Internal SD mount issue - Galaxy Tab Q&A, Help & Troubleshooting

Hello all. I have this issue posted in one of the rom threads, but seeing as there is no information on this issue for this particular device, and google has not been able to help, I thought I would create a topic incase anyone else is having this issue.
I have a vzw tab, and was happily using psirens rc1, when i attempted to update to rc2. upon doing so, i noticed titanium backup was not installing my backups (only about 6 of 120 reinstalled), so I attempted a flash back to stock dj11 using heimdall. The flash back to stock worked no problem, however, now my internal sd card is not being read. Multiple external cards work, as does the internal memory, but I am unable to get the internal card to work.
When attempting to format using normal recovery, I get this:
""e: can't mount /dev/block/mmcblk0p3
(invalid argument)
e: install_application_for_customer: can't mount HIDDENSDCARD:"
then below in yellow it says "your storage not prepared yet, please use UI menu for format and reboot actions""
Research on google mentions others having this issue with other models, as well as quick fixes that can be flashed in recovery. However, nothing exists for the tab.
I mistakenly assumed a flash to stock would revert any changes I've made while flashing custom roms, but this sd issue has me stumped. I loaded up ubuntu, and using the disk manager, it did notice the internal card, but would not let me format as it "did not exist". I am really hoping i am not screwed here. the tab does work just fine otherwise, but this issue will drive me insane until I understand how to fix it. My knowledge of adb is minimal, but if pointed in the right direction, I am more then willing to try anything to solve this issue. Any help would be greatly appreciated.

I don't know verizon system, but for gsm tabs, we use a file called a .pit file, and we repartition all of the memory. Do you have something like that?

i am familiar with .pit files. the stock files i have do not have a .pit file to use though

Related

Help, partially bricked phone

I’m hoping someone can help me out with my phone. I have been searching the forums but it’s all getting a little much and i just need some advice please.
The background
I flashed my UK sgs (i9000 i think) with a darky modded ROM which has worked fine for about 6 months my phone has become more and more unstable. Seeing as i can work Odin i thought i would flash it again and fix my issues. Then my phone crashed and wouldn’t boot up, it was stuck on the Samsung Galaxy screen, before the flashing S. I then downloaded the official 2.3.3 ROM’s from the link of official Samsung ROM’s from the thread in the General forum and flashed it. This all went fine until i rebooted my phone, it went into recovery mode fine, although i got some error messages about being unable to mount the SD cards (i can add the proper error message tomorrow for you) i cleared user data and cache, rebooted and my phone came up with a new Gingerbread ROM. This was fine until i realised it had not mounted either my Internal or External SD cards. The operating system worked fine but i could not format or mount my SD cards. I then decided to reimage the phone using the same image i had downloaded in case something had gone wrong but i got the same error messages and now i couldn’t boot into the OS. Since this has happened i have downloaded a 2.2.x ROM and flashed that but i still have the same problem. I have also downloaded and flashed the Darky Resurrection ROM but that doesn’t seem to have helped. I have asked Odin to repartition, i have used PIT 512 and a couple of others, 1 and 3 file ROM’s and if i am honest, i have got nowhere apart from a headache.
I think i have some how corrupted the internal SD card and need to reimage all the right folders and stuff but with the huge amount of official ROM’s, custom ROM’s, recovery tools and tips and tricks, my head is just swimming. Can someone please just point me in the right directions and hopefully i can have a working phone in the morning.
Many thanks in advance,
Simon
do you have any lagfix before you flash to the official 2.3.3 ROM’s ?
