hey,
i haven't used my samsung gt i9000 in a while and i just went back to use it. while charging it, all i get it is something that looks like a spinning cursor that just blinks on the screen. i don't remember if that is normal or not.
anyway, when i unplug it from charging, the logo screen starts but then it blinks back to black and then back to the logo screen and that continues for ever.
i can get into the down+power+home button screen (download, do not turn off device with construction android dude) and i'm wondering if there's anyway to fix this or maybe tell me what's going on.
also, i was wondering if there was anyway to start from scratch in terms of flashing that i've done before. to wipe everything and start loading up things from the start. i don't remember anything i've done with this phone from before so that's why
THANKS
You could try flashing a stock rom through odin
Sent from my SGH-T959V using XDA App
so i did that, loaded 2.3.4 gingerbread using odin. odin said it passed it rebooted.
a few things i noticed right off the bat: the battery charging symbol is working properly now with a battery loading up and little dots under that scrolling through. however, i'm still having the problem where it loads up, goes to the samsung galaxy s gt i9000 logo loading screen (like before) and then it just sits there for a bit (10-15 seconds) and finally restarts. it keeps looping through that.
any ideas?
Try odoning froyo
Sent from my SGH-T959V using XDA App
I'd suggest flashing jm9 eclair - it's fixed any issues i've ever had, some of which have been MAJOR! You can grab it from samfirmware
Good luck. let us know how it goes.
S.U.R.F.A.C.E 2.something
tried to reload froyo with odin again and when it comes back to the recovery screen i'm getting:
E: can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared ye. Pleas use UI menu for format and reboot actions.
copy deault media content failed.
i tried to update using update.zip or something like that and it gives the same error but instead it says there's a problem with the zip.
any ideas? just to make sure, i have the samsung galaxy s gt i9000 (Canada)
That's usually a dead sd card, flash a stock rom and send it in under warranty. They are all under a year old so don't let a lack of receipt stop you.
Sent from my GT-I9000M using XDA Premium App
usually? is there anything else i can try before sending it in?
tazmania123 said:
tried to reload froyo with odin again and when it comes back to the recovery screen i'm getting:
E: can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared ye. Pleas use UI menu for format and reboot actions.
copy deault media content failed.
Click to expand...
Click to collapse
Did u format the sdcard from the menu that appeared with the error?
On my phone flashing froyo does that also, but just selecting "Factory Reset" and "Wipe SDCard cache" from the menu and rebooting works for me.
tazmania123 said:
usually? is there anything else i can try before sending it in?
Click to expand...
Click to collapse
Lots - look in the stickies for links to the I9000M issues. But unless it's just corrupted, where a good flash with repartition should fix it, I think that particular error is the bad one we I9000M owners dread.
Sent from my GT-I9000M using XDA Premium App
tazmania123 said:
usually? is there anything else i can try before sending it in?
Click to expand...
Click to collapse
Are you flashing stock firmeware with the three files and pit file through odin which includes the bootloaders? Not saying you arent but there is not much info on how you are flashing.
Related
Hi,
I flashed the Pre rooted JP3 from http://forum.xda-developers.com/showthread.php?t=748131 and then installed the [UTIL] One Click Lag Fix 2.0 from http://forum.xda-developers.com/showthread.php?t=751864
I used the phone for a couple of hours and then all of a sudden everything kept crashing.
I booted into the clockwork recovery and reset to factory and then was not able to boot.
I tried flashing back to I9000UGJH2 with Pit512 and Odin and after it flashes successfully the phone starts I see the galaxy S I9000 and then it shows me a grey battery sign and then a busy circle sign and then gray battery and keeps repeating.
When I boot without the usb cable it shows me the Galaxy I9000m sign and then just turns off.
When I tried reflashing the JP3 from the site above and after it finishes it comes to the Android System Recovery <3e> and displays the following message:
Update Media please wait
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory) E:copy_dbdata_media:Can't mount SDCARD:"
Your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
When I boot it moves past the Galaxy I9000m screen shows me the galaxy screen with animation and sound, the screen then goes of leaving me with a black screen and the buttons lit.
I cannot format the internal SD card and I cannot seem to get the hone to boot into android, I can boot into downloader.
Any help would be appreciated
P.S. I have ticked the repartition option in Odin
Odin should theoretically work. I've never clicked repartition myself however a lot of people do seem to recommend it.
If you're out of things to try and you want to give the latest (not publicly released) version of Heimdall (my Odin flashing software alternative) a go let me know and I'll PM you the download link.
That gray battery with a spinning circle sounds like the charging screen when the phone is off. Have you tried and let it charge up over night?
The battery is full.
