At first i'm sorry for my bad english.
So,
i wanted to flash my x8. I got a backup, and i wanted to restore the backup. But at the half of the "restore-process", my battery was empty. Now my x8 can't boot. Only the Sony Ericsson logo is on the screen. I can't get to xRecovery. What can I do? Or is my phone complete broken?
ok i got it.
i used the flashtool
now i got another problem. I flashed a new rom on my x8, but now it doesn't freeze at the sony ericsson logo, but it reboots after the logo. It doesn't boot until CM7 bootanimation. What's now the problem?
Tried a full wipe?
Did you do full wipe?
Sent from my X8 using XDA App
Try to do a full wipe (Factory reset) at xRecovery Maybe it's because you upgrade it from 2.1 / 2.2 to 2.3
Search the forums to recover you phone.Use search button.I've bricked my phone 4times.No problem
if ur phone got brick or something..just use the Sony Ericsson Update Service (SEUS) and it will be as good as new.. ^^
Hah,i bricked my phone just once.use sony ericsson update service.it will fix your phone.just root it again and install xrecovery again.
Sent from my X8 using Tapatalk
I use pc companion to repair my device and then start the root process and custom rom again. As you seem to be a little inexperienced and dont take that as an insult, i will advise not to use FIX PERMISSION in CWM Recovery, that recovery comes with a few roms now and the FIX PERMISSION option will brick your phone.
I recommend reading through the root guide twice over.
Related
I got Xperia X8 E15i with custom rom gingerDX v013. When I rebooted my phone, it gets stock on [Sony Ericsson]. I can't even go to xrecovery. Even I tried to wait for too long, no improvements happened. Please help about this! What shall I do?
Did you updated your Baseband to xxx15?
Yes! I already used my phone with gingerDX v013. I'm installing some app in the market. Then I rebooted it, get stock on [Sony Ericsson] screen. :|
Download SEUS Sony Ericsson new version
Then recover it to Normal
Hello People.
the problem, some time ago i installed froyo custom rom, somebody told me that he preffer ginger custom, and something like an hour i installed ginger,
for that i installed clockwork recovery using the x8 toolbox,
with recovery installed ginger, and it worked fine.
then i see that tool box let me install busybox, and installed busibox 1.19
that was stupid, when i reboted my xperia x8 get stuck on sony ericsson logo.
i tried using seus "there is no software for your phone"
tried something like 3,4 times...
then tried to flash with x10 flasher, to 1.6, and to 2.1.1
no one worked, really don't know what to do now :/
I have backup made from recovery, but i can't get into recovery using "back botom", or i'm doing it wrong?
lcjury said:
Hello People.
the problem, some time ago i installed froyo custom rom, somebody told me that he preffer ginger custom, and something like an hour i installed ginger,
for that i installed clockwork recovery using the x8 toolbox,
with recovery installed ginger, and it worked fine.
then i see that tool box let me install busybox, and installed busibox 1.19
that was stupid, when i reboted my xperia x8 get stuck on sony ericsson logo.
i tried using seus "there is no software for your phone"
tried something like 3,4 times...
then tried to flash with x10 flasher, to 1.6, and to 2.1.1
no one worked, really don't know what to do now :/
I have backup made from recovery, but i can't get into recovery using "back botom", or i'm doing it wrong?
Click to expand...
Click to collapse
you are doing something wrong, that's pretty clear.
First of all, define "stuck" sometimes you might have to wait for about 5 minutes...
Second, SEUS with phone closed - to install again rom, will not say- there is no software...will just flash new one over what you have...provided you have it installed in the computer with the correct drivers...
Problem that appears to be : you lost root rights by changing busybox. What you could do, was to root again...using same x8toolbox...
Hope is of some help,
Cheers,
this maybe can help....
http://forum.xda-developers.com/showthread.php?t=920746
use SEUS
click update
connect your phone while pressing back button and just follow the simple step
gud luck
Restore your phone in SEUS
Sent from my X8 using Tapatalk
DevStaffAndroid said:
Restore your phone in SEUS
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
Hi, I have the same issue.. I reinstalled busybox and rebooted my phone and it stuck on sony ericsson logo for 3 hours and counting...
can you help me how to use SEUS? I can't even go to xrecovery.. help me pls.. thanks
marcus1988 said:
Hi, I have the same issue.. I reinstalled busybox and rebooted my phone and it stuck on sony ericsson logo for 3 hours and counting...
can you help me how to use SEUS? I can't even go to xrecovery.. help me pls.. thanks
Click to expand...
Click to collapse
pls look a few posts ontop,nelikp already showed how to
Sorry I´m from German, also my english is not very good.
I have updated CM9 on my Xperia X8 with CWM. But the System hangs after the Sony Ericsson Screen. I cannot go in the CWM or Xrecovery Menu with clickin the Back-Button. Is my phone damaged now? Please reply
Thanks forward
use sony ericsson update service for repair
You Have Soft Bricked Ur Lovely X8
Yaa U have bricked ur Mobile.....!!
To Unbrick Ur X8 Download Sony Ericsson PC Companion N Ur X8 Drivers(Optional)If PC Recognized Ur Cell
Connect Ur X8 To PC Open PC Companion Open SUPPORT ZONE>Start> Then In Blue Colour Repair N Follow On Screen Instruction ONE THING Diz Will Take Back u to Ur Original Firmwire N U have to root it again...(BootLoader Will Be Unlocked Dont worry ) PRESS THANKS IF I HELPED YOU ALL THE BEST
Normally CM9 is not for our X8...As far as I know, only Paul's ICS on CM9 is available for X8..
