Smh the youtube function hates me... click HERE to watch the video...
Touchscreen not working right as of yet... I strongly suggest a USB mouse and Keyboard for this... Touchscreen is pretty much unusable at this time. I would appreciate any help that can be offered.
First start off downloading THIS. It is the ROOTFS.. first off it needs to have the /etc/fstab edited properly to include / as mmcblk0p11 instead of 13... I know I know... This is a work in progress....
Next download THIS... Contains the ubuntu kernel and boot information.. the boot.img and system.img are for your stock ANDROID rom of choice.. just extract the IMG's out of the roms and place them in the folder..
Download THIS and place it in the directory you extracted the above files to.
ADB does work.. and you can ADB into your tab.. I have not created Windows directions yet.. but you can pretty much run the same commands...
I AM NOT TO BLAME FOR ANYTHING! This REPARTITIONS your device and ERASES EVERYTHING... you must do a FULL ODIN to restore to STOCK.... I am NOT responsible for anything that happens to your device.
remember to chmod +x nvflash and the script...
And wait......... It takes about 20 minutes to flash everything... be patient..
When it is done flashing boot up like you were going to go into CWM recovery... Your recovery is now your linux boot image.. You can use NVFlash to flash back CWM to apply whatever and just flash the linux.img back to partition 8 to get ubuntu back..
Thanks again to LilStevie.. without him this would not be possible...
my github code is availabe here.
If you would like to donate for my work and to the OMFGB/OMGB build box which I own and run click HERE
I'll pretty this up when I have a free minute...
Will this work if one has a locked bootloader?
Nice work, Poitee.
Sent from my Galaxy Tab 10.1 via Tapatalk
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
BlueGoldAce said:
Will this work if one has a locked bootloader?
Click to expand...
Click to collapse
I don't have much experience with the locked bootloader SGT's... Im sorry I can't answer your question...
I'm sure there's tons of interest. These tab 10.1 threads seem so slow at times. a lot different then I'm used to. I'd keep goin with it bro. its gonna be sweet.
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
This would derinately be useful to me, even more so if it could be dual booted, although I suspect my locked bootloader could be a stumbling block. Thanks for the effort you've put in so far.
R
rob61280 said:
This would derinately be useful to me, even more so if it could be dual booted, although I suspect my locked bootloader could be a stumbling block. Thanks for the effort you've put in so far.
R
Click to expand...
Click to collapse
It does dual boot... what it does is make your recovery partition your boot partition for ubuntu..
as far as locked bootloader... Im not sure..
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
yes please definitely interested in getting a version which fully works with the touch screen , that would be awesome!!
Of course were interested. Stop slacking and get past an alpha stage to a bets stage so we can all play.
Goodwork
This is friken cool man!
Keep on it, i would love to have ubuntu+ touch screen working.
I have a locked bootloader, but I would love to see this dual boot along side of honeycomb.
Sent from my GT-P7510 using XDA Premium App
This is awesome! Great job. I can't wait for a dual boot setup.
This is awesome! Definitely keep up the good work. It should work on a locked tab no problem you'll just need to use Odin instead of nvflash so a bit of modification is needed to wrap those images into md5 files for Odin. If I have some free time I'll try it on my locked tab.
Wow I just saw the video and I'm very impressed, I can see this making my netbook redundant I'll try it out once it becomes odin flashable and I have the time to find out more about how it works.
Thanks again for the effort so far.
R
My GT shows up Wednesday this week. Ill definitely be giving this a go
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
Yes, I would love to see some Linux working on a galaxy tab with touch screen functioning at minimum.
I was following viewsonic grab Ubuntu thread since last December but developers never got it working. Also video drivers was generic ones without hardware acceleration, camera and sensors did not work either... but this was less important for me then touch screen functionality.
