I have a friend that want's to flash a custom ROM to his captivate. He has it rooted but hasn't done anything else.
I said I would install CM7 or something on it for him. I had a Droid and Droid2 and am now on a Thunderbolt. So rooting and flashing ROMs aren't new to me. But, as with all three of my phones, things are a little different on the Captivate.
I see there's this Odin thing and I think no permanent clockwork recovery? How do you install ROMs on the Captivate? I see there's a new CW that doesn't need what ever Odin is. He's on the stock kernel and everything. So do I just boot into recovery and flash the clockwork update.zip and then flash normally through CW?
Also, being as he doesn't know how to do any of this, which is the most stable and bugless ROM that everyone uses. He won't know how to flash something else, so I need something that is as close to 100% as possible, speedy, and close to, if not ASOP.
Thanks
Hello,
Please post in Q/A as this is not a development topic. Suggest mod move the post.
I suggest that your buddy do some reading. Are you going to be there to hold his hand every day if something goes wrong with his flash? Tell him to educate himself. And if flashing is not new to you and your 3 phones, you should know what section a question like this goes in, is it "android development" related?
Sent from the frozen tundra known as Canada.
Most stable rom I have ever used is firefly 3.0. But your friend should see u do it and at least know how u did it to his phone. And yes from stock just do the clockwork mod update.zip and then flash through clockwork mod, there is a little more involved in flashing cm7 and it is not the most stable rom anyways. Good luck and I hope u take my advice on firefly you won't be dissapionted
The flashing procedure will vary depending on what ROM you want to run.
CM7/MIUI have their own set of procedures.
Flashing a Froyo based ROM you'll have to flash CWM 2.X then the ROM
Flashing a Gingerbread based ROM you'll have to flash the updated Gingerbread bootloaders first via Odin then flash the Kernel or CWM 3.X or higher, then the ROM.
Post in question section plz
I advice you to start flashing a not complicated rom (2.2) , once you get the hang of it then you go advance.
Moved to proper forum.
Odin is a program that is ran in the computer to flash a rom, bootloaders, and kernel at once. For it to work your phone has to be in download mode. Clockwork works with rom manager in the app store, some roms have it in the kernal.
Sorry, the forums I used before all root related things, including questions, went in the Root section. I thought Q&A was for non-root/development questions.
Thanks a lot Dustin, Kyuta, and bassplayer for the information.
I am going to show him how to do it. But I'm not going to hold his hand every time. That's why I wanted something stable where he wouldn't have to flash something else to get functionality that was missing.
Related
I updated to froyo 2.2 (leaked version) on my samsung captivate, and I was wondering if there was a possible way to downgrade back to 2.1.
*The only reason im not liking froyo 2.2 at the moment i cant seem to learn our find out how to root it...
Wanted to root to rom a custom rom?
"noobie question"--> if i was to downgrade to 2.2 back to stock 2.1 and root it to have super user, i could then be able to install a custom rom? OR what would other people suggest doing?
Could someone point me in the right way with a link or two maybe, or some suggestions?
bummmpppp! this is all so new to me!
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
DiGi760 said:
Here's a link to the SuperOneClick to root and enable non-market apps.
And here's a thread for new captivate users.
You might have an easier time finding answers in the Captivate forum.
Click to expand...
Click to collapse
Thanks so much for these thinks, I can use this SuperOneClick user on my Captivate with froyo 2.2 correct?
I like the froyo 2.2 just couldnt figure out how to get superuser, im trying to install a custom rom on it, never done it before just wanted to try one out and see! New to all this so probably have more questions haha !
Also another noobie question(s).
What does "flashing" mean?
lol
You have to be rooted to have superuser privileges.
Flashing a phone rom is like installing a new OS on a PC. Be careful on doing so and watch some videos and read up on it if you get brave to try flashing custom roms onto your device. Usually ppl use a windows app called Odin to do so. Make sure phone always charged 100% before flashing any new rom also. It could mess up battery stats otherwise and could risk brick if its almost dead then dies LOL. Assuming that's the context of flashing you meant.
Sent from my SGH-T959 using XDA App
try bookmark this page 1st if anything wrong u can recover to original rom.