I managed to get the I9000UGJH2 rom up and running by inserting an external sd card.
But here are some issues:
Once booted neither of the SD cards are recognized
If I power down / reboot phone, it will not start again, it shows the I9000m screen and turns off.
I suspect whatever the one click lag did to my SD cards needs to be reversed.
Ok,
So after tonnes of playing around with the device. I can confirm that it has something to do with he internal SD card.
I need to somehow format the entire internal SD card so that even Odin can see it. I tried using the stock recovery and clockworks with no luck.
It just wont see the card.
Any suggestions?
Phone won't reboot ODIN says PASS, Frozen on Galaxy S home screen
I first installed JP2 and was able to get it working. Then I made an attempt to install JP3 but it didn't work. My phone screen kept on flashing i.e. off and on. I then went back and tried to install JP2. While I was installing it, I got an error message saying unable to mount sd card (similar to what rumy got). I am in the exact scenario as rumy and now i don't know what to do. It's a brand new phone and I am very scared.
Any ideas on what I can do now. I am installing JH2 as I write. Hopefully, that will work.
Please help me if someone knows how to get out of this situation.
thanks
galaxys00 said:
I first installed JP2 and was able to get it working. Then I made an attempt to install JP3 but it didn't work. My phone screen kept on flashing i.e. off and on. I then went back and tried to install JP2. While I was installing it, I got an error message saying unable to mount sd card (similar to what rumy got). I am in the exact scenario as rumy and now i don't know what to do. It's a brand new phone and I am very scared.
Any ideas on what I can do now. I am installing JH2 as I write. Hopefully, that will work.
Please help me if someone knows how to get out of this situation.
thanks
Click to expand...
Click to collapse
Well, I am still trying but no luck.
We need an adb expert / odin one to help us somehow repartition the internal sd card I think.
I believe with the lagfix on jp3 it got repartitioned and then corrupted.
I also think we should start adventuring outside this device as there might be more senior trouble shooters / experts who own other htc devices that might be able to help.
I used to get this on my htc dream try going back to original firmware the only I found it to work was rip a rom to pieces get misc.img then enter console via recovery and flash_image misc misc.img then something else but cant seem to remember think its mount-o rw,remount -r yaffs2 /dev/block/mmcblkop3 /system. dont quote me on this try typing the error into google
Sent from my GT-I9000 using XDA App
rumy said:
Well, I am still trying but no luck.
We need an adb expert / odin one to help us somehow repartition the internal sd card I think.
I believe with the lagfix on jp3 it got repartitioned and then corrupted.
I also think we should start adventuring outside this device as there might be more senior trouble shooters / experts who own other htc devices that might be able to help.
Click to expand...
Click to collapse
The lagfixes do not repartition anything so this is (most likely) an issue that is not related to the lagfix.
Try going back to somthing like JF3 with the 513.pit file and repartition enabled.
The exact same thing happened to me - installed JP3 then lagfix. Phone was unstable after so I tried to reflash via ODIN (with repartition) and no matter what I did I could not successfully reflash my phone or get it to boot.
Only solution - returned it to the store as a DOA and got a replacement device.
Upon further research, it is known that JP3 screws up the internal SDCARD. Marks it as read only or something like that - search google for JP3 sdcard for more details.
Bottom line - your phone is bricked. Sorry to be the bearer of bad news.
I wonder if this would help fix it.
http://forum.xda-developers.com/showthread.php?t=762135
rumy said:
I wonder if this would help fix it.
http://forum.xda-developers.com/showthread.php?t=762135
Click to expand...
Click to collapse
That installs a different Linux distro underneath android and is totally unrelated! (Not to mention not doable in the state the phone is in)
OT: I don't believe you should give up quite yet. Try flashing a new firmware and afterwards, install Clockwork recovery!
From there you can format your internal SD. You will lose all your data but I strongly believe it will help fix your problem from what I have read here so far!
Edit: I added a warning to the flash guide in my FAQ for I9000M owners for now!
hey try this
Why dont you try to use the odin 1 click downloader over in the captivate forums. I know that we captivate people are running the i9000 firmware with a stock captivate kernal under it. Worth a try.
ice3186 said:
Why dont you try to use the odin 1 click downloader over in the captivate forums. I know that we captivate people are running the i9000 firmware with a stock captivate kernal under it. Worth a try.
Click to expand...
Click to collapse
I'm not sure what you mean. I am pretty sure he used Odin to flash the firmware. I think you are talking about the same program he already is using.
