Based off of the base Samsung GT-I7510 Source.
Works with Stock 3.1 and TW UX ROMS
I am not at all responsible for what you do to your tab by installing and using this.
You must have ROOT! Also clearing cache and dalvik cache I've found does wonders after flashing.. #justsayin
07/28/2011
Added 1.504ghz for more stability
Changed voltages for stability
Fixed SETCPU Bug
Fixed Voodoo sound.. my bad..
Max GHz is automatically set to 1.2GHz to avoid stability issues. You can set them in SetCPU to whatever you like.
07/27/2011
Rebased off of pershoots but with my modifications... more to come..
360 controller should work..
Reports are good with the UX TW ROMS...
Removed GPU overclocking until I can see if it is actually helping..
Fixed charging and PC mounting issue..
Runs a lot smoother with the Ubuntu port so far
07/22/2011 Update
Included all of my modules in init.rc which means all the modules autostart and no need to use terminal to start by hand.
Fixed some install script issues.
Old update:
Project Voodoo's Voodoo sound v10 thanks to supercurio (download voodoo control app from market)
CIFS/NTFS
We now haz 1.6ghz OC! :_con: :gasp:
Compiled and included the XBox 360 controller module... Haven't tested due to no USB Dongle yet..
Lowmemory killer tweaks
Use the Latest SETCPU to change Voltages and Overclocking. It now supports full voltage control.. Im currently on 2.2.4. Available HERE.
Updated to the .4 patch.. mutch smoother..
Todo:
Suggestions??
Special thanks to:
Khasmek for dealing with my ranting...
Xoomdev also for dealing with my ranting...
R2doesinc also for dealing with my ranting..
Birdman for his words of wisdom...
Drod2169 for helping me debug voltage control
Captainkrtek for dealing with my ranting also...
To all of my testers.. couldn't do it without you.
If you would like to donate for my work and to the OMFGB/OMGB build box which I own and run click HERE
Forgot to post my githib link.... I apologize...
Http://www.githib.com/poitee
DO NOT FLASH with rom manager.. Reported issues.
Get it HERE
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Is this compatible with 3.1 w/Touchwiz?
Testing now. Not sure if UV works. Is it suppose to? I get the prompt of selecting states not supported buttons inactive or not supported when I open up voltage control. Thanks for the kernel.
Great work !, any chance for pimpmycpu support?
I'm starting to think I got the runt of the litter as far as the cpu goes...
Hard reset @ 1GHz for me unfortunately...but voodoo sounded great until the tab locked up heh.
Source? GPL?
Good to see another Dev for the 10.1. Will try this out later.
fit333 said:
E.p.I.c.. got a 2880 quadrant.
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
I'm getting 2660 on a "stock" touchwiz
I love to see 4k quadrant score like xoom
So it is working on TouchWiz?
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Working on Touchwiz or not? Anybody? Ill take the leap if nobody else has...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Did you do a full wipe? I had the same with another Oct kernel but I wiped and its good now.
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
Works great.. Good work.. But dosent seem to make it to 1.6ghz. Setcpu goes to 1600mhz but the scaling still says 1400mhz?
kirdroid said:
Lot of lag, unresponsiveness for me on touchwiz rom :-( ..... And I didn't change any setting, just flashed the kernel.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Working here on TouchWiz. However, im not getting the very high quadrants scores. Best I go so far was 1800. Possibly a wipe and install will work.
SellswordShev said:
You need to flash a pershoot kernel that has a ramdisk image before you may flash this on Touchwiz (last one was posted here http://droidbasement.com/db-blog/?p=2160). Flash the 071311 kernel, then flash this on top, should work.
Click to expand...
Click to collapse
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
FrezoreR said:
Hmm but what about the statenent: "This will not work for TouchWiz UX" ??
Click to expand...
Click to collapse
It's just pershoot's official stance. He does not want to provide support for it, but if you look over his release thread you will see him explain how to get it to work on touchwiz (the short version is in my post above)
The highest quad score I got was 1939 maxed out...
Sent from the best phone on the planet (SGS2) running the best ROM on the planet (Cognition S2)!
I'd like to try this as well on Touchwiz but I am waiting for a definitive confirmation that it works well? I assume we just install the zip file from recovery? Also if it doesn't work can someone outline the process for going back, do I just re-install the Touchwiz zip package?
