Database Develop

my screen are not functioning!!!

i am not able to use my screen anymore and then i continue to ;
1) clear storage with keyboard support of 1,2,3,4
2) succeeded to restore
3) the problem now is stuck at the beginning of setup, but i cannot do anything becoz the screen not able to use anymore!!
plz help, what i'm goin to do now is download 1 of the rom and try to reflash see how.
any other method someone plz advise
million thank
joei

cant even install the HARDSPL http://forum.xda-developers.com/showthread.php?t=334679
sob sob....someone plz help

Touch screen not functioning or no picture due to screen itself not functioning? Anything specific happen that might have caused this? Still under warranty?

the touch screen not functioning at all. i didnt do anything thing before that.it just happen all i did to clear the storage and try to flash with some other roms but not successful.
no more warranty.
thanks for ur reply Guilf. or any other method that i can flash the roms? since i not even able to do anything. but i still can able to go into the bootloader. anything roms that works on the bootloader ?
i still not able to install the HARDSPL and SUPERCID

I've never heard of a ROM negatively impacting the touchscreen - so I'd be somewhat surprised if it fixed it. However, anything is worth the effort.
FYI - you don't need to SuperCID. Just HardSPL. Or try to JumpSPL it. Check for the thread on White Screen Issue during HardSPL in Upgrading section.
If it's still not under warranty and needs to be fixed - PPCTechs replaces the LCD and touchscreen in one unit. $160, I believe. Good luck.

thanks for ur reply, i even try to open up everything and ensure all the cabling is attached propoerly. still not work!
i cant even go into the windows screen i cant do the jumpspl either.
and the PPCTechs is broken link.
sigh...................

found out some scratches on the cable, could it be the reason that my screen not functioning anymore? pplllzzzzzzzz someone advise thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

HELP! about to throw my FUZE out the window!

installed the advanced config, htc flow editor, MS comact .net framework. selected the performance upgrades 1,2,3,4.....
now my phone keeps freeszing up a lot when I am swithing between the contacts, text, email , settings tab.....please help as it's so annoyiing and half the time I have to do a dsoft reset....
I thought this was a problem with my first FUZE, so returned it got a new one and same thing happens on the new one....now once in a while the phone just goes black screen on me and have to remove the battery and put it back and turn it on....the soft reset or just trying top tuurn the phone doesn't help either....
I would appricieate any tips, guidance here....

anyone?

yellowducati996 said:
anyone?
Click to expand...
Click to collapse
Atleast try one of the cooked ROMs first, its a common fact that the stock ROMs are pretty poor.

I am new here...would you please guide me to the ROM which works best on the FUZE along with details instructions...never done this before and want ti make sure I don't end up screwing it up thanks for your help!

Did it freez up before you did all the tweaks and performance stuff? maybe some of them are conflicting with each other. Backup all your data and do a hard reset and do all you tweaks with a little time inbetween so you know what one starts giving you problems. Better yet try a custome rom they have all the tweaking done for you basicaly

which one is the latest and greatest ROM that I can use...link please ...

I suggest Kickstart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

FIX
My Fuse Runs Runs Very Fast You need to Get off the Att Bloatware Rom And Flash a Touch pro Rom And make Sure You have Done are the Right Speed ups And Tweeks Also Change your File System Cache Size to 8MB And your System Filter to Cache 131072 and Glyph Cache to 128

[Q] wanna make sure I do everything right

Okay, so I just typed for 20 minutes on this reply and then accidentally closed the tab before posting. ;_; So let's try this again. It's probably going to be a bit shorter this time around, 'cause I don't wanna spend another 20 minutes, but mkay
I'm pretty new to all this, and while I think I have a decent idea of what to do, I want to make sure I'm going to be doing everything right the first time around
I was planning on doing the following:
1) install the 3 button combo fix
2) install clockworkmod recovery
3) install speedmod
4) install a custom rom
Now I have some questions regarding all this Probably very newbish questions, but alas, here goes:
1) clockworkmod=clockworkmod recovery right? same thing?
2) if I installed clockworkmod, could I still use Odin if wanted to?
3) radio, rom & kernel are 3 different things, ive been told by a friend with a HTC Hero. but I only see custom versions of ROM and Kernel for the SGS. Does that mean it's different for SGS users? how I should see this?
4) with clockworkmod I could put a backup stock rom into place to flash to in case I ever have to send my phone back, right?
5) custom roms dont include custom kernels right? since when I read custom rom threads they sometimes list kernels, as if they're included or something. confuses me. they're 2 entirely different things to install, right?
I think that's about it. Am I missing anything? I mean, is there anything I could/should do as well?
Hope you guys can help me
Greets

