Related
New to android roms and accidently a I9000 rom (Ultimate) onto my I9000M. It now boots showing "Galaxy S GT-I9000M" and then changes to show "Galaxy S GT-I9000" and then stops there.
I am able to get it to boot into clockwork and have tried the restore all. But it is still messing up when booting.
How can I fix this? I am currently on a linux box, will I need a windows box with Odin?
Flash a i9000m rom, you can use heimdall instead of odin probably
Good I9000M roms?
Ok I have Heimdall and am still reading up on it. But looks straight forward enough.
Now to find a stable I9000M rom. Every reference to a I9000M rom I can find seems to be controversial, can anyone with a I9000M vouch for a rom? Is there a list of I9000M roms somewhere? Is there a link to the rom files of the official BMC 2.2 release? 2.1 is fine too don't really care just want to get back onto something stable for now.
i9000m is bell right ?? canada ?? if so try this http://forum.xda-developers.com/showthread.php?t=845558
that should do the trick
You can install I9000 roms on the I9000m, I have done with no problem maybe you install just got corrupted, reinstall the stock rom then flash the one you want over it. I know that darky and Docs roms work very well with our phones, I m on Darky's 9.2 with bells JL2 modem and it works fantasticaly.
Sent from my GT-I9000 using XDA App
azzledazzle, yup it's a Sasktel phone but they get all their phones from Bell Canada anyways.
So downloading the I9000UGJK3.tar right now. I guess what I am still not understanding is what all would have been overwritten by the Ultimate firmware when I flashed it in ClockWork Recovery? And what all am I going to need to overwrite to get back to working? I was on stock 2.1 when I flashed Ultimate. I900UGJK3 is a 2.2 rom as far as I can tell.
From what I have found the firmware would replace all sections of the PDA/Code: rootfs, kernel, param.lfs and the recovery partition.
Are the PIT files some kind of partition table? And would Ultimate have touched them?
Still can't find a good explanation of the CSC. Anyone help me out on what that actually is?
I am unclear if the boot loaders would have been overwritten at all? At least one of the went unwritten as I still have clockwork recovery. Is the ClockWork Recovery contained in one of the boot loaders or does it get a separate partition that the boolader just points to?
Modem is the radio firmware, I assume.
stock firmware will erase any traces of modifications including root lagfix apps anything you have done... if the firmware your downloading comes in 3 files use PIT and Re PARTITION in ODIN, this will completely restore the phone to the day it was made.
if it doesnt come in 3 files and only comes in 1 PDA file DO NOT USE PIT OR REPARITION.
but flash anyway and see what happens, ideally you will be needing a 3 file firmware.
but i only use I9000 I have no idea how the other SGS spinoffs work sorry.
Here is a link to JL2, the latest 2.2 ROM for the I9000M. I use it and I am very happy.
Working again
Ended up on JL2. Thanks to everyone for responding.
There were actually 6 files when I untarred (rootfs, zImage *kernel, param.lfs, secondary bootloader, CSC cache and modem). But it was pretty obvious how to load it into Heimdall. Turns out that part of the update was the second bootloader. Probably what was giving me the issues before.
Still curious if there is a developer or some documentation that can put a little bit more of an explanation of exactly what the param.lfs, Sbl.bin and cache.rfs (CSC) all do. I want to learn and become less of a button pushing monkey.
My LG E400 shut down and won't turn back on
hello
i think i had installed a wrong rom so my phone turned off and dont want to open again even in recovery mood
any help please
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
Looking to start flashing and obviously need ODIN3. There looks to be about 50 versions, http://www.filecrop.com/odin3-1.82.html
Which one do I need to work with my Captivate?
I have already used the oneclick for restoring my phone back to stock.
Ohhh... nice odin 1.82 didnt know about that one.
i just tried it its safe...
here ill post it
I used ODIN3 v.1.82.exe.
Cool. Downloaded. Now, where to obtain the correct .pit?
dont use a PIT!!! unless flashing BACK from gingerbread / CM7
every other rom eclair froyo custom have the same partitioning table. but some ROMS (eg the old rogers stock rom) are missing important files that SCREW YOU if you use a pit!
do not use PIT or check the re-partition (p in pit is partion) in odin unless you know you are changing the partitioning tables!