Thanks,
Richard
Related
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
You're the stuff!
ttabbal said:
This is based on the 959d source, hopefully closer to our phones and hopefully better on battery. It's using the same patches as the Dragon kernel posted earlier, speedmod, oc, fast scaling, voodoo sound.
Stock clock: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-v1.0.zip
OC 1.28Ghz: http://dl.dropbox.com/u/7320380/Dragon-Kernel-959d-OC-v1.0.zip
These should be considered experimental. I have run them both for about an hour, so far so good.
Click to expand...
Click to collapse
Do you have BLN integrated into your kernels?
birgertime said:
Do you have BLN integrated into your kernels?
Click to expand...
Click to collapse
Yes, BLN is available in both of them.
jumaaneface said:
yay. will report back on battery life after some use. i think i need to donate to u now. god ive been stingy lately
Edit: do u have a paypal???
Click to expand...
Click to collapse
I added the donate thing to xda. Thanks for asking.
Can this be flashed over voodoo?
Sent from my SGH-T959
Internal memory not mounting...
The internal memory is not mounting at all. It is not mounted by the phone or by the PC.
Seems like a good idea. Flashing now.
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
After I flashed this I soft bricked and could not get back into cwm but I used odin flashable voodoo kernel and everything was fine I'm going to try this again
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Dan_Brutal said:
This kernel is injected with voodoo, correct?
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Yes, voodoo is enabled.
ttabbal said:
Yes, BLN is available in both of them.
Click to expand...
Click to collapse
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Everything working great here. Brillliant work! Thanks for the effort. Oc'ed and voodoo'd...w/nero 4.1
A reminder to noobs, flash with recovery in power menu options.
Sent from my SGH-T959 using XDA App
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You should have a BLN Settings app installed with the kernel.. use that.
MTC44 said:
I'm a BLN rookie...how do I enable it? I looked around in recovery and couldn't find it.
Click to expand...
Click to collapse
You need to run the BLN control app. It was supposed to be installed with the kernel. Just open the app and "Activate BLN". If the app wasn't installed for you, you can download it here.
U need a app
MTC44 said:
I used the Dragon kernel from the i9000 source. The OC version never worked, but the non-OC version worked extremely well.
Same issue it appears with the 959d source. i don't have issues with other OC kernels...any ideas why this would be happening?
Click to expand...
Click to collapse
It's probably the type of OC, they aren't all the same. If you have an OC mod that works good for you, and you want to see it in my kernel or any other, you need to get that dev to release the source. Some don't, and I can't reproduce what they do if I don't have the code. This OC is based on a patch from the i9000 forums, it works, but is less universal than some of the others on Vibrant hardware.
For the record, my source is posted here: https://github.com/travistabbal
I'm uploading the source for the 959d kernels now.
Great work
I think u actully did it with this one, the battery seems to be way better then the last 2.7 kernel. Im running oc and voodo
I downloaded mik kernel from his git repo and I patched it to add BFS Scheduler (0.404 patch works very well) and to set smartass governor to default.
I use it on CM7 Beta 6.5.2 and it works!
DOWNLOAD: http://www.multiupload.com/917W030Y00
EDIT: ZIP file is unsigned!
What is BFS scheduler used for and how does that help CM7 6.5.2 apart from setting default governor, Waiting for the patch, Thanks.
bfs - performance wise
cfs - multi tasking wise
i hope tun.ko from mik' s rom can be on this kernel since the tun.ko on mik's,rom is not updated, openvpn is not working, and i need it badly
Sent from my LG-P500 using Tapatalk
I didn't used BFS because of strange perfomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
Click to expand...
Click to collapse
Yeah there was an issue with dynticks and low CONFIG_HZ (phones were affected since they shouldn't really go above 100); it should have been fixed in bfs 404 I've been using it since your 6.5.2 release and no issues have arose (and no groundbreaking performance improvements either).
@cmangalos: actually, CFS is the default kernel scheduler, and is therefore supposed to be very scalable (i.e. works well enough on machines ranging from 1 to thousands of (logical) cpus), while BFS uses a different approach which privileges user interaction and minimizes latency (hence *theorically* improving system responsiveness), at the cost of lower throughput.
for anyone interesting here's an enlightening read: http://www.cs.unm.edu/~eschulte/data/bfs-v-cfs_groves-knockel-schulte.pdf
A.
