[Q] Sleep button sticky/non-responsive - Captivate Q&A, Help & Troubleshooting

The physical power button on my Samsung Captivate seems further suck into my phone than normal. When I press it, i hear a click but either nothing happens or my phone brings up the menu for holding the power button.
I am 95% sure this is not a software issue because i flashed back to stock using Odin and the problem remained.
Is there a hardware solution to this that is better than tweezers (which have so far been not successful) or is there even a software solution where i could re-macro my keys?

You could probably can get a replacement from samsung

I have a similar issue. My power button also sits further down in the phone than usual and is sometimes non-responsive. It mostly works but does tend to bring up the shutdown menu sometimes instead of putting the phone to sleep. I'm going to take it to the att store Monday and see about getting it replaced under warranty.
Sent from my SAMSUNG-SGH-I897 using XDA App

Related

Nexus One Power Button Solutions?!

Has anyone figured out a solution for the faulty power button? It is killing me i can't wake my phone sometimes and now that i have Froyo i get no blue light notification so my reply to peoples text messages are VERY slow.
DaUub said:
Has anyone figured out a solution for the faulty power button? It is killing me i can't wake my phone sometimes and now that i have Froyo i get no blue light notification so my reply to peoples text messages are VERY slow.
Click to expand...
Click to collapse
Modaco-Paul is working on Trackball Wake! http://twitter.com/PaulOBrien/status/14543157295
You should still have light notifications in 2.2. Is yours not working?
I only get White notifications and it doesnt blink as fast and work sometimes
Has anyone worked out exactly why these power buttons are dying? Mine's dead as a doornail too
this is pretty funny to me cuz mine was not working in the morning anyways i THINK it has to do with some dust collecting on it (like the trackball) i blew on it a lil and it started working again also i read somewhere else about a wire that has a 90 degree angle so you might try pushing the power button forward then down
This is certainly the most annoying issue on Nexus one...
I use a combination of "no lock" and "lock 2.0" to enable trackball wake and turning off via home screen. And when I need to reboot I use the "plug-remove battery-replace battery" trick...
If someone has better solutions, we'll be glad to hear them, since it seems that this problem will eventually hit all Nexus one users.
I use fancy widget - In the clock settings, I selected application when clock pressed (lock enabler app). This solves the locking problem without pressing the power.
Use the usual trackball wake as the unlocker.
elio said:
This is certainly the most annoying issue on Nexus one...
I use a combination of "no lock" and "lock 2.0" to enable trackball wake and turning off via home screen. And when I need to reboot I use the "plug-remove battery-replace battery" trick...
If someone has better solutions, we'll be glad to hear them, since it seems that this problem will eventually hit all Nexus one users.
Click to expand...
Click to collapse
My situation is:
My Nexus is with non funcioning power on switch.
What is the solution to power on phone after i need to switch battery or Sim Card,
Thank You.
I have the same problem.Is it hardware or software issue?
I used the call Google and get a warranty replacement trick
Seriously, just call and get it replaced under warranty, that's the only real fix. They are aware of the problem. My phone is rooted, I didn't mention that, and they didn't have a problem with it, and I got my replacement within a few days.
Now that they've stopped selling them, it may not be as easy, but worth a try.
This is a serious issue for people outside countries that sell the nexus one.
I live in brazil and I hope this problem doesn't appear to me because it's cheaper to try to fix it than travel to usa.
Sent from my Nexus One using XDA App
As mentioned above, for people outside the US, replacement of the device is not an easy task; and even for those who get a replacement, the problem will eventually recur, since it seems obvious now that this is a hardware issue.
As for how to reboot the device: plug it to the charger (usb or main), wait for the orange led to turn on, remove the battery, as soon as the led will turn off replace the battery and the phone will boot.
I've had two bad power buttons, they were a hardware issue replaced under warranty.
Does anyone have any experience of getting a replacement from HTC in Singapore for this power button failure issue?
I bought my phone in the Google Online Store on my last vacations in US, I live in Mexico and call to HTC for the warranty but theres no solution outside US.
I use compressed air in the power button and works a little without the battery cover.
Sent from my Nexus One using XDA App
I had exactly the same problem. then i read about it in the nexus one forum and some folks mentioned, that deinstalling the app "advanced task killer" solved their problem. i tried it and now my power button is back to normal and working like a charme!
there is a program in the market to get it to wake from the trackball but I can't remember the name. I had the same problem and had to send it back to HTC and they fixed it for free. They told me there has numerous problems with the wake/power button.
Are ALL N1 fated to have the power button break? I just bought a Nexus One and i wan't to know if i should return it whilst i still can.
Some background info:
http://www.androidguys.com/2010/09/...yscom+(AndroidGuys)&utm_content=Google+Reader
Sent from my Nexus One using XDA App
Put me in the broken power button club. After going through a few months of the power button acting up, well it finally quit working. The good news is I still have 3 weeks remaining on my 1 year warranty, the bad news is the N1 has an unlocked bootloader. I called HTC last night and they emailed me an overnight shipping label. I chose the repair option instead of replacement. I did not discuss the unlocked bootloader with them. Since this is a hardware issue I can't see why they would deny the repair.
BTW, that is a great link on how to get the phone to turn on, I kept trying all last night to get it to come on by pressing the power button. If they deny the repair I will have them send it back and try one of the alternatives to turning the phone on and off.
I am currently using the Evil desire rom, should I flash back to a stock rom before sending it back.
Thanks.

