
here i am...
EDIT:Just tryed on latest miui and work well...
yes it works
yes everything works fine and can you make your 1.5GHz version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works fine
Sent from my Optimus 2X using Tapatalk
Hi, great to see you here morfic. Finally . Your kernels for the NS were simply amazing....
I flashed it and so far everything works...
Looking forward to an e-penis kernel.
gaeng4665 said:
Looking forward to an e-penis kernel.
Click to expand...
Click to collapse
+1
Sent from my Optimus 2X using Tapatalk
possibly a stupid question but this kernel can be applied to stock rom 10d?, my English is bad and may not say it to understand what kind of rom is
No it is ONLY for CM7 based roms!
BTW i'm getting killer benchmark scores, can't say so much about battery life though (too little time since i flashed it),
After the gym i had a SOD, but didn't run alogcat, so i'm not saying it is related to the kernel.
It's just meant as a piece of info....
Hope you build the 1.5 Ghz kernel soon...
Very smooth but lot of sudden deaths
Sent from my Optimus 2X using Tapatalk
http://goo.gl/5C12v T15-O2x-14092011
we have a lot of half truths in G2x land, like that G2x can't run 216MHz minimum frequency without SoD.
With this kernel and the "ELP" one, 216MHz is no problem in G2x land.
it's possible the rumor is from applying O2x experiences to G2x early on.
In which case i could dig through the source and see if there is anything obvious that fixed it for G2x, but not O2x
(raise minimum frequency on either kernel if you do experience a SleepOfDeath/SoD)
Keep in mind this is a 1560MHz kernel i linked in this post, with the obvious differences in hardware, let me know if 1560MHz is not for O2x, many people love it on G2x, i can drop to 1540MHz or lower for stability (yes, that 20mhz difference might be all it needs)
1.6GHz is not stable, and i am not ready to further up the voltage as the voltage would go in the "are you serious to run this much voltage?" territory.
the more voltage you pump in, the more DTT will throttle the chip.
let the feedback roll in
and if you do not run cm7, let me know which kang or miui you run (kernel runs fine with whitehawkx's miui on G2x)
This kernel is not for any roms based on stock 2.3.3 gingerbread.
It works so far but why cant we modify the voltage though pimp my cpu or setcpu?
fry92 said:
It works so far but why cant we modify the voltage though pimp my cpu or setcpu?
Click to expand...
Click to collapse
it's disabled for testing
for T15 i can enable it later
for ELP it will stay off, there is not really any headroom to go any lower than it is.
kernels are meant to be flashed and then you forget about them and go on and use your phone, this holds particularly true on the 1.0GHz undervolted version.
The T15 could benefit from finding the lowest stable settings on each individual phone.
I had another SOD. If it is related with the 216 Mhz min frequenzy, you should check the source of vorkkernel (that kernel runs perfectly at 216 Mhz, but just can not compete with your kernel elp performance wise).
Going to try your 1.5 Ghz...
Thx
Sent from my Optimus 2X using XDA App
I tried the 1,5ghz and it seems to be stable for me. I ran a couple benchmarks and surfed a few websites and no crashes, lags or whatever.
Sent from my Optimus 2X using Tapatalk
Hi, installed and works ok.
One problem: when the screen Goes off during à Call.
And you leave it off for About 20 seconds, then It isn't possible anymore to get the screen on again.
Only way to get the screen on again is to pull the battery.
To be sure it is THE kernel That causes this, i tried vorkkernel and the problem doesn't occur using The vorkkernel.
Btw: i only use basesband 502; THE only baseband that gives good Callas quality.
jan1000 said:
Hi, installed and works ok.
One problem: when the screen Goes off during à Call.
And you leave it off for About 20 seconds, then It isn't possible anymore to get the screen on again.
Only way to get the screen on again is to pull the battery.
To be sure it is THE kernel That causes this, i tried vorkkernel and the problem doesn't occur using The vorkkernel.
Btw: i only use basesband 502; THE only baseband that gives good Callas quality.
Click to expand...
Click to collapse
Thanks, I look at proximity stuff.
Vork's kernel should perform very similarly on purely performance side of things.
We ended up sharing ideas.
So the other comment about it being smoother than vork is surprising and intriguing to be honest.
I enjoy building kernels, and since I had 'elp' built already wanted feedback, that comment I didn't expect.
Sent from my A501 using Tapatalk
jan1000 said:
Hi, installed and works ok.
One problem: when the screen Goes off during à Call.
And you leave it off for About 20 seconds, then It isn't possible anymore to get the screen on again.
Only way to get the screen on again is to pull the battery.
To be sure it is THE kernel That causes this, i tried vorkkernel and the problem doesn't occur using The vorkkernel.
Btw: i only use basesband 502; THE only baseband that gives good Callas quality.