Indeed! I've tried with higher CONFIG_HZ but nothing good came off it, but in my desktop HZ as 1000 is a good boost.
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
Click to expand...
Click to collapse
With 0.404 there aren't bugs... if you want, you can release a new version with CFS and a version with BFS... or maybe you can release flash zip kernel! Or maybe i can do it for you!
mik_os said:
I didn't used BFS because if strange perdomance issues in GB. If this one is ok I maybe try to use it.
About tun.ko: in 6.5.2 it has been built directly in kernel, but I don't have openvpn to test it.
Click to expand...
Click to collapse
im always using openvpn, and when i started to use cm7 roms, tun.kos are always not compatible with the kernel, if you want mik, i can give you servers, username and pw, and use openvpn setting app found in market
Sent from my LG-P500 using Tapatalk
DookMatt said:
I downloaded mik kernel from his git repo and I patched it to add BFS Scheduler (0.404 patch works very well) and to set smartass governor to default.
I use it on CM7 Beta 6.5.2 and it works!
DOWNLOAD: http://www.multiupload.com/917W030Y00
EDIT: ZIP file is unsigned!
Click to expand...
Click to collapse
if its unsigned, do i need to sign it before flashing?
if yes, how?
dongimin2 said:
if its unsigned, do i need to sign it before flashing?
if yes, how?
Click to expand...
Click to collapse
no you dont need to. but you will have to uncheck the option "toggle verify signature" in the recovery. thats all
Works great can't test wifi right now but everything else works, good benchmark scores (not very high Oc 245/768 performance kp beyond that ). Testing it further.
Sent from my LG-P500 using XDA Premium App
Do I have to wipe something before flashing?
kovidd said:
Do I have to wipe something before flashing?
Click to expand...
Click to collapse
Not necessary .. but you can wipe dalvic cache.
Sent from my LG-P500 using XDA Premium App
i wonder if its working with open optimus rom v1.148?????????
gkalenis said:
i wonder if its working with open optimus rom v1.148?????????
Click to expand...
Click to collapse
before you wonder, read some posts/threads about the optimus series and kernel variants
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Zerobarat1 said:
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Click to expand...
Click to collapse
stutter must not be come with the bfs ... it can have more reasons i think.
Zerobarat1 said:
Even though BFS has nice loading times and boot times , it sucks in video playback . Just tested it and it shocked me at how many times it would stutter
Click to expand...
Click to collapse
I don't get any stutter its all butter smooth. Will test further though.
Sent from my LG-P500 using XDA Premium App
@DookMatt, is it possible to create a kernel that enable blink like void?
heiszakee said:
@DookMatt, is it possible to create a kernel that enable blink like void?
Click to expand...
Click to collapse
blink is an app. "Missed message flasher free"
Doom Kernel V0.3
Apparently on the Xperia forums DooMLord has a kernel out called DooMKernel as well. This is in no way affiliated with that. I may change mine to Doom Boot or Doomed Kernel but for now he asked me to make a note like this so here it is.
First, I would like to give a big THANKS to Echts for helping me with repacking the boot.img and get this thing bootable...
Second, THANKS to tekahuna for the OC modules
This kernel contains OC and non OC versions. Speed tweaks, memory tweaks and network tweaks have been included after V0.1. All the non OC versions include all the tweaks.
V0.3 Now increases SDcard read write cache from 128kb to 4096kb
I appreciate any feedback I can get from this. It will work with ANY FROYO rom this is NOT a GB kernel.
How to install:
1) Download
2) Flash in CWM
3) Enjoy your OC kernel
Doom Kernel V0.3 http://www.multiupload.com/ZK4A77GW6D
No OC V0.3 http://www.multiupload.com/DFHEJI7H2I
Doom Kernel V0.2: http://www.multiupload.com/GXIC7IOXH6
No OC V0.2: www.multiupload.com/ZQ6501RZMX
Doom Kernel V0.1: http://www.multiupload.com/MI9ZF4YOU0
Stock Kernel: http://www.multiupload.com/DM2PKFCNSV
CHANGELOG
V0.3 Added SDcard Read/Write speed increase
V0.2 Added lowmemorykiller settings
Added ADJ tweaks
Added Network tweaks
Tweaked Wifi supplicant scan settings in kernel itself
No more lags when installing apps from market.
