Related
Hi guys... I have a few questions for you about my Hero. Forgive me for not yet having the same level of knowledge that many of you guys have. I am certain that I can contribute in some way, as well. My phone details:
Firmware version: 1.5
Baseband version: 1.04.01.09.21
Kernel version: 2.6.27-533ce29d
Build number: 1.56.651.2 CL5027
Software version: 1.56.651.2
Hardware version: 0002
1. I've read several stories where a number of phones were returned because they couldn't be updated when the new update was released. Is this an absolute fact, that it can't be updated, or is there an error in code somewhere that made it reject the update and there is a known workaround? The answer to this question obviously dictates my forward motion.
I have the typical problem apps, and am getting no joy from youtube. Presently, I'm surfing with good speeds, but market is non-existent.
I like having Sprint tv, when I'm having to sit and wait somewhere.
I have time today and tomorrow to get things ironed out, but will be extrmemly busy after that, like 20 hours a day studying. I'm hoping to get some direction that will give me complete functionality, but will require the least setup. I am quite computer savy, and repaired this phone, to this point, in a day or 2, without asking a single question of anyone. I traced down problems, and solved issues. Seen APN, and TCP errors (don't believe it completely, since I can authenticate on the web). Know that some issues are url problems, etc.
The following questions are based upon the answer to question number 1.
2. Can this phone be updated?
2a. If yes, What do you recommend... 2.1? What rom do you suggest, for full stock-like functionality? Will I lose Sprint tv? Pointers/direction? (pancake??, superhero??)
2b. If no, What rom do you suggest, for full stock-like functionality? Will I lose Sprint tv? Pointers/direction?
Before repairing the phone, I actually tried to update it from my computer, but it was rejected. I turned off my security software and tried again. I noticed that while using XP sp2, a windows program that was incorporated starting with sp2, DEP (data execution prevention) didn't like the actions that the update was taking, and arrested it very shortly after starting (yet the window cycled forever). I assume that many people wouldn't be this observative, and recognize that this was happening. It was halting an HTC file that utilized storage memory (similar to buffer overrun exploits - the reason DEP halted it), for temporary storage of the files to be used for the update. That file was as follows:
C:\Program Files\HTC\HTC Sync\Mobile Phone Monitor\FsyncServer.exe
And the way to prevent it from continuing to do so is:
1. Click Start
2. Select Control Panel
3. Select System
4. Click the Advanced tab
5. In the Performance region select Settings
6. Click the Data Execute tab in the dialog box that opens
7. Select Turn on DEP for all programs and services except for those I select
8. Click Add.
9. The open dialog box will open. Browse and select your application.
10. Click Open
11. Click Apply
12. Click Ok
I guess what I'm sort of suggesting, is that this might be why anyone ever had problems updating, with the exception that OTA also said there wasn't an update.
So, back to the original question. Is it true that some Heros can't be updated? I don't want to force something, and brick, if you know what I mean. I completed the setting that will allow it to go forward (listed above), but haven't tried to update since. I felt that I really needed to ask you guys first, before I made a mistake that I'd regret. Should I try again? Before I started working on the phone I did try OTA and it said there wasn't an update. Now I don't have that option anymore. After repairing the phone, I've lost updates. Am I stuck with 1.5? With my run of the mill phone desires (except that it be fully functional), should I keep 1.5?
I did see gmail 2.3 apk, but is that compatible with 1.5? This looks like is would solve the market issue, if I could use it.
I did read about gscript and addressing mms (although I'm sure that's very old news to you guys), but if in fact I can't update this phone, it might be one of my only alternatives. If that is my only choice, are their also additional scripts to address everything I need to fix (all the normal issues)?
Additionally, it seems that many apps register with the phone/user. So, when you are using a used phone, many apps are still registered as functional. Does flashing a new rom affect the OS and apps? Will I loose the already registered/functioning apps? With a complete upgrade, will I gain functionality of some key features, but lose all other previously enabled apps? In other words, will I gain update, and market, and lose sprint tv?
I have read a lot. With things the way they should be, I've not been able to quite determine what I need to do. With all this being said, How do I go forward and achieve a fully functioning phone? What is the best choice of path's to take for me?
Rooting? I have seen the one-click, and think I'd be correct in that I need something containing Sense UI. Forgive me for asking a stupid question... but the rom is only the menu accessibility, correct? Is there something straight out of the box setup, or do all roms contain configuration notes?
I'm satisfied with stock features, if they work, and adding other useful things like tethering. Since I'll be so busy, I'll have little time to do much else. But don't get me wrong. I have 10 PC's in my house, with only 2 people living here. I'd love to customize the crap out of it. It's just not going to happen any time soon, due to my brutal study schedule. So for now, I just want it to work like it should, on a B mvno.
Do I go north, south, east, or west????
Could someone chime in that can give me direction, based on everything I've stated. Your response is so graciously appreciated.
Cheers!
Umm well I'm not sure why you're having problems with any update, someone who's far more experienced can maybe tell you but as far as roms I think it depends on whether you like sense or wanna go froyo. Cyanogen mod 6.1 stable (2.2) is nice & highly customizable however there's also AOSP roms (2.2) that some people feel is quicker than cyanogen however they aren't as customizable as cyanogen, in addition there are tons of GREAT themes for both. Also we've had a ton of work on an odex AOSP gingerbread rom (2.3) not yet stable but works good for most & on that note a great themer also put together a themed AOSP gingerbread rom (2.3) that looks good & about stability I'm not so sure on but I would recommend those roms. Although with these roms YES you will lose sprint apps like TV & vvm etc. However people have posted these apks in the theme thread section to work on roms like cyanogen & AOSP. If you do like sense roms there's a couple that are still live in the development section like nfinite & nfx I believe. Hope some of that info helps
Thanks so much for your response. So Cyanogen mod 6.1 stable (2.2) is highly customizable... That's good.