[Q] Nexus One CM7 power button problem

I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.

[Solved] Hardware issue with power button

Build date 1007 - in service August 2010.
I've been running Pinnacle 1.2 (been on it since v1.0).
Just moments ago I've found the power button to be unresponsive. This happened after I rebooted into recovery, sticking me there for a while.
I was stuck in a recovery loop- pull batt, reinstall batt, automatic boot back into recovery.
Somewhere in the process of trying different combinations of battery pulls with cable installs and volume up/down holds (trying for download mode) I ended up finally launching the ROM, but w/o a power button all I can do is pull the battery, and the moment I do, the phone automatically wakes w/o even touching the power button (which is totally new to me).
Any input would certainly be appreciated.
My first order of business is to flash to stock (JF6, bootloaders and all if all else failed) but being that it automatically boots when the battery is installed I don't think even a jig would help...or is the beer steering me wrong?
I am confused. You can go back to stock or no?
I cannot get into download mode. The only way to power the phone off is via battery pull.
I cant flash anything from recovery because it says the power button is disabled (it is).
As I put the battery back in the phone boots immediately...I mean the at&t screen lights up my palm before I put the cover on or even flip the phone over.
Use an app from market to enter download mode? system toolbox free is one
Used Odin to go back to stock KF1 and still no power button. Now System Toolbox won't work w/o root/busybox. lol
Once my phone falls asleep I can't wake it back up.
It may seem obvious that the power button is physically broken but I don't know why the phone boots up as soon as the battery is installed...that was never the case before this issue came up.
watsa? Anyone?
Can anyone else shed some light on what would make the phone boot when the battery is inserted (happened at the same time the power button became unresponsive), essentially denying me the opportunity to get to download mode.
beyond this point I am consfused myself. I initially blamed Pinnacle and thought going back to stock might fix it which obviosly didn't happen.. It seems like your power button is always "pushed" so as soon as you pop your battery in phone reboots..
watsa said:
beyond this point I am consfused myself. I initially blamed Pinnacle and thought going back to stock might fix it which obviosly didn't happen.. It seems like your power button is always "pushed" so as soon as you pop your battery in phone reboots..
Click to expand...
Click to collapse
On a second thought if it was the case then power button should have messed up functioning of your phone even after powering on. So I am consfused more. Need a hardware expert here
I'm preparing myself to deal with my beloved phone finally letting me down after all the success we've had...it's just really bad timing as I'm currently unemployed, broke and only 13ish months into a 48 month contract.
Ok, so after a physical tear down it seems to be in the external plastic of the button itself?
After removing the outer case and reinserting the battery I noticed it did not automatically boot up. I pressed the actual power switch/button that is connected to the board and the phone then powered up. I let it finish booting and held the power button down and the power options menu popped up. I clicked Power Off and it shut down fine.
This means it certainly isn't Pinnacle ROM (never thought it was, personally), or software related at all. Now to figure out what is going on between the plastic external power button and the power switch on the board.
Edit: Nothing was there? I blew out the dust reassembled the phone and now it works fine. Weird.