If you can make it happen then by all means you should continue...
nice...
would any of the existing tegra2 development from motorola help? they got ubuntu running on the atrix device.. maybe something can be used?
im pretty sure it can be distributed onto many devices, as the ventana platform is standard, but drivers for touch, panel etc is missing..
how did you get the boot changed? how is the bootloader able to boot between 2 different kernels? do you have the source for bootloader available?
poitee said:
Hmph.. I would have thought more interest would have been shown in this... Should I continue development???? The asus guys love ubuntu on there tabs..... you guys let me know..
Click to expand...
Click to collapse
Im into it, but not until the touchscreen and the clockwork is fixed
atticusmas said:
Im into it, but not until the touchscreen and the clockwork is fixed
Click to expand...
Click to collapse
+1. I agree, especially about the Touchscreen, not many have the USB adapter to play around with it so that's probably why the reply count is low.
I think once it's usable without a mouse and keyboard you will see an explosion of interest in this. It's really a good idea to... really opens up the power of these things. Android is nice but it's kiddy stuff compared to a full blown Linux distro.
Linux for Tegra should help provide native 3D acceleration and stuff to If I'm not mistaken... I see a bright future for Ubuntu on tablets. (for nerds like us anyways )
Please don't stop development! lol I really look forward to it
Related
Sorry for this thread, but here is all so quiet and in our final user's mind there is an only one question: porting from stock nexus s to Galaxy s is already started?
And if the answer is yes, is something possible or not?
Thanks and sorry for this thread in development section, but we all depend on you BIG MEN xD
Yeah, that's a good question. Some guy in twitter has already made it booting on HD2 (not to the gui thought), and all we have here is silence. I hope that devs are just too busy working on sgs port to made a topic on xda)
Sent from my GT-I9000 using XDA App
Unrealwolf said:
Yeah, that's a good question. Some guy in twitter has already made it booting on HD2 (not to the gui thought), and all we have here is silence. I hope that devs are just too busy working on sgs port to made a topic on xda)
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I think it doesn't make sense without sourcecode. It's a waste of time.
But we've started using code from nexus s kernel @ galaxy s on CM6.1.
Has someone tried flashing Bootloader from NS on SGS? xD
I think noone is working on the port yet.
Atleast curio is not (yet?). Didnt hear anything about other kernel maker.
codeworkx said:
I think it doesn't make sense without sourcecode. It's a waste of time.
But we've started using code from nexus s kernel @ galaxy s on CM6.1.
Has someone tried flashing Bootloader from NS on SGS? xD
Click to expand...
Click to collapse
Somebody will end up with an expensive brick trying it
In my opinion it makes sense to start the work now, we got the full dump, the kernel sources and the initramfs sources.
Since Nexus S and SGS are really similar I'm quite sure we have everything to have a bootable system. Promise I'll give it a try on weekend if nobody does it before. My plan is modify init.rc to boot system from our current /data partition mainly /data/system/ where should be the dump.
Since NS kernel cannot see our internal OneNand partitions for the moment, I guess the only solution for now is everything on Movinand, which may be slow but...
Oh i am so friggin waiting for a port to happen!
for the last week i am checking in evrey 10 minutes to hear whats knew about the portation.
but till this point nothing has happened yet :/
hope there will be soon a kernel-hero which will pick up this good piece of work.
bye
Do the SGS and NS have the same memory distribution? I know that one uses iNand and the other MoviNand for Data but is the configuration itself the same? Do they have the same amount of OneNand for instance, same amount of memory, etc?
I already tried a port.
It's booting but chashes after pin code enter.
and whitout sim it crashes at homescreen.
will give info if i got it working.
Greetz, Paultje162
paultje162 said:
I already tried a port.
It's booting but chashes after pin code enter.
and whitout sim it crashes at homescreen.
will give info if i got it working.
Greetz, Paultje162
Click to expand...
Click to collapse
great! keep your work on
paultje162 said:
I already tried a port.
It's booting but chashes after pin code enter.
and whitout sim it crashes at homescreen.
will give info if i got it working.
Greetz, Paultje162
Click to expand...