V0.1 Stock Kernel with OC at 1.18GHz
I tip my hat to you sir. Looking forward to tinkering with kernel code and working on optimizations along the way.
What's the maximum overclock rate? 1.5GHz?
Will thus also work on Thriller rom?
Sent from my LG Thrill 3D using XDA Premium
itskapil said:
What's the maximum overclock rate? 1.5GHz?
Click to expand...
Click to collapse
Nooooo as of right now, testing tekahuna's modules, 1.23Ghz was as far as I could push without reboots and FC's.
Sorry forgot to mention that. Right now it is at what tekahuna calls the sweet spot of 1188MHz or 1.18GHz. That is the max as this is just a test speeds will increase slowly. Other tweaks and features will be added slowly.
Cthater said:
Will thus also work on Thriller rom?
Sent from my LG Thrill 3D using XDA Premium
Click to expand...
Click to collapse
Yes it will work with any of the thrill roms should work with O3D roms as well AS LONG AS IT IS FROYO this will not work on GB it is a froyo only kernel. Any rom in the Thrill development section will be fine.
How did you manage to get the boot.img repacked? I started trying to use mkimage instead of mkbootimg but to no avail. I have tinkered with all the different settings. Basically I'm just curious what you put for -a , -e , -d , and -C , because I can't get mine to repack. Also, how did you order the various inputs. Because, I just keep getting a usage output. And when I don't get that and it seems to run, still no new boot.img is created.
Thanks.
Sent from my LG-P925 using xda premium
I will be writing up a nice tutorial here soon. You have to edit unpack-bootimg.pl and like you said the mkimage command has to be just right. Once you get it down the unpacking and repacking is a snap takes no time. It's the adjusting things and what not that becomes the most work.
Beta version 0.2 now contains OC at same clock speed (will release different clock speeds once testing phase is done) also has adjustments to lowmemorykiller, adj, network speeds. Slowly but surely moving along don't want to do too much at once just tweaking a bit then test, tweak a bit more then test. Safest route.
Thank you!
Word. A good how to is definitely needed for working with the Thrill Boot.img. I figured that it couldn't be too difficult. I just feel like i have tried every possible combination for the repacking. But im sure i am just missing something simple. Im assuming the Unpack edit is to change the initial data stripping from 2048 to 76? For now im gonna just include your boot.img that you posted here in my rom im working on (as long as that is cool with you...).
Props to you though for figuring it out...
And thanks to Echts and others for their assistance...
Thanks dude!
So glad that the thrill development scene is finally starting to take off!
Please do, anything I release is free and open to use. That's why we are here right?
And I didn't figure the repack out, it was armcee (sp?) Ricardo that figured it out, he just merely passed the info down the line it finally made it to me lol I actually gave credit to Echts over on O3D forum because he passed the info on to me.
I have to say, the V0.2 kernel definitely speeds things up. Apps run faster, load faster, it's nice... very nice. This is what I have been waiting for, kernel tweaking.
How is the battery useage with the kernel?
Sent from my LG-P925 using XDA App
Great, im so happy to see some dev for this phone. A big thank you to everyone! I just flashed the kernel, so far so good.
Sent from my LG-P925 using XDA App
ueshada said:
How is the battery useage with the kernel?
Sent from my LG-P925 using XDA App
Click to expand...
Click to collapse
Its kind of hard for me to tell because I have been flashing a lot of things. For what I am doing it seems to last a while. Try it out if you don't like it flash back to stock.
Testing the new Kernel, so far i love it, running SetCPU to keep tabs on CPU... Excellent job @Urabewe
cant wait to see if we can get more frequencies to test the OMAP4 processor... make this phone FLY!!!
nice kernel man but Battery drain seems a little high. well it is a no brainer when OC it take more battery power
Yes it's still a work in progress I did notice a bit of extra drain, I am going to release another kernel that's is not OC but contains the speed boosts. I'm hoping that will cure a bit of the battery problem while still keeping the what I think is incredible speed boost.
Also, can anyone else confirm that the delay/lag while installing apps from the market is basically gone with governor on hotplug max at 1188? I have installed about 5 apps and was trying to see how bad the lag was and didn't really experience any.
Well it's official I am calling it a feature... no more lags when installing from market. Phone remains nice and smooth. This kernel combined with Doomed Froyo Slim (which btw includes this kernel in the rom) has no lags and if you can find any lags in any programs or with the launcher let me know.