So let me get this straight. I need to:
root (is one-click OS version specific? Can it be used on 1.5?)
backup
save to pc
update to 2.1 (if I can, and it needs to be the rootable version found here)
re-root
and flash Cyanogen
and setup
Is this correct?
inkblots said:
Thanks so much for your response. So Cyanogen mod 6.1 stable (2.2) is highly customizable... That's good.
So let me get this straight. I need to:
root (is one-click OS version specific? Can it be used on 1.5?)
backup
save to pc
update to 2.1 (if I can, and it needs to be the rootable version found here)
re-root
and flash Cyanogen
and setup
Is this correct?
Click to expand...
Click to collapse
Sort of. I can't remember which version I was at when I rooted but I remember I downgraded to do it. But if you go in the development section you will find a thread that shows & gives you what you need to root. So you should root. Then flash a recovery image such as clockwork mod or amon ra. When I rooted I used the recovery from the downloadable app (Rom manager) in the market & that one was clockdwork mod. It's worked great for me so I've been using it ever since. Then backup whatever you are running currently. Then flash whatever rom you want. I'm about to see if I can link you to a root thread then once you do so I can give you a dl link to cm 6.1 stable. Will you be able to root on 1.5?? I don't completely know...
Edit: Ok this is the way I rooted mine, hopefully this will work for you
http://theunlockr.com/2010/09/27/how-to-root-the-htc-hero-androot-method/
New MotoX from sprint.
android version 4.2.2
baseband msm8960pro_bp_2323.020.90.00r
kernel 3.4.42.-xline.
system version 139.14.1
build 13.9.0q2.x-116-mx-17-57-1
i did a fair amount of searching but could not find the proper instructions for obtaining root access for the moto x. Need root access or this device would be a deal breaker.
Can someone point me to a link? I would be much appreciated. Thanks Listers!!!
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
I did search the web and the forums; I'm sorry. it was a long day, i had just purchased the phone and wanted to make sure i didn't brick it. I have rooted/jailbroken several other devices but wanted to know if the latest ota update would cause a problem for that.
Again, I'm sorry for for the excess forum baggage.
I'll try again.
BrokenWall said:
You must of not even attempted to do any real looking. This forum is not that large for the Moto X and there is plenty of information for you to see.
1) you have a sprint phone so you can unlock the Bootloader, install TWRP, get root no matter the Android version
2) there is a clearly titled post in one of the subforums that will tell you how to get root
Click to expand...
Click to collapse
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
moises1204 said:
that simple? i have the tmobile version with an unlocked bootloader but i been looking for ways to root it and i have not been able to do it, so you saying that if i install TWRP that would obtain root automatically?
Click to expand...
Click to collapse
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
bullpen7979 said:
I read where a previous method of rooting (pwnmoto or whatever) was shut off by the latest ota.
Please help a new guy out.
http://forum.xda-developers.com/showthread.php?t=2487635
this thread is what I found. Please advise if this is the correct method. Thank you all, and sorry if I'm wanting to be sure I'm doing the right thing.
Thanks listers...I do very much appreciate any help.
Click to expand...
Click to collapse
ownmoto or whatever?? um... ok... I can tell you haven't browsed the different sections for the Moto X here or you would have seen in the "Moto X Original Android Development" section that its called "PwnMyMoto"
Brokenwall gave you a way to root your sprint device, no matter what stock rom you're running... OTA updates or not. Granted unlocking your bootloader voids your warranty... and he didn't give you a 100% newbie step by step guide which it now seems you were really looking for.
Also in the Moto X Original Android Development is a thread titiled... "[Root] RockMyMoto (Yes, even the first OTA)" which is pretty obvious as to what it is for. If you took a few minutes to read it, you'd know it is what you want if you don't want to unlock your bootloader. Its not a very long thead (141 posts currently) so it wont take long to read. The original post contains everything you need, except how to make sure you have Telnet as part of your Windows install (there are posts in that thread later that say what to do to enable/install Telnet as a Windows Feature inside Add/Remove Programs).
Sorry, if I come across as harsh. I know you just want to root without screwing up your phone, and I get that. But I'm afraid if you haven't been able to look around and find this stuff, you'll likely not be able to properly follow and understand the instructions and will therefore stand a good chance of messing up your phone!!!
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Again, I'm sorry for being stuck here and having to ask the question. I would greatly appreciate the assistance of someone who can speak to my specific situation.
Thank you and regards to those who can help.
Bull
bullpen7979 said:
OK. I am sorry about the post. I know I'm at the mercy of the forum here.
I was up till 2 am getting this phone unlocked, but when I installed wireless tether it said I was not rooted.
Had to install sdk, get a long unlock code, etc.
Evidently I have yet to attain root access, but its not as though I"m not trying.
I have done rooted/jailbroken a couple times before with my htc evo/iphone, and am fairly computer literate, but I just can't hash this out.
I read this thread, but could not quite make out the steps. http://forum.xda-developers.com/showthread.php?t=2509590., The video has no sound, which makes it a little more difficult.
Click to expand...
Click to collapse
The steps taken in the video are exactly explained in the post.
There are a few assumptions.. 1. Your PC has telnet on it, or you know how to install it. (there is a link further in that thread which Windows users can follow. 2. You have ADB Driver and Platform tools from the AndroidSDK installed correctly on your PC, and Moto drivers installed. Again, there are threads on this already, so you'll have to find/follow them.
You could also try to follow this post -> http://forum.xda-developers.com/showthread.php?p=47067076 however, it uses puttytel.exe instead of Telnet so it will look a little different. It too assumes you've properly installed ADB Driver and Platform Toos from the Android SDK along with the Moto drivers.
Another option is the "Tool Kit" -> http://forum.xda-developers.com/showthread.php?t=2477132 which is an "all in one" type tool that should set things up and help you too. I've not used it, but it appears to be a complete package including ADB and the drivers. Only thing would be if you want to use "Flash back to stock" you need to download the ROM file separately.
bullpen7979 said:
I have also read about an OTA on 10/7 or so that patched some of the root methods, so, at the risk of getting put in my place, I'm humbly coming to ask for assistance in helping get my phone rooted.