Click to collapse
Is that without drivers for gps etc?
Sent from my GT-I9000 using XDA App
AlexandreT said:
Do the SGS and NS have the same memory distribution? I know that one uses iNand and the other MoviNand for Data but is the configuration itself the same? Do they have the same amount of OneNand for instance, same amount of memory, etc?
Click to expand...
Click to collapse
From what I've been reading both SGS and NS have 512mb OneNand and then 8/16 gb of MoviNand/iNand. I guess this should make conversion quite easy as long as drivers for the different components get adjusted to compensate small internals differences. If I'm not mistaken, drivers for the different components are included in the kernel and we already have source for the kernel. I guess it's just a matter of time but I'm hoping there are no showstoppers here.
I wish I could help out but I'm not even in the IT business... Best of luck and patience to the Devs!
jaju123 said:
Is that without drivers for gps etc?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
It's with the drivers but it is not funcioning correctly right now.
beceause there is not a really useble dump it's really hard to port it.
but i got it booting right now and home screen works.
but if you choose a app it crashes. will upload vid in a few minutes
greetings, Paultje162
paultje162 said:
It's with the drivers but it is not funcioning correctly right now.
beceause there is not a really useble dump it's really hard to port it.
but i got it booting right now and home screen works.
but if you choose a app it crashes. will upload vid in a few minutes
greetings, Paultje162
Click to expand...
Click to collapse
Oo!
I'm shocked ;D
Join #NSDev at webchat.freenode.net
13:20 <GuiPer_> im quite sure i know the problem...
13:20 <GuiPer_> no dbdata partition mounted or similar
13:20 <GuiPer_> or even cache partition
13:20 * haup3ng has joined #NSdev
13:21 <GuiPer_> it could explain crashing when launching apps
...
13:22 <GuiPer_> it would explain why apps crash
13:23 <GuiPer_> he need to modify init.rc somehow
Click to expand...
Click to collapse
from IRC, paultje162 you should come: #NSDev at webchat.freenode.net
Nuja said:
from IRC, paultje162 you should come: #NSDev at webchat.freenode.net
Click to expand...
Click to collapse
Just joined and I'm quite tensed what will happen
There you go:
http://www.youtube.com/watch?v=UdPJeGfyBsw
Beceause the theme of the nexus S is really ugly and to much rounded.. i used the gingerbread theme for froyo and ported that in aswell. btw i will post more videos later
Nice Gingerbread theme!
Nice! But can't help noticing that it is slow. It's still early days though, hopefully all will be good in days coming. Looking forward to this.
Sent from my GT-I9000 using Tapatalk
I don't know, that vid is not really convincing...and why remove the Stock theme and replace it right away...doesn't that increase the risk of something going wrong?
No offence, but I'm putting this in my "fake" folder for now...
Hi,
I wanted to see Tux on my phone, so I tried to make framebuffer console working.
Here is the result: http://www.youtube.com/watch?v=IB7g6zTDQjs
As you can see, android boots up with it, and I did not find any bug once booted, but if you try to turn phone on with USB plugged-in, it will freeze - I think something in display driver is wrong or the driver itself is not intended to be used with fbcon. But when I just plug USB to phone when its turned off, it starts charging.
Modifications to kernel with my comments(its kernel for froyo, I tested GB kernel as well, but its pretty much the same): https://github.com/Tasssadar/kernel/commit/b1c614341dbc04ec1ace604f0b4903944dd8aa9d
Kernel command line: console=tty0,115200 androidboot.hardware=thunderg fbcon=font:VGA8x8,rotate:1 mem=471M no_console_suspend=1
ZIP for recovery(for froyo ROMs): http://www.multiupload.com/NQQ1YKN6K8 - dont forget to make nandroid backup, it will replace whole boot partition, so re-flashing your kernel wont help.