OK, so I've been reading guides, FAQs, how-tos, and various forum posts, and thought I had a pretty good handle on how to flash FW to this machine. So, last night I backed up everything important, and downloaded from here ( http://forum.xda-developers.com/showthread.php?t=1102881 ) the following:
2.2 UGKC1/UGKC1/BMCKC1/Sbl. This is the stock FW as currently installed on my I9000M from upgrading through Kies.
2.2.1 XWJS8/XXJPY/OXXJS5 (MultiCSC) (no sbl)
So just as a sanity test I first tried flashing the UGKC1 PDA file over to my I9000M using Odin. This worked as expected, since it's the same kernel.
Next, I tried to flash over just the XXJPY PDA file over to my I9000, using Odin. No re-partition, no PIT, no modem or CSC. No go - it just repeatedly displays the GT-I9000M screen and never boots the kernel. Couldn't get into recovery mode from this state, but was able to access 3-button download mode.
So, tried flashing over the 2.2.1 XXJPY PDA, Phone and CSC files. Same as before - no actual boot.
I flashed it back to the 2.2 UGKC1 PDA, phone and CSC files, and did a factory data reset and cache clear, and everything was fine running 2.2 again.
From reading here it appears that others have successfully installed 2.2.1 or even 2.3.x kernels on Bell Canada GT-I9000M phones. So, what important step did I miss?
Do I need to re-partitiion? Do I need to use a 2.2.1 FW that includes the boot loader?
For now I'm OK running 2.2, but would eventually really like to be on 2.3.x and don't want to wait for Samsung to make 2.3.x (what happened to 2.2.1) available to GT-I9000M phones. I'll leave it alone for now as I'm going on vacation in a couple of weeks and don't want a hosed phone.
What happens if you flash just a kernel like CF root or speedmod? My only other thought is to redownload jpy and try again as maybe the download was corrupted.
Also with another kernel like speedmod you could download and install a custom rom on cwm (clockwork mod) via recovery that is 2.2.1
I've had some problems with 2.3.4 (never tried 2.3.3) so I am back on Froyo for a bit until things get sorted out a bit more.
G
I don't know if there is a suitable version of CF Root for the UGKC1 firmware - they mostly seem to be oriented to the more international versions. As usual, in Canada we get something a little weird. Don't know about speedmod.
I don't think there should have been any problem with the downloads, as the files themselves are in md5 format, which means they are getting verified by Odin 1.8 when it goes to use them, as I understand it. If they were corrupted Odin should complain about it.
With the announcement ( http://forum.xda-developers.com/showthread.php?t=1158492 ) that Gingerbread is supposed to get an official release to Bell phones soon (which mine originally was), I might just let this lie, for now.
There is a gentleman on youtube by the name of AndroidGalaxyS (original, I know) that has some excellent and detailed walkthroughs and reviews of various ROMs for the I9000M.
youtube.com/user/AndroidGalaxyS
Specifically in your case, you'll want to watch this one that shows how to install 2.3.4 JVP:
youtube.com/watch?v=cLXQn0gOBuA&feature=feedu
Good luck.
I agree that the source maybe lacking. I just found out that the JL2 firmware from samfirmware.com is missing db_data file so I would always get an error after flashing that. KC1 would also not always boot for me so it might be missing something too.
That said what are you trying to accomplish? If you are just trying to go to another stock rom I'd just leave it and put a custom kernel on to give you root and CWM recovery.
Most any other Froyo rom is flashable from CWM in recovery and you do not need to worry about odin except to recover from bad things and it looks like you can do that. Gingerbread is different because they changed the bootloaders and that means Odin.
Of course its getting harder to dig back and find those Froyo roms since the rest of the i9000 world has been on GB for a while.
G
Thanks for the replies, so far. Mostly I was just experimenting, and trying out XXJPY was just a first step in my experimentation before moving on to GB. Part of the reason for this is that it seems like a lot of the modified kernels and so on are meant to be flashed over certain versions of the firmware, and those versions don't include the Bell/Virgin-specific ones. Or maybe I've misunderstood how this stuff works.
Yes, while my attempts to install XXJPY have been a complete failure, even when re-partitioning with a PIT file, when I re-flashed back to the stock UGKC1 FW everything was fine.