Click to expand...
Click to collapse
Right now, there is the rom the phone shipped with. If you have that, you use PwnMyMoto process to root it. The "camera update" that was pushed over the air. If you have that, you use RockMyMoto. And as of yesterday, if you have Verizon X, there is KitKat which can not be rooted (unless your carrier allows you to unlock your phone's boot loader)
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. Bummed. I just want my device rooted so I can send my daughter the one I promised here.
I tried the puttytel thread, but I kept getting a timeout like this guy did:
"After running cydia impactor I see a popup for a second that says payload and then it disappears. I then try to run puttytel but it just keeps failing with "network error: connection timed out"." That was the error I kept getting.
The other problem I am currently having is not being able to push files to my device because it doesnt show up as a drive letter. I have usb debugging enabled.
I would about paypal someone for some help at this point. I'd even accept remote assistance via logmein. Pretty bummed. I just want my device rooted so I can send my daughter the one I promised her.
I have no idea why this process has been so difficult this time around. I have rooted, downloaded & installed custom roms, etc.
http://forum.xda-developers.com/showthread.php?t=2536200
Please help. I am out of ideas.
jayboyyyy said:
http://forum.xda-developers.com/showthread.php?t=2536200
Click to expand...
Click to collapse
Isn't this just for the verizon model?
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
I have to believe it can be done, I'm just not getting it for some reason.
I'm really sorry, as I have said in multiple posts. Like I said, I would paypal you a reasonable sum if one of the more experienced people out there want to remote in via logmein and help. I know that sounds lame. I'm normally a guy who likes to research it all himself and do this.
I'm normally the guy who helps other people with this stuff, but I just can't hash this out. I've spent the last three days of my free time reading, researching, trying to get the thing to connect as a drive so I can push files to it and run them via adb.. Even went so far as considering buying a wireless adapter to put the files there wirelessly. I'd try now but I'm exhausted. If you can help, please PM me and we can work out something if you are willing. Thanks to those who have suggested methods. I do appreciate your help. I have tried them all except the last kit kat method which I thought was just for Verizon. I'm with sprint. As tired as I am, I'm afraid to brick the thing. I'm very close to asking for a method to restore the phone and take it back. I really wanted wireless tether. I need it for work and to run the ipad on occasion. Sorry this was a long post/thread.
Sorry I'm not as quick as the rest of you. Just want a rooted phone and can't seem to get it done this time on my own.
Any suggestions?
bullpen7979 said:
Isn't this just for the verizon model?
Click to expand...
Click to collapse
No. That will work for any Moto X Developer Edition or Carrier edition with an unlocked boot loader. So T-Mobile, Sprint, etc.. If you can unlock your boot loader via -> https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth then you can root via this process.
bullpen7979 said:
Guys/Gals/Developers.... I'm really stuck, and would greatly appreciate some help.
I have read thru the threads.
I can't get my phone to be recognized as a drive. Only a camera. Yes, I installed usb mass storage from play store. No luck.
I can't push files to the root of the device.
Click to expand...
Click to collapse
To get your phone to show up in windows as Drive Letter, needs USB Mass Storage mode. Ok, You've installed an app for that, fine... but 1. I'm not aware of that app working, and more importantly, 2. I am not aware of any root method in these forums that requires your phone to show as a "drive letter" to work. So I couldn't even begin to suggest what you are doing wrong.
What instructions are you actually trying to follow? Why not post questions on it in that particular thread, including exact details of what you've done, what you see on your phone, any/all errors or messages, etc.???
And if what you really want to do is tether with sprint, I hope you have checked out threads with suggestions on hacks/ways that work to tether on Sprint Moto X before you worry about rooting.
For example, if you want to remain non-rooted, FoxFi could possibly be an option. As I am a Verizon user and haven't used it, I can't say how well it works for Spint, and I can't say how well it works for Verizon, just that Verizon KK users say it doesn't work, but it did with the JB/4.2.2 roms..
KidJoe;
Thanks for your patience. I'm sorry about all of this. I have tried to be as clear as I can be, but I will redouble my efforts. Let me read clearly that last link and I will post back. I do want root access for all the other cool things it enables too, so I'm determined to get it right. I just want to be careful not to miss something and turn a decent phone into a paperweight.
That link you referenced is exactly what I used to unlock. When I reboot the phone, I get a white screen with a red exclamation point that says bootloader unlocked.
Fox Fi is a no go
Update. Just tried Foxfi. Does not work with current status of unlock but not rooted. I need root, but how does one copy files to the device via usb? I remember there being a setting.
I opened a new thread on this subject. http://forum.xda-developers.com/showthread.php?p=47740046#post47740046
Hope that's not against the rules. I really thing the failure is related to my inability (or ignorance of how to ) push files to the device.
Good gravy. This has eaten up WAY too much time.
Apparently its a mixed bag over at sprint. Some can some can't.
http://www.sprintusers.com/forum/showthread.php?t=234246
I've got a few questions for this utility that I have not seen any information on, and I have also emailed their contact email with no response for a few days now.
Some key questions:
Who is the developer(s) that created mofo?
Now, before you jump and say maiko, I know that he is directly involved with the device, but am unsure whether he wrote the mofo flashing utility AND made the rooted system image, or if he simply worked on a working rooted image.
Mofo is advertised to flash *system* images. If we knew how it did this, could we potentially write software to write a kernel image with write protection turned off?
I have never heard of mofo before, so I can only assume it was just recently created and therefore specifically only use able for the droid turbo. No where on their site do they imply that it is Droid Turbo specific.
I'm a c# and java programmer, so when I see a program that does what I want to do, naturally I will sit and try to figure out how it is done. I am now studying c and c++, and would really appreciate if someone knew (even just generally) how flashing a non-signed image is accomplished.