Did anybody play with this already? Maybe solved the driver bug?
i dont understabnd what is this
very nice for debug ... sometimes we realy need this!!!
omg, this is soo cool =D cant help ya but i will try to make one of that for me =)
https://github.com/Tasssadar/kernel/commit/49ff95225eb724926434adaaa8abcd9a53c9b29b - makes it much faster, but without rotation. Or you can just turn off logo and rotation, result will be the same thing.
Working..
Ex.how to uninstall?
Flash your kernel again (that way you will see just black screen instead of logo) or restore from your nandroid backup, which I am sure you have.
What's the purpose of this, what does this do for our device
Sent from my LG-P500 using XDA App
Jrhodes85 said:
What's the purpose of this, what does this do for our device
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
If you dont know what it is just dont bother - this is devs stuff.
Sent from my Nexus S using xda premium
franciscofranco said:
If you dont know what it is just dont bother - this is devs stuff.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
@franco:
Why this is dev's stuff? let users install this nice thing and tell him it speeds up
the system as never seen before - most users want to install realy every thing
andy572 said:
@franco:
Why this is dev's stuff? let users install this nice thing and tell him it speeds up
the system as never seen before - most users want to install realy every thing
Click to expand...
Click to collapse
You guys should really let the users install it. It says it the topic title [DEV], the idiot who will install this and not know what it's used for is simply "stupid".
With fbcon log + camera(coolest debug log ever) I finally managed to make dual-boot working - I have one rom in the internal memory and another one on ext partition on SD card. It is however kinda tricky to make it working properly, would you like to see some dev topic with this or you think its useless?
AFAIK (correct me please) this displays kernel infos,so it's kinda useful to fserve,mik and others. However,I'll try to do that with mik's sources. I'll post it if you guys want.
ciaox said:
AFAIK (correct me please) this displays kernel infos,so it's kinda useful to fserve,mik and others. However,I'll try to do that with mik's sources. I'll post it if you guys want.
Click to expand...
Click to collapse
Wait, what? Is my english that bad or are you quoting my post, but responding to something else?
Tasssadar said:
Wait, what? Is my english that bad or are you quoting my post, but responding to something else?
Click to expand...
Click to collapse
Sorry,wasn't supposed to quote. Correcting now,thanks.
Tasssadar said:
With fbcon log + camera(coolest debug log ever) I finally managed to make dual-boot working - I have one rom in the internal memory and another one on ext partition on SD card. It is however kinda tricky to make it working properly, would you like to see some dev topic with this or you think its useless?
Click to expand...
Click to collapse
I don't use this phone regulary anymore, but it would be pretty neat to know how you did that - I have an idea of how it's done though.
Can anyone help me doing this for my lg optimus black?
Hey there...
I have a big problem...
I'm trying to port MIUI v4 JB version to our Milestone...
It's almost working but ends in bootloop everytime it booted...
i already saw the pin screen... but then... bootloop...
so i tried to make a logcat so i can find the errors...
But it seems that the adb service isn't enabled during boot...
so my question is how i enable the adb-service so i can make a logcat.
i hope u understand what i mean...
i'm from germany so sorry for my english ^^
Is there any info about your project?
Erovia said:
Is there any info about your project?
Click to expand...
Click to collapse
i don't know if i understand what you mean...
i'm just porting the miuiv4 versions with jellybean system to our milestone using the latest JB-Build.
but for some reason it wont boot...
in that case i have to make a logcat to find out where the errors are... but the adb-interface is does not start at boot.
need more information? ^^
If i were you, i would ask around in the #milestone-modding IRC. If they can't help, nobody can.
I've found a german portal, where someone is trying (or at least tryed) to port the ICS version of MIUI to the Milestone 1. Maybe they could also help. HERE is the thread.
Good luck.
I hope you succeed. :fingers-crossed:
Erovia said:
If i were you, i would ask around in the #milestone-modding IRC. If they can't help, nobody can.
I've found a german portal, where someone is trying (or at least tryed) to port the ICS version of MIUI to the Milestone 1. Maybe they could also help. HERE is the thread.
