Bluetooth Audio output - Thunderbolt Themes and Apps

Does anyone know of a reliable Bluetooth Audio App? i tried (what seems to be the only one on the market) Bluetooth Audio widget app and it does the trick... it transfers all the sound like music, gps directions and phone call to my jawbone. The application itself crashes all the time and the widget it self is non responsive sometimes and you have to remove it and add it again.

I'm not sure what you mean. I have a stereo bluetooth headset for running and such and all I do is enable bluetooth on my phone and turn on the headset (it was one I got on new egg by motorola and will take calls as well). Anyways it automatically transfers audio after that to the headset only. I assume this is the way out normally is for any headset.

Related

Bluetooth Dropout after call when playing music

I am trying to get ALL audio to my BlueAnt Interphone unit. Calls work fine on their own, with no extra audio enabled. Audio will come through OK until I either receive and finish a call or use Voice Command, then it goes to the phone speaker. I have tried using BTMusic, BlueMusic and BTAudio and they are all good at putting audio to the headset but only BlueMusic returns the audio after the call, the others drop out after any other activity. Strangely BlueMusic will return the audio to the headset after a call, but it doesnt allow the call audio through to the headset, it can only be heard on the phone speaker. Searching the forum doesnt seem to show this problem, although several are close they dont provide a solution, though they did provide the info regarding the software choices. I have set the Bluetooth settings with Kaiser Tweak.
Currently running the HTC WM6.0.
Any thoughts or suggestions?
Cheers

Help using bluetooth headset with xperia x1

Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.

[Q] App to disable speaker when BT or headset in use?

I'm trying to find an app, widget, or whatever that will completely disable the speaker on my T-Mobile G2 if a headset or BT is active.
Currently, ringtones and notifications come through the headset AND the speaker at the same time, only media comes through just the headset. If a headset is plugged in or BT enabled, I think that the speaker should be OFF. (WinMo has always done this. -- I just discovered this "feature" about Android while trying to adjust some ringtones while on an airplane with my headset plugged in - very embarrassing...)
Any and all suggestions would be welcome.
I've looked at several volume control apps, but few seem to support this feature. I tried Advanced Audio Manager that does have profiles for headphone and BT, but they either don't work on my G2 or just disable ringtones completely.

[Q] Stream ALL audio through bluetooth headset

I recently purchased a Sony bluetooth PS3 headset which also pairs fine with my Note. Calls are working great but the headset doesn't support the streaming of any other sounds apparently.
There're a few apps (BTMono and Mono Bluetooth Router for example) that are supposed to 'fix' this issue but they don't work on my Note. I'm using Slimrom 4.2.2 build 8. I don't get any error messages from the apps, they seem to activate correctly but no audio is being played through the headset.
Does anyone have an idea on how to fix this? I would just like to hear my gps navigation through my bluetooth because I have a very loud car and can't hear the nav when my phone is mounted on my dashboard.
Thanks in advance.
I've had a similar issue with a bluetooth headset at work - I imagine fixing this would involve diverting TTS/Music/whatever audio stream to the phone call audio stream. I've tried looking at Tasker, and frustratingly you can tell it to play a single file over the call stream, but can't set a perminant "divert notifications to call" or similar setting. Not as far as i can see.

Is it possible to re-route sound output of AA to phone-car BT audio connection?

This is my setup:
Aftermarket head unit (IDCORE) connected through AUX to car stereo. AA is connected wireless (S10+, stock) with head unit; there is also car BT connected to mobile; when driving TWO active BT connections: 1, phone - car BT for audio and 2, IDCORE for AA).
And this is my problem:
AUX output (head unit -> car stereo) works, but has a quite annoying (static?) noise. Ground loop isolator is set, everything I can do hardware-wise is done -but the quality of AUX sound is MUCH LESS than it is when using BT phone-car connection (makes sense, Meridian built in system, with fiber optic).
Question:
considering above and that there IS an active phone-car BT audio connection during driving (beside the necessary AA-IDCORE connection) is there a way (software, app, switch?) to route AA sound through the phone-car BT audio connection, instead of the (noisy!) AUX wire?
Rooting of the phone is not an attractive option (due to my company account on the phone) - but I would be interested in any solution; as noise on the AUX output is quite disturbing. Thanks in advance
Have you checked the Bluetooth settings and checked music audio for the connection to the head unit?
Just did it. I CAN route music audio (in my case TuneIn) to BT in the settings of the phone (sounds, separate app sounds setting), but 1, this does not work (no sound over car BT from TuneIn, when using it on AA), 2, this setting can only be set for ONE application at the time (and I also use navigation, news service on AA), 3, the Android Auto app (the one I need?) does not show up in the application list of this setting. Still stuck.
My idea was (but I don't know if it is possible) a nifty app, that FORCES all sound (music, nav, news, etc) from the phone to BT (car), even when using AA.
I've got the same problem, using AA over USB and can't get Viper working because it doesn't stream over Bluetooth.
I have the same request. I have an AA unit attached to an original BMW X5 nav system. I can switch between them by long pressing the MENU button. The problem is that the AA unit can output sound only via audio jack and my car's system has fiber optics. The quality is very poor when compared. Is there anyway in which I can force my Android phone to output AA sound through car's BT? The AA unit has an option to do this for phone calls but unfortunatly not for regular sound (Spotify etc).
Anyone heard of anything related to this? I noticed that in the iPhones there is a setting in the accessibility options to route the audio through bluetooth. But there is nothing similar in AA. I can't believe this feature is not requested more.
Has anyone solved it? I'm struggling with the same thing.
I just ended up buying a BT transmitter which connects to my device's jack audio out and in turn it connects to the car's bt. It is stupid that there is no software solution to such a simple problem. Why can it do it for audio calls but not for music!? Why the iPhone can do it but the all configurable God of a mobile OSes simply can't?
Also, another idiotic thing of AA is that it doesn't allow you to switch the call to speaker or another bt device... in fact nothing happens when I get a call on the actual phone when connected to stupid AA. This is sooooo idiotic. Way to go android...
Aawireless also has a fewture that solves this also
Really? Where? What is it's name? Where do I access this?!
Aawireless: that is a piece of hardware again, isn't it (https://www.aawireless.io/)?
I look for an app/ software to solve this issue, if possible..
Aaahh I thought the reference was to Android Auto Wireless not a 3rd party hardware thing.

Categories

Resources