At this point I'm just trying to get a better understanding of where this went wrong. I've never specifically updated the SBL - the JPY package I installed didn't include it, and I didn't check off the "Update boot loader" box when re-installing KC1.
I've seen a number of posts here from people who updated I9000Ms to other FW, but unfortunately they don't seem to have detailed exactly where they started from, or exactly what they installed, or how.
Hey everybody,
Im kinda new to droid development, and have played around with it a little (flashing roms, kernels, rooting etc) however, im curious why there are roms based on pretty much every other firmware other than GKG3. I might sound like a n00b for asking about this but its mainly for my knowledge. I figured KG3 would be fairly common as it is one of the North American firmwares, but I must be incorrect? Anyways any insight on this would be great. Also a quick question, seeing as I am a Bell I9000m SGS owner does it matter if I put firmware from say Europe on my phone? I have noticed that my signal decreases when I put a rom on that is JVR based? Curious if this causes my phone, seeing as the modem is being changed to JVR, to think that I am out of country and will inflict long distance charges. This probably sounds like a dumb question, and I dont really believe LD charges will apply, but some confirmation would be nice as google didnt really help me out on this one.
Thanks!
KG3 is 2.3.3 and although it was just issued to Bell and other N.American customers, the rest of the Anfroid world has been using 2.3.4 for 6 months and some have moved to 2.3.5. The roms you see here are cutting edge and most use the latest firmware. The last official and stable release was JVR a 2.3.4 firmware and there are many good roms for JVR. It is easy to keep your KG3 modem in place and the KG3 CSC file and just upgrade your system to a custom JVR kernel and JVR rom.
I tried flashing galaxian's jvr kernel and it just bootlooped so maybe I'm doing this wrong? I kept my stock modem and CSC, flashed kernel using oden, factory reset was done as well as a cache clear prior to the flash and all I'm getting is a bootloop so I'm not entirely sure what I'm doing wrong any advice would be appreciated! And again thanx for the info in the previous post!
Sent from my GT-I9000M using XDA App
yes you flashed just the kernel, you must first flash the stock rom and then any custom kernel for the same firmware -- you need the stock rom to install the correct bootloaders prior to flashing the custom kernel
so in odin, flash JVR stock in pda, KG3 in phone and CSC
tick auto re-boot
then flash the custom kernel of choice in odin under pda
Awesome thanks for the tips! Will give this a try
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT. This should re-install basic 3BR functionality. I think you have not got the necessary bootloaders in the jump from froyo to GB and a complete stock install should correct this. Do tick re-partition and use 512 pit, do check auto-boot: let the phone boot and right itself. Check for 3BR and do a system reset.
Then flash KG3 modem and CSC. Your phone should then be functional.
Then flash a kernel with root inbuilt to it.
If you use the GTO Tornado kernel you can also clean your system completely as this stage instread. If you use another kernel, do the factory reset, davlik cache clean etc. prior to flashing the kernel as suggested above.
Do the clean prior to re-installing your apps.
lgsshedden said:
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT.
Click to expand...
Click to collapse
Thanks! will give this a go but have only ever really flashed a kernel before with odin so want to be doubly sure about these steps if that's ok? apologies for my noobish ignorance
- only found a 2.3.4 JVR at samfirmware - getting this and the 512pit file. This should be fine?
- then flash a KG3 modem and CSC - any idea where I get those files from? - the ones i've got now i only got through kies (and when i do get em, when i do this in odin do i only use the phone/csc boxes and leave pit empty/uncheck re-partition?
thanks again mate.
Edit: forgot to say my reason for questioning the JVR is because the one i have is listed as European...where as I have a bell mobility but in australia - does this matter? latest FW for aus/america is JVN 2.3.3
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
There is a thread on the KG3 firmware with lots of these questions answered: http://forum.xda-developers.com/showthread.php?t=1211939 and also the basic resource for firmware posted by Ramad here: http://forum.xda-developers.com/showthread.php?t=1102881 -- scroll down and you will find KG3 under N.American, he also has a nice set of illustrations for using odin.