I'm having a similar issue w/ mine. The external sd wouldn't mount and i had kind of already started the process to update the rom. It was a dumb mistake. i knew the sd wasn't mounting so i used a different phone to mount put the updates on. Nevertheless i can't use my phone, other than to get on clockwork.
I think i may have had a lag fix on it but as i was unable to get my phone to start there was no chance of removing it before i reflashed the phone. Now i just need to get the damn internal SD working again so i can have a working phone, can you help?
Also, sorry if my main post is a little rambling, i wrote it when i got home from the pub drowning my sorrorws and may have been a little drunk...
Ok, now i've had a coffee and my headache is dying down i can add a little more info which will hopefully help.
I just downloaded GT_I9000_XWJS7_XXJPY_XEEJS1 from Darky rom user guides page on restoring a SGS to a stock ROM and followed all of the instructions. the flash in Odin goes just fine, no errors or anything, my phone the reboots, gets to the Samsung Galaxy screen and i get into the recovery mode with the following messages :
Update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media: Can't mount SDCARD
Your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
This is where i then get stuck, my phone will just get stuck in a boot loop and there seems to be no way to get into the phone. This is starting to drive me to dispair now as everything i have tried has failed badly! Does anyone have any idea how i go about recovering from this?
ok so,
-flash froyo firmware (2.2.1 might be better) then flash speedmod kernel
-get into recovery mode and check your phone's file system in lagfix option
-if it is rfs change it to ext4
-if it is ext4 change it to rfs
im not sure about this method but i ever had this preblem after i converted system to rfs (ext4 before)
hope it helps you and tell me that it works or not,thanks.
edit:wrong word
FLash darky's resurrection Rom ...that error caused by you forget disable lagfix before...
or try Flashing a full rom (3files) with .pit to repartitioning your phone... thick repartition...and thats not "Brick" if you can go download mode...
Come on lets see
I once had the same problem. Same error.message. I searched a lot in xda n finally read something which says to flash Rom with 812 pit and eclair (2.1) with 3 files. After flashing the error message came again so I relished using only pda file. Next time it rebooted normally into home screen. Hope it helps
Sent from my GT-I9000 using XDA App
OK, we're getting somewhere now but not there yet. Flashing the speedmod kernel lets me boot the phone which is further than i have got for a day so thats good, but it still won't recognisse any internal or external SD cards, if you look in the settings section it just shows options to format the sd cards.
I tried changing the filesystem to ex4 as recommended but once it reboots when it says it will go to the recovery menu to debug it just presents me with the option to convert it again as it says the filesystem for /data is RFS still.
Any ideas why it would be doing this and why it won't recognise any of the memory cards? I have also noticed that when i connect the phone to my PC now and tell it to go into Mass storage mode, it shows the drives but says there is no media there! I'm very confused by the whole thing now but at least i do have a phone again of sorts!
So i flashed Darky's resurrection ROM and this is now booting up much as the phone was with the speedmod kernel flashed but i still have the same issue where it won't recognise either the external or internal SD cards so i have no storage space at all. Is it possible i have broken them? I assume at least a bit of the internal card is working or the OS wouldn't be there but why can it not see the other half of the card?
Right, after messing about for far too long i have bitten the bulit and sending it in for repairs, i've read through a couple of posts that seem to say it's the only way to fix it so will see how good the Samsung techicians are!
Thanks for all the help though, you've got me a working phone again, even if i can't save anything on it!

