Q: CWM flashable stock UGKC1? - Galaxy S I9000 Q&A, Help & Troubleshooting

Is it possible to use/make a CWM flashable version of the kc1 firmware for the i9000m with froyo bootloader? I'm currently using a gb rom (SURFACE by samhaleke) with Galaxian kernel. I'm having issues being stuck with the "Emergency Calls only" problem with nothing working to fix it and thus, I've decided to try to revert to stock before getting a new sim card.
Currently with Bell Canada, which is why it must be the UGKC1 build.
Thanks!

xWarMachine04 said:
Is it possible to use/make a CWM flashable version of the kc1 firmware for the i9000m with froyo bootloader? I'm currently using a gb rom (SURFACE by samhaleke) with Galaxian kernel. I'm having issues being stuck with the "Emergency Calls only" problem with nothing working to fix it and thus, I've decided to try to revert to stock before getting a new sim card.
Currently with Bell Canada, which is why it must be the UGKC1 build.
Thanks!
Click to expand...
Click to collapse
Yeah sounds like it could be a sim card issue.
Locate Perka's file stash on the market, and you'll find it in that application.
Good luck on getting the new sim card (if that is the issue)

I know that there is a cwm kc1 flashable modem file around. That would work too at least as a first bet.
G

Thanks for the suggestions guys but i need more than just the modem. Im trying to find a cwm flashable version (maybe even deodexed/rooted if possible) of the full firmware. Ill have access to a computer soon so ill be able to flash with odin anyways. If tjat doesnt work, new sim card hopefully!

not a cwm version but samfirmware does have the odin version of KC1
otherwise its just the modem portion that has been kept in circulation in cwm format
did you search the forum for March when KC1 was issued? does Ramad's thread have the full package still?

Already checked.. Its alright though, i got my problem fixed after talking to bell directly. Something wrong on their end. Haha. Thanks for the help though.

Related

[Q] I9000m Running GINGERBREAD???