Damn. There are so many known traps out there, yet we don't have a compile of them anywhere. I didn't know that I shouldn't uninstall Google Talk until I actually did it. We need things like this in the FAQ.
snapper.fishes said:
Damn. There are so many known traps out there, yet we don't have a compile of them anywhere. I didn't know that I shouldn't uninstall Google Talk until I actually did it. We need things like this in the FAQ.
Click to expand...
Click to collapse
"Do not uninstall google talk" is not something you need or want in an faq. It's called a frequently asked questions because they are frequent. I have never before seen someone who tried or even wanted to uninstall google talk (not to mention that this is a goggle os and removing central apps like that is bound to produce problems). And if you mess around with root like that you have only yourself to blame for not doing enough research!
Sent from my GT-I9000 using XDA App
Good idea.
Downloading now will try and post. Fingers Crossed!
OK DONOT TRY THIS!
This made things worse for me.
I lost downloader mode too now all i see is the AT&T screen showing up
Calm down and tell us exactly what you did. It sounds like the initial problems that occurred on early recovery. The download mode should still be reachable. I don't think recovery can completely brick your phone.
rumy said:
OK DONOT TRY THIS!
This made things worse for me.
I lost downloader mode too now all i see is the AT&T screen showing up
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
The problem is related to the message
Update Media please wait
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory) E:copy_dbdata_media:Can't mount SDCARD:
Your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed.
If you research this error via Google you will find several references to JP3 screwing up the permissions/structure of the internal SDCARD.
I spent several days trying to fix this issue on my phone and no matter what I did (Clockwork or no) I could not get the phone to reset/recognize the SDCARD.
As I said, my only recourse was returning the phone for a replacement. I really hope you find a fix but I think it unlikely.
I turned on my phone today to find that it mysteriously shut off...I went to turn it back on, and it just sits at the first screen forever (the one that says GT-I9000), so I pull the battery and boot into recovery. In the command line section, I get:
Code:
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
My guess is that it's some sort of a partitioning error, but I really have no clue...is this a fixable error? Also, if it makes a difference, my phone is the Canadian Bell version (GT-I9000M), purchased back in September. I've been using i9000 ROMs since I got it though, and they seem to work flawlessly (much, much better than using whatever is out there specifically for the I9000M, anyway).
Thanks in advance!
your phone is fried, just take a quick gaze upon the forums, you have a very common problem, call bell, get a 100 dollar credit and a new phone in 1 week
C.L.Android said:
I turned on my phone today to find that it mysteriously shut off...I went to turn it back on, and it just sits at the first screen forever (the one that says GT-I9000), so I pull the battery and boot into recovery. In the command line section, I get:
Code:
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
My guess is that it's some sort of a partitioning error, but I really have no clue...is this a fixable error? Also, if it makes a difference, my phone is the Canadian Bell version (GT-I9000M), purchased back in September. I've been using i9000 ROMs since I got it though, and they seem to work flawlessly (much, much better than using whatever is out there specifically for the I9000M, anyway).
Thanks in advance!
Click to expand...
Click to collapse
Try formatting your internal sd card via recovery 3e or CWM (what ever you use).
androidsl said:
Try formatting your internal sd card via recovery 3e or CWM (what ever you use).
Click to expand...
Click to collapse
When I try to format it using 3e, I get the same error message as on entering recovery move (can't mount). I've also tried several 3e factory resets and cache partition wipes, and Odin reflashes, but no luck from any of it.
Try flashing with these steps. I didn't have my internal SD die but I could not mount or format mine. Flashing with the 3 part older firmware and then upgrading to a new firmware without repartitioning has saved me several times. Let me know if it works for you.
http://forum.xda-developers.com/showthread.php?t=818556
It happened to me as well, but mine was because battery was dead.
So the obvious advise is to charge the battery completely before you do anything.
Sent from my GT-I9000 using XDA App
The battery is sufficiently charged, I'm pretty sure
After flashing to JPY through Odin, when it finishes and says pass, the screen goes blank, and then the only thing that will work is download mode (holding the power button to turn it on doesn't produce a bootloop). In the morning, I'll probably try the non-Odin method.
C.L.Android said:
The battery is sufficiently charged, I'm pretty sure
After flashing to JPY through Odin, when it finishes and says pass, the screen goes blank, and then the only thing that will work is download mode (holding the power button to turn it on doesn't produce a bootloop). In the morning, I'll probably try the non-Odin method.
Click to expand...
Click to collapse
Read the Entire First post in this thread hopfully it gets you running again.
http://forum.xda-developers.com/showthread.php?t=905975&highlight=JL2
Good Luck.
Flash using odin xxjpk than latest rom like darky v8.1
Sent from my GT-I9000 using XDA App
Did you follow the whole post I showed you? The symtoms you are describing sounds like you jumped directly to flashing jpy which will not work. You need to flash the 3 part jpu first.