i9000 Bootloop/Internal SD Corruption/Semi-Brick

I have an international i9000 that seems to be pretty solidly soft-bricked. I've recently moved back to Canada from the Middle East and was trying to enable to 850 band so I could use it with Bell. I was under the impression that the Bell SGS and the international SGS were basically the same hardware so I flashed (ODIN) a PDA/PHONE/CSC designed for the i9000m. At the time I was on the teamhacksung ICS.
Now, regardless of what I do I always end up in basically the same spot. After my most recent flash through Heimdall, following the first reboot I end up in 3e recovery with the following errors...
---------
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. please use UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0p2
Data wipe failed
---------
I've been at this for 2 days and tried pretty much everything. Flashed through Odin and Heimdall as well as from recovery off an external SD. I tried 1-click de-brick. I tried to re-partition through ADB. I get various messages in ADB depending on what I'm doing. Sometimes it's I/O errors and sometimes it says "unrecognized disk label".
I can get to recovery and download so it seems like it should be solvable. My impression is that the partition table or structure on the internal SD card has been corrupted.
Sorry if there is already a thread for this with a simple answer, I've been through a ton and couldn't find anything that worked for me. Any suggestions would be appreciated. I'm not an expert in shell but I can follow instructions. Happy to try anything at this point.
Thanks
Exactly the same issue here, so I'll just wait for a solution here.
I think I saw this problems before. Have u backed up all your data? If yes then do this 3 ways below. If you haven't backed up yet, try to do Nandroid backup from recovery mode and restore it later.
Now try this:
1. On recovery mode: wipe data/factory reset, wipe cache, in advance-wipe Dalvik cache.
2. Remove your external sd card ( put it back later if everything's fine ).
3: Set the USB debugging ON, settings-applications-development.
Hope this helps. If it does, please consider 'THANKS' button
At this point it doesn't boot into Android. It was looping for a while but now the boot animation will start, then the screen will go black and the back/options LEDs at the bottom come on. Anything on the phone is long gone after multiple wipes/flashes/etc. I'm not worried about that.
I'm pretty sure it's a problem with the partition on the internal SD. Does anyone know how to reset/repair the partition table and rebuild the partitions from ADB? Why doesn't that happen automatically when I flash from Odin/Heimdall? Isn't that the point of the "partition" toggle?
Or, could I try to convert the file system as if I were moving from a stock ROM to something like CM7 (ie...RFS to EXT4)? Would that recreate the partitions and fix this?
Thanks
Have you tried to flash a stock samsung firmware for your phone (i9000) and re partition using a 512 pit file via Odin? Have a read of the following thread below to get the latest Stock firmware for (i9000).
http://forum.xda-developers.com/showthread.php?t=1102881
Yep, I've tried several of these across froyo/gingerbread and always end up with an unmountable internal SD card. Just for fun I went and picked another one basically at random (JV6 2.3.3) and it flashed as normal and dumped me at recovery with the mounting sd card/storage not prepared error.
Are there really no takers on this? I keep reading that these are un-brickable if they still start up.
This might be worth a try, failing that you might have to take the phone to a Samsung repair agent.
http://forum.xda-developers.com/showthread.php?t=984140
i read about this problem before on darkyrom i think there was a way to bypass corrupt internal sd and use external one go check there its worth a try
Fallen04 said:
This might be worth a try, failing that you might have to take the phone to a Samsung repair agent.
http://forum.xda-developers.com/showthread.php?t=984140
Click to expand...
Click to collapse
Kiaora mate, it's a good thread to try to . Just another thread I found that may help the idea as well:
http://forum.xda-developers.com/showthread.php?t=1442684&highlight=md5+sums
Hope this helps
Hi!
I had the same problem with my i9000. I have moved /data to external SD card and everything is working now (on ICS).
I have created a manual for solving this issue. Please click "helped" and/or ads, if this helped at least a bit.
www youtube com/watch?v=zdMhYYdMB08
Best regards
fteller said:
Hi!
I had the same problem with my i9000. I have moved /data to external SD card and everything is working now (on ICS).
I have created a manual for solving this issue. Please click "helped" and/or ads, if this helped at least a bit.
www youtube com/watch?v=zdMhYYdMB08
Best regards
Click to expand...
Click to collapse
I've the same problem and I've tried everything. Not I'm sure that the internal memory is broken, so I want to use the external sd as internal memory. I'm following your manual but I can't get it to work. I tell you what I've done:
1) I've formated the external sdcard with two partitions: one of 6 GB in vfat format and the other of 8GB in reiserfs. It seems to be ok.
2) I've tried to flash with odin the JVU 2.3.6 version. Here I've some questions: Shall I check re-partition? And apply the PIT file? I've tried all combinations but I still doesn't use the external memory and I get the mmcblk0p2 error...
Any help?
Here I have posted how I have solved my problem of corrupt internal memory. Look at it and I hope someone will help.
This guide install rom to SD Card, but still have question, how to repair internal memory? i`l boot`ed rom from SD Card, but cant see internal memory, use camera, etc. who need internal memory...
Maybe are any app to fix internal memory, when android boot`ed?
In most cases I have met (including Galaxy Tab P1000 and GT-i9003) with internal memory failure or corrupted memory, the only solution is to replace the chip. If you've booted your terminal and can not use the camera or see the internal storage, you have to modify the file vold.fstab according to your android version.

[Q] SD Card Error (can't mount /sdcard)