Hi, the Gingerbread fever has started and everyone's bragging about it. I am on a i9000m and as some of you may have discovered this model is kind of cranky and does not flash everything like the i9000.
So could someone tell me if they have flashed their i9000m with a JVK successfully?
And if yes, have you tried reverting to stock?
Thanks!
And if you say yes...what steps did you follow to get to GB?
to get to froyo I meant...
I dont see a problem here, I have a i9000m and mine is not cranky. If my partitions get messed or something gowes wrong I usually just flash EZBASE on mine following his instructions, then I flash the JL2 found on Samfirmware without repartition checked to get back to original state.
http://forum.xda-developers.com/showthread.php?t=991792
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
I forgot exactly what the menus say but,
can you go to "wireless and network" then mobile networks. Then there is a a place for settings that let's you pick gsm/wcdma or GSM or Wcdma.
Select GSM only and see if your phone goes to No Service.
Thanks
Yeah it goes to no service in GSM only mode, no calls or data.
Videonut said:
I tried JVK but I seem to have lost the WCDMA 850 or WCDMA 1900 which ever one is GSM. I used odin and UGjl2 and put it in PDA and reflashed back to Froyo until I can get just the jl2 modem or the BMC CSC files. Don't know exactly which one I need to reenable the GSM.
Gingebread is awesome and for some reason the tv screen off animation is a must have.
Click to expand...
Click to collapse
Try this;
http://forum.xda-developers.com/showthread.php?t=787472
droilfade said:
Thanks Guys...So, when I flash GB with its bootloaders and then when I try to flash back to Froyo (Usually do it with JPC and then JL2) the bootloaders shouldn't be a problem???
Click to expand...
Click to collapse
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
jim5055 said:
I would be nervous about changing the boot loader from UGJL2. This is where the I9000M internal SD corruption fixes were done from the reading I have done.
Click to expand...
Click to collapse
Then how do you install GB. I don't think installing without bootloaders is good too!!! I was thinking if I flash to GB and to get back to froyo if I use a three file ROM like JPC.... I will be fine, no?
Mauro87 said:
I just flashed to JVK today using the firmware from samfirmware (european version) and it works fine, no issues here. Bell Galaxy S Vibrant.
Click to expand...
Click to collapse
Have you tried reverting to stock froyo???
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Videonut said:
I reverted to stock Froyo then used odin and only installed the PDA file.
CF-Root and JVK screenoff/batt.
Looks like I have both wcdma 850 and wcdma 1900 now.
Click to expand...
Click to collapse
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Sent from my GT-I9000M using XDA App
JJustin said:
So you are using jvk with the jl2 modem? Any incompatibility issues you've noticed so far? Thanks!
Click to expand...
Click to collapse
That's correct. So far no problems. The only strange thing was after the flash when rebooting it stopped at the recovery screen showing an error finding CSC information, can't remember exactly. I just selected reboot and all was good. I now have a KOR product code. If I was to flash again I think i'd flash the CSC file too.
I'd like to know if anyone has flashed all 3 files and has both wcdma 850/1900 working.
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Dawgplg said:
I flashed JVK the other day and so far so good. I first tried to install JVK without bootloaders but the phone would not boot after, just hung at the first Samsung screen. I flashed the bootloaders version (hesitantly since I am now on my 3rd phone), and it worked fine. Obviously I lost my 850mhz band, but got it back after flashing the JL2 modem. Knock on wood, but things are working great. I have since flashed a couple different kernel's. Used Clockwork Mod to get the CRT TV Off hack working.
I occassionaly run into a force close, but I found the same on the different versions of Froyo I have been running.
In case you are wondering. I flashed using Odin, no additional checkboxes were checked (no pit, no partition, no bootloader). After flashing I grabbed the kernel of choice and flashed it with same Odin settings. I did get error's moving from Speedmod to Ultimate Kernel. I ended up having to reflash the Ginger ROM to fix, then proceeded to install the Ultimate Kernel.
With respect to the bootloader issue for Bell devices. I do have concerns about flashing the new bootloaders, but am hoping that the steps taken to correct the Froyo JK4 debacle have been included in the new bootloader. Otherwise I may be in for another headache in a few weeks. I havent personally tried it, but going back to JL2 shouldnt be a problem. Might just have to check off the bootloader option in Odin to get back on the Bell JL2 bootloader, but not too sure.
Good luck.
Click to expand...
Click to collapse
Maybe you could try what is stated in this thread:
http://forum.xda-developers.com/showthread.php?t=997950
basicaly, you flash those modem:
Jl2 => JPD => (JQ1 was the ending there, but you should try to flash the modem from JVK)
By "tick off" you mean check it or no? Lol...
If you mean check it... I don't think its a good option. Rather why not just flash a three file ROM to get back!!
I'm running cm7 now and haven't tried going back to stock. I will give it a shot soon. The ROM is awesome but its the batt that bothers me!
Not sure if you were referring to my post but I did not tick off or check off any additional boxes when using odin. only the default boxes had a check. Repartition and Bootloaders were un-checked and I did not have to use a pit file.
In addition my modem gets 850mhz just by flashing back the JL2 modem file through Odin.
Btw, Darky RC3 ROM installed as expected. and by default ran the voodoo lagfix.
Phone is smoking fast....

[Q] Help! re: Flashing a Modem (Bell user) will GPS work ?