Silverlink34 said:
I've got a few questions for this utility that I have not seen any information on, and I have also emailed their contact email with no response for a few days now.
Some key questions:
Who is the developer(s) that created mofo?
Now, before you jump and say maiko, I know that he is directly involved with the device, but am unsure whether he wrote the mofo flashing utility AND made the rooted system image, or if he simply worked on a working rooted image.
Mofo is advertised to flash *system* images. If we knew how it did this, could we potentially write software to write a kernel image with write protection turned off?
I have never heard of mofo before, so I can only assume it was just recently created and therefore specifically only use able for the droid turbo. No where on their site do they imply that it is Droid Turbo specific.
I'm a c# and java programmer, so when I see a program that does what I want to do, naturally I will sit and try to figure out how it is done. I am now studying c and c++, and would really appreciate if someone knew (even just generally) how flashing a non-signed image is accomplished.
Click to expand...
Click to collapse
To answer one of your questions:
I believe u wont be able to use a different kernel without a bootloader unlock
I am a newbie and this is the first time I have tried anything out of the way to update my phone. I have an unlocked S6 edge AT&T version which was running MM 6.0.1. I wanted to update it to the latest Android Nougat and in order to do that I started searching online, but there was no such straight post or article where I can get everything in one place. I found a lot of information and many ways to upgrade the firmware but not all the steps were perfectly placed.
Anyways, I referred to many articles and posts and realized that it could be risky but doable so I went ahead and did it successfully. Though I faced few errors and issues but I found most of the resolution here at xda-developers and other online forums. I am writing this post to help all S6 edge owners who want to upgrade to Android 7.0.
My Phone Details:
Model: SM-G925A (S6 Edge AT&T)
Build: G925AUCS5DPJ1
Android: 6.0.1
There are two major steps involved to upgrade to the latest android version.
1. Flash the firmware with the higher security patch (keeping the device at Android 6) using ODIN software.
2. Upgrade the firmware to Android 7 using ADB software.
[Note: I might be using flash, upgrade interchangeably]
Downloads
Tools :
Latest ODIN tool (I used 3.10.6)
ADB tool (I used 25.0.3 but you can find latest version here)
Firmware:
First you need to flash you ROM to reach G925AUCS5DPK5 build. You can download this file from here.
Refer to Post:
https://forum.xda-developers.com/att-galaxy-s6-edge/general/g925a-pk5-stock-repair-ota-7-0-t3564102
Then you have to update the firmware to get Android 7 using this fie SS-G925AUCS5DPK5-to-U5EQA8-UP (put a .zip after this file to make it recognizable by the tool)
Step 01: Flash latest security patch
ODIN Working:
Link 01: http://droidvendor.com/how-to-install-stock-firmware-using-odin-on-a-samsung-device/
Link 02: http://www.droidviews.com/install-android-nougat-on-att-galaxy-s6-s6-edge-sm-g920ag925a/
My recommendations:
1. Use 3.10.6 version.
2. Unpack the G925AUCS5DPK5.zip file and you will find 4 different .tar.md5 files namely AP, BL, CP and CSC.
3. Use all 4 files at once in ODIN. Do not use only AP. If you use only AP file then your phone will be updated to the latest security patch and will work fine but it won't update the baseband version and will still show it as G925AUCS5DPJ1 even though your latest build is G925AUCS5DPK5. This will create problem while going to Android 7.0.
4. Take proper back up of all your files before going ahead using Samsung SmartSwitch.(Download Links : Windows, Mac). This way you can take back up easily as well as your pc will have the latest USB drivers.
5. Make sure your phone baseband and build are same as G925AUCS5DPJ1.
6. Charge you phone at least 70% before going ahead. It is just a precaution in case this process takes longer than expected. (Mine was finished in 4 minutes)
Step 02: Update to Android 7.0
ADB Working:
Link 01: http://www.droidviews.com/download-latest-adb-and-fastboot-sdk-platform-tools-win-mac-linux/
Link 02: http://www.droidviews.com/install-apk-files-using-adb-commands/
My Recommendations:
1. Use the version I have recommended above instead of going to the latest version (I faced some issue with the latest one and had to go back to this version)
2. Instead of opening the command prompt from shift+right click. Use run or search cmd and open it as administrator.
3. Change the SS-G925AUCS5DPK5-to-U5EQA8-UP.zip to OTA.zip or any shorter name. It will be easy to type the command.
4. If you face any error try using adb kill-server and then use adb sideload <ota.zip>.
5. Be patient this process will take some time. Mine took 25 minutes to complete.
6. Again keep your phone battery charged enough to survive the process.
7. After restart my phone stuck at black screen AT&T logo for 5 minutes. So don't get worried just wait, it will work.
8. Read all the instructions twice on the links provided before going ahead. If you are not sure of any instruction you can search xda forum and you will find relevant information.
Problems/Issues I faced
1. Reduced Storage: After updating my phone to build G925AUCS5DPK5, I realized the phone is only showing 16gb storage while my phone internal storage was 64gb. ( I found the root cause when I got my 3rd error, for the storage issue I was not bothered enough but wanted to go ahead so that I can get Nougat soon)
2. ADB Terminated: My phone got this error when I was updating it to Nougat. (The error looked like this : terminate called after throwing an instance of std::logic_error what() ). I searched online I found out that this is happening because of the adb version I am using, so I downloaded another version and it went through without this error but gave me the below one.
3. Status 7 Error: Again in adb I faced this error. And the error looked like this: 'Verifying current system..."/system/csc/contents.db" has unexpected contents. Error Pic Link.
I searched online and found out that this could be related to CSC file which I have not updated in my first step. So this time I again performed my first step using Odin tool but I selected the 3 files except the AP and ran the process. Yippy, I got my storage back and in adb there was no any error going forward.