Hello,
I've been successfully rooted my Galaxy S (i9000) since the first day I got it. Installed CM10, Slim ICS and other ROM's with no problem. A few days ago I tried to flash the latest (beta if I'm not mistaking) of Slim ICS and somehow everything got screwed. Sadly I don't have a Titanium Backup.
The problem is with the internal memory I guess, as I can use an external SD card (The one that you place in the slot). I've tried everything from Ezboot, Darky ROM, pit files, and various stock kernels and ROMs with no success. I've also tried flashing a dbdata file with no success. From what I've read, the partitioning seems to be off, and that *could* be the problem. The errors I've got are:
When trying to wipe data/factory reset:
E:format_volume: rfs format failed on /dev/block/mmcblk0p2
While trying to install any rom (CM/Slim ICS):
E: Error in /sdcard/file_name.zip - Where file_name is the name of the rom archive.
Status (0)
Installation aborted.
The one thing I did not try is the ADB stuff for which I haven't found a proper guide. I've also tried various fixes from previous threads and I still haven't got it to work. Any help or pointers will be much appreciated. Thank you.
PS: I can enter recovery and download modes. Is the phone bricked?
UPDATE: I've managed to install CM9, but after it boots it sais Encryption Unsuccesfull.
Bad news, I had a similar problem...
http://forum.xda-developers.com/showthread.php?t=1895224
But for now try this
http://forum.xda-developers.com/showthread.php?t=1841250
Sent from my GT-I9000
Thanks a lot for the reply. Either I did something wrong or I don't know.. the guides don't work. Any other ideas?
Bump...
I had something similar and I found that when booting my phone what helps is keeping the external SD card outside and only after some time putting it back in...
the way I check it is that I have direct call to contacts in my Widgetsoid notification widget and only after they show the image of the person and not only a blank square then I enter my SD card.
but It always doing problems with my ringtones and making them Unkown so every reboot I have to rearrange them.
You could also check it by using apps that don't run with SD card... like camera, gallery, Waze and such.
Hope it works!

Need help mounting /system and /data from external SD. Internal SD is dead :/.

Hello,
I normally can get by pretty well, and I have done numerous searches before posting for help. This time I have really run into a brick wall, and I really need help here.
Basically, I did something really stupid where I did not know that the phone had been booting off a external SD (my mom gave it back to me like that). Actually, I suspected that it did because the phone would have not booted without the card, however, I could flash my phone even if I removed the external SD card (as if the internal SD were there, but it wasn't), but it had always required me to insert the card back in for it to reboot from a flash. So I thought maybe internal SD was fine.
Originally, I had a Samsung 8gb class 6, but I wanted to change it to a 32gb class 10 ( to help the OS run smoother IF it were running on external SD). This is where I made a great mistake; I formatted the 32gb card and made 3 partitions. The first one is in FAT32 of 24 gb, 2nd is in EXT4 4gb, 3rd is the rest in EXT 4 as well. The original setup that was working had about 5.5gb in FAT32 and about 1.88gb of EXT(not sure which). The mistake was that I also formatted the 8gb card as well. In chronological order, these were what has happened:
1. I did a Odin stock reset to 2.3.5 with CWM injected
2. Installed Corn Kernel
3. Formatted both external SDs and repartition as mentioned above
4. At this point, I didn't know there was an issue. CWM sees the external SD and I tried to install CM 10.3 since I read in one of the threads that JB has a weird file systems and it needed to be installed twice to fix sdcard0 and sdcard1
5. CM10.3 installed kernel, and failed afterward since there was no /system and /data. At this point, I have Neat Kernel installed and lost bootloader along with fastboot and cannot access download mode.
6. I have tried to change EXT4 to EXT3 or EXT2 to see if there would be any luck in file system recognition, but no luck
7. The only way I can connect to the phone was through ADB, and verified that my internal SD card was dead because mmcblk0 was not there when I removed external SD
8. I tried to mount mmcblk0p1 (4gb EXT4 partition) and mmcblk0p2 as /system and /data, but I had been getting an error
9. I tried to use USB mount in TWRP, but no additional drive showed up (confirmed dead internal SD)
9. I tried to look for vold.fstabs but /system does not exist. The only *.fstabs file founds were in /etc file (not /system/etc) and is, for example, aries.fstabs
I know for the fact that it can be done because the phone was working before, but I really don't have enough linux knowledge or the what the phone looks at in chronological order in order to figure out how to remedy this. I would really appreciate if someone can guide me to a right direction. Thank you.
Below are major references I have gone through (not including youtube videos, etc..):
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=1897918
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=2199215
http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
http://forum.xda-developers.com/showthread.php?t=911228
http://forum.xda-developers.com/showthread.php?t=1463756
http://forum.xda-developers.com/showthread.php?t=1241574
http://forum.xda-developers.com/showthread.php?t=845708&page=2
I see it's been a couple weeks with no update but if you're still stuck this may help. I had similar issues trying to flash zips from recovery. I kept getting the "can't mount" error message and what I figured out is that the access to CWM recovery via the update method I'd used was pretty much loaded up in cache, thus I couldn't mount . Getting back to total stock first may help. This is the basic rundown I performed to get my cappy back up ... currently on JB. Granted, I didn't go about reformatting drives as you did.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed
Everything is pretty much dependent on using them in Windows and still active in download links if you do some searching.
Hope it helps!
Aimless Rambler said:
I see it's been a couple weeks with no update but if you're still stuck this may help. I had similar issues trying to flash zips from recovery. I kept getting the "can't mount" error message and what I figured out is that the access to CWM recovery via the update method I'd used was pretty much loaded up in cache, thus I couldn't mount . Getting back to total stock first may help. This is the basic rundown I performed to get my cappy back up ... currently on JB. Granted, I didn't go about reformatting drives as you did.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed
Everything is pretty much dependent on using them in Windows and still active in download links if you do some searching.
Hope it helps!
Click to expand...
Click to collapse
Thanks for the reply; I constant checked this site for a week or so with no response, so I gave up. I would have been able to go with your method if my download mode worked. Basically, I cannot go into either download mode or fastboot. I tried to flash different kernels to try to enable it, but I kept running into error 0 even after I changed the binary. Any idea? Thanks.