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Go to this link
http://forum.xda-developers.com/showthread.php?t=884364
It has everything you need to know about installing a custom ROM. Started like you all, found this post and now I have flashed like a 100 times Enjoy!
Mac4Wii said:
Also another noobie question(s).
What does "flashing" mean?
lol
Click to expand...
Click to collapse
Flashing in simple terms means to install a new OS version/Updates/Themes etc on the phone. The most common method found here in XDA is to use something called as Clockwork Recovery Mod.
Seriously, go to this link http://forum.xda-developers.com/showthread.php?t=884364 you will know what you need to do to flash a custom ROM. And may I suggest Firefly 2.1 found here http://forum.xda-developers.com/showthread.php?t=914284 as your first ROM. It is a good ROM. You will enjoy it. There are some other ROMs, if you ask which is the best, clearly there is none, it is purely on preference. Once you have flashed one ROM, and then a few, you will know which one you like.
1. installing a custom rom does not require a rooted phone, you can copy the update.zip to your sdcard and get into recovery, select the custom rom zip file and flash from there.
2. have you flashed a bios on a computer? flash a phone's rom is very similar to that.
I can't seem to find the answer - I've purchased the VZW Tab Bootstrapper, which at this point only seems to brick my tab - after Heimdalling, I installed Oldmacnut's Rooted Gingerbread Rom - ROM Manager says that CWR 3.0 is installed - if I push flash new recovery, the only devices i can select from are Galaxy i900 - assuming that the rom was built from this device - so, what do i need to do to get clockwork properly installed? If i volume up/power up, I get stock recovery - if I use ROM Manager, it gives me the triangle with a progress bar for a second or two, then reboots - don't want to reboot with the bootstrapper program again, as i don't want to re-brick my tab - unless I'm crazy, there doesn't seem to be an easy solution - am I crazy and/or blind? There seems to be a possible kernal solution, but I have to flash it, and I can't flash it if i can't get clockwork recovery going - i think. help....
yeah, all the bootstrappers only work for Froyo.
I released a CWM + EXT4 kernel with V1 of my Gingerbread roms, only the kernel doesnt have 3G.
I also started on a new kernel for both, 3G being an issue when i ran head first into CM7 for the tabs.
I then decided to hold off on the kernels as i was building a kernel for CM7, I thought I could release a new one.
Now, last night I thought about making a thread with all forms of "recovery" from Froyo to GB for people who need to reflash a tab back to stock, and offer a bone stock version, and a rooted version. I just need to finish uploading the remaining roms to my server for hosting before i can post it all.
I thought of this as alot of people ask where they can find X rom or X kernel, which is why i started on that mirror.
No reason to flame, the issue of CWM for GB and the bootstrappers have never been addressed publicly
Is there a way to stay on rfs with your cwm kernal you posted?
oldmacnut said:
yeah, all the bootstrappers only work for Froyo.
I released a CWM + EXT4 kernel with V1 of my Gingerbread roms, only the kernel doesnt have 3G.
I also started on a new kernel for both, 3G being an issue when i ran head first into CM7 for the tabs.
I then decided to hold off on the kernels as i was building a kernel for CM7, I thought I could release a new one.
Now, last night I thought about making a thread with all forms of "recovery" from Froyo to GB for people who need to reflash a tab back to stock, and offer a bone stock version, and a rooted version. I just need to finish uploading the remaining roms to my server for hosting before i can post it all.
I thought of this as alot of people ask where they can find X rom or X kernel, which is why i started on that mirror.
No reason to flame, the issue of CWM for GB and the bootstrappers have never been addressed publicly
Click to expand...
Click to collapse
Thanks - at least I know I'm not nuts - I honestly don't know that it's necessary to mess with the kernal that's in the GB rom you compiled - it works great as is - I'm just so used to flashing stuff through Clockwork from all the android phones I've had - new to the samsung/tab world, trying to get myself up to speed -
Thanks again for getting back to me, and please, PLEASE take care of yourself and family - this android world is supposed to be fun, not just for us that take advantage of the work that devs like yourself put in, but fun for the devs too - now put your feet up, pour yourself something cold, and watch some football.