Good luck.
I hope you succeed. :fingers-crossed:
Click to expand...
Click to collapse
the post you sent me is from myself xD i am mancloud xD
but thank you
https://github.com/nadlabak/android...ob/jellybean/rootfs/init.mapphone_umts.rc#L55
write msc_adb to /dev/usb_device_mode (before usbd is started) and make sure that adbd is running
I'm also using aplogd, it stores logs in /data/logger:
https://github.com/nadlabak/android...ob/jellybean/rootfs/init.mapphone_umts.rc#L74
https://github.com/nadlabak/android...b/jellybean/rootfs/init.mapphone_umts.rc#L350
https://github.com/nadlabak/android...b/jellybean/rootfs/init.mapphone_umts.rc#L603
kabaldan said:
https://github.com/nadlabak/android...ob/jellybean/rootfs/init.mapphone_umts.rc#L55
write msc_adb to /dev/usb_device_mode (before usbd is started) and make sure that adbd is running
I'm also using aplogd, it stores logs in /data/logger:
https://github.com/nadlabak/android...ob/jellybean/rootfs/init.mapphone_umts.rc#L74
https://github.com/nadlabak/android...b/jellybean/rootfs/init.mapphone_umts.rc#L350
https://github.com/nadlabak/android...b/jellybean/rootfs/init.mapphone_umts.rc#L603
Click to expand...
Click to collapse
Worked! Big THX!!
It will be nice to just try new MIUI on our devices. Maybe new MIUI has better optimisation than MIUI GB which was more laggy than stock CM7.
i'm working on it...
but right now i'm stuck with porting the 2nd-boot to miui...
cause MIUI-GB and MIUI-v4 both need more ram... they're fast in the beginning... but are slowing down after a while...
but i dont get it xD
it seems i already managed to load the 2nd-kernel but then my phone turns black and reboots...
and the reason, why i think the kernel is loaded is: there is nothing in the 2ndboot.log file...
i'll keep on trying but it will be a bunch of work for my own...
Could you release a bootable version? (doesn't matter if it's slow)
I'd like to test it. (and i guess there are others besides me )
i'll upload a version at sunday or monday.
Well Sorry but i bought a new device recently..Its Huawei Ideos X5Pro(U8800pro) The thing is..the device has VERY less Devlopment Really annoying after Using Such an Awesome Device (Our mini tass)..Well The thing is..I dont really know how to make rom or kernels from sources..so just needed a few help from you guys..Just tell me how to maybe? I will make it for my device then too...so that atleast some development take place for the Ideos u8800pro too..Like Gal mini
-Rik[Rittik]
there's a lot of tutorials that you can learn from, just search first of all if you want to build roms from source, you need linux on your pc and here's a very good link that can help you get started http://xda-university.com/
yackovsky said:
there's a lot of tutorials that you can learn from, just search first of all if you want to build roms from source, you need linux on your pc and here's a very good link that can help you get started http://xda-university.com/
Click to expand...
Click to collapse
U8800pro forum is so boarin no one even bothers to reply..lol...Haha Yacko thanks agin bro
But Virtual Box can be used for installin ubuntu and makin roms?
-Rik[Rittik]
Rittik said:
U8800pro forum is so boarin no one even bothers to reply..lol...Haha Yacko thanks agin bro
But Virtual Box can be used for installin ubuntu and makin roms?
-Rik[Rittik]
Click to expand...
Click to collapse
with VB it is a lot slower, better make a multiboot on your pc
yackovsky said:
with VB it is a lot slower, better make a multiboot on your pc
Click to expand...
Click to collapse
Thats a prob..Actually i dont owny own lappy..so use my dads he wont lemme multiboot ..nyway kernels need linus rite? so widoout ubuntu am Crippled in the world of dev?
-Rik[Rittik]
If you want to have good performances without a real multiboot and you're on windows, you can use wubi..Good luck!