...fighting ninjas at night, talkin' about this and that.
Urabewe said:
Well it's official I am calling it a feature... no more lags when installing from market. Phone remains nice and smooth. This kernel combined with Doomed Froyo Slim (which btw includes this kernel in the rom) has no lags and if you can find any lags in any programs or with the launcher let me know.
...fighting ninjas at night, talkin' about this and that.
Click to expand...
Click to collapse
Is this kernel working with optimus 3D 2.3.5?
Urabewe said:
Yes it will work with any of the thrill roms should work with O3D roms as well AS LONG AS IT IS FROYO this will not work on GB it is a froyo only kernel. Any rom in the Thrill development section will be fine.
Click to expand...
Click to collapse
No Froyo only
It will work with ANY FROYO rom this is NOT a GB kernel.
Click to expand...
Click to collapse
No froyo only.
Not being rude at all but please read through at the very least the 1st post before asking questions. 2.3.5 is GB this only works with 2.2.2 I will be releasing a 2.3.5 GB kernel soon that one you will be able to use.
...fighting ninjas at night, talkin' about this and that.
Hi guys, Decided to make a new thread as since you guys asked for it
The kernel is based off the work of Arco, forfivo and castanaIT.
Id like to also note please use extra caution when useing extreme edition kernels. (the overvolt).
For those of you that decide you dont want this kernel you can use this to restore back to core2's 11-09 2.6.35 kernel without doing a full rom flash.
When using either kernel 1.7ghz is most likely gonna be the highest you want to run on. @1.8 we either become unstable or get too much heat.
This part im just going to relink the old build for my first attempts. They mostly didnt work.(just for archiveing purposes)
Beta v1, Beta v2, Beta v3, Beta v4
In this section ill list the newer builds and what they added.
Beta 5.2
Adds Govs: brazilianwax, intellidemand, interactivex, lagfree, lazy, lionheart,
lulzactive, ondemandx, savagedzen, scary, smartass1/2, smoothass, wheatley
Adds OC up to 1.8( 1.8 only stable in OV edition but still included just because)
Beta v5.2 + Overvolt v2
Adds the same as above but uses more volts for the higher frequencies to try and make them more stable.
(Was later reported that its stable but gets pretty Hot)
Adds same as above but lowers the volts a little to try and find a happy spot between stable and temps.
Source- http://github.com/doadin
_____________________________________________________________________________________________
Overall Feature list:
Govs:
brazilianwax
intellidemand
interactivex
lagfree
lazy
lionheart
lulzactive
ondemandx
savagedzen
scary
smartass2
smoothass
wheatley
BFS (Brain **** Scheduler)
______________________________________________________________________________________________________________________
reserved
Things from users
Note: i do not suppport nor will i trouble shoot things for users of anything listed here.
Apps found useful by other users of this kernel:
link to the tweaking app
This is the greatest kernel ever, use it! I promis you wont be disappointed!
I love it, however beta 5 broke wifi for me, but it doesnt for some, so please try it!
Added a link to the wiki http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G#Custom_Kernels
Beta5 is what broke wifi for me as well
-sent from outerspace
Running the latest CM9 stable with Beta 5 kernel OC to 1.4GHz everything working here. (WiFi, camera, video, everything)
Can't wait for the next CM9 stable with the additional camera fixes. Combined with this kernel will be great!
Sent from my SGH-T679 using xda app-developers app
Look forward to testing this
It's nice to see more development! 2 overclockable kernels in less than a week, after a year of nothing like this Keep up the great work, guys!
Just wanted to chime in to say I just flashed CM9 (stable 11-09), then flashed gapps, and the beta 5 kernel - all within the same CWM session. My Wifi is working just fine. Fast and stable so far Lovin' it! Great job. I especially love all the various governors - that'll give me a lot to play with today
Hey guys, im working on makeing beta 6. When i tested the build wifi didnt work, however i havent changed anything with the wifi so if anyone whos willing to do wipes and stuff possibly try this build? http://d-h.st/ouL
I would do the wipes and stuff my self but this is my only phone/daily used device. So wipeing isnt exatly something id like to do. I did try wipeing cache/fix permissions but that didnt work. Id guess it would work with wipes cause all the wifi code is untouched from beta 5, but before i go telling people to wipe id like to know if that works. Some people said beta 5 broke wifi too which i guess is possible as with this beta 6. However i believe it to be due to not wipeing not the kernel it self.