Samsung Captivate Power Button Not Working . FIXED :)

If your phone's power button is in a 'pressed' state, like mine, (turns on automatically when battery is inserted), it is a hardware issue.
Here is a hassle free alternative to turn on the phone when it is in sleep mode, without relying on the power key!! Takes a minute or two only!!
1. Get 'Go launcher' from the app market (play)
2. Get 'Go Locker'
3. Now Enable Go Locker on your device. And you are done!!
When the screen goes black again, Just press the volume button, The screen wakes up!!
Using this method you don't lose the normal functionality of the volume rocker!!
I recalled that I used to have Go Locker on my phone, and that when I pressed the Volume key the screen turned on!!
At that time I found it a little annoying, But now it has turned out to be such a gift!!
* For this method to work, your phone has to be rooted.
The power button is not going to work until the hardware is repaired, I prefer to use this method, because it is a safe and quick method!!
Believe me I looked around the internet and this forum for a fix, The usual method: editing the system files on the phone, and after which the volume button cannot be used to control the volume.
For those looking for a quick fix, just follow my method!
Cheers!
There are also several roms out there that have the volume rocker wake built into the rom without making it completely useless for it intended purpose. As well as several that offer a go to sleep toggle in the notification window so you can lock your phone again.
so this is a hardware issue ? i had been using the go locker i been using but the power button is annoying cus it keep showing the power button options . and killing my battery.
only fix is samsung?
Pretty much every version of cm for cappy has volume rocker wake as an option, because of this common problem. I use app called turn off screen as well.
Natureboyhcg said:
so this is a hardware issue? only fix is samsung?
Click to expand...
Click to collapse
I had the exact same problem with my Epic Touch 4G. Thought it was the ROM, the overclock, etc. I flashed back to (almost) stock, went back to original clock speeds. I couldn't figure out what it the world was causing the issue, until it got worse. Then, I noticed that even brushing past the power button would wake the screen, and about 10 seconds later the phone would reboot.
Long story short, I bought a replacement power switch, soldered it in place, and have had zero problems since!
Several eBay sellers offer the proper replacement switch you'll need.
(They don't include the required skills to properly desolder/solder it, however. It's a tiny switch - about 4mm x 2mm x 1.5mm, and you'll need a good quality fine-tipped soldering iron.)

[Q] Power button is not locking/turning off screen but works to bring up power menu.