Click to expand...
Click to collapse
Strange, I had the same screen blanking issue with CM7 Kang I built 2 days back. Doubt if it kernel related or common to both.
hackworks said:
Strange, I had the same screen blanking issue with CM7 Kang I built 2 days back. Doubt if it kernel related or common to both.
Click to expand...
Click to collapse
Hm, that will make it harder to track.
For one I need to change my G2x / O2x to 'anykernel' ....before vork spanks me for not using it.
I pulled this ramdisk 4 days ago.
Doing this w/o phone at hand I'll be better of using 'anykernel' then.
Sent from my A501 using Tapatalk
Hey, just wanted to report another SoD after i hung up on a call. Those are the only SoD i get, but i get it pretty much after every call.
Never happens on Vork's kernel or the stock cm7 kernel.
I am running the ELP kernel.
Hope I could help.
i'm testing the T15 on latest miui and seems all ok....just a note ,the battery consumption seems to much high....
Hi, a friend came by and asked me to optimize his tegra. Thanks for faux123, we have an OC kernel. Made the following changes
1. Added JRCU with lazy to optimize RCU implementation of dual cores
2. Made INTERACTIVE (not powersave) default by making changes in cpufreq drivers
3. Made noop default (can be changed in ROM)
4. Overclocked settings from 216mhz - 1400000 mhz with voltage from 750mv - 1350 mv
5. AVP/VDE overclocked to 300000 mhz
6. GPU overclocked to 400000 mhz
7. Memory speed set at 333000mhz
8. Optimized utilization of dual-cores (cpu0 and cpu1) by making changes in how cpu1 is called.
9. Reverted a few changes in the overclocking code
Again, thanks to faux123 he saved me a lot of time and made things a lot easier.
WARNING:
These timings are pretty aggressive and might not work for your atrix that is why I called it elite (fortunately my friend's Atrix handled the timings pretty well) so please backup.
-----------------------------------------------------------------
-----------------------------------------------------------------
Update: 2/6/2012
1. Increased cyanogen overclocked speed to 1.6ghz!!!
Link:
www.tunerspotter.com/clemsyn/Ultimate1.6eliteCyano.zip
-----------------------------------------------------------------
-----------------------------------------------------------------
Update: 1/30/2012
1. Updated to 2.6.32.55 (Thanks faux123)
2. Build for ATT and Cyano at 1.5 GHZ
ATT 1.5 ghz kernel
www.tunerspotter.com/clemsyn/ClemsynATT1.5elite.zip
Cyanogen 1.5 ghz kernel
www.tunerspotter.com/clemsyn/ClemsynCyno1.5elite.zip
BTW, if you like my work, please
and help me buy some diapers. Thanks.
-----------------------------------
-----------------------------------
UPDATE: 1/28/2012
1. Increased overclocked to 1.5 ghz
2. Only for Cyanogenmod ROMs at the moment
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.5kernel.zip
-----------------------------------------------------------------
-----------------------------------------------------------------
UPDATE:
1. Updated to 2.6.32.48 with faux123 optimizations and changes
2. Added 1.0 ghz kernel for both att and cyanogenmod
3. Added a few optimizations in interactive governor to improve CPU sleep and wake
4. Added 1.4 ghz for att
5. Added 1.4 with aggressive memory timings for Cyanogen
ATT VERSION 11/22/2011
1.0 ghz ELITE version
www.tunerspotter.com/clemsyn/ClemsynATT1.0elite.zip
1.4 ghz ELITE version
www.tunerspotter.com/clemsyn/ClemsynATT1.4elite.zip
Source
www.tunerspotter.com/clemsyn/kernel2.tar.gz
--------------------------------------------------------------------------
CYANOGEN VERSION 11/22/2011
1.0 ghz ELITE version Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.0.zip
1.4 ghz ELITE version Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.4.zip
1.4 GHZ Elite version with a more aggressive memory timings Cyanogen
www.tunerspotter.com/clemsyn/ClemsynCyanoElite1.4memorytimings.zip
BTW, if you like my work, please don't hesitate to click on the donation button under my sig and help me buy some diapers It will be appreciated. Thanks.
------------------------------------------------------------------------
------------------------------------------------------------------------
Older version
www.tunerspotter.com/clemsyn/ClemsynCyanogenElite.zip
I suggest you use system tuner in the market to tweak voltages/governor/io scheduler and SD cachesize
SOURCE : www.tunerspotter.com/clemsyn/kernel.tar.gz
BTW, if you want 1ghz or 1.2 ghz max overclock here are the steps.
Install system tuner ==>Tweaks===> CPU and bring the top slider down to your desired speed (1ghz or 1.2 ghz) and that will prevent the phone from going higher your desired speed
BTW, if you like my work, pls dont hesitate to click on the donate button under my sig. Thanks.