I clean installed 9/28 plus gapps and this but it broke wifi and usb connection. I chose smartassv2 plus 368 min and 1.4 max and it immediately froze. Am gonna download the latest stable and do this again.
Mwas. said:
I clean installed 9/28 plus gapps and this but it broke wifi and usb connection. I chose smartassv2 plus 368 min and 1.4 max and it immediately froze. Am gonna download the latest stable and do this again.
Click to expand...
Click to collapse
I figured out what kept breaking wifi, it was a noob mistake by me. Fixing it and uploading new builds now.
Edit: Beta 6.3 released, Overvolt edition comeing soon.
cars1189 said:
I figured out what kept breaking wifi, it was a noob mistake by me. Fixing it and uploading new builds now.
Edit: Beta 6.3 released, Overvolt edition comeing soon.
Click to expand...
Click to collapse
Can I flash this over without rom wipe?
Mwas. said:
Can I flash this over without rom wipe?
Click to expand...
Click to collapse
Yes, but it's usually a good idea to wipe cache+dalvik.
Just flashed and booting up now.
Btw, absolutely loving the Lulzactive governor. Maybe you should update the OP with a link to the tweaking app
Bloodflame said:
Yes, but it's usually a good idea to wipe cache+dalvik.
Just flashed and booting up now.
Btw, absolutely loving the Lulzactive governor. Maybe you should update the OP with a link to the tweaking app
Click to expand...
Click to collapse
All future builds should work fine without a rom wipe or cache/dalvik as of right now.(beta6)
Sure ill add it to my second/reserved post for now.
Also gonna update the OP with links to 5.1 which is an updated beta5 that shouldnt break wifi.
Beta 6.3 overvolt edition is out now too.
I wiped davlik/cache and flashed beta 6.3. Now wifi works and my previous issue with usb was due to a faulty cable. Only problem now is the phone freezes when I set max to 1.4. 1.3 works fine so am guessing that's my sweet spot.
Mwas. said:
I wiped davlik/cache and flashed beta 6.3. Now wifi works and my previous issue with usb was due to a faulty cable. Only problem now is the phone freezes when I set max to 1.4. 1.3 works fine so am guessing that's my sweet spot.
Click to expand...
Click to collapse
Glade to here its fixed/figured out. sorry to hear 1.4 isnt working for you,I just ran a benchmark @1.4 and it ran fine, i believe this is where the every hardware is different.
Just re-read your previous post and saw you used smartass gov. Thats the same one i used. You may wana play with some other govs it may or may not effect the frequency you can use. It probably wont and smartass is a good gov.(imo) but just a thought.
cars1189 said:
Glade to here its fixed/figured out. sorry to hear 1.4 isnt working for you,I just ran a benchmark @1.4 and it ran fine, i believe this is where the every hardware is different.
Just re-read your previous post and saw you used smartass gov. Thats the same one i used
Click to expand...
Click to collapse
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Mwas. said:
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Click to expand...
Click to collapse
As stated in the OP 6.3 Adds:
GPU frequency changing
Added V(r) and SIO schedulers
You can use whatever version you want. 5.1 fixes wifi for people who had problems with beta 5. So any of the 5.1 - 6.3 builds are ok to use its just what you want out of the kernel. Each build is a new kernel you can flash w.e. you want and doesnt have to go in any order. Builds older than 5.1 are not recommened to use but they are basicly unchanged from the Kernel you get in core2idiots latest cm9.
Mwas. said:
Yea I used smartass. btw is there a difference in 6.3 and 5.1 and should I flash 5.1 since I used 6.3?
Click to expand...
Click to collapse
6.3 just fixes wifi and adds a couple I/O schedulers. You might as well just stay with it. Even if you don't use the schedulers, there's no harm in staying where you are.
Also, just wanted to say that SmartassV2 will save more battery when the screen is off, as compared to basic Smartass.
As far as your issue at 1.4, that bites! Mine tops out at 1.7 without any voltage adjustment. Most people should be able to get 1.6-1.7 as well. The best chips should get 1.8... That said, 1.3 seems pretty low for you to top out with. In any case, it's usually a good idea to go at least 1 step below where you don't freeze or reboot, just to be safe... In your case, that would be 1.2 - just putting it out there. In my case, even though 1.7 works, I have it set to 1.5 just to make sure I'm not running into problems.
