Rooted with manual nooter and everything worked fine. Then tried dalingrins overclock kernal and it wouldnt go past the N boot screen. Did the factory restore with zip file through Clockwork. Still wont boot passed N screen. I have tried holding power and N button and it wont reset. Tried the 8x failed boot and that wouldnt work either. What other options do I have?
You are not truly "bricked" till it won't boot from an sd card... Have you tried that yet?
Sent from my HTC Desire HD using XDA App
stevenjf88 said:
Rooted with manual nooter and everything worked fine. Then tried dalingrins overclock kernal and it wouldnt go past the N boot screen. Did the factory restore with zip file through Clockwork. Still wont boot passed N screen. I have tried holding power and N button and it wont reset. Tried the 8x failed boot and that wouldnt work either. What other options do I have?
Click to expand...
Click to collapse
Remove Clockworkmod, then do the 8x reboot. If it doesn't work, that means you're not doing it correctly. Just keep trying.
Have you tried wiping and reflashing from a bootable sd?
Sent from my phone using Tapatalk
stevenjf88 said:
Rooted with manual nooter and everything worked fine. Then tried dalingrins overclock kernal and it wouldnt go past the N boot screen. Did the factory restore with zip file through Clockwork. Still wont boot passed N screen. I have tried holding power and N button and it wont reset. Tried the 8x failed boot and that wouldnt work either. What other options do I have?
Click to expand...
Click to collapse
Did you get it from here?
http://forum.xda-developers.com/showthread.php?t=1064095#13485473
Because there are other OC kernels which were designed for CM7 mods.....
To boot from SD, how can I do that if I remove Clockwork? Should I remove clockwork, flash the stock IMG on an sd and do a 8x boot?
If you are unable to get to your emmc clockwork recovery you need to make a clockwork recovery bootable SD card. It will boot your nook into CWR from the card. Instructions can be found in the development thread. Its not that hard. You just have to burn the image to a spare SD card.
Once you have that, you can flash whatever you like. If a backup of your prior 1.2 is not readily available you can try flashing an older version first (see "return to stock" thread in development) and then updating to 1.2 using the B&N official update. At least this is how I went about a fresh install several months ago just to clean house. You can proceed to manual nooter again.
OC kernels as mentioned before are specific to which build you are running ie froyo, CM7, stock etc. The link above are just stock 1.2 kernels modified to allow for overclocking and few other tweaks such as a different scheduler. Dal has overclock kernels available for 1.2 as well. That's what I use when running 1.2. Just make sure you grab the latest one that is specific for your setup. Hope this helps.
Edit: Here is the restore to stock thread link: http://forum.xda-developers.com/showthread.php?t=914690
Two steps before flashing the stock zip is to format data and cache. It has an error when formatting data. I think this is why the stock flash didnt work the first time. Any suggestions?
What version of CWR are you booting to from the SD card? I have heard of this problem when trying to use older versions that don't have the proper extension support.
Figured out the issue. I did a factory reset by holding the power and home button down. Then I went into clockwork and installed the 1.0.1 recovery. I took out the sd and rebooted. That didnt work....
So I did teh factory reset again, installed 1.0.1 recovery, then Instead of removing the sd, I formatted it and rebooted. This worked perfect. For some reason it wouldnt boot without an SD in the slot. Even though it was formatted through CW.
Thanks for all yor help guys!
I would always get the error message on the first reboot after using a bootable SD card. I bet if you had just rebooted again without the card in place it would have fired right up. Glad you got it working!
When you get your rooted 1.2 setup again, make a nandroid backup and save a copy of the folder to your computer/jump drive or something. That way if you get bootlooped/borked again you can load that nandroid onto your bootable SD card and restore. Won't have to start all over again
Actually have one more issue. I'm trying to do the barnes and noble 1.2 update. Both of my computers recognize a drive but say to insert a disk when trying to drag the update file to them. If I go to device info on the nook it says I have 0.00mb of internal storage. I assume these two problems go together. Any ideas?
I believe both SD card and internal memory technically should be recognized. Unmount the SD card and remove it. It may be causing issues or interfering. Reconnect the device and it should mount the internal storage partition (5 GB). You can drop the update onto the root of this drive. This of course is assuming you don't have one of the newer nooks that has different size partitions (1 GB). Not sure how your restore process may have affected this.
