Hi,
So i flashed cm7.0.3 from recovery on my nexus and i got the message that flash successful and i did a reboot and i get the boot animation of CM7 and that's it, it keeps repeating, i waited for like 5 minutes but its the same, what have i done wrong?
I had gingerbread 2.3.4 before, rooted and unlocked bootloader
I formatted my sd card before, did full wipe and all
EDIT: I did full wipe twice and installed CM7, reboot phone than flashed googleapps and it worked, phew
Related
I'm stuck at the boot animation for Cyanogen Mod 6.1 RC1
What I've done so far:
rooted with universalandroot
installed clockwork mod recovery
power off
power on holding vol down
into clockwork recovery
wipe data
wipe cache
install cm6.1 - went ok
install google addon - went ok
reboot
stuck in boot animation loop
I've tried repeating the process twice now and it's just stuck in the same loop.
Starting to panic a bit and need some help!
Edit: The phone was latest stock Vodafone UK (no 2.2.1 update) if that helps
Try it again, but without gapps, and see if it will boot.
Sent from my Nexus One using XDA App
Just wipe everything inc cache/data/dalvik/stats... Always worked for me...
I tried to flash CWM10 into my Samsung Galaxy I9000 Device And here's what happened:
I got into the CWM Recovery screen and chose install from sdcard (after a wipe data + wipe cache factory ofcourse).
Everything seem to go OK, no errors or special things, but when I restarted the device to boot into Android OS, it just came back to the CWM Recovery screen.
Since then, I have tried to install many other ROMS and the phone simply won't boot to android OS.
I have also noticed that usually after a successful ROM flash, folders are created in the internal SD card a thing which DID NOT happen this time.
The only difference that the new ROMS installation does is change the CWM Recovery version/Mod.
So basically, I am stuck at CWM Recovery Screen.
I am clueless and I will really appreciate any thing you can.
Any thoughts?
MPolo1989 said:
I tried to flash CWM10 into my Samsung Galaxy I9000 Device And here's what happened:
I got into the CWM Recovery screen and chose install from sdcard (after a wipe data + wipe cache factory ofcourse).
Everything seem to go OK, no errors or special things, but when I restarted the device to boot into Android OS, it just came back to the CWM Recovery screen.
Since then, I have tried to install many other ROMS and the phone simply won't boot to android OS.
I have also noticed that usually after a successful ROM flash, folders are created in the internal SD card a thing which DID NOT happen this time.
The only difference that the new ROMS installation does is change the CWM Recovery version/Mod.
So basically, I am stuck at CWM Recovery Screen.
I am clueless and I will really appreciate any thing you can.
Any thoughts?
Click to expand...
Click to collapse
cos of new partitions u have to install 1 ROM 2x. sometimes 3x. thats all.
so take ur cm10 zip and flash it. after reboot to recovery just flash the same file again.
Hi i have the i9001, I rooted the phone earlier and all was fine, I then went to install cwm via odin using the 2 files and it flashed them and the phone rebooted back into android where it then said pass on odin even though it timed out? i tried booting into cwm and was succesful so thought nothing of it and backed up my rom and then flashed real rom.
and now my phone will only boot into cwm and thats it and after while will turn off and reboot into cwm and it will keep doing this.
I have no sd card installed. and i still have the problem when i restore the stock rom.
Any help guys as this isnt my phone?
This happened to me on my I9000 so might work. My solution was to wipe data/cache partition/dalvik again in cwm, re flash new ROM and reboot, if back into cwm then repeat. Took me 3 repeats then booted fine. Happened as I upgraded from stock GB 2.3.6 to CM10.
Sent from my GT-I9000 using xda premium
Yes that normal if you want to upgrade from GB zu JB. Because of first the change of the kernel respectivly the change to new CWM, and then for the new partitionlayout, you have to flash 2 or sometimes even 3 times the rom of your choice and then it should boot....!
I installed CM 10 stable and Semaphore Kernel. Worked great. Then went to install gapps and got lots of FC's so I went on to clean cache, dalvik and to do a factory reset and suddenly I got stuck at semaphore/boot logo and couldn't go into recovery. Got the recovery fix and installed it via Odin, and it works. But, it doesn't allow me to install anything from external SD card, only internal. Of course, I don't have anything there.
What should I do? Any links for tar versions of CWM and CM 10 for i9000?
Hmmm, is it safe to assume everything will be OK if I just flash any stock firmware from sammobile?
Yup, that combined with this did the trick.
Hi all, my name is Daniel.
I am using a motorola Milestone A853 for the past one year and never faced any issue while rooting or installing custom roms right upto cm10.
from last two months the milestone has not been working properly. It so happened i had installed CM 9.0.1d and everything worked fine. but once the battery died the phone did not boot up and was stuck on moto boot logo and kept restarting from there. I tried to go into open recovery (fufu minimod) using the X+power key and it goes into recovery but after loading recovery it did not display any options and the other text was red in color and it showed the error failed to load menu.init. I replaced the update.zip file along with the open recovery folder, but still nothing worked. I then tried another open recovery but still open recovery never loaded. Then i SBF'ed the device and went back to stock and was able to use my phone again. But then when i try to root the device again i am not able to root using vulnerable SBF as it does not install though RSDLite shows pass. Then i used superoneclick to root and that did the trick. But still open recovery never installed or load. Luckily androidiani recovery which displayed an error cannot mount but still created the menu and i was able to install custom OS but only cm 7.2.4e and not cm9 nor cm10. I cannot reboot the phone as the phone never starts up. only after clearing dalvik and wiping cache phone boots up. After a certain time now i still cannot install cm7.2.4e as it does not load and gets stuck on custom bootscreen, so i installed MIUI rom which works and starts up but i still can never reboot my phone.
Errors Seen E: cant mount /cache/recovery/command
Kindly help as the phone is just barely working.
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Tried Everything
Erovia said:
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Click to expand...
Click to collapse
Thank you for your reply. I have tried flashing stock 2.2 and still I cannot reboot the phone without wiping cache and using the reset factory option in stock recovery. Using superoneclick I can root it and install androidiani recovery but I cannot use cm10 or cm 9. after installing cm9 the phone just restarts after cm9 boot screen and after installing cm10 the phone shows the stock android boot screen. cm 7.2.4e installs as well as miui but if battery dies or if I have to restart the phone if it gets sluggish and slow then I cannot...everytime for the phone to boot I have to wipe dalvik and cache for custom roms and for stock roms I have to wipe cache and factory reset.
SO basically I am stuck...have tried changing the sd card, repartitioning the sd card, but nothing worked
Open recovery cannot be used only andoidiani works after popping up some errors.
Kindly help.