So this morning I picked up my Note 4, used it normally to check emails, etc, went to turn off/lock screen and it wouldn't respond at all. I held down the power button and then it brings up the power menu, I restarted a few times and still nothing. Is my power button defective or could some setting have automatically changed the settings?
Go to *#0*# and select Sub-Key. Press every physical button on the Note 4 one by one (Volume Up, Volume Down, Home Button, Power Button On, Power Button Off). If the end result is PASS, then you're Power button is fine. Can also be a sticky / tacky power button, or something you modded in the settings.
artkrime said:
So this morning I picked up my Note 4, used it normally to check emails, etc, went to turn off/lock screen and it wouldn't respond at all. I held down the power button and then it brings up the power menu, I restarted a few times and still nothing. Is my power button defective or could some setting have automatically changed the settings?
Click to expand...
Click to collapse
arjun90 said:
Go to *#0*# and select Sub-Key. Press every physical button on the Note 4 one by one (Volume Up, Volume Down, Home Button, Power Button On, Power Button Off). If the end result is PASS, then you're Power button is fine. Can also be a sticky / tacky power button, or something you modded in the settings.
Click to expand...
Click to collapse
Just did the test, every button turned a different color, volume up (gray) volume down (green), menu (brown), home (blue) back (purple) , power (red, is this a fail?) but I didnt get any PASS. Is the power button supposed to have 2 colors, one for on and one for off? I tried holding down the power button but that brings up the power menu.
Also noticed that the screen will not dim or turn off automatically.
Update: I ended up doing a reinstall of the stock fw through Odin and it fixed it. I wonder what caused it and where those settings/issue where stored? I had tried doing a reset from within settings, but as I understand, that doesn't clear ALL the data.
I know how it feels when the diagnostic doesn't yield a pass. Glad to hear that reflashing the stock firmware resolved it though. Could have been something deep in the firmware causing this. Keep us updated if it persists again. The power button has been a culprit of problems in the past for many as well in previous Note devices. The final result should have displayed "PASS" on the display, perhaps you didn't complete the task, that's okay. Sometimes simply clearing the cache instead of factory reset could have resolved the problem as well. Samsung is notorious time to time.
artkrime said:
Just did the test, every button turned a different color, volume up (gray) volume down (green), menu (brown), home (blue) back (purple) , power (red, is this a fail?) but I didnt get any PASS. Is the power button supposed to have 2 colors, one for on and one for off? I tried holding down the power button but that brings up the power menu.
Also noticed that the screen will not dim or turn off automatically.
Update: I ended up doing a reinstall of the stock fw through Odin and it fixed it. I wonder what caused it and where those settings/issue where stored? I had tried doing a reset from within settings, but as I understand, that doesn't clear ALL the data.
Click to expand...
Click to collapse
I have a Note 4 too and since a few days I have been noticing this issue. The power button doesn't wake the screen up. I have to fiddle around the button a little bit, press it a bit harder sometimes and then it works.
Also noticed that when this happens, I unlock the phone using the Home button and when I try to use the power button then nothing happens. Keeping the power button pressed doesn't give me the reboot/boot options either until I fiddle with it.
The strange this is, one it starts working, i can use it again and again until I leave the phone aside until sometime and then the power button does nothing until i repeat fiddling it.
---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------
Also ran the test : *#0*# and select Sub-Key
All buttons work except the power button but again if I press hard and try to nudge the button a little bit, I saw the colour change to RED. No PASS either.
Do you have any xposed modules installed? I had this happen with either gravitybox or wanam when I tried to tinker with the power menus. *3.
No. Everything is stock and not rooted either.
In my case, a complete wipe to factory fixed the issue for me and never had the issue since then, but it kind of sounds like you may have a hardware issue.
that's what I'm thinking too hw issue. But once it starts to work it works perfectly even pressing the button lightly. If the phone's been idle for a while that's when it starts. But anyway, I'll do the basics, factory reset and then bring it over to the carrier shop. Hate to send it away as its not that long ago i got the phone.
Thanks for all the help/comments.
I just started having the same problem myself. I think I'm going good to buy the right now. For the power button and have it installed.
corpuscallosum said:
that's what I'm thinking too hw issue. But once it starts to work it works perfectly even pressing the button lightly. If the phone's been idle for a while that's when it starts. But anyway, I'll do the basics, factory reset and then bring it over to the carrier shop. Hate to send it away as its not that long ago i got the phone.
Thanks for all the help/comments.
Click to expand...
Click to collapse
I am having the exact same problem , did you manage to solve it ?
No. But I've been using the phone less as in on holidays and noticed it hadn't been happening much. If issue still persists I'll bring the phone back to the carrier for a repair/replacement as it's still under warranty.
For the first few days power button worked occasionally now it has stopped working completely.
Sent from my SM-N9100 using xda Forums PRO
kabuk1 said:
Do you have any xposed modules installed? I had this happen with either gravitybox or wanam when I tried to tinker with the power menus. *3.
Click to expand...
Click to collapse
I have had wanam installed but I uninstalled it , also the phone failed the *0# test
Sent from my SM-N9100 using xda Forums PRO
The working of button changes with temperature. With a little heating with hair dryer the button started working.
Sent from my SM-N9100 using xda Forums PRO
I agree with the temperature because when I was in holidays the issue didn't happen and Iwas in a hot country with 35 deg C. Weird, so was my Note 4 built for Middle East?!?
My power button has started working 100% normal from falling the hw test earlier.
Sent from my SM-T320
I did a full factory reset and it appeared to work but after restoring all my apps and using it for a couple of days it started again. Brought it to the carrier to get it fixed as is still under warranty. They said it was a faulty "electrical component" which they replaced. Got the phone back and I restored all the apps. I have the problem again. I don't trust the carrier to have fixed the issue as it was intermitten in the first place. The button works continuously once it's stays working until I leave it aside for a while. I'll have to bring it back again and wait for a week!
I'll keep you posted.
^ blow some hot air with a hair dryer
My note 4 problem is whenever I remove the charger it went out and behave as it wants to start up and as soon as I replaced the charger I can turn it on and it stays on. Someone please help me with this

Categories

Resources