It says "elite", but do you know how many people are going to flash this (that shouldnt be flashing this) and flood this thread with "noob questions"?
God speed my friend, God speed...
andrew.cambridge said:
It says "elite", but do you know how many people are going to flash this (that shouldnt be flashing this) and flood this thread with "noob questions"?
God speed my friend, God speed...
Click to expand...
Click to collapse
I have no issue with noob questions, BTW, I am a kernel dev for Gtablet, Adam and Asus Transformer so this is not my first release and I am familiar with the kernel code for the tegras
Any wifi issues?
Sent from my MB860 using XDA App
Took it for a spin just now. -100mv on all levels undervolt. Quadrant completed 3x with no issues. Best score was 5024
On nightly 19
*edit* 150 and 200mv under lock my phone instantly but -100 on all levels seems rock solid and the phone feels snappy. Ill report back tomorrow night after a day of normal use (unless something else to flash comes out)
Sent from my MB860 using Tapatalk
Whoever tries this kernel out, please post back results of what its currently doing and a few days after. I would personally try it but, my phone needs to be stable for my job and college.
Sent from my Atrix XDA Premium App
Voelker45 said:
Whoever tries this kernel out, please post back results of what its currently doing and a few days after. I would personally try it but, my phone needs to be stable for my job and college.
Sent from my Atrix XDA Premium App
Click to expand...
Click to collapse
Flashed this on nightly build #20 ended up not booting so I cleared the caches again and next restart put me in an endless bootloop. Restored my backup gonna try a different cyanogen build with this. Anybody who has success please let everyone know what cyanogen build you are on? Gonna try this with the weekly build next.
flashing now. will update back.
Sweet Welcome!
Awesome. UVed -170 on all for now. -175 randomly rebooted after a couple minutes. Gonna work myself down until it's stable. Knowing that every step is going to be UVed to the max 100 mV limit makes UVing a LOT easier. You only have to worry about the top step.
d11dog11 said:
Took it for a spin just now. -100mv on all levels undervolt. Quadrant completed 3x with no issues. Best score was 5024
*edit* 150 and 200mv under lock my phone instantly but -100 on all levels seems rock solid and the phone feels snappy. Ill report back tomorrow night after a day of normal use (unless something else to flash comes out)
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
I couldn't go past -100 either but it was stable at that level. Pretty solid Antutu ratings: 6539, 6767, 6774
I'm sure if I pushed it I could do better, however that hammered stability pretty well. We'll see how it goes battery-wise as well. Thanks for the upload!
Is there any chance you can make a 1.5ghz version? Not for all use but it would be fun to have. I know Kholk has one so isn't it possible?
Successfully flashed. I notice smoother screen transitions and scrolling. Not placebo, as the previous at 1.45 ghz had a very slight lag time when swiping to a different home screen. Also nice bench score on cf-bench (7800s) Thank you very much!
Just it UV'd -150 on all, hammering CF-bench. Looking pretty stable so far, and I like how it handled Quadrant earlier, I saw some positive spikes in FPS and it was smoother overall. I don't put much stock in Quadrant tests but nonetheless. Will throw up some Nenamark test as soon as I'm done hammering CF-bench.
faux123 said:
Sweet Welcome!
Click to expand...
Click to collapse
Big Thanks to you I won't be developing much for the atrix since I just developed it for my friend but I just wanted to share what I made. Currently uploading the source (Ive got a really slow internet)
clemsyn said:
Big Thanks to you I won't be developing much for the atrix since I just developed it for my friend but I just wanted to share what I made. Currently uploading the source (Ive got a really slow internet)
Click to expand...
Click to collapse
It gives us something to play with. I'm more of a 1.0GHz Blur-oriented ROM user but I like new toys, and thank you for uploading it for us junkies.
BravoMotorola said:
Is there any chance you can make a 1.5ghz version? Not for all use but it would be fun to have. I know Kholk has one so isn't it possible?
Click to expand...
Click to collapse
I actually though about pushing it to 1.6 ghz but was very hesitant since I didn't own the device and it didn't have enough room in there the disipate the heat. I just played safe with 1.4 but 1.5 should be no issue. If I get the chance to get the atrix again, I'll try to push it to 1.6 and make one for att gingerbread.
Nenamark 1: 57.2fps
Nenamark 2: 27.5fps
Great scores for an Atrix!
clemsyn said:
I actually though about pushing it to 1.6 ghz but was very hesitant since I didn't own the device and it didn't have enough room in there the disipate the heat. I just played safe with 1.4 but 1.5 should be no issue. If I get the chance to get the atrix again, I'll try to push it to 1.6 and make one for att gingerbread.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashed... running fine so far, will report back. THANKS TO THE OP & FAUX!
Sent from my Atrix awaiting CM9....