They advice to flash jl2 may work as well. Jl2 has actual code changes to address sdcard issues. You may experience issues going to jpy afterwards though.
Sorry...I meant JPU, not JPY
I flashed JL2, which bootloops at the galaxy s screen (where it says GT-I9000M), and can't access recovery mode (it can access download mode though)
What should I do from here?
okay, that is fine. Now you need to flash with an older firmware, then a newer one. 3 part jpu with repartition, then jpy without repartition. If that doesn't work, you may have a dead sd. But I was bootlooping on JL2 just before I fixed mine. Here you can read this thread too where I posted fixing mine.
http://forum.xda-developers.com/showthread.php?t=892534
P.S. its supposed to not boot on the first flash (black screen). Thats why you need to flash it twice. It takes some code from the older firmware and some from the newer.
Tried, and that didn't work, so I'm assuming that my internal SD card is done; thanks for the help, though
does Samsung have an official statement on their "new phone + $100" thing I've seen around? I can't imagine that's something the store I bought my phone at will want to help me with
My friend works at Bell. He told me they are sending phones in for repair or replacement. Takes about a week. He didn't know if they are still giving out $100. He didn't think so.
Crappy about the phone. Was worth a try.....
Hi all I own an international i9000 (Hong Kong version),
My little woe started like this, I was uninstalling RyanZA's OCLF, when I encountered an error where I couldnt uninstall the ext2 tools. I read somewhere on a fix for it, where I downloaded a app called Mount /system (rw / ro) in which i set the system to RW, and then I was able to uninstall ext2 tools.
Afterwards I tried to install the Voodoo lagfix via odin.
After that, it refused to boot to the load screen (Galaxy S logo) and stayed in the i9000 screen saying restore operation then the device reboots itself.
Out of desperation I reflash my phone with my phone's 2.2 firmware "I9000ZSJPE" but that didn't work either, the first time it boots when I flash the firmware, I get taken to recovery mode, and I get this message:
update media please wait
E:Can’t mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can’t mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
No matter how many times I flash the firmware, I keep getting this message...
Is there any way to get my phone up and running again?
Thanks!
Hey, dont panic, its no biggie... this happened to me last week, you need to find a firmware that contains 'dbdata' im unsure which ones do contain it... i know darkys 9.2 Odin version definately has it... thats the rom i used to fix my phone last week.
EDIT: found this.... this should work :
This one is easy to fix so don't panic.
Download this ROM and extract (Odin 1.7 and 512.pit are included), then do as follows:
-Start Odin and load 512.pit, don't connect the phone yet.
-Make sure "Re-Partition" is checked, don't change anything else.
-Load PDA.tar.md5 as PDA, MODEM.tar.md5 as PHONE and CSC.tar.md5 as CSC.
-Put your Phone on download mode and connect it, start flashing.
When flashing is done, the phone will enter recovery mode, if it get stuck at the same error, simply do a wipe/factory reset and reboot the phone, the phone shall boot normally then.
Link: http://www.multiupload.com/PZNPALHVDW
damn, this is why we NEED XDA forums and other members! I would have hyperventilated if this happened to me! good thing there is a solution posted here
It seems my earlier reply did not send through, but I'll say it again,
Thanks a lot!!! my SGS i9000 is up and running again!!!"
Hey no probs !!! glad to hear you got it fixed nothing worse than the feeling of your beloved precious phone dying infront of your eyes, and the sweat dripping down your forehead when you try mouth to jack input resuscitation.................. or is that just me ??
haha anyways hitting the thanks button would suffice
Hello everyone,
I've been having a really bad time with my Spring GTab in the last few days... to keep it simple:
1. Had a stock GTab that was showing problems, most of the applications were crashing (force closed), but it was still usable after a reboot. On one of those reboots it did not came up any more and got stuck at the Samsung logo.
2. After researching on the forums, tried to install 2.3.3 following this procedure:
http://androidadvices.com/how-to-update-samsung-galaxy-tab-to-stable-gingerbread-2-3-3-firmware/
Odin successfully installed the ROM, got to recovery mode and tried to factory/clear cache. Showed errors... Stuck at Samsung logo again.
3. Tried to install the stock sprint EA24 following these steps:
http://forum.xda-developers.com/showthread.php?t=1009926
No matter what I do, Odin stops at recovery.bin and fails.
4. Following the suggestions there I then installed nomodem EJ30 successfully, but again got stuck at samsung logo. Tried to install the EA24 from there with no luck, still failing at recovery.bin.
So as of now, I am at the same point as at the beginning, stuck at the Samsung logo...