Related
Is there a way to get rid of the clockwork mod boot on the nook color
As per onstuctions on this site, I got a 1.1 pre roote version and installed it
from the sd card with the clockwork menu which informed me that the
"NookColor" install complete.
when I reboot, it starts with the welcome message,but then only reboots into the same recovery menu.
At this point I would just like to go back to a stock rom, but cannot boot anything but the recovery.
By the way, I can boot froyo from the sd card
Please help me
I've moved your thread to the correct forum.
So you dont have the CWR sdcard in? Because if you did, you would need to remove that first. Sorry if this dumb, but thats all I can think of right now. Maybe reflash the 1.1 pre rooted rom? Or follow the instructions in Samuelhalff's "Easily restore to stock" thread located here in the Nook forums.
The "Easily restore to stock" saved the day. I am now up and running.
Thanks
How did you do that? I have CWR on mine and I went to buy a book from the shop on the Nook and it downloaded and installed 1.1... Now when I try to go back and restore from backup CWR doesn't respond... All it does is sit there and if I select something from the menu it goes to the background image (the circle with the top hat) and sits there. I would like to remove this so I can reroot my Nook...
Thanks for any help.
Bob
See the other thread or sticky that's labeled "How to Restore to Stock easiliy." I believe you can also use the power down and on 8 times trick to restore to stock as well.
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
porear said:
Same thing happened to me. I used Clockwork to flash the CWR-removal.zip on the restore thread mentioned above and it fixed my boot, everything else was OK.
Click to expand...
Click to collapse
Ditto that. I reinstalled CW and everything seems to be working fine. Has anyone else had issues with using Rom Manager on the NC? I've had to go back to stock twice whenever I've used it.
I had a problem when trying to roll my 1.1 rooted NC back to stock because I futzed it up that I ended up in a CWR loop. 8 resets didn't get me a reflash, it got a recovery. Took me finally getting the NC flashed and rerooted at 1.1 a second time when I reinstalled ROM Manager and ended up with the problem again. Took me this wasted effort to realize that CWR runs in lieu of the reflash if CWR is installed and that's an obvious problem when I wanted a reflash and not restore a different backup.
There is a thread with a zip that CWR can run that blasts CWR off and reflashs stock and getting that done put me back both times I messed up above.
Seems to me that perhaps the whole "can never brick" response when people ask for help needs to have an addendum about how CWR gets in the way of an 8 reboot reflash and provide guidance on how to get that update file and use it instead to get back to square one. (Plus some advice on when to clear caches and data partitions to avoid weirdness later).
Now rerooted on 1.1 with no ROM Manager running but I'm missing the nandroid bacjup capability, so maybe I reinstall but stay away from the recovery option until I need it?
I reinstalled CW after I rerooted 1.1 and have had no problems with it so far, but I also haven't tried to backup or anything since the first time (which initially got me into this mess).
I do think you're right about having some sort of addendum thrown in. I was running circles around the XDA forums for a few hours trying to find some sort of fix the first time my Nook started acting weird. The 8-reboot trick just wouldn't work, and my battery was more or less drained because CW was interfering. Maybe this is just understood by most, but it certainly would have saved me some time (and some gray hairs) if someone had mentioned it earlier.
So what is the conclusion of this thread? I have a new NC, updated to 1.1 and installed AutoNooker 3.0, immediately installed Clockwork and did a NAND backup... bad thing is that it won't boot off the eMMC anymore, only CW.
I can boot roms off of the SD card (ie Honeycomb) but this isn't want I want. I've downloaded and flashed several roms but its looped at CW. So the rom isn't the problem.
If we can't install Clockwork Recovery, then how can we flash new roms to the eMMC?
[UPDATE]
Found a flashable file which removes Clockwork Recovery.
http://www.etoile-laconnex.com/CWR-removal-rootsafe.zip
After I flashed that I am now booting off the eMMC froyo rom. Nice! Saved me from Restoring it, updating it, and reRooting it.
[UPDATE 2]
Well while it worked initially, it loaded the homescreen and reset. Now it is stuck at the "Touch the Future of Reading" screen with no Recovery... which worse off. Now I have to make a CWM bootable SD, flash the restore, and start over. Nice.