Conclusion: I got Nougat on my At&T S6 Edge but I faced few issues. Being a new comer it was not much difficult provided you have the information and passion to do it. The steps mentioned here are very specific to S6 Edge but it can be used for other versions as well. You only have to make sure you have the current files and build combination otherwise your phone could be bricked. I hope this post will be helpful for the users.
Thanks for the detailed instruction on how to upgrade. Very useful! I do have one question though. Does Samsung pay work after upgrading using the method stated above?
Thanks for the great step by step guide. The only amendments/extra things that might help a little more:
Step 1) I used ODIN v3.12 as described above. Loaded all 4 files, BL AP CP CSC
***Basic missing step in the guide was to use ODIN correctly, you need to put your phone into upload mode.***
***Basic step, to prepare to use adb you must enable USB debugging while you have the Step 1 complete before you start Step 2***
Step 2) I was getting the errors thrown with ADB terminated and did some research. You have to use v25.0.3 or else it throws the std::logic_error what() error. It was challenging to track down that version of the adb but I found it here: https://www.izzysoft.de/ftp/local/android/
***Basic Step, in order to use adb, you must put your phone in recovery mode*** (and be sure you use v25.0.3)
Thanks again for the great tutorial!
Shame you cannot start out with latest version of Baseband version: G925AUCS6DQC1 that is in the phone and not have to go Back a version first to PK5
techwire said:
1. Use the version I have recommended above instead of going to the latest version (I faced some issue with the latest one and had to go back to this version)
Click to expand...
Click to collapse
i am curious, what specific issues did you have? should i stay on EQA8?
i had success with this method following the instructions and commentary going from DPK5 > EQA8. One additional thing to note is that each step of the process (odin, adb) will wipe the contents of the phone. I backed up with samsung switch, but it doesn't quite capture all the settings so you may want to use something else.
Hi
great post, i followed your instructions and i was able to get from DPK1 ( 6.01) to QA8. Now I noticed that G625AUCU5EQA8 is not the official ROM so would like to get at least to G925AAUCS6DQC1.
Do you know how to get from G625AUCU5EQA8 to G925AAUCS6DQC1?
thank you for your advice.
here is another DPK5 mirror
https://ulozto.net/!PpQ4SbJJOQyD/g925aucs5dpk5-6-0-1-4file-usa-att-7z
G925Aucu4dph5 is my build number, what can I do?
GoRi7o3 said:
G925Aucu4dph5 is my build number, what can I do?
Click to expand...
Click to collapse
You can Odin to Nougat 7.0 from here : http://forum.xda-developers.com/showthread.php?p=72406969
On Edge of Galaxy
You have any tutorial video of this or something that prove this method?
GoRi7o3 said:
You have any tutorial video of this or something that prove this method?
Click to expand...
Click to collapse
What proof do you need?
I don't now much things about this, can I jump to my baseband number g925aucu4dph5 to the baseband you mention in the post, or I have to do this method many times jumping from baseband to baseband to get the one you post
GoRi7o3 said:
I don't now much things about this, can I jump to my baseband number g925aucu4dph5 to the baseband you mention in the post, or I have to do this method many times jumping from baseband to baseband to get the one you post
Click to expand...
Click to collapse
Yes. You can jump from whatever baseband you have to most of full Odin files.
On Edge of Galaxy
Ok thank you, I will use this method soon, I wish that work
I am still rooted with OE2 5.0.1
Is there any way to update my device using ODIN without losing the root? Just curious. Switching to Fi and I unlocked my phone from the carrier, but since its 5.0.1 it wont run the Project Fi app which requires 5.1+ to activate and operate.
Illiteracy and instruction...
I would like to know why it seems like the only threads on how to upgrade a SM-G925A from 5.1.1 to Nougat lack clear language, in an organized fashion, that would allow those most challenged by the process to accomplish the task with the least amount of frustration. I really cannot comprehend how it is that someone considered a "Senior Member" is permitted to instruct on complex procedures, when it is apparent the person does not have a fluency in the language being used. I don't say this as an insult to anyone's culture or ethnicity, it just adds to the difficulty. Where are the moderators (Admins) when you need clarity. There must be someone who can impart the step-by-step procedure concisely. This forum is not useful for its intended purpose otherwise.
Alias_REBaker said:
I would like to know why it seems like the only threads on how to upgrade a SM-G925A from 5.1.1 to Nougat lack clear language, in an organized fashion, that would allow those most challenged by the process to accomplish the task with the least amount of frustration. I really cannot comprehend how it is that someone considered a "Senior Member" is permitted to instruct on complex procedures, when it is apparent the person does not have a fluency in the language being used. I don't say this as an insult to anyone's culture or ethnicity, it just adds to the difficulty. Where are the moderators (Admins) when you need clarity. There must be someone who can impart the step-by-step procedure concisely. This forum is not useful for its intended purpose otherwise.
Click to expand...
Click to collapse
What you talking about? This is very easy process. But there is even easier of you read another threads and learn from XDA or YouTube how to use ODIN. When you ready to try Odin you can flash firmware from here : http://forum.xda-developers.com/showthread.php?t=3611271 . This is 100% stock AT&T Nougat 7.0 Odin firmware use by Best Buys or Smasung to restore phones.
BTW Senior Members are mostly who build this forum. So just follow instructions, sit back and enjoy. If you need more clarification use your best friend Google or YouTube.
On Edge of Galaxy
Clarity wins
First of all, not admitting your English grammar is in need of some fine tuning doesn't help to clarify the issue. Additionally, combining both ADB sideloading and Odin, without clearly delineating which zip files need to be acquired for accomplishing the task using one or the other method, just adds to the confusion. I upgraded my phone using Odin and the "OCF" "tar" files. But, I was getting confused as to whether I also needed to use ADB to get to "OCF". I started off at "BOJ9". Not wanting to brick my phone led to much trepidation. I wanted to be absolutely sure. The main question I needed clarified was whether I could go from "BOJ9" to "OCF" without needing to go through each iteration. Many people had asked this question, but no specific answer was ever given. Thus, my frustration. I did eventually figure it out, but coming to XDA looking for a clear answer was not the solution. I see a lot of posturing, responders getting snarky telling the confused it's in some thread yet to be dug into or just being rude. Just help. Really, if that's not why you're here, move on.