Thread title is supposed to be "[Q] wanna make sure I do everything right" not "[Q] wanna make sure I do everything"
anyone out there able to correct this for me? thanks in advance

zKsPOWERHOUSE said:
Thread title is supposed to be "[Q] wanna make sure I do everything right" not "[Q] wanna make sure I do everything"
anyone out there able to correct this for me? thanks in advance
Click to expand...
Click to collapse
done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

AllGamer said:
done
Click to expand...
Click to collapse
thanks!
oh and bump

[Q] problems when trying to make a recovery image/backup current rom on CWM.

ok, i have searched and have seen 1 other thread like this with the same problem, but its in the Facinate forum, so i dont know if what was aid on there applys to the Galaxy s. but basically, when i go to back up my current rom, it comes up with a message like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what was said in the fascinate forum is that i need to flash CWM with odin for it to work properly. is this correct? and if so, how do i go about it?
thanks and sorry for being a dumbass if this is stupidly obvious.
Oliver
P.S im using hardcore's speedmod k12h 500hz kernal if that makes any difference to anything.
EDIT, this problem is now sorted....

bump, can anyone shed some light?

Install CWM first as per instructions in http://forum.xda-developers.com/showthread.php?t=734166

I was doing it with Rom manager before, sorry i forgot to say, i have tried the process which is mentioned on the thread you suggested and have just tried it again, still no joy and its coming up with that screen in the first post. Could it be something to do with the kernal i am using?
Oliver

Bump!!!! please, anybody got any ideas... would flashing a new kernal be of any help?

so i havemade a backup using nandroid, seen as it wasnt working through rom manager. i just need to know what files should be within it for it to have backed up my rom... or should i just trust that it should be there.

Hi, if i was you i would download titanium backup, the free version is all you need, then you can create a full backup of all your system data and apps and even app data so ur settings dont change... it will take about 5 - 10 mins. then when you have flashed a new rom or what ever it is your doing, just re-apply titanium backup and let that do all the work..

yeah, i understand that. but i mean to be able to restore my stock rom if i need to? because im preeeeety sure that titanium dosent do that? (if this sounds sarcistic it isnt meant to be)

well there is an option to back everything up into a ROM but ive never used it so i dont know, besides if your changing to a new ROM and you dont like it, just download and flash back to your current ROM it only takes two ticks via clockworkMod.

but clockwork mod isnt letting me do it (make a recovery image), if you see the top of thread...

yes but you dont need a recovery image, you can flash back to your current firmware if you dont like the new one. all the system apps ect are built in to the ROM, so all you need to back up is your apps and things, which titanium backup can do

ok, i am officially confused, as i dont see how i can do that without a recovery image to reflash...

noob: problems when rooting

hey guys today i got a vodafone locked samsung galaxay s . I wanted to unlock it so i read a guide on how to root it , i followed this guide using odin3 . I put the phone into download mode and ran odin3 , i followed everything the guide said and started odin3 but odin stops on zImage , I left it for an hour and nothing changed . Now the phone shows the symbol below when i try to turn it on . I can get the phone back into download mode im just wondering if anyone knows a way to get this phone rooted ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cheers

i suffered that alot when i was new to rooting and flashing, just try flashing a new stock firmware back to the phone from samfirmwares.com and see how you go,
actualy pre rooted firmware
firmware http://www.multiupload.com/YY0JBMUWBF
csc file http://www.multiupload.com/NRVCK6KYWD
512 pit file http://www.multiupload.com/I5WICSBFJ1
see how you go with that, although u may need to manually add youre providers apn settings in after though

Regarding the icon: flash the bootloaders(boot & Sbl) and a working kernel

Thanks for the posts ...fliptechnologies do i use odin to flash them files ? where does the firmware go ?(pda?). Does anyone know if anyone with the same problem has made a guide by any chance ?
thanks

there are apps which help you root your phone using adb
like SuperOneClick you might want to try it, or using a firmware with root as suggested
there is also an app which can be installed in your phone to root ( http://forum.xda-developers.com/showthread.php?t=833953)
but first you need to get a firmware in order to install that app
get an stock ROM like 2.2 froyo or 2.1 eclair, then try with the app