Database Develop

overclocking to 787mhz

l'M running buufed 2.1 and overclock widget let me overclock to 787 i lt worked just fine linpacks will be up soon
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

Interested to see your scores. I get 4.89 mflopishish on darch with linpack.

chococrazy said:
l'M running buufed 2.1 and overclock widget let me overclock to 787 i lt worked just fine linpacks will be up soon
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Its the same scores you will get on 768mhz.. I just got 5.45 mflops using froyo 2.2 and i hold the record of 5.535 mflops for htc hero both gsm/cdma (i got that using darchdroid, with different kernel)

hmm my cpu seems to have crapped out.. i had it running forlike 30 seconds and it locked up. it was running fine when i first installed buufed
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

although i am now fetting slightly better scores. 5.29
Sent from my HERO200 using the XDA mobile application powered by Tapatalk

edit again: i found linpack and got 3.281 is that good?

Redneck101 said:
i just scored 5550ms at 787 edit: what program are you guys using?
Click to expand...
Click to collapse
lol its called "linpack"... not the benchmarkpi or similar

i know, i realized that and edited my post. i got 3.344 mflops time: 1.62 norm res: 3.36

got her up to 3.64 mflops now, i plugged in my charger cable.

I get about 3.3 with DC 2.09.01 @ 748 MHz.

Moved as not Android Development.

chococrazy said:
hmm my cpu seems to have crapped out.. i had it running forlike 30 seconds and it locked up. it was running fine when i first installed buufed
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
mine always did that too, it was weird. i always got excited when it would oc to that level and then it would freeze up seconds later

[Q] Overclocking the Galaxy

Now that the kernel source is available, won't we be able to overclock our mobiles?
Guess i got a little bit envious with all the overclocking that has being going on with other phones.
Sent from my GT-I9000 using XDA App

A bit of using search never really hurt anyone before...

So is it possible yet.
Sent from my GT-I9000 using XDA App

Been possible for last 3months. Just find a kernel with oc support and get setcpu. Frankly its not worth it as setcpu is a piece of **** app that make your system unstable. As other poster said. Do a damn search
Sent from my GT-I9000 using Tapatalk

ickyboo said:
Been possible for last 3months. Just find a kernel with oc support and get setcpu. Frankly its not worth it as setcpu is a piece of **** app that make your system unstable. As other poster said. Do a damn search
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
But for froyo? Maybe is asking for it.

maybe someone with the tallents could have a look into this OC method they use for droid x and milestone using a kernel module, this would enable us to overclock any froyo kernel.
http://androidforums.com/droid-2-al...d-2-overclock-kernel-module-instructions.html

It would be nice to have it in the kernel. 100 to 1200 that the system controlling like it already do. No setcpu crap.
Sent from GT-I9000 Jpm OS kernel with z4mod

ickyboo said:
Been possible for last 3months. Just find a kernel with oc support and get setcpu. Frankly its not worth it as setcpu is a piece of **** app that make your system unstable. As other poster said. Do a damn search
Yes for froyo and don't be so damn rude Muppet.
Click to expand...
Click to collapse

also setcpu is not to blame for the problems, as it runs just well on galaxy i7500 for overclocking. i´m not sure what the problem wit it is on SGS, but i´m pretty its not setcpu´s fault

FadeFx said:
also setcpu is not to blame for the problems, as it runs just well on galaxy i7500 for overclocking. i´m not sure what the problem wit it is on SGS, but i´m pretty its not setcpu´s fault
Click to expand...
Click to collapse
The problem is that SGS doesn't like different CPU governors! It will only work if you don't touch the governor settings! At least that is what I have found to work in the Eclair builds!

FadeFx said:
also setcpu is not to blame for the problems, as it runs just well on galaxy i7500 for overclocking. i´m not sure what the problem wit it is on SGS, but i´m pretty its not setcpu´s fault
Click to expand...
Click to collapse
Seems ignorance is bliss for some of our fellow xda folks. SetCPU is not even needed for those oc kernels unless you want to change scaling from default schema. It really don't contribute to the unstablity, just that the kernels seemed inefficient.
Sent from my GT-I9000 using XDA App

OrionBG said:
The problem is that SGS doesn't like different CPU governors! It will only work if you don't touch the governor settings! At least that is what I have found to work in the Eclair builds!
Click to expand...
Click to collapse
I agree. Don't install SetCPU and the kernel is reasonably stable, but crashes miserably when running cup intensive apps. We have to work harder developing a kernel which works well for our hardware.
Sent from my GT-I9000 using XDA App

Prankey said:
I agree. Don't install SetCPU and the kernel is reasonably stable, but crashes miserably when running cup intensive apps. We have to work harder developing a kernel which works well for our hardware.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
kernel was very much stable. It is just that hummingbird is bad for overclocking. Not all phones can be overclocked, sadly.

dupel said:
kernel was very much stable. It is just that hummingbird is bad for overclocking. Not all phones can be overclocked, sadly.
Click to expand...
Click to collapse
I can understand what you are suggesting, however why was it still unstable when I tried to disable 1.2GHz or 1.13GHz frequency keeping the original scaling and running at 1GHz or less??