Asbusto said:
If you want to have good performances without a real multiboot and you're on windows, you can use wubi..Good luck!
Click to expand...
Click to collapse
whats tht?
-Rik[Rittik]
it is an installer of ubuntu..it creates a dual boot menu so you can choose at the startup the os to run but it can be uninstalled like an application in windows from the control panel..Here you can find more infos
http://www.ubuntu.com/download/desktop/windows-installer
i also suggest you to use a previous ubuntu version if you want to build from source cause the latest are only experimentally supported
yeA i got that ...but i guess all the time u unistall then install again..it dowoads 700mb..which aint a small thing
-Rik[Rittik]
Rittik said:
yeA i got that ...but i guess all the time u unistall then install again..it dowoads 700mb..which aint a small thing
-Rik[Rittik]
Click to expand...
Click to collapse
Buy a Ubuntu CD, or download Ubuntu.
No, you don't need a install and uninstall.Anyway, just tell your dad i need a dualboot. You need to prove your Ubuntu skills, that's what i do to get dualbooting in my dad's laptop.
hey i posted a thread here after installing virtualbox.You guys know what to do after this?
http://forum.xda-developers.com/showthread.php?t=2095068
-Rik[Rittik]
it's just the first result from google http://www.psychocats.net/ubuntu/virtualbox
Nah i already inatalled Ubuntu am getting those errors
-Rik[Rittik]
As most of you all know i am an avid phone explorer. Lol. Yes corny as it sounds, but i can get all sorts of things one would not normally try to flash to flash and actually boot. Myself and proto devano (sp) are going to port this Android Q leaked image or whatever soon as we get it. For the op6 and op6t..if anyone happens to have any insight as to where to procure this, please lemme know..
i have already flashed the pixel 3 and 3xl system images and gotten them to boot on my op6t. Not the port, the firmware. My friends are aware of the progress. Calls, web, and text work. Navigation is broken but i do know how to fix it with a few bits of hackery. But its not at the top of my list as i have been source building again and trying to learn new device bring up, which i hadnt done before. ( I have built roms but always a continuation of an existing project). So this will be my next port soon as we get the image, payload.bin, etc. If u can help, great, let me know. We can bring Q to oneplus, early.
this oh WOW... sounds very exciting ?
I was just reading about Q on XDA here https://www.xda-developers.com/android-q-dark-theme-desktop-mode-permission-revamp/
I wonder if the author of the news might be of some help in getting it being that they were testing it out?
Jeffro64 said:
I was just reading about Q on XDA here https://www.xda-developers.com/android-q-dark-theme-desktop-mode-permission-revamp/
I wonder if the author of the news might be of some help in getting it being that they were testing it out?
Click to expand...
Click to collapse
Yea he helped me get the mclaren files before. I emailed him. So, we will see
fullofhell said:
Yea he helped me get the mclaren files before. I emailed him. So, we will see
Click to expand...
Click to collapse
Cool...Maybe he will help you out again. I leave tomorrow morning to go back to work offshore so I will be out of the loop until I get back. I'm already excited to see how far the progress on this phone has gone when I get back! Should get my unlock token today even though it's not really needed any more, but I figured it will be good to have if I ever decide to put the stock software back on the phone after I move to the International software. It's going to be a long hitch out there thinking about all the OP6T goodness cooking up while I'm gone LOL!
delete
liam_davenport said:
Possible Android Q GSI
https://mega.nz/#!B1pmxYwa!Gj6zHOofpGnqZmbtHsFIz5MZptnc8qvyX4pZlIxN-V0
Edit: can't post the source XDA is blocking the link as it's another forum.
Use with caution as not tested.
Click to expand...
Click to collapse
Awesome man! Thank you very much!
Man, I'd love to get the Pixel software on the 6t....call screening is a huge benefit; and the only reason my (converted to int'l) 6t is the fallback device to my P2XL. If I could get the pixel images running on this thing well - it'd be game over for my 2xl...