Alias_REBaker said:
First of all, not admitting your English grammar is in need of some fine tuning doesn't help to clarify the issue. Additionally, combining both ADB sideloading and Odin, without clearly delineating which zip files need to be acquired for accomplishing the task using one or the other method, just adds to the confusion. I upgraded my phone using Odin and the "OCF" "tar" files. But, I was getting confused as to whether I also needed to use ADB to get to "OCF". I started off at "BOJ9". Not wanting to brick my phone led to much trepidation. I wanted to be absolutely sure. The main question I needed clarified was whether I could go from "BOJ9" to "OCF" without needing to go through each iteration. Many people had asked this question, but no specific answer was ever given. Thus, my frustration. I did eventually figure it out, but coming to XDA looking for a clear answer was not the solution. I see a lot of posturing, responders getting snarky telling the confused it's in some thread yet to be dug into or just being rude. Just help. Really, if that's not why you're here, move on.
Click to expand...
Click to collapse
First of all English is my sixth language I know 5 more, how much more you know, second this is international forum open for whole world, third I'm almost 55 years old and understand all process ( this telling me one or two things about you) . You must be millennial who thinks he is most important person on world. If you don't like it move on to different place.
And yes you can go strait by ODIN from your build to QCF with out any problem, but seems like you not read enough.
O! One more you must be Polish because only this people critique other people's language ability, I know because I was like this once.
Edit: Also I see inability to follow instruction or search. You need to have everything put for you on silver platter.
On Edge of Galaxy
Attitude instead of resolution.
So, here it starts, attitude. I'm 56 and will shortly be 57. I am no millennial. Secondly, perhaps you should focus on your English grammar skills. While you may speak several languages, your skill with written English is atrocious. Even if your English grammar was passable, you have no skill at writing an organized and cohesive text. A simple, step-by-step guide to accomplish the task. Putting up a few links mixed with gibberish is not helpful. It's lazy and sloppy. Have some pride in your work. Exhibit some maturity and avoid superfluous writing.
Hello everyone,
I have to say I am completely lost regarding the whole rooting process for the XZ1C. I usually manage to get where I want just by carefully reading the forums, but with this device, I feel overwhelmed by information. And I sometimes feel like what I am reading contradicts what I though I understood from previous reads...
I will try to sum up what I know so far.
First of all, I have a just-out-of-the-box Sony model G8441 with firmware 47.1.A.12.179 / Oreo 8.0.0 (never been connected to the outside world yet), and I want to properly root the device and install TWRP with no loss of feature.
What I think I understand:
To root, I first need to unlock the bootloader, which seems to be a trivial operation. However, this will break some functionalities due to DRM keys being erased. Once it is done, there is no way, ever, to get them back. There are however ways to "trick" DRM-related functionalities into believing DRM keys are still there.
Alternatively, there seems to be a way to backup the DRM keys prior to unlocking the BL, and this backup can somehow be reused and injected back into the unlocked device. If true, then this would certainly be a preferable method than the previous one, which would then be obsolete. However, it obviously doesn't look obsolete when I read the related topics, so I must be missing something...
Another thing I noted (but do not quite understand): There are ROMs for this device that "include" a DRM fix.
Last important thing I read: there is a paid "do-it-all" tool which takes my locked device and, with one click, makes it unlocked - rooted - DRM-fixed - TWRP-enabled. Now that sounds really good! Maybe too good?
As far as i know (but I learn new stuff every day on this topic) this DRM stuff is the main difficulty here. I understand that the rest of the process (root + TWRP) will be much simpler (although I'm old-school and completly missed all this magisk trend...!)
What I don't understand:
I read that some people downgrade to Oreo to be able to root properly, and at the same time, I read that Pie removed the restrictions on unlocked bootloader. So I still have no idea if I should connect and receive Sony updates, or avoid them.
Another thing I don't get, is how many ways do we have to root this thing? In the past, I was used to see, for a specific device, always one major and widly used rooting method. Here I fail to identify it...
What I think I will do:
1. Backup TA partition with j4nn's tool. This will probably imply flashing an older firmware right? Is there any link that could help me with this flashing process? (I only know Odin - did I mention old-school?) I saw this page for generic sony Z devices, but the thread is from 2013 and now closed. Is it still up-to-date or is there a newer thread?
2. Unlock bootloader and restore TA partition.
3. Wait for Sony updates? Or should I first hide unlock status?
3bis. Alternaltively to waiting for updates, maybe I can just flash the latest build? (47.2.A.8.24 if I am not mistaken)
4. Flash modpunk's TWRP.
5. Flash janjan's Boot.img to get root functionalities?
Alternaltively to all the above (except maybe step 1 that I will probably do in any case), buy the paid all-in-one tool (Xperifix), plug, click and wait... But will I really end up the same as with the manual way?
I saw a few other methods in the forums but it seems my brain is currently refusing to bring them back...
That's all I have right now. I would really appreciate if you guys could share some insight and tell me what you think about this, whether there are missing steps, useless steps, incorrectly ordered steps, silly steps, or if I'm just completely wrong about the whole thing.
Feel free also to correct me on the assumptions I made at the beginning.
Thank you very much for reading this repulsive piece of text.
SunJu22 said:
I would really appreciate if you guys could share some insight and tell me what you think about this
Click to expand...
Click to collapse
By the looks of it you have done a great deal of research on the project.
Yes, go down the route of backing up your TA partition first, but that is not a small step in itself, it's pretty complicated and if you get that working then the rest of the project will be a breeze.
You don't say what version of firmware you want to end up on. If you want to end up on Pie then forget the DRMfix . But if you're staying on Oreo and can't be bothered with lots of files & flashing, then this is the easy way out, I bought the paid version and can verify it works.