Is that 0.2 bump really noticeable?
Sent from my GT-I9000 using XDA App

carlocb said:
Is that 0.2 bump really noticeable?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I think 20% is noticable difference. Especially when using that crap of a browser we have.

Prankey said:
I can understand what you are suggesting, however why was it still unstable when I tried to disable 1.2GHz or 1.13GHz frequency keeping the original scaling and running at 1GHz or less??
Click to expand...
Click to collapse
dont know which version you used.
1.13 was quite old. All recent versions were 1.2. Anyway, nevermind =)

Yeah, do want a OC'able kernel - the 1.2GHz kernels for Éclair were always stable enough for me if I didn't try to UV it.

Id be open to using a 1.2Ghz OC if its 100% stable and no wake-up bugs and ofcourse should not affect the life of my CPU that much and should not drain my battery more than 10% faster

[kernel] Dragon Kernel v5.0 TEST4 (Frost Compatible)

DO NOT USE ON NON-2.2.1 ROMS. This is for Frost and possibly other 2.2.1 based ROMs. It will break regular Froyo based releases.
I'll try to keep this updated with the regular version. The only changes will be to fix the internal SD mounting in Frost. See the regular Dragon Kernel thread for the changelog. No point in putting it in both places.
TEST4 - http://goo.gl/FrEa7

Does this work on bionix v 1.3?
Sent from my SGH-T959 using XDA App

duboi97 said:
Does this work on bionix v 1.3?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Damn it dude, do you know how to read, this is for 2.2.1 rom.
Please read!!! GRRrrrr

duboi97 said:
Does this work on bionix v 1.3?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Turn off the news and read.....
Sent from my SGH-T959 using XDA App

Thanks ttabbal. A lot of users have been asking for it. Ill update the Frost OP tomorrow.
Sent from my SGH-T959V using XDA App

OC is having no effect on my phone. Set cpu or voltage control. Linpack scores staying the same...
Sent from my SGH-T959V using Tapatalk

Never mind, got out sorted out. Everything works great now. Thanks for the frost kernel, so quickly.
Sent from my SGH-T959V using Tapatalk

hanbaoquan15 said:
Damn it dude, do you know how to read, this is for 2.2.1 rom.
Please read!!! GRRrrrr
Click to expand...
Click to collapse
Actually this is a kernel
running Trigger 2.6.1
/dead horse kernel
/honeycomb theme.

dietdrpeper said:
OC is having no effect on my phone. Set cpu or voltage control. Linpack scores staying the same...
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
Voltage control Is just to under volt the voltage and save battery and to stop the phone from overheating.
Try quadrant. You will see the difference.
running Trigger 2.6.1
/dead horse kernel
/honeycomb theme.

Had this kernel since last night. Running great!

Set CPU / Voltage Question
eunkipark92 said:
Voltage control Is just to under volt the voltage and save battery and to stop the phone from overheating.
Try quadrant. You will see the difference.
running Trigger 2.6.1
/dead horse kernel
/honeycomb theme.
Click to expand...
Click to collapse
So then I can use set cpu along with voltage control? I prefer using set cpu becuz of the profiles and the UI.

ttabbal said:
DO NOT USE ON NON-2.2.1 ROMS. This is for Frost and possibly other 2.2.1 based ROMs. It will break regular Froyo based releases.
Click to expand...
Click to collapse
Confirmed works on Darky's 9.3 beta3 (i9000 rom based on 2.2.1) as mentioned by Monther Qandeel. Even the nexus s boot screen display properly w/o flickering

Zio Overclocking Question

Well iv had my Zio for a few months now and even with the 2.2 Update sometimes it seems to slow down and stutter.
I have been doing some research on Rooting my phone to get wifi tethering and the ability overclock my phone for better performance.
Now so far the Zio community on here seems to be very small so i dont expect an answer very fast so here is my question.
Has anyone with a Zio Managed to root there phone and overclock it? im not talking about some CRAZY overclock. im thinking in the 50-100MHz range. if so how has the performance increased? or has the performance Decreased? how is the battery life?

I have attempted such by manually editing some CPU files. I was able to successfully adjust the governor and changed from the stock 95% to 100% CPU threashold.
Sent from my Zio using XDA Premium App

So far I would say its a little faster. I definitely see a difference when opening apps and especially with the 2.3 launcher from the market.
Sent from my Zio using XDA Premium App

Mattix724 said:
I have attempted such by manually editing some CPU files. I was able to successfully adjust the governor and changed from the stock 95% to 100% CPU threashold.
Sent from my Zio using XDA Premium App
Click to expand...
Click to collapse
Could you list where the CPU files are located m8?
Sent from my Zio using XDA App

If your phone is rooted you can use a number of overclock apps, but they use parameters based on te phone the zip is 122.88 to 600 mhz
Sent from my Zio using XDA App

Spz0 said:
Could you list where the CPU files are located m8?
Sent from my Zio using XDA App
Click to expand...
Click to collapse
CPU files are located within the /sys/devices/system/cpu/cpu0/cpufreq/ directory
Sent from my Zio using XDA Premium App

@matrix
What were your exact editing lines? I forgot which thread it was where you answered this question before.