One can dream, right?
PhoenixPath said:
Man, I'd love to get the Pixel software on the 6t....call screening is a huge benefit; and the only reason my (converted to int'l) 6t is the fallback device to my P2XL. If I could get the pixel images running on this thing well - it'd be game over for my 2xl...
One can dream, right?
Click to expand...
Click to collapse
I am working on it, prob really is the navigation bar is derped. Patching a few things may fix it.
fullofhell said:
I am working on it, prob really is the navigation bar is derped. Patching a few things may fix it.
Click to expand...
Click to collapse
Holy Shift dude, that is fantastic news! If you need any help or testing, let me know; this would totally put my 2XL out to pasture.
liam_davenport said:
Possible Android Q GSI
https://mega.nz/#!B1pmxYwa!Gj6zHOofpGnqZmbtHsFIz5MZptnc8qvyX4pZlIxN-V0
Edit: can't post the source XDA is blocking the link as it's another forum.
Use with caution as not tested.
Click to expand...
Click to collapse
Fake. That's just AOSP master with December security patches, ie. no internal Google patches.
fullofhell said:
Yea he helped me get the mclaren files before. I emailed him. So, we will see
Click to expand...
Click to collapse
Sorry, I can't share the files publicly :crying:
MishaalRahman said:
Fake. That's just AOSP master with December security patches, ie. no internal Google patches.
Click to expand...
Click to collapse
Okay thanks for clarification will remove the link.
Hmm that stinks, it doesn't have the system dark so must be but the other stuff in the review are in this. Here's some screenies. Says Q but anyone can do that..strangely enough it works just as crappy as the Jan pixel 3 stuff I flashed..thanks anyways guys
fullofhell said:
As most of you all know i am an avid phone explorer. Lol. Yes corny as it sounds, but i can get all sorts of things one would not normally try to flash to flash and actually boot. Myself and proto devano (sp) are going to port this Android Q leaked image or whatever soon as we get it. For the op6 and op6t..if anyone happens to have any insight as to where to procure this, please lemme know..
i have already flashed the pixel 3 and 3xl system images and gotten them to boot on my op6t. Not the port, the firmware. My friends are aware of the progress. Calls, web, and text work. Navigation is broken but i do know how to fix it with a few bits of hackery. But its not at the top of my list as i have been source building again and trying to learn new device bring up, which i hadnt done before. ( I have built roms but always a continuation of an existing project). So this will be my next port soon as we get the image, payload.bin, etc. If u can help, great, let me know. We can bring Q to oneplus, early.
Click to expand...
Click to collapse
Hey...I see I am a little late to this party, but I read recently we are getting a dev preview of Q "officially." I found a link to a GSI zip and a recovery (not the mega one in this post), but there is no installation guide. I did this with P on my last phone (G5+), so I know there is a little more to the process than a simple flash. I am pretty sure I should not post the link, but PM me if you can shed any light. Thanks in advance...
hithekillswitch said:
Hey...I see I am a little late to this party, but I read recently we are getting a dev preview of Q "officially." I found a link to a GSI zip and a recovery (not the mega one in this post), but there is no installation guide. I did this with P on my last phone (G5+), so I know there is a little more to the process than a simple flash. I am pretty sure I should not post the link, but PM me if you can shed any light. Thanks in advance...
Click to expand...
Click to collapse
Message sent.
The picture in selfie is Blue.
V. 3.9
OnePlus 6T
Now that Android Q Beta 2 GSI images have been released, anyone tried to boot them on OP6T? If yes, please share your valuable feedback.
gururoop said:
Now that Android Q Beta 2 GSI images have been released, anyone tried to boot them on OP6T? If yes, please share your valuable feedback.
Click to expand...
Click to collapse
Doesn't boot
Yeah I tried both, and with 9.012 and beta 7. Gonna try with custom vendor and stuff..
And why would you port a leaked/early/beta version of system? What's the logic?