So, did you flashed the custom kernel? (I think it works on nAa kernel...If your phone stops on the SE logo that means it still has the stock kernel, and that might be a reason for this, because installing a rom that runs on custon kernel, in a phone that still has stock kernel, you end up stuck in the SE logo screen.
If you still have stock kernel, you should unlock your bootloader, flash nAa kernel with flashtool and then try to install the rom.
(if you haven't unlocked your bootloader you should check the appropriate thread that informs about the risks of unlocking and if your phone should be unlocked or left locked).
soft brick you phone is still fine, you need to use flashtool, PC Companion or SEUS to restore stock os,
flashtool was the best solution when i had this problem last week,
from b.jay quote
http://forum.xda-developers.com/showpost.php?p=23178210&postcount=65
On the W/X8, if you power off the phone and press the Back key while connecting the phone to the Computer it will "boot" into Flash Mode. The phone actually shows nothing at this point ... you'll only see that SEUS or Flashtool are able to communicate with the device through the "SEMC Flash Device" driver that pops into place when connecting the phone in this mode.
use this firmware.Xperia X8 Stock 2.1
http://forum.xda-developers.com/showthread.php?t=1099931
Best Thanks to you guys. You saved my day. For a short moment i wanted to damage my room. I think i don´t install CM9 again and install CM7 (2.3.7). That was made no problems.
I'm stuck up with sony ericsson logo after installing the ROM CM 7.1. How to fix this issue.
Use PCC/SEUS to flash back stock ROM
Because you didn't click "full wipe" !
And u even just didnt bothered searching before posting...
omg is your s bootloader unlocked did you change kernel to nAa and post in Q/A
Actually what i did was , First i installed Ginger Dx, i can't use the phone continiously if too many apps are installed the phone get's restarted often. so i planned to change cm7.1. so i did wipe/reset data , after that i installed the CM7.1 ROM.The phone is stuck up with the sony ericsson logo screen. I heard by flash boot the image file will rectify this problem is it correct?
Mayank77 said:
Use PCC/SEUS to flash back stock ROM
Click to expand...
Click to collapse
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me
Vigneshj said:
PCC/SEUS -> is this a software or something else, how to use this. I dono what it is can you pls help me
Click to expand...
Click to collapse
PCC= Sony PC Companion.
SEUS= Sony Update service.
Download programs. They are for updating our phone (and other sony phones).
We use them for repairing (we click on update and program say "you have latest android version or something like that and "do you want to repair it" !
With thoose 2 programs we fix soft brick...!
I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...
bore1989 said:
I'm stuck at SE screen too..but I was restoring a backup of gingerdx and my led isn't working when connected to pc...Tell me this is fixable please...
Click to expand...
Click to collapse
do you mean in flash mode ??? or turn on mode ??
Guys my new xperia v is not turning on , it only show sony logo then restart :crying::crying: , all i done was installing pimp my rom and flashing some tweaks after restarting it stucked at sony logo , but luckly i have a rescue packge but i dont even now how to flash it :crying::crying: i was a samsung user so xperia is way different for me :crying: plz guyyyys help what should i do i am terrified
3elwa 7efny said:
Guys my new xperia v is not turning on , it only show sony logo then restart :crying::crying: , all i done was installing pimp my rom and flashing some tweaks after restarting it stucked at sony logo , but luckly i have a rescue packge but i dont even now how to flash it :crying::crying: i was a samsung user so xperia is way different for me :crying: plz guyyyys help what should i do i am terrified
Click to expand...
Click to collapse
I'd use Sony PC Companion to rescue your system. You will loose all data but get a factory fresh smelling phone. And the next time install a recovery before doing anything. Best advice I've got here early on by Greg.
peter-k said:
I'd use Sony PC Companion to rescue your system. You will loose all data but get a factory fresh smelling phone. And the next time install a recovery before doing anything. Best advice I've got here early on by Greg.
Click to expand...
Click to collapse
thanks for your reply but how can i do it with the pc companion and the data that i will loose would it be like wipe data / factory reset or will delete the intenal
memory data and how can i install a recovry :cyclops: and i cant understand your advice
peter-k said:
I'd use Sony PC Companion to rescue your system. You will loose all data but get a factory fresh smelling phone. And the next time install a recovery before doing anything. Best advice I've got here early on by Greg.
Click to expand...
Click to collapse
would this be useful for my phone ?! http://forum.xda-developers.com/showpost.php?p=34896000&postcount=1
Use sony update service
Sent from my LT30p using XDA Premium 4 mobile app
FaiselW said:
Use sony update service
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how buddy ?
Connect the phone -> start the Sony Companion -> click on whatever line appears there in blue under the phone name -> repair my phone -> follow the instructions.
After successful flashing go back to the forum for rooting your phone, for example http://forum.xda-developers.com/showthread.php?t=2327472 .
Then install Clockworkmod Recovery http://forum.xda-developers.com/showthread.php?t=2012738 . To my personal opinion, forget abt the factory backup software, don't bother with Titanium Backup. Use the Clockworkmod, it creates a complete mirror of everything in one. For backing up individual apps and data it's Helium (Play Store), or Android Tuner for advanced user.