Just make sure to have all the ROM's you started finished by morning...
My name is Jack, and I'm a romaholic.
Here is the thread you need to read first..
http://forum.xda-developers.com/showthread.php?t=1099036
TheATHEiST said:
Here is the thread you need to read first..
http://forum.xda-developers.com/showthread.php?t=1099036
Click to expand...
Click to collapse
Oops - copy that - thanks for the heads up.
Thread moved to Galaxy Tab Q&A.
Oldmacmnut,
I can't seem to get Heimdall working (or USB at all, for that matter) on my Tab. I have root, and I can reboot into recovery, although it isn't CWM recovery. I tend to believe that the problem is in a corrupt ROM install of some sort, and would like to either flash a stock ROM to get back to square 1 or a rooted ROM. Problem is, I think I need to figure out a way to do that through recovery as USB doesn't seem to work at all on any computer that I have tried. If you have a CWM Recovery that works, is it flashable in the stock recovery?
Thanks,
Seth
Hi Everyone,
I bought ROM Manager Premium v4.5.0.1, in order to do a Nandroid backup on my I896 running stock I896UXJL1.
I ran "Flash ClockworkMod Recovery", and it said my Current Recovery 2.5.1.2 was the same as the Latest Recovery. So far so good.
Then I ran "Backup Current ROM." Instead of doing a backup, it rebooted my phone into Recovery "3e" every time. I tried it many times and got the same result.
This is so confusing. For whatever reason the app decides to boot my phone into recovery instead of doing the backup, I would expect it to at least go into CWM Recovery instead of the stock 3e.
Questions:
1. Has any of you gotten rebooted when you try to do a Nandroid backup?
2. Has any of you gotten rebooted into stock recovery even when CWM is installed?
Thanks.
KK
In general ROM manager is trash for SGS. Don't bother with them. I would say find a kernel with CWM cooked in it but JL1 is a rogers only and I don't know any for that.
prbassplayer said:
In general ROM manager is trash for SGS. Don't bother with them. I would say find a kernel with CWM cooked in it but JL1 is a rogers only and I don't know any for that.
Click to expand...
Click to collapse
froyo wasnt so damn kenel picky. any froyo kernel will work.
Doesn't work with any ROM
I've tried ROM manager after flashing KH3 and KJ3, and the "Reboot into Recovery" still doesn't work. I get the triangle-exclaimation-droid screen with nothing else, and it stays that way until I use the 3-button reboot.
Since the app can't even perform one of the more basic functions, I am afraid to let it do anything else. I wish I hadn't paid for the premium version.
ROM manager doesn't work on Gingerbread..... Rom manager isn't very good for Samsung phones
KarateKick said:
I've tried ROM manager after flashing KH3 and KJ3, and the "Reboot into Recovery" still doesn't work. I get the triangle-exclaimation-droid screen with nothing else, and it stays that way until I use the 3-button reboot.
Since the app can't even perform one of the more basic functions, I am afraid to let it do anything else. I wish I hadn't paid for the premium version.
Click to expand...
Click to collapse
Stop what you are doing and read. ROM Manager sucks basically. Very few people on here actually use it. If you keep just throwing things at your phone though without knowing what you are doing you are going to end up with a shiny, expensive, paperweight. Then you get to spend upwards of 50$ getting that fixed. So please, for me, the forum, and your phone just read. Or at very least ask a directed, detailed question. As in: my phone is here, im trying to get to there, this is what im doing and this is where and how its failing.
Flashing using an app
I actually did weeks of reading before flashing my phone for the first time. I got scared by potential problems such as USB interruptions.
This is where I am at: I've been using mostly Odin to flash. I have successfully flashed KH3 and then KJ3 (with KF1 bootloaders and Boog's kernel); however, I am still nervous each time I do anything.
This is where I hope (or used to hope) to get to: I keep looking for a way to minimize the probability of human errors and technical hiccups. (It's a habit I've picked up while working as a software manager.)
I went for ROM Manager because the same developer wrote CWM. I do appreciate you guys sharing your opinion of the app's effectiveness with the SGS. I only wish I had been warned sooner (ideally by the app's developer).