[UPDATE 3]
Finally got it back to stock after hours. I found a "MonsterPack" here:
http://forum.xda-developers.com/showthread.php?t=922870
Even this was more complicated then it needed. I had to download the 128mb RootPack image, and get it going so I can grab the needed root files. Then download the right size Clockwork image for my memory card and get it going. The end result ended in a Clockwork SD card. Then I made a "sdcard" folder from where I added the rootpack files and the stock image 1.0.1 flashable zip file.
Format the system and boot partitions, then flash the stock zip.
I just upgraded stock to 1.1, then will proceed to boot off the microsd and root, install GAPPS, etc.
I wish I knew of a great custom rom to flash. I flashed Nookie Froyo 0.6.8 and it powers down immediately (several complaints about this). Maybe CM7?
Ditto
I'm having this problem as well, but I can't seem to do anything to fix it. I was running 1.1, and auto-nootered using v3.0. Everything was hunky dory until I installed CWR. I flashed, shutdown, restarted, then chose to perform a backup which brought me down into CWR and I was never able to get out. I used the Monster pack zip to remove CWR, and now I boot to the "n" screen and sit forever. I tried the 8 hard resets and it said it installed on two different occasions, but still I sit on the "n" screen during boot. I tried the 1.0.1 restore zip as well, but to no avail. What do I need to do to get back up and running?
CW Recovery only
So I flashed my NC with both the pre-dualboot and the dual-honeycomb rom, but every time I reboot with the SD card inserted, it only boots to CW recovery. When I take it out..it boots to NC stock OS.
Am I suppose to remove clockwork recovery with the CW-removal zip? I tried that.. once it rebooted it went right back to CW. Should I be using two different SD cards? One for CW recovery and one to load the eMMc?
So confused...
What I need to know is what should be on the SD card after everything is flashed.
Mw : you could use a bootable cwr sdcard and flash 'emmc recovery repair', then format data and restore your backup.
Ehamonn: you have to remove cwr from the sdcard. Format should do the trick. But you'll loose the data on it..
Sent from my Desire HD using XDA App
Do I need to keep a boot image on the card after I format?
Well, if you only want to boot from internal memory, no.
My nook color isn't necessarily bricked.... I have phiremod v2 installed on it and for the last 3 days have been trying to uninstall/flash another ROM so i can go back to phiremod v1 or try another ROM. However, I absolutely can not get my nook to boot into clockwork recovery. I've tried every size of the CWM download ranging from 128mb-8gb (my card). I've tried monster's rootpack and everything. When i burn it with winimage, it makes the bootable SD card like usual when i flash roms, but my nook doesn't recognize it and just boots up like normal into phiremod. I've tried EXT4 versions of the CWM and still nothing happens. It just boots normally every time. If anyone knows what to do i would be forever grateful........Thanks in advance for any help, i'd be glad to return the favor somehow.
an addendum to my previous post - my nook is now bricked. i tried rebooting it and once it was off, it will now no longer turn back on. of course i can't use a bootable SD card because they no longer work in my nook
just waiting,and when it released EXT4 internal CWM,
Try a Complete format of the SD card and then Flash a Virgin Nookie Froyo rom on it. Also remember that Windows only sees the first partition of the MicroSD so doing a Normal format will only Wipe the First partition. I reccomend the GParted Live CD if you don't have Linux to make sure you completly format the card to FAT. If you can get that working browse the Topics in the Dev forum and Find the one on Reflashing Virgin Stock. If you can't get Stock reflashed then you're sortof screwed because you can't just send it in to B&N in the condition it's in.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
I have the same problem but I am using phiremod v4, I have flashed CWR using Rom manager and nothing, it just keeps booting into phiremod. I tired using a bot-able CWR sd card that worked in the past. The problem actually started while I was in CWR and it basically crashed on me and booted into phiremod, I now cant for the life of me get back into CWR...
In the end you have no choice but to flash back to virgin stock. I reccomend making a Nookie Froyo card to mount the emmc and recover what you can and then follow one of the guides in the Dev forum to completely wipe and restore virgin Stock.