Features at a Glace Video
The kernel included is enhanced with:
-Linux v3.4.99 compiled with Linaro GCC 4.9 2014.07 (courtesy Christopher83)
Download:
Install at your own risk
ROM Here md5sum: 8d231f18e4878a205424b9f3b0fbf21e
GApps :: PA works well or Slims works ONLY with dalvik (credit TripFX)
Mahdi Theme
Installation instructions
Installing Mahdi-Rom for the first time, or coming from another ROM:
- Make sure you're running a properly working ClockworkMod-Recovery/Team Win Recovery Project
- Copy GApps and ROM ZIP to your SDCard
- Boot into Recovery
- Flash Mahdi-Rom zip from SDCard
- Reboot system
- Boot back into Recovery
- Flash GApps zip from SDCard
- Reboot system
- Don't restore system data using Titanium Backup!
Upgrading from an earlier version:
- Copy the ROM ZIP to your SDCard
- Boot into Recovery
- Flash the ROM zip from SDCard
- Reboot
Also thanks to:
Google
Cyanogenmod
Slim ROM
Omni ROM
ChameleonOS
ParanoidAndroid
showp1984
Stratosk
faux123
A special thanks to:
Mahdi786 for providing source and layout. Please thank or donate accordingly.
Moose0704 who maintains the Nexus 5 thread
dsmitty166 for helping build this amazing ROM when needed
Manelscout4life
arco68, jocala
det0xx, TripFX, skyrmion
Source:
GITHUB: here
Changes:
Detailed: here Short: here
Reserve
Reserved
I think this may be the rom that will hit over the 3k barrier. at the moment hitting constant 29XX mark in quadrant even with first 3D test staying on avg between 40-60FPS, 38-44FPS 2nd 3D and 23-25FPS on last 3D.
My Setup
Gapps: Banks Min 4.4 7/29/14 build
Runtime: Art
CPU Freq: 1.4Ghz 1.2mV
Govener: Ondemand
I/O Sch: SiO
Additional Tweaks
Malive Booster v2.0
Flashable Seeder by ryu found in seeder op
Hyper Cola v1.6
Once again , Thanks @jfbs for another treat.
To others who are curious, this rom is stacked feature wise, responsive and impressive
Flashed this earlier today and I agree with @det0xx, this ROM has some great customization features and is very responsive!
I've only noticed a few bugs here and there (long pressing location tile doesn't navigate to location menu, needed to re-check and then un-check to disable flip tile effect, unable to remove torch tile), but nothing major. Overall, this is one impressive ROM! Great job @jfbs!
One bug I have is the lockscreen wallpaper disappears and stays black. Did a fresh install, not a major issue, just wanted to report it. Thanks for the rom, really nice.
Sent from my SGH-T679 using XDA Free mobile app
Dvarl said:
One bug I have is the lockscreen wallpaper disappears and stays black. Did a fresh install, not a major issue, just wanted to report it. Thanks for the rom, really nice.
Sent from my SGH-T679 using XDA Free mobile app
Click to expand...
Click to collapse
odd i haven't got that issue or at least not yet. Mind giving more feedback as to
Gapps used/using: List all the ones you have tried only that has this issue. CM, PA, Banks, and/or etc. vers such as 4.4.2 -.4 and build date.
Theme: default or 3rd party if 3rd party link or name of theme
Wallpaper: used gallery or 3rd party app to set it.
Runtime: Art or dalvik
Gapps: banks standard 4.4.4 7-24 build, standard theme. Wallpaper set through gallery, dalvik runtime. The problem seems to come and go. I'm not really concerned with it as at the moment I'm using this device as a media player. If nobody else is having the issue maybe I messed something up when adjusting my settings. When I have the chance I will see if I can sort it out.
Sent from my SGH-T679 using XDA Free mobile app
Dvarl said:
Gapps: banks standard 4.4.4 7-24 build, standard theme. Wallpaper set through gallery, dalvik runtime. The problem seems to come and go. I'm not really concerned with it as at the moment I'm using this device as a media player. If nobody else is having the issue maybe I messed something up when adjusting my settings. When I have the chance I will see if I can sort it out.