Ok so here's the deal.
I flashed JVK 2.3 (Darky's Rom v10 rc6 DarkyCore Kernel 2.2) and so the baseband is JVK i'm assuming
I'm having issues regarding the 850 band.
Q: what's the best modem for Bell users ?
Q: am I able to JUST flash a modem ? if so, how ? (through ODIN or CWM?)
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
I'm also having issues regarding downloading MP3's -- they all fail like those mp3 finder apps. But I can preview. WTF?
also my GPS isn't working - does a modem fix this ?
Funkadelick said:
Ok so here's the deal.
I flashed JVK 2.3 (Darky's Rom v10 rc6 DarkyCore Kernel 2.2) and so the baseband is JVK i'm assuming
I'm having issues regarding the 850 band.
Q: what's the best modem for Bell users ?
Click to expand...
Click to collapse
I am running KC1 - I have tried JL2, JL2 with JM9 GPS fix, JK4 but KC1 is the best to date and gives me best GPS performance to date. If you use non "native Bell" modem ie new Gingerbread modems there are steps to take to ensure 850MHz still works. You will need to review this forum I think. I have not tried such modems to date. You can use Froyo or GingerBread modems - no issue.
Funkadelick said:
Q: am I able to JUST flash a modem ? if so, how ? (through ODIN or CWM?)
Click to expand...
Click to collapse
Yes, CWM is best. I have many modems in the SDCARD root, quick and easy to change.
Funkadelick said:
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
Click to expand...
Click to collapse
Use CWM - get the modem files from Perka's File stash - look for the 850MHz section
Funkadelick said:
I'm also having issues regarding downloading MP3's -- they all fail like those mp3 finder apps. But I can preview. WTF?
Click to expand...
Click to collapse
Sorry, not downloading MP3 at present time (I have heaps already)
Funkadelick said:
also my GPS isn't working - does a modem fix this ?
Click to expand...
Click to collapse
Se above. But you should search this forum under GPS. If GPS has never worked you may have to do some hardware work. ie the contact from the PCB to the GPS antenna is pretty crappy and you may have to disassemble the SGS, stretch the contact spring a bit then re-assemble.
Funkadelick said:
Ok so here's the deal.
Q: Do I just put the modem file into the modem thing in odin and hit flash? can I flash a Froyo 2.2 (JL2) modem onto my Gingerbread (2.3) ROM ? If not, what's the best Modem to use ?
Click to expand...
Click to collapse
If using Odin(Definitely easier to use CWM as Jim said) you put the file(make sure it is for odin and not CWM) into the "Phone" section. And if on Gingerbread you're probably using CWM3 so if flashing it via CWM make sure it's a CWM3 version of the modem zip

[Q] I9000M Bell Vibrant Root

Hi all, so I recently sent in my I9000M Bell Vibrant to the service centre in Montreal to get it fixed (it had a fried internal SD) and they sent it back to me with a replaced motherboard (that's what I'm assuming because the phone's mac address changed and the internal SD is in working order now) but as a result the phone is no longer unlocked, which is a problem because I'm not with Bell.
They shipped the phone back to me with 2.3.3 installed, kernal version 2.6.35.7-I9000UGKG3 and I was wondering if anyone could help me root this thing so I can get it unlocked. I looked around the forum and tried SuperOneClick which didn't work and was unsure of where to go from there.
Any help would be greatly appreciated, thanks!
try flashing one of the kernels designed to install root e.g. Chainfire's kernel (basically stock plus root)or Hardcore's kernel (custom kernel but very robust) -- as you are on KG3 you will need a kernel designed for 2.3.3, not one for jvr or jvs.
Both CF and HC are very good at listing all their kernel variants with the right number of the firmware.
Flash using Odin with the kernel as pda, HC especially has some some clear instructions posted. It will leave you on KG3 stock rom and CSC.
You can also jump some steps, flash stock JVR as pda, leaving your KG3 modem and CSC in place, then flash a more recent JVR 2.3.4 version of either the HC or CF kernel or one like Damian's if you want to move further away from stock.
There are some further questions and answers in the thread on KG3 -- Bell users finally got a GB modem but not the latest GB firmware yet. Some have chosen to customize and go with thelatest firmware, some just wanted to root and stay on stock KG3.
adslee said:
Hi all, so I recently sent in my I9000M Bell Vibrant to the service centre in Montreal to get it fixed (it had a fried internal SD) and they sent it back to me with a replaced motherboard (that's what I'm assuming because the phone's mac address changed and the internal SD is in working order now) but as a result the phone is no longer unlocked, which is a problem because I'm not with Bell.
They shipped the phone back to me with 2.3.3 installed, kernal version 2.6.35.7-I9000UGKG3 and I was wondering if anyone could help me root this thing so I can get it unlocked. I looked around the forum and tried SuperOneClick which didn't work and was unsure of where to go from there.
Any help would be greatly appreciated, thanks!
Click to expand...
Click to collapse
hi did you ever figure out how to root this? i'm tryign to figure it out too
I have the same question.
I have the same question. All I really want to do is root the phone and keep the stock GKG3 kernel. However, I can't find a tool that works on the Bell i9000m running this 2.3.3 version of Android.
I've tried superoneclick and the Gingerbreak tool from Chainfire but nothing works.
Is the only way to root this to update the kernel? I was looking at the CF-ROOT downloads and not sure which one I would use if I used this option.
Kernel
thanks igsshedden. I found Hardcores kernel for the i9000m here
http://forum.xda-developers.com/showthread.php?t=822756
Updated Oct 27:
Found this method to update the I9000M http://blog.brahm.ca/2011/08/install-android-233-with-root-on.html
Will try and post my results.
Think it was cf-root 3.7 kernel that I flashed with Odin to get root then from there tried a bunch of roms now I'm using what's in my Sig and its wicked
Daily I9000M
Powered by
Semaphore 2.9.0s
Live OC 114%
Smartass V2, Smooth Ui
Running
SlimBean 4.2.1 Beta 1
Torlugic said:
Think it was cf-root 3.7 kernel that I flashed with Odin to get root then from there tried a bunch of roms now I'm using what's in my Sig and its wicked
I flashed stock jvp gingerbread with odin so the phone became an i9000, instead of i9000m then you can flash a rooted rom,I then used Galaxy S Unlock from the market to unlock. took a lot of figuring but it worked. good luck
Click to expand...
Click to collapse