Doing anything else at this point just decreases the amount of possible data recovery.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
I was trying to backup my autonootered 3.0 stock, I flashed cwm using the rom manager method, rebooted. Now I can't get out of cwm, it keeps booting to it after a full power down and power on. Also, my SD card won't mount so it won't read whats on it. Any help/suggestions please?
Here's how to Remove CWM and Flash back to Clean Stock:
http://forum.xda-developers.com/showthread.php?t=914690
____________________________________________________
Sent from Nookie Froyo using Tapatalk
imaninja23 said:
My nook color isn't necessarily bricked.... I have phiremod v2 installed on it and for the last 3 days have been trying to uninstall/flash another ROM so i can go back to phiremod v1 or try another ROM. However, I absolutely can not get my nook to boot into clockwork recovery. I've tried every size of the CWM download ranging from 128mb-8gb (my card). I've tried monster's rootpack and everything. When i burn it with winimage, it makes the bootable SD card like usual when i flash roms, but my nook doesn't recognize it and just boots up like normal into phiremod. I've tried EXT4 versions of the CWM and still nothing happens. It just boots normally every time. If anyone knows what to do i would be forever grateful........Thanks in advance for any help, i'd be glad to return the favor somehow.
Click to expand...
Click to collapse
Are you POSITIVE that the partition on the bootable sd extends ALL the way to the zerobit? If you have consistently flashed sds of bootable .imgs, and none work, check that first, next I would assume that you need to push RecoveryFix.zip from other thread.
Ir you don't mind time-travel back 7 years....
japzone said:
In the end you have no choice but to flash back to virgin stock. I reccomend making a Nookie Froyo card to mount the emmc and recover what you can and then follow one of the guides in the Dev forum to completely wipe and restore virgin Stock.
Doing anything else at this point just decreases the amount of possible data recovery.
____________________________________________________
Sent from Nookie Froyo using Tapatalk
Click to expand...
Click to collapse
I downloaded stock firmware from our site here and placed the zip in my SD card. Cyanogen logo comes up and when I look at everything, it seems that Phiremod is still in play. I even removed all (?) Phiremod and Clockwork Recovery files / folders fom the SD Card. Should I be starting with a fresh SD card and / or removing the card, doing some factory reset and then reinserting the card with the stock firmware?
I attempted to put Phiremod onto my NC, but I formatted the boot partition so it doesn't start up. What's the easiest way to get my Nook going again?
Try using a CWR SD Card, and either flashing a nightly zip, or one of the U-Boot files floating around.
I think I just need to flash a proper boot file, which should I try for either CM7 or Phiremod?
Can anyone help me out? The sticky seems a bit outdated or maybe it's just confusing me.
I have a 2GB uSD card and I just want to try out Phiremod and the stable CM7 to see which I prefer. Do I have really have to restore to stock just to overwrite it again?
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Follow sticky carefully, it works.
Sent from my NookColor using Tapatalk
thereddog said:
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Click to expand...
Click to collapse
Do the 8 re-boot step. There is also a boot fix zip file or recovery zip file you can flash via your CWM SD.
I flashed the 3.2.0.8 recovery zip, but it still doesn't boot
Download this to your CWM sd card. And this. Then put in your CWM sd card, boot it up, flash the update_nc_stock_1.2.zip file, then ManualNooter. Take out the sd card and reboot. Should have stock + root.
Thank you, but I don't even want to use the B&N software. Either CM7 or Phiremod.
Can't I just repair the boot partition?
I went ahead and flashed the update-nc-stock-1.2-signed.zip then manual nooter
Took the card out and rebooted, nothing happens
Did you reboot? What do you see?
Nothing, screen doesn't come on
Help please!
Oh. Have your tried flashing this?
Where did you find that on the CM site? All I found under Nook Color were the 'update' zips
Downloading now
Ahh, it's a nightly CM7 build... I assume that it will completely format the EMMC?
Downloaded and flashed the latest nightly zip, still won't boot.........
Anyone else have any ideas I could try?
Perhaps I missed where you said you did it, but go back and take the Nook completely back to stock. I umderstand that you said you don't want to use to stock software at all, but you need to get it back to factory so you can at least boot the device.
Once you've done that, go ahead and follow the directions TO THE LETTER to load your CM7 or Phiremod.
Cliffs Notes: Trying to repair something when you can't even boot is a bit silly. Just start from square one and root. Enjoy!