Sent from my SGH-T679 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for the delayed reply been tweaking to hit a constant and stable 3k benchmark. at 2950-98 atm for constant and stable. i've hit 3k just recently however phone becomes unstable. if your phone can handle 1.5ghz oc without problems then the 3k is already possible but battery life i'd assume would drop quite a bit. i've also hit unstable 3k using 1.4ghz and tweaking some settings but haven't messed with it much yet. anyways as far as your issue. yeah it has me stumped without physically seeing everything. If your not worried about and at least to my knowledge no one else is having the same issue. let us know if you do figure out what it is that is causing it.
I got my issue resolved. I'm not sure what caused it, but I fixed it by re-flashing the rom.
Sent from my SGH-T679 using XDA Free mobile app
Dvarl said:
I got my issue resolved. I'm not sure what caused it, but I fixed it by re-flashing the rom.
Sent from my SGH-T679 using XDA Free mobile app
Click to expand...
Click to collapse
prolly just flashed without wiping davlik and not 1 zip at a time per a reboot.
I used this ROM on my s4, it is a really nice ROM. Think I will pull out the exhibit and give it a try.
Well this rom is awesome.
And I finally figured out what I did wrong when trying jfbs's roms. It turns out I was not always loading just one zip at a time, and not leaving it alone long enough after booting the rom.
This time I left it be but with the settings screen on and CPU overlay enabled in developer options so I could tell when it finally stopped thrashing the IO subsystem in the phone (over 90% usage in the overlay, showed blue for a good 20 minutes).
So far so good! Been running it now for a day and no major issues.
Though one niggling thing is no way to adjust the hard buttons back light. I prefer to have it always on with the screen instead of timing out after 5 seconds.
Sent from my SGH-T679 using XDA Free mobile app
helppppp
do i have to flash this ROM with twrp v2.6.3.0 or can i flash it with the latest one?
Andresakapaco04 said:
do i have to flash this ROM with twrp v2.6.3.0 or can i flash it with the latest one?
Click to expand...
Click to collapse
i believe either but i would prefer and recommend the latest TWRP
det0xx said:
i believe either but i would prefer and recommend the latest TWRP
Click to expand...
Click to collapse
correct about either and i 2nd that motion for latest twrp.
TripFX said:
correct about either and i 2nd that motion for latest twrp.
Click to expand...
Click to collapse
thanks well i dint flash with the latest one it worked ...would it make any difference in the ROM speed ..and one more question do i have to flash a kernel to optimize my battery or should i leave Rom as it s... im just trying to make this phone work as best as possbile ???? thanks bye the way
Andresakapaco04 said:
thanks well i dint flash with the latest one it worked ...would it make any difference in the ROM speed ..and one more question do i have to flash a kernel to optimize my battery or should i leave Rom as it s... im just trying to make this phone work as best as possbile ???? thanks bye the way
Click to expand...
Click to collapse
nahh, but if you have issues later on than just flash using updated version. And no the stock kernal is fine
Andresakapaco04 said:
thanks well i dint flash with the latest one it worked ...would it make any difference in the ROM speed ..and one more question do i have to flash a kernel to optimize my battery or should i leave Rom as it s... im just trying to make this phone work as best as possbile ???? thanks bye the way
Click to expand...
Click to collapse
if you really want to get the most follow my oc guide in general op. Note battery life decreases past stock voltage. however higher frequency does not. i would also recommend waiting til you try the phone for a little bit before overclocking. however if you want better battery life and lower cpu temps now without sacrificing performance you can always undervolt the cpu for stock frequency. Stock if i remember correctly is 1ghz at 1.2mV i know almost if not everyone using the galaxy w (which is where most of our stuff comes from) can run 1ghz at 1.1mV as far as i know all our exhibits can as well. I could be wrong but at least from others and my own experience 1.1mV works flawlessly for 1ghz. as far as flashing a kernel to do it with jfbs roms you dont need to flash anything with cars1198's roms you do. Also i would not recommend starting at 1.1mV as a starting point.
EDIT: @jfbs so been running this rom for some time now and i can honestly say this beats AOIP by a long shot now. rock solid, still constant 29xx .8%hr sleep, 24%hr (max 4hr15mins) at stress test usage oc'd at 1.4ghz @ 1.2mV. No rom/kernel sided bugs encountered.