[Q] i9000m CWM flash KC1 or KG3 baseband/modem ?

I'm a dev and I've spent 2 hours reading and trying...
Can I flash KC1 or KG3 from ClockworkMod 4 or 5 ? I'm on Linux and I avoid ODIN if at all possible.
I flash back and forth between CM7 nightlies and various MIUI ROMs. I need my SIM to work for s/w testing, for data and voice.
This i9000m phone is pretty new, was a Virgin Mobile model (pretty much Bell) and I use a SIM from an MVNO of Bell. (President's Choice.) With the stock ROM this worked without unlocking.
I tried some ZIP files for these basebands, meant for CWM3. I also tried replacing the modem.bin in the latest CM7 nightly. Nothing I do makes Settings -> About show a baseband other than "I9000XXJVK".
When I do a search for networks, it eventually shows me: 302610, 30220 and "CAN Rogers Wireless Inc." and I have emergency service I believe.
At the dial keypad I can't make "*#1234#" or "*#0011#" do anything.
Thanks !
No thoughts ?
I managed to get KC1 and KG3 loaded fine when installed along with Darky ROM using heimdall.
But when I install CM nightly, it overwrites the modem.bin.
And when I then use heimdall to flash the KC1 or KG3, CM says "Baseband version Unknown".
Same when I flash a modified CM zip with a new updater.sh and a removed modem.bin over Darky.
EDIT: Solved. I guess I need CM7/MIUI specific modems from this thread: http://forum.xda-developers.com/showthread.php?t=1158783
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
SiCRider said:
You're right buddy, that's exactly what i was going to say after reading your post.
Sent from my GT-I9000
Click to expand...
Click to collapse
Well, thanks...
Now if I can just figure out how to enable the "SIM Toolkit" app...

How do I downgrade back to stock Froyo after upgrading to Overcome 4.1.0?

