Hi guys,
After messing around with kernels and getting a non responding P1000, I managed to install from Samfirmware, what i believe is stock Gingerbread (Europe).
Everything looks and works fine, but I just want some reassurance that I've downloaded/installed it correctly.
My system details are:
PDA: P1000XXJQ1
PHONE: P1000XXJPZ
CSC: P1000OXAJQ1
Firmware version: 2.3.3
Baseband version: P1000XXJPZ
Kernel version: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.XXJQ1
The only reason I want reassurance is when I connect the tab to Kies, the message "this version cannot be updated" displays.
Is it the fact that this is the latest firmware, and therefore no more updates is available?
Thank you in advance and would be much appreciated and reassuring to get an answer for all you kind people.
If you have a tab that was bought throughg a specific carrier then Kies might not be able to update the firmware.
I have a GTab from Telstra in Australia and using the stock firmware I also get this message. All flashing must be done by either ODIN or HEIMDALL. CWM works so long as I don't need to restock anything....
If you do decide to change roms, make sure you check to see if the bootloaders aren't locked as some of the firmware from samfirmware were found to be resulting in problems...
Cheers...
I had exactly the same message from Kies when I tried to revert back to a stock Gingerbread rom. It seems that there isn't an official Samsung release of GB for Tab P1000 in the UK (if that's where you are) so it doesn't recognise it.
Only way I could get it to detect an official release was with a Froyo ROM.
The JQ1 was released not to Europe, but to Italy.
JibbaJoy said:
I had exactly the same message from Kies when I tried to revert back to a stock Gingerbread rom. It seems that there isn't an official Samsung release of GB for Tab P1000 in the UK (if that's where you are) so it doesn't recognise it.
Only way I could get it to detect an official release was with a Froyo ROM.
Click to expand...
Click to collapse
Yes that's right. Im in the UK. So from what i understand, only way to fully revert back and install Official gingerbread is by reverting than earlier froyo firmware and then connecting Kies thks way, then have it detect and install the newly released gingerbread?
rangercaptain said:
The JQ1 was released not to Europe, but to Italy.
Click to expand...
Click to collapse
Hi there, yeah i kinda thought the firmware i installed was the Italian release, as the date in Firmware was May, not July when the.official gingerbread was released.
Yep, that's how I understand it. However I probably will not even bother with Samsungs UK GB release as there are much better 3rd party GB options out there already. I'm running BOCA 1.5 and it is so fast - it dosn't have any Samsung apps or TouchWiz, but I haven't missed them.
JibbaJoy said:
Yep, that's how I understand it. However I probably will not even bother with Samsungs UK GB release as there are much better 3rd party GB options out there already. I'm running BOCA 1.5 and it is so fast - it dosn't have any Samsung apps or TouchWiz, but I haven't missed them.
Click to expand...
Click to collapse
Ha! Just found the XDA app, makes posting and browsing on here so much easier.
Yeah i would have thought 3rd party options would be better running as they'll omit all the bloatware that comes with the official release. I was just thinking more about the option for the future should i have any reason at all to revert back to legit stock.
There's so many recommendation on which custom Rom to install, i think I'll have to spend some time going through the forums to understand which one will be best for me.
For now, Im gonna stick with this working GB (albeit Italy release) as for now it works and I've not had any problems with doing what i want out of it.
Sent from my GT-P1000 using XDA App
The lastest gb released isn't UK, its for Orange Spain.
Related
I wanted to check if Android 2.3.* (Gingerbread) was available yet on KIES 2.0.0.11014_49.
However, KIES gives me a message that my phone can't be updated.
Yes, I rooted, hacked and cracked my phone just to get the Android 2.2 (Froyo) on it. (December 2010...)
So my phone is now labeled as having Baseband version: I9000XXJPP
Is Samsung punishing people for not waiting 9 months for an update?
Anyway, not important, how do I make sure that I can receive updates again?
Or should I not wait again.....and just follow one of the tutorials for a 2.3 update?
Thanks in advance to anyone willing to answer!
Cheers'
Read it slowly .
GINGERBREAD Android 2.3 HAS NOT BEEN RELEASED by Samsung .
Beta version is in the wild that's all for now .
jje
I didn't take your advice, so I read it real quick.
Anyway, thank you for replying!
2.2???? Man that's ancient!
They may look the same but 2.2.1 is miles ahead in terms of performance. Lagfix is a must on 2.2 but optional on .1.
So yep, don't wait again - take the 'Odin/samfirmware' path if you want official 2.3 asap when it comes out. CWM is also handy to have for custom roms (optional).
You will never want to use kies again.
Kies Registry patcher can help fake region, but odin/samfirware for ease of use, access to ALL firwares including betas and simpler to save firmwares if you ever need to reflash again quickly.
BTW: you don't need to be rooted to upgrade to stock firmware from another region, just the correct registry.
Sent from my GT-I9000 using XDA Premium App
Thanks for explaining in such detail!
This greatly helps me =)
Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Gingerbread has started rolling out and you can now update to it via Odin.
| Don't Revive Me Bro! |
Oh my God. I taught it was gingerbread already...
Sent via Galaxy Tab
I need GINGERBREAD!!
FabioMC said:
I need GINGERBREAD!!
Click to expand...
Click to collapse
Did you read the 1st reply to the OP?!
is there a way not to do a full wipe when installing gingerbread?
I heard that firmware 2.2.1 must be installed before gingerbread can be deployed. So it is probably good that you installed it.
Now if you really want gingerbread today go to the developers section and install the Overcome rom. In its thread you'll find a great guide if followed the installation is very simple.