[Q] Need help mounting /system and /data from external SD. Internal SD is dead :/

Hello,
I figure someone here might be able to help since most of where I found information regarding my issue came from this subforum. My phone is i897 (Captivate), but I think it should be similar; I posted there as well but no luck .
I normally can get by pretty well, and I have done numerous searches before posting for help. This time I have really run into a brick wall, and I really need help here.
Basically, I did something really stupid where I did not know that the phone had been booting off a external SD (my mom gave it back to me like that). Actually, I suspected that it did because the phone would have not booted without the card, however, I could flash my phone even if I removed the external SD card (as if the internal SD were there, but it wasn't), but it had always required me to insert the card back in for it to reboot from a flash. So I thought maybe internal SD was fine.
Originally, I had a Samsung 8gb class 6, but I wanted to change it to a 32gb class 10 ( to help the OS run smoother IF it were running on external SD). This is where I made a great mistake; I formatted the 32gb card and made 3 partitions. The first one is in FAT32 of 24 gb, 2nd is in EXT4 4gb, 3rd is the rest in EXT 4 as well. The original setup that was working had about 5.5gb in FAT32 and about 1.88gb of EXT(not sure which). The mistake was that I also formatted the 8gb card as well. In chronological order, these were what has happened:
1. I did a Odin stock reset to 2.3.5 with CWM injected
2. Installed Corn Kernel
3. Formatted both external SDs and repartition as mentioned above
4. At this point, I didn't know there was an issue. CWM sees the external SD and I tried to install CM 10.3 since I read in one of the threads that JB has a weird file systems and it needed to be installed twice to fix sdcard0 and sdcard1
5. CM10.3 installed kernel, and failed afterward since there was no /system and /data. At this point, I have Neat Kernel installed and lost bootloader along with fastboot and cannot access download mode.
6. I have tried to change EXT4 to EXT3 or EXT2 to see if there would be any luck in file system recognition, but no luck
7. The only way I can connect to the phone was through ADB, and verified that my internal SD card was dead because mmcblk0 was not there when I removed external SD
8. I tried to mount mmcblk0p1 (4gb EXT4 partition) and mmcblk0p2 as /system and /data, but I had been getting an error
9. I tried to use USB mount in TWRP, but no additional drive showed up (confirmed dead internal SD)
9. I tried to look for vold.fstabs but /system does not exist. The only *.fstabs file founds were in /etc file (not /system/etc) and is, for example, aries.fstabs
I know for the fact that it can be done because the phone was working before, but I really don't have enough linux knowledge or the what the phone looks at in chronological order in order to figure out how to remedy this. I would really appreciate if someone can guide me to a right direction. Thank you.
Below are major references I have gone through (not including youtube videos, etc..):
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=1897918
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=2199215
http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
http://forum.xda-developers.com/showthread.php?t=911228
http://forum.xda-developers.com/showthread.php?t=1463756
http://forum.xda-developers.com/showthread.php?t=1241574
http://forum.xda-developers.com/showthread.php?t=845708&page=2
PMrjn83 said:
Hello,
I figure someone here might be able to help since most of where I found information regarding my issue came from this subforum. My phone is i897 (Captivate), but I think it should be similar; I posted there as well but no luck .
I normally can get by pretty well, and I have done numerous searches before posting for help. This time I have really run into a brick wall, and I really need help here.
Basically, I did something really stupid where I did not know that the phone had been booting off a external SD (my mom gave it back to me like that). Actually, I suspected that it did because the phone would have not booted without the card, however, I could flash my phone even if I removed the external SD card (as if the internal SD were there, but it wasn't), but it had always required me to insert the card back in for it to reboot from a flash. So I thought maybe internal SD was fine.