Guys this is driving me crazy... any help will be highly appreciated!!!!!!
Try to enter recovery and wipe everything.
aibo said:
Try to enter recovery and wipe everything.
Click to expand...
Click to collapse
Thanks for the reply, already did.... same results... something that I'm seeing in recovery is:
E:Can't mount /dev/block/mmcblk0p1
Not sure if that's the problem....
Do a little search(there's a search botton) on this forum it's a common problem, already answered if I remember correctly. Hope it helps.
aibo said:
Do a little search(there's a search botton) on this forum it's a common problem, already answered if I remember correctly. Hope it helps.
Click to expand...
Click to collapse
As I mentioned above... already did, followed the instructions of every post I found... still at samsung logo...
http://forum.xda-developers.com/sho...ght=E:Can't+mount+/dev/block/mmcblk0p1&page=2
Did you try this ? The first boot always takes a little longer, be sure to let it boot long enough.
I already answer this in other treat. Anyway, i answer it again.
"you can always go back to the right path each time you lost your way"
lol
My meaning, flash back to stock rom that originally come with your tab and see how its going on.
Sent from my GT-P1000 using XDA App
naimmkassim said:
I already answer this in other treat. Anyway, i answer it again.
"you can always go back to the right path each time you lost your way"
lol
My meaning, flash back to stock rom that originally come with your tab and see how its going on.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Hi, I tried SPH-P100.EA24.SECURE.REV07-FULL_CL871413.tar, which is the stock rom, it loaded correcty using Heimdall, but removing the modem, but it is still stuck at the samsung logo, I left it on during all the night yesterday but it did not loaded...
I am seeing the following errors in the recovery mode:
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount CACHE:log/recovery.log
E:Can't open CACHE:log/recovery.log
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
Not sure if this is the problem... what do you think?
Can I load any of these firmwares? I want to test but trying to avoid making the problem bigger...
P1000LVJJJ3
P1000LVJJM9
P1000NUBJM2
It's a Sprint Galaxy Tab.
I went to the sticky in the dev forum on how to unbrick. Ran Odin and the stock software, it goes through successfully but when I boot it will have the Sprint splash screen and then just goes to a Samsung screen and never comes off of it.
When I go to the Recovery screen, I get this message:
E: Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E: Can't mount CACHE:log/recovery.log
E: Can't open CACHE:log/recovery.log
E: Can't mount /dev/block/mmcblk0p1
(No such file or directory)
it also repeats this when I try to do a wipe on it.
I've tried putting an update.zip on the SD card and it will go about 1/4 of the way before going to the screen with the exclamation point and the Android guy.
I've tried using the EA24 flasher. When I click the Start Download button to start the software update I get an error that says "Unable to open binary file!"
any other ideas on where to go from here?
Sounds like you just need to do a factory reset / wipe in recovery (I saw the same errors and did the same when I flashed the Sprint Gingerbread ROM to my Verizon Tab). That worked for me, I'll bet it works for you too.
EDIT: Hmm, sorry I missed that you said you wiped already?
I used Heimdall to flash kernel + factoryfs.rfs in my case, that alone should be enough to be up and running I would think.
update.zip method is *very* fussy, all files are hash checked, needs stock recovery and stock kernel etc., that did work for me one time, but as I say, it's very fussy. I'd think a stock rooted ROM (like here http://forum.xda-developers.com/showthread.php?t=1161033) may be best. Worth a shot anyway.
yep, did the wipe and it pulled that message.
Tried SuperOneClick to see if I could get anywhere but no luck. Was looking through the sticky about trying to root it and run a different ROM to see if that may help but it looks like I need a working unit to do that to get into some of the settings like USB debugging and what not.
I am going to try the heimdall thing next. Hopefully I can get somewhere with that because I'm running out of options. Appreciate the info!
Make sure you use your shipped stock rom... It maybe you have locked bootloaders and it won't allow you to upgrade without unlocking 1st...
Not sure about the CDMA gtabs though as I use a GSM tab, though reflashing the supplied rom seems to fix most things...
One thing to remember if you get errors in cwm is to go to advanced, then reboot recovery. I have gotten errors just like yours and that fixed them. Also a stock heimdall will fix you. Since we don't mess around with bootloaders on the sgt you gonna be hard pressed to brick you tab. Let me know if this helps.
Personally I've given up on cwm until I see some more progress. Heimdall works well and the stock rooted gb is great for me. I've gotten into a pinch quite a few times lately and come through even gotten the phone...!...pc screen freaked me out esp when I wasn't getting odin to pick the tab up. Let me know if you need some help!
Sent from my SPH-D700 using XDA App