Find ODIN packages that don't inlcude bootloaders. That will only minimize your risk to soft bricks wich can be recovered with a jig that are easy to make and only cost ~ $10 if you choose to buy them. I personally use KH3 as my "stock" setting when I need to flash to stock. I use Cezar's KH3 .tar that doesn't include them but there are atleast 1 1 click around.
CWM for Captivate Gingerbread UCKJ2
Sorry in advance for the noob question. I have read many posts but can't find my answer. I've installed the leaked gingerbread rom from Samsung called uckj2. I was trying to change the modem by flashing a zip file using clockworkmod recovery. I've heard the way to do it is by using a kernel that already has cockworkmod already baked in. Which kernel should I use?
Thanks in advance
KJ2 have 3 kernels that should work. Corn kernek, Samurai and Boog's kernel.
Okay. So, I've just acquired a Galaxy Tab off eBay. It's on it's way to me, so I thought I'd burn up a few cycles and go download some goods for flashing as soon as I get it.
The setup: ROM version is Gingerbread. Assume Stock ROM. Model is P1000 (Unlocked GSM).
The question is this. I am completely confused as to what I need to do, and I'd like someone to point me in the right direction. With other devices, I would just root, install custom recovery and voila. Non-stock device. Does this same rule apply with the Galaxy Tab, or is it a new ball game?
Basically, what is the easiest way of getting a custom ROM onto my Galaxy Tab? Do I need to use ODIN and co? Or can I do it all via recovery? Is there any n00b guides that explain installing your first ROM?
I don't want to jump through hurdles that I could have avoided. So, that's why I'm asking you for help. Put me out of my confusion, get a +1 thanks in return. Sounds good, no?
Thanks again. Your help is appreciated.
good day sir.
basically is the same with otherdevices,
root it, install clockworkmod, download and install roms
you will need to flash via odin first because stock rom of gtp1000 have limited options in the recovery mode.
after that, all flashings can be done vie clockworkmod recevery... for your convenience search for these ff. keywords:
overcome kernel
overcome rom
zergrush
cm9 rom
humberos.
no need for thanks buton, i just want to ask you to refrain posting posts in the development forums if you think your post will not contribute to the development, too many assholes there beating each other up and flooding the forum of bullshits.
thanks.
Alright, thanks for the explanation, I appreciate it! Seems to be making sense now...
So, basically, with any ROM I flash, I must use ODIN to flash the kernel? Or will the ROM take care of that? I heard the kernel is mixed in with the recovery system, so I'm a little unsure as to what the go is.
no u just need o flash a kernel with clockworkmod recovery and all succeding flashings be it rom, kernel or anything else canbe done using clockworkmod recovery. of course there are exceptions if the developer specifically requires u to flash via odin
You should follow the Overcome Guide for your first flash, it is comprehensive and easy peasy, lemon squeezy
There are some pics missing in the linked page, I have a cached copy from google that you can refer to also.
GL.
Make back up or the original or current rom
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
ChevanLemon said:
I would like to flash my tab with a custom rom, but I also want to be able to revert or go back to the original rom. My question is how you back up your current or original rom so you could restore it back to its original condition? CMIIW but Titanium back up only back up the apps and stuffs but not the rom, or is it?
Click to expand...
Click to collapse
Please do not hijack my thread. You should make another thread for that - and that's what CWM is used for - making backups!
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
LOL OOPS thought i was in the dev section.... ignore..help below.
xCaptivateRx said:
I used AdamOutler 's guide to root and put a custom ROM on Captivate 2.2 found here:
http://forum.xda-developers.com/showthread.php?t=1012769
And everything went swiftly. AT THIS POINT, I MADE A NANDROID BACKUP
I then wanted to step up to an Ice Cream Sandwich ROM, which was the main purpose of my rooting in the first place. So, I downloaded the ROM found in this forum, as it is the most popular amongst the forums, so to seem. I found it here:
http://forum.xda-developers.com/showthread.php?t=1363760
Well I downloaded the ROM straight from my phone on the browser, then put it on the Root of my internal memory.
I booted into recovery, Factory Reset/Wipe Cache Partition/Wipe Dalvik Cache.