You can also source a cwm zip for the KG3 modem from perka's stash here and on the market (free app) -- useful to havce the modem in cwm zip form as then you can just install a new stock firmawre such as JVR or JVT and add the modem in recovery.
lgsshedden said:
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
Click to expand...
Click to collapse
Thanks so much again - that looks like a hefty bit of reading to be done there via your links so before I do that, just one more Q please - and apologies if the answer for this is somewhere in the links you've provided.
i was just trying to read up about why the samfirm file extracts only to a single .tar file called JVR_JVR_JVR and how to use that in Odin and came across this thread:http://forum.xda-developers.com/showthread.php?t=1075278
my Q is - in this thread he makes a strong point of stating not to tick repartition and not to put the .pit file...but you say to do so.
am i missing something obvious?
well different people different perspectives on re-partition and pit.
Tick re-partition and flash the pit file. Leave it un-ticked and do not flash pit file. That's the only key: do one or the other.
As I understand it, the reason to re-partition is that it re-sets the base file system upon which you are now flashing the stock firmware -- seems a basic step whenever you move firmware versions e.g. 2.2 to 2.3, 2.3.3 to 2.3.4 to 2.3.5 -- not so much if you are installing a rom or kernel within that family of firmware.
Since I always then convert the file system to ext2 to speed up the system and I use damain's kernel to clean the system, I do use the pit file whenever I flash a new stock firmware to clear the basic file system and further aid removal of legacy files that could complicate the install.
---------- Post added at 09:28 PM ---------- Previous post was at 09:24 PM ----------
BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
thanks lgssheddon, for the info here and in the PM.
Will crack on now with reading all the links you provided.
I just have to say a big fat D'oh! - why oh why could I not find the answer to what was bothering me most ie. apparent loss of recovery mode. The very first post in the first thread you linked gave me the answer - that it is now a 2BR (and tried it on my phone et voila, by magic I can get into recovery again!). Don't know how I could not find this thread even when I searched "KG3"!!
Thanks again for your help. i'l llet you know how i get on once i digest all this info
doktorV said:
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
Click to expand...
Click to collapse
The 3 button recovery has changed for KG3. I believe it used to be upvol home and power. I do believe now it is volup, voldown, and power. This should work for you to get you into recovery to flash whatever you like. Also the samfirmware for JVR is branded with Swisscom and doesnt work very well for using it with a KG3 modem and CSC, with my experience anyway. I would recommend to go to a JVQ PDA and use KG3 for your Phone and CSC. Also after you have installed this make sure to check what your country code is and install it. Hope this helped
lgsshedden said:
[/COLOR]BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
Click to expand...
Click to collapse
The firmware that he is referring to doesn't. It is only one file meant for the PDA section of ODIN. Not entirely sure why they did this but i was running into problems with it as well. If you know how to play around with the core files you could in theory extract it to its root and put multiple files into .tar files (ex. select factoryfs.rfs, param.lfs etc. and place it under one .tar) but thats a lot of playing around and potentially dangerous if not done correctly.
not sure which download you are referring to but there was a branded version of JVR and a generic one on samfirmware: I have the one that does not have the swisscom logo and it certainly was extracted by 7zip into its component files (pda/phone/CSC) as they are still on my pc in that format.
You can also source stock firmware from Ramad's thread.
And I stand by my comment that for anyone using KG3 as a modem, JVR is the most stable official release available, much better than JVQ. JVT has a lot of promise and will be a better firmware than JVR but it is not yet had all the bugs sorted and while there are Gold Rom version for JVR any JVT rom is still at a beta stage and should not be used yet by someone just starting to flash custom firmware (IMO).
Hi again,
Q for lgssshedden really but if anyone can help i'd appreciate it!
have had 2 crashes now with Tornado Aureus RC1 - few little bugs/glitches eg with ringtone changing etc then on a reboot it won't go past the Tornado start screen with the big flame.
First time I just reflashed stock KG3 then reflashed the Tornado kernel, no problem. This time when I try to flash the Tornado kernel (either Aureus RC1 or Gold) it just bootloops at startup even though the flashing seems to go ok.
So now i'm back to (yawn) stock KG3 2.3.3. Really just want to root it again but with Tornado not seeming an option i'm finding it hard where to turn to root.
Thanks in advance!