Sent from my GT-P1000 using XDA App
MartinMu said:
Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Click to expand...
Click to collapse
Same here.
But on my Tab it still says Froyo 2.2, but the kernel is the same, as well the baseband and Build.
I was hoping for GB...
I have read and read thread after thread... after thread, and I'm confused...
Is there an actual legit Gingerbread update for the US TMo Tab that I can do through Keis or Odin, or is it an overseas version? And at that, will it pull files automatically, or do I have to DL, then install? And is that safe for the US TMo Tab?
I keep hearing about Overcome, and searched and read. Is it an actually 2.3 Gingerbread ROM, or a 2.3 theme? If it is a ROM, is it a full ROM with all working options, or more something I should wait on the official release for?
Thanks for any help, and links are appreciated.
I did searches and read a lot, but the more I read, the more unclear it became, so I thought this would clear it up for me...
There is an actual, legit Gingerbread updated that will work on a US TMobile Tab that can be installed via Odin, AND it is an overseas version (Italy release, specifically). You will have to download the files and install them. See: http://forum.xda-developers.com/showthread.php?t=1073854 . Also see here for a modem switcher, as you won't be able to get 3G using the Italy build modem: http://forum.xda-developers.com/showthread.php?t=871021
Flashing is never completely without risk, but many people have done this successfully.
Overcome is a complete firmware replacement with many modifications. The latest release is based on 2.3, but I don't really track it, so I can't really say too much more about how well it works. See here for details: http://forum.xda-developers.com/showthread.php?t=1074759
(You can also get the T-Mobile stock modem from that thread without going to the trouble of using Roto's switcher.)
The Overcome Rom is a fully functional build of Android 2.3 (Alterbridge also has a 2.2.1 Rom out there)
It has only minor minor bugs at the moment (which you likely wont even notice), but for the most part is a fully working build.
If you follow the steps written up at the bottom of Alter's Gingerbread ROM, you shouldn't have any troubles.
To answer the original question, there is no official gingerbread for any US carrier's tab, and probably won't be.
Hi, it's my tab cant upgrade to gingerbread? Even the when the official firmware available in malaysia?
Coz my fren using galaxy ace, is show diff from me
"This version of device is the latest version"
Mine
"This version of device cannot be updated"
Current firmware version: PDA:KM3 / PHONE:KM1 / CSC:KM2 (XME)
Thanks!
You have to manually flash gingerbread. It may not officially be available in your country yet, but you can still get gingerbread. Search tab development thread for gingerbread rom.
Hit thanks if i have helped.
Sent from my GT-P1000 using XDA Premium App
Thanks.
But I'm confused tat, if when my country available the firmware update, i still cant upgrade it?
I'm scared tat i cant upgrade the official firmware, cos mine still under warranty so plan to upgrade the official if can.
I get the info from some others chinese forum, some of the version cannot be upgrade to gingerbread. It's true?
The case may be that the country/region server does not yet recognize the
current firmware version (PDA:KM3 / PHONE:KM1 / CSC:KM2 (XME)) that you have. i also get that notice when i tried KM3_KM1_KM2 on my tab. i'm from the philippines and as per experience the only firmware that my kies recognizes for is the one that came with my tab when i bought it which is p1000dxjk2.
hopefully, when they "officially" roll it out for SE Asia, we will be able to update through kies. but for now i'm enjoying the stock gingerbread + CF-Root by chainfire.
Hi all,
Tesco in the UK are selling the 7 inch Galaxy Tab for £149, down from £399, so had to buy one.
I'd like to root it but not sure if it is one of the rootable Tabs.
This is the information from About Device:
Model number: GT-P1000
Firmware version: 2.3.3
Baseband version: P1000XXJPZ
Kernel version: 2.6.35.7 [email protected] #2
Build number: GINGERBREAD.XWJP9
In the Mobile network type it says HSDPA
Is this Tab rootable, and if so, which method should I use, and which files do I need to download?
Many thanks
Gaz
Hi Gaz.
I managed to get one last night from tesco too.
Just rooted it using the method on http://forum.xda-developers.com/showthread.php?t=812367
Very easy.
Now I'm on the hunt for a decent custom rom, but need to install recovery first :s lol
teffers said:
Hi Gaz.
I managed to get one last night from tesco too.
Just rooted it using the method on http://forum.xda-developers.com/showthread.php?t=812367
Very easy.
Now I'm on the hunt for a decent custom rom, but need to install recovery first :s lol
Click to expand...
Click to collapse
Thanks for the reply. Sounds like you rooted it before updating the ROM to Gingerbread in kies. You would have been running the original Froyo ROM, which I believe the method above works for. I don't think it works with Gingerbread.
I don't want to install a custom ROM, just want more control for backing up, removing bloatware, etc.
Thanks
Gaz
You're right (sorry I had missed you had Gingerbread right out of the box). I rooted the stock Froyo version, then updated to Gingerbread via the Samsung Kies updater.
Then I re-reooted using the following:
http://www.review-ninja.com/2011/08/root-samsung-galaxy-tab-7-gingerbread.html
Very simple and works for GB ;-)
Thanks for the link. Nice to know it works. If it works on yours it should work on mine; I just wasn't sure which of Chainfire's kernels to download as he lists several here on XDA and none seemed to match my Tab. I'll give it a go.
Cheers
Gaz
That worked a treat.
Thanks for your help. Always safer to check before doing this as it would be embarrassing if I'd bricked a 1 day old Tab!
Great value at £149. Thank you Tesco!
Glad you're sorted
Yeh kinda impossible to take it back for an exchange if you brick it, seems like the stock is well and truly gone now.