Originally, I had a Samsung 8gb class 6, but I wanted to change it to a 32gb class 10 ( to help the OS run smoother IF it were running on external SD). This is where I made a great mistake; I formatted the 32gb card and made 3 partitions. The first one is in FAT32 of 24 gb, 2nd is in EXT4 4gb, 3rd is the rest in EXT 4 as well. The original setup that was working had about 5.5gb in FAT32 and about 1.88gb of EXT(not sure which). The mistake was that I also formatted the 8gb card as well. In chronological order, these were what has happened:
1. I did a Odin stock reset to 2.3.5 with CWM injected
2. Installed Corn Kernel
3. Formatted both external SDs and repartition as mentioned above
4. At this point, I didn't know there was an issue. CWM sees the external SD and I tried to install CM 10.3 since I read in one of the threads that JB has a weird file systems and it needed to be installed twice to fix sdcard0 and sdcard1
5. CM10.3 installed kernel, and failed afterward since there was no /system and /data. At this point, I have Neat Kernel installed and lost bootloader along with fastboot and cannot access download mode.
6. I have tried to change EXT4 to EXT3 or EXT2 to see if there would be any luck in file system recognition, but no luck
7. The only way I can connect to the phone was through ADB, and verified that my internal SD card was dead because mmcblk0 was not there when I removed external SD
8. I tried to mount mmcblk0p1 (4gb EXT4 partition) and mmcblk0p2 as /system and /data, but I had been getting an error
9. I tried to use USB mount in TWRP, but no additional drive showed up (confirmed dead internal SD)
9. I tried to look for vold.fstabs but /system does not exist. The only *.fstabs file founds were in /etc file (not /system/etc) and is, for example, aries.fstabs
I know for the fact that it can be done because the phone was working before, but I really don't have enough linux knowledge or the what the phone looks at in chronological order in order to figure out how to remedy this. I would really appreciate if someone can guide me to a right direction. Thank you.
Below are major references I have gone through (not including youtube videos, etc..):
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=1897918
http://forum.xda-developers.com/showthread.php?t=2057004
http://forum.xda-developers.com/showthread.php?t=2199215
http://forum.xda-developers.com/showthread.php?p=30415128#post30415128
http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335
http://forum.xda-developers.com/showthread.php?t=911228
http://forum.xda-developers.com/showthread.php?t=1463756
http://forum.xda-developers.com/showthread.php?t=1241574
http://forum.xda-developers.com/showthread.php?t=845708&page=2
Click to expand...
Click to collapse
Have you looked over this guide ? or this ?
Höhenheim said:
Have you looked over this guide ? or this ?
Click to expand...
Click to collapse
Thanks. I'll try when I get home to my desktop. For some reason, my laptop does not recognize the phone through adb. It shows "SGH-i897" in device manager with an exclamation mark. And yes, I have tried quite a few drivers, etc... :/
I might need to try this...
http://forum.xda-developers.com/showthread.php?t=1761968
Höhenheim said:
Have you looked over this guide ? or this ?
Click to expand...
Click to collapse
I just had a chance to look at it more thoroughly. The biggest problem for me is that my phone does not have an OS, and it's on semaphore kernel where I cannot access download mode nor fastboot. I have tried to install gingerbread kernel to try to recover download mode/fastboot (speedmods), but I kept running into error 0. I have also tried to modify the su.binary, but that didn't work :/. Any idea how to start? Thanks.
PMrjn83 said:
I just had a chance to look at it more thoroughly. The biggest problem for me is that my phone does not have an OS, and it's on semaphore kernel where I cannot access download mode nor fastboot. I have tried to install gingerbread kernel to try to recover download mode/fastboot (speedmods), but I kept running into error 0. I have also tried to modify the su.binary, but that didn't work :/. Any idea how to start? Thanks.
Click to expand...
Click to collapse
Based on your earlier comments on the partitions failing to mount, you should format: system, data, datadata, cache.
gsstudios said:
Based on your earlier comments on the partitions failing to mount, you should format: system, data, datadata, cache.
Click to expand...
Click to collapse
Well, I tried. If it doesn't mount at all, how can you format?

Categories

Resources