More recently I ended up janjan's kernel (Oreo build). Hidden root (Google Pay works), lots of performance tweaks, DRM completely working.
It's unlikely that anyone will bother making a DRM fix for Pie as the camera works and there are only a couple of other features that get disabled.
It sounds like you're not the sort of person who's only going to read the first couple of pages of a thread (or the last) flash the xxxxxx and then complain when it's broken.
The people on the forum here are very helpful and if you go into any of the threads you mentioned in your post with a question, you'll get a reply.
Good luck.
I agree, there is a lot of information out there and different methods of achieving what you want - very confusing if you have not been following the threads since the beginning.
In my opinion, the preferred method is j4nn's method outlined here: https://forum.xda-developers.com/xp...devonly-exploits-temp-root-to-backup-t3795510
Use that post as your main guide (the final step in that guide, #13, is how you will achieve root). You will use Newflasher to flash the various firmwares along the way (this is linked from j4nn's procedure in step #2). User munted made a very detailed pdf file that fills in some of the details on j4nn's procedure - see the following post and download the pdf attached: https://forum.xda-developers.com/showpost.php?p=78255334&postcount=382
Most of the other methods out there came before j4nn's work - they didn't include DRM backup/restore.
If you follow j4nn's procedure, you won't need to use the janjan kernel as you assumed - janjan method is different and does not overlap with j4nn.
SunJu22 said:
Feel free also to correct me on the assumptions I made at the beginning.
Click to expand...
Click to collapse
Sorry, I didn't point out that I was one of the early 'jumpers' who unlocked their bootloader without any backups, so I have been forced into always using fixes and all the information I have is based on having to fix your phone for it to work, but that's all changed now. I'm so out of date :-/
@camaro322hp is right, if you follow j4nn's method correctly you'll be rooted with no DRM loss. All of the other stuff is not required.
Thank you Digesteve and camaro322hp for your help.
From what I understand the XZ1C didn't get as much love as other devices, thus there was a long period of tinkering before a "do-it-all guide" could be considered "the" solution. That could explain all these different approaches that are proposed. Like you said camaro322hp it's rather difficult to jump on this train, and I can only guess how interesting this ride has been.
Anyway, I didn't see that the TA backup thread from j4nn also encompassed all the information I needed; I am glad to finally know that there is indeed a centralized "do-it-all guide" . To make it easier for XZ1C newcomers, I think j4nn should update his opening post to make this clearer.
Since I managed to grab the attention of 2 XZ1C power users, I would like to ask you: Did you keep stock? Did you try alternative ROMs? Do you like some of them? Do you prefer Oreo or Pie?
For information, the most up-to-date experience I have on a Android phone is my LG90 with CyanogenMod 11 (KitKat 4.4.4! Yes sir!). I heard that it's becoming less and less useful to flash a custom ROM due to major OS improvements, but I would still enjoy the simplest and lightest Android possible.
SunJu22 said:
Did you keep stock? Did you try alternative ROMs?
Click to expand...
Click to collapse
I've always been on stock, the camera is an important part of what I want from my phone and although there's lots of alternative camera apps, there's no competition to the stock camera app. Then I theme it black with swift installer and just uninstall or freeze any apps I don't want with Titanium Backup. I have stuck with Oreo, everything works perfect and I remember seeing so many people jumping to 9 then wanting to go back to 8 because they didn't like it. Something about changing the way the drop down menu works, among other things, but having never installed it, I'm not the person to comment on if it's any good or not.
I have been watching the XZ1c thread and Lineage is gaining ground, it even has a stock camera now. I would have thought something like that with miniGapps is going to be pretty lightweight and very similar to your carbon rom of before. At the moment this is based on 8, but is working well. Depends how keen you are to move to Pie.
Thank you Digesteve.
One thing I still don't understand. Part of the process is to hide unlock status. If I do this, FOTA will be applied and I will automatically end up on Pie, right? Should I skip this step if I want Oreo?
EDIT: when you say "a stock camera", you mean the Sony camera?
@SunJu22 I've stuck with the Sony ROM. A rooted stock ROM meets all my needs, so I've never felt the need to experiment with custom ROMs. There are some custom options out there that people seem fairly happy with, so if that's your thing, I'd encourage it.
Without going into too much detail, I'm still on Oreo for the moment, for a variety of reasons, but I don't know of anything that would keep me from recommending Pie.
One thing you should note is that once you unlock, there is no going back. AFAIK there is no known or working method to relock the bootloader.
SunJu22 said:
FOTA will be applied and I will automatically end up on Pie, right? Should I skip this step if I want Oreo?
EDIT: when you say "a stock camera", you mean the Sony camera?
Click to expand...
Click to collapse
Yes, I'm not entirely sure why having your rooted phone try and update itself is an advantage, but something I'd recomend avoiding.
Stock camera is the Sony camera, yes.
Thank you everyone, I believe I now have enough information to jump into this with confidence. The adventure begins, and will be reported in this thread for future reference, in the hope that it will help others like me!
Well, I am a bit sad... I wanted to report my "adventure" here in detail, but I'm afraid I have nothing to say.
Indeed, following the procedure from j4nn with a printed copy of munted's awesome guide, I managed to do all I wanted on the first attempt.
I don't have anything to add to this guide, everyone wanting to root their XZ1C can do it just by reading the opening post from j4nn and the mentioned guide. It takes a bit of time but nothing complicated thanks to the clear and detailed explanations.
I now have a fully functional rooted XZ1C (including camera) on Pie with Magisk root and TWRP.
Thank you all again from pointing me to the right direction.
I however have a slight disappointment. I wanted to start with Oreo and make an Nandroid backup before moving to Pie, but I didn't find Oreo builds on Xperifirm. So I jumped straight to Pie.
In case I want to test Oreo, I read that a downgrade is more complicated than an upgrade, but apart from the fact that a factory reset is needed for downgrade, I couldn't find an explanation for this. Any idea?