I basically changed the governor to performance and threashold too 100. Actually overclocking the ZIO is giving me trouble when I try to go higher than 600000
Sent from my Zio using XDA Premium App

Correction. Governor must be set to on demand to edit the threashold.
Sent from my Zio using XDA Premium App

You wont be able to get true over clocking until theres been kernel source released. Has that happened yet? New to this device.
If so, and someone is willing to do something with adb, I can work on getting an overclock kernel for you guys, but I wont be able to test it myself so it could be a bit dangerous.

As long as it isn't clocked any faster than 6.5 or 7... 7 would be risky.
Sent from my Zio using XDA Premium App

You cannot over clock the Zio at the moment. The Kernel does not support it. You can use an app to set it to 600mhz all the time. It usually stays at 600mhz on its on.

hightech316 said:
You cannot over clock the Zio at the moment. The Kernel does not support it. You can use an app to set it to 600mhz all the time. It usually stays at 600mhz on its on.
Click to expand...
Click to collapse
which is why I said if we had kernel source, I would work on it for you guys. Keep an eye out for it.
Once we ave source, if one of you can pull your current config for me, which i'll explain once its available, it shouldn't be too hard to clock up a little.

option94 said:
if we had kernel source,
Click to expand...
Click to collapse
Ive been looking, If you come across it will you post? vice versa

hightech316 said:
Ive been looking, If you come across it will you post? vice versa
Click to expand...
Click to collapse
Of course. Wouldn't let that go by unnoticed.

There is a overclock widget available that works great. When screen is locked it downclocks to what ever you set it too. Once unlocked it goes to 600 MHz.
Sent from my Zio using XDA App

z3r0t0l0rEnCe said:
There is a overclock widget available that works great. When screen is locked it downclocks to what ever you set it too. Once unlocked it goes to 600 MHz.
Sent from my Zio using XDA App
Click to expand...
Click to collapse
but im gonna try and bump that 600 number up a little bit. Just need source code.

Tried to overclock witb droid. Fixed some permissions with clockwork it opened and ran just like setcpu. The app said the overclock module couldn't be opened because my device wasn't listed. Obviously.
Kyo M6000 Rooted with NoAds or Bloatware.

yeah the module is gonna be device specific.

I can't wait to see what this phone can do overclocked!
I had the Droid Incredible, iPhone 3G and neither could play the videos that I encoded for the ZIO without stuttering. The ZIO is playing the video files without stuttering with default player!
MP4/H.264/AVC/AAC LC
Video
800x480/4:3/29.97/1536
Audio
48100/2/160
I was just testing these settings on full movies just to see how bad the ZIO would stutter, to my surprise it played those as if it wanted more!
I will not keep those settings, as a full movie is over 1.5GB!
I might keep the video settings and use different audio settings, because the quality of the videos kick major butt!
I will be the beta tester for your Overclocking kernel option94!
I think it would do 750Mhz no problems, which would make this phone a beast! I wonder what the video sub system is in this unit?

Over Clock on Glitch Kernel

Can someone tell me how to over clock with v14 B6 just where to set things at?
Sent from my SGH-I897 using XDA

There is an app called "pimp my cpu" (I believe it's in the market) that will allow you to easily overclock the Glitch kernel. Might want to give that whirl.

jmtheiss said:
There is an app called "pimp my cpu" (I believe it's in the market) that will allow you to easily overclock the Glitch kernel. Might want to give that whirl.
Click to expand...
Click to collapse
I got it but the interface is confusing I kinda wanna one click thing lol
Sent from my SGH-I897 using XDA

I don't have it on my phone right now, but I believe all you have to do is open the app, pick a maximum cpu frequency (e.g. 1400 MHz) and long-click on it. It will pop up "set as max", and when you click that, it will put that as your max speed until you reboot.
If you want to go farther than that, you can create profiles that will load on startup, and tweak the undervoltage settings, but for a simple overclocking, you're actually in a good place with PMC.

The best one for glitch kernel is the nstools
Sent from my SGH-I897 using xda premium

You're supposed to use NStools for glitch. I can't really tell you what's best for your phone though
Sent from my CM9 ICS i897 Captivate

glitch kernel POST 1 tells you what to use. if you didnt read that, i dont expect that you searched and read the MANY guides on xda on how to overclock. so im not going to tell you.,

TRusselo said:
glitch kernel POST 1 tells you what to use. if you didnt read that, i dont expect that you searched and read the MANY guides on xda on how to overclock. so im not going to tell you.,
Click to expand...
Click to collapse
I got NStools as soon as I flashed the rom , just want more directions to do it, don't think I didn't read or look around, I'm not new to flashing but I'm new to overclocking, just wanted clarified directions on what to click in nstools, to lets say over clock to 1.2 ghz
Sent from my SGH-I897 using XDA

There is a over clocking guide in post 1 of the glitch thread also.
Sent from my SGH-I897 using xda premium

Wdustin1 said:
There is a over clocking guide in post 1 of the glitch thread also.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Yes, it specifically addresses live OC. A simple google search on overclocking will help too
Sent from my CM9 ICS i897 Captivate