I have T-Mobile Galaxy Tab 7.
After using Overcome for a day, I think I prefer Froyo. Could anyone guide me as to how I can go back to Froyo 2.2? Also, in the process of upgrading to Overcome, I upgrade the tab to 2.3.6 gingerbread. Is it possible to just uninstall the Overcome and use gingerbread? Please guide me thanks.
yes, just follow overcome guide again to restock.
That is by using Odin to install the GB-Stock-Safe from overcome site.
With that you will get GB samsung stock, without anything overcome at all.
You will get the dialer, so in theory you can make phone call with the right modem.
Unless you really prefer Froyo stock from T-mobile that doesn't have dialer, you can get download the firmware and flash it. (if you can find your firmware version)
priyana said:
yes, just follow overcome guide again to restock.
That is by using Odin to install the GB-Stock-Safe from overcome site.
With that you will get GB samsung stock, without anything overcome at all.
You will get the dialer, so in theory you can make phone call with the right modem.
Unless you really prefer Froyo stock from T-mobile that doesn't have dialer, you can get download the firmware and flash it. (if you can find your firmware version)
Click to expand...
Click to collapse
So all I need to do is install GB-STock-Safe with odin and I'm back to gingerbread? If that's the case, I would like that, I like gingerbread. Also, after I installed overcome, I did get the dialer but when I installed my AT&T sim card, it wouldn't detect it at all. I then used Galaxy S unlock tool from the market to unlock. I was able to unlock it and then the Tab was able to recognize the AT&T sim but when I dialed a number, it would automatically hang up. How do I fix that? Is there something I need to install to get the phone working? thanks a lot!
have flashed a different modem before?
T-mobile has a different frequency. You may be able to flash AT&T modem or other modem via CWM recovery.
There is a modem thread in the dev section.
priyana said:
have flashed a different modem before?
T-mobile has a different frequency. You may be able to flash AT&T modem or other modem via CWM recovery.
There is a modem thread in the dev section.
Click to expand...
Click to collapse
Could you give me the exact directions please? I'm new to this. thanks
you have managed to flash overcome 4.1, you can't be that new.
First go to your setting, About, and note down your phone Baseband
that is actually your modem version.
Now, if you restock back to GB Safe stock, you will not be able to do what I said below, because this is based on CWM recovery, which is included in Overcome Kernel.
The good thing is, once the right modem gives you all the functions (call, sms, data) you can then restock to GB stock safe and the modem won't change.
Go to http://forum.xda-developers.com/showthread.php?t=1069727
and download a few of the modems. Maybe a JPZ, a KM2, an AT&T modem, and T-Mobile modem.
Put them in your sdcard like when you flash overcome rom.
reboot to recovery
choose to install from sd card
locate the modem zip file and install it.
reboot and try out your data, sms, and phone calls.
If no good, reboot again to recovery and try different modem.
It is a hit and miss for some people.
If you already restocked and has no CWM recovery, you can still use Odin to flash just the modem.
wow it's working! i downloaded JPZ modem and did installed from internal sd and now i can finally make phone calls!!1 thank you so much! btw, can I now go back to stock froyo or gingerbread and still keep the voice? also, if I were to just use odin to flash the modem on a stock foryo galaxy tab, i should be able to make phone calls right? again thank you so much!!!
yes, that is right. The modem should stick, if you downgrade to GB stock safe.
Having said that, if you downgrade to Froyo and the package contains a modem.bin, then it will get overwritten. Then you need Odin to flash the modem again.
What network are you in? As long as you are not in T-Mobile network, you should be fine. I myself own a T-Mobile galaxy tab, using JPZ modem in Australian Optus network. I can make calls and have 3G/HSDPA data connection.
I'm using it on AT&T... i don't have a data plan, but if I were to get a data plan, would it work with the JPZ model or do i need to use anothe rmodel? thank.s
Hard for me to say. I don't know much about AT&T
It seems like HSDPA in AT&T is 1900 MHz
I am pretty sure most networks are on 2100 MHz (Europe, Australia, Asia)
Can you get a data plan SIM and try it out, and try the AT&T modem in the modem thread as well?
priyana said:
Hard for me to say. I don't know much about AT&T
It seems like HSDPA in AT&T is 1900 MHz
I am pretty sure most networks are on 2100 MHz (Europe, Australia, Asia)
Can you get a data plan SIM and try it out, and try the AT&T modem in the modem thread as well?
Click to expand...
Click to collapse
I tried AT&T modem but I lose voice communication.
weird,
this external link
http://www.talkandroid.com/21900-sa...ers-bell-hacked-for-voice-calls/#.TzDI56fnitI
implies that modem_bell_i9000.zip lets you make voice call using euro rom, and has data as well.
Hey, I was trying to install ICS after downgrading back to gingerbread from overcome.
So, after get the CM9 and gapps from humberos website, I put them along with the overcome kernel in the root of internal sd and reboot in recovery however, after flashing the CM9 zip, I cannot see the overcome kernel anywhere. So i proceed without flashing that and after rebooting i get stuck at galaxy tab logo. can you help? thanks
You wasted quite a lot of effort.
You should go straight to ics from overcome.
try flash overcome kernel using odin (the tar version of the kernel)
Then boot to cwm and flash cm9 rom again followed by humberos cm9 kernel for P1000.
But if you have patience, wait a day or two. Humberos will have newer rom+kernel that fixed slow wifi and quite a bit.
Meanwhile you can flash stock safe again while waiting.
Sent from my GT-P1000 using XDA App

Categories

Resources