Last but not least: I looked for the latest Oreo build version number but couldn't find it. Do you guys know what it is and where I can download it?
I guess this will be all for this thread after this. Although it is very convenient to have my own thread to ask questions rather than finding the relevant page for each one, I don't want to annoy you too much...
EDIT: Please ignore the last question. I found out last Oreo build is 47.1.A.16.20, and I found the files via the download link in the opening post of the Lineage thread.
SunJu22 said:
In case I want to test Oreo, I read that a downgrade is more complicated than an upgrade, but apart from the fact that a factory reset is needed for downgrade, I couldn't find an explanation for this. Any idea? Lineage thread.
Click to expand...
Click to collapse
There is an easy solution to downgrade:
Newflasher
Hi, I've been thinking about rooting my XZ1c for a long time now. So, do I understand correctly that the ONLY disadvantage compared to non-rooted device is not possible to receive the OTA updates from Sony anymore?
mEREHAIGE said:
Hi, I've been thinking about rooting my XZ1c for a long time now. So, do I understand correctly that the ONLY disadvantage compared to non-rooted device is not possible to receive the OTA updates from Sony anymore?
Click to expand...
Click to collapse
No, you can flash a kernel to hide the bootloader unlock flag, this will mean that you will receive OTA updates, although depending on how you're rooted an update will most likely break your phone, so not that useful.
*made a thread*
Thanks--rooted withOUT adventure too
Very happily rooted now. Just wanted to say a quick thanks and add a few notes:
1. j4nn's renoroot to enable TA key backup and restore is fantastic. My advice: use and donate
2. munted's guide is excellent. clear and thorough...a rare combination.
3. do expect that renoroot may need to be restarted a couple of times. it took me 3 or 4 attempts to get temp root to pull the TA keys, although it took only 1 effort to get root back to restore.
4. topjohnwu's magisk is, of course, a key component to all this. Thx and $s there too.
I did a few things slightly differently/additionally than SunJu22.
5. I am on T-Mobile US, so I opted to create a hybrid Pie FW to get wifi calling and VoLTE. There are a number of discussions on this. I did it by combining the vendor**.sin and system**.sin files from custom-CH FW with the other files from custom-US FW. Of course (a) use IDENTICAL release numbers only, e.g. 47.A.2.10.28 w/ 47.A.2.10.28 and (b) you still need to delete .TA and persist files from the hybrid before you flash it.
Note: I don't really care about these features, but I have *heard* that T-mobile won't allow BYOD on their band-12 sites if they don't have VoLTE. Don't know if it is true (or where it is true) but figured why not?
6. I decided (for now, at least) to leave boot and recovery stock. So, I am using fastboot to run TWRP or a rooted kernel. Thanks again to j4nn for the method.
Note: I don't plan on allowing FOTA upgrades---I just like passing all the security checks and being able to *see* if updates are available.
That's all. Fine work in development and guides has made life simple and happy for me
kirkzp said:
Very happily rooted now. Just wanted to say a quick thanks and add a few notes:
1. j4nn's renoroot to enable TA key backup and restore is fantastic. My advice: use and donate
2. munted's guide is excellent. clear and thorough...a rare combination.
3. do expect that renoroot may need to be restarted a couple of times. it took me 3 or 4 attempts to get temp root to pull the TA keys, although it took only 1 effort to get root back to restore.
4. topjohnwu's magisk is, of course, a key component to all this. Thx and $s there too.
I did a few things slightly differently/additionally than SunJu22.
5. I am on T-Mobile US, so I opted to create a hybrid Pie FW to get wifi calling and VoLTE. There are a number of discussions on this. I did it by combining the vendor**.sin and system**.sin files from custom-CH FW with the other files from custom-US FW. Of course (a) use IDENTICAL release numbers only, e.g. 47.A.2.10.28 w/ 47.A.2.10.28 and (b) you still need to delete .TA and persist files from the hybrid before you flash it.
Note: I don't really care about these features, but I have *heard* that T-mobile won't allow BYOD on their band-12 sites if they don't have VoLTE. Don't know if it is true (or where it is true) but figured why not?
6. I decided (for now, at least) to leave boot and recovery stock. So, I am using fastboot to run TWRP or a rooted kernel. Thanks again to j4nn for the method.
Note: I don't plan on allowing FOTA upgrades---I just like passing all the security checks and being able to *see* if updates are available.
That's all. Fine work in development and guides has made life simple and happy for me
Click to expand...
Click to collapse
Now riddle me this cause I'm on Tmo USA as well and I did the hybrid work fine as well but heres the question, does googlepay and banking apps still work with a unlocked bootloader or did you flash a modified kernel to hide the unlocked status.
Sitting on the fence about unlocking mine so I can do a full nandroid before trying out some gsi pie roms infact this is the first phone I haven't unlocked or least put twrp on since my samsung sidekick 4g o.o
kernel with hide-unlock
T_Tank said:
Now riddle me this cause I'm on Tmo USA as well and I did the hybrid work fine as well but heres the question, does googlepay and banking apps still work with a unlocked bootloader or did you flash a modified kernel to hide the unlocked status.
Sitting on the fence about unlocking mine so I can do a full nandroid before trying out some gsi pie roms infact this is the first phone I haven't unlocked or least put twrp on since my samsung sidekick 4g o.o
Click to expand...
Click to collapse
Full disclosure: I don't use Google pay or too many banking apps, so YMMV. But, I am using j4nn's kernel with unlock hidden. (See link in my note 6.) You can flash this, or you can leave in your stock kernel and merely fastboot to this. From what I have seen, it hides most - if not all -- indicators that the phone is rooted and the BL in unlocked.
Does somebody has :
G8441_1310-7123_47.1.A.16.20-R7B_Customized_CE1.ftf ?
Only backup i did not make, and its gone from XperiFirm.
Still have the feeling battery life was better in Oreo, and would be nice for experimenting.
Would be nice.
Thanks in advance.