I got a used nook that had CM7 on it. Seeing that there were issues a week ago with the 1.3 root, I put 1.2 on it and rooted it. Now 1.3 is successfully rooted and all seems a go ... so I want it.
But how the heck do I get a rooted 1.2 Nook to get the update?
It's been on wifi with the B&N Shop and/or Home open for three days, nothing. I followed the steps on B&N's site to try to sideload the update. Nothing. I don't see a CWM flashable version out yet. Frustrating.
I could also factory reset back to 1.2 and try to let it load the 1.3 update - I assume that the MN still works with a stock 1.3 as well.
nloding said:
I followed the steps on B&N's site to try to sideload the update. Nothing.
I could also factory reset back to 1.2 and try to let it load the 1.3 update - I assume that the MN still works with a stock 1.3 as well.
Click to expand...
Click to collapse
Sideloading BN1.3 works for me. Describing EXACTLY how you sideload the update. The update needs to be copied to emmc.
I followed the instructions on B&N's site. I put the nookcolor_1_3_update.zip file and put it right on the root of the emmc (at least, the highest up directory the USB interface would let me place it on).
Having CWM on your internal recovery blocks the update. You can flash this file to get back to 100% stock (internal CWM or CWM card, doesn't matter):
update-nc-stock-1.2-signed.zip
Format /system and /data before you flash it. If you have apps and settings you want to restore after you update and root, make a backup first (you should anyway) and once you have CWM back, Advanced Restore /data only.
CWM is not installed on the emmc. I use bootable sdcard with CWM burned on it to do my flashing. I doubt this is the issue but if MN will work on a stock 1.3 install, it's easy enough to do.
I had also encountered a problem, but had worked around it.
It turned out that I had at one point flashed CWM to my emmc even though I was using an SD card to boot.
The update was failing each time, but I eventually noticed that it was going into clockwork during the restart and the install would fail.
I'd completely nuked the Nook (deleted boot, system, etc) while in CWM and restored a Nook 1.1 image I had.
This allowed me to then install the 1.3 update and have it reboot into the BN recovery instead of the CWM recovery.
Note, if you format boot, system and so on, you'll render the Nook unbootable without an SD card, so be sure to have the image ready to restore BEFORE you reboot it.
I ended up doing a factory reset and putting the nookcolor_1_3_update.zip on the root of the emmc. It updated immediately, but I of course lost my data. Oh well.
MN didn't really work, I fought with it over and over again, but finally got it working. I'm posted in the MN thread about it.
My Nook Color is stuck at the grey 'n' screen. I rooted it at version 1.2, then decided I wanted to try to use it with Froyo. It booted up fine, then I got the flashable zip and ran that from a CWR sd card. Now it will not boot (stuck at ANDROID_). I've tried to restore it from CWR with the Nook-complete-restore-1.0.1.zip, that didnt work. I tryed using the images from <http://forum.xda-developers.com/showthread.php?t=919353>. Same issue. I do have access to adb from the booted sd card on CWR or Froyo. My main goal here is to just get it to boot into the normal, unrooted state it came in and work from there.
Thanks in advance guys
Are you using the latest version of CWR (3.2.0.1)?
Follow the instructions here: http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
I think I was using 3.0.0.6 for some reason I'll give that a try and get back
YOU CANNOT BRICK THIS b*tch!!!
eliteinferno said:
My Nook Color is stuck at the grey 'n' screen. I rooted it at version 1.2, then decided I wanted to try to use it with Froyo. It booted up fine, then I got the flashable zip and ran that from a CWR sd card. Now it will not boot (stuck at ANDROID_). I've tried to restore it from CWR with the Nook-complete-restore-1.0.1.zip, that didnt work. I tryed using the images from <http://forum.xda-developers.com/showthread.php?t=919353>. Same issue. I do have access to adb from the booted sd card on CWR or Froyo. My main goal here is to just get it to boot into the normal, unrooted state it came in and work from there.
Thanks in advance guys
Click to expand...
Click to collapse
I've tried and tried to brick this SOB - cannot be done. Slip in a boot disk and voila it's back. Amazing this beast it is!
Make a boot disk M8.
patruns, you are awesome!! Thanks brah