Went to install .zip from SD card, then clicked on install the ICS ROM.
Began to seem as if it was updating, then the phone shut off, started bootlooping.
No big deal I thought, just boot into recovery, right? I booted into recovery. It went from the Red CWM that i had seen before, to a Blue one.
I selected my nandroid backup, and it gave me all sorts of errors.
Got to the point where CWM was acting as if it could even find where it was supposed to work from?
Now I have the Phone>!<Computer on the black screen when I try to turn on.
Anyone else ever had this problem, or could someone tell me what went wrong? Not in a huge rush as this is just my development phone, but do I need to go ahead and use the Odin3 One Click to do a full complete restore or is there any way of saving what I had?
Thanks guys, God Bless.
Click to expand...
Click to collapse
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
TRusselo said:
Different kernels have different colour recoveries. kernels change with rom.
Different CWM version recoveries are incompatible.
Almost anyone that has flashed a samsung galaxy phone has seen that screen, and it is correctly written " Phone /!\ PC " (you can choose to underline the /!\ if you want to be fancy). it is called the "soft brick screen" hint hint.. go search.
yes
yes. restore with same kernel you used to back it up.
Click to expand...
Click to collapse
Very good responce...however after odin3 one clicking back to stock 2.1 eclair, I lost my clockwork mod folder that was on the internal SD, of course. Rookie mistake, I should've definately copied it on to the external SD card. Thanks for informing me of proper terminology. Also, after downloading rom manager and flashing, booting recovery, I can only access cwm through the rom manager, the three button fix doesn't work.
Why was this moved? I posted in general..
because you have a question/problem
rom manager is only used with 2.1 (for captivate). doesnt work on 2.2 or 2.3.X or 4.0.X
in all newer versions of android we "bake" cwm into the custom kernels we package into the custom roms. so there is no stock recovery and you dont need the update.zip.
dunno why you would flash all the way back to 2.1... EWWW.
in the dev section there is a sticky called odin master collection. use a newer stock rom. the master collection also has stocks versions, pre-packcaged with a custom cwm kernel so you can skip a step of getting it after going back to stock.
Do we know why this happened in the first place? Incompatible kernel? Is there a guide somewhere for moving from GB to ICS?
Sent from my SGH-I897 using XDA App
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Do you not have to flash back to 2.1 after having these problems? Right now my phone is at the soft brick screen, no button combo working. Not recognized by the computer either. I'm heading out to radio shack and make a USB jig in a bit. I'd love to just flash straight up to a gingerbread ROM if I can possibly get this thing in download mode. Anybody help a brotha out!
Edit: the sim is not activated, I just run it off Wi-Fi because big red is my carrier. This is my development phone. So I can't just KIES update to whatever the newest is.
Sent from my DROID X2 using XDA App
Any firmware should work, no need to go all the way to eclair...just flash gingerbread.
Don't think its been mentioned yet but when going from 2.2 to ICS, you have to flash the rom twice to get out of the bootloops. Sounds like you were at that point but when you flashed your nandroid instead of the ICS rom again, your phone must not have liked it.
aww.W.T.F? said:
I thought you had to have GB bootloaders before you flashed any ICS roms ? I know I've read that ,then again I've read 10,000 threats and sometimes it becomes mind numbing.
Click to expand...
Click to collapse
Not all ICS ROM's require GB bootloaders. I ran THS, and am now on vibranturk's AOKP and I came straight from 2.1
I think the issue was you're supposed to flash them twice. Well that fixed it for me. I dkbhave the gingerbread boot loaders now though
Sent from my SGH-I897 using xda premium
I went from bone stock Froyo 2.2 straight to THS ICS with no problems whatsoever. So some ICS Roms doesn't need GB bootloaders.
Sent from my SGH-I897 using xda premium
I'm on the same situation as the original poster: I'm on andromeda3 and now I want to upgrade to ICS. Right now my captivate has cwm 2.5.1.2 can I flash any ICS mod from there or do I need to do something else?
See this.... TRusselo's "Guide..." that is a Stickied Thread in the Q & A Forum.
I believe u will need the Gingerbread Bootloaders...
Sent from my SAMSUNG-SGH-I777 using xda premium