Does anyone know of a stock ROM that I can download that has support for Asian languages, particularly Chinese and Japanese?
Edit: Nevermind DXJPE works
Yes, that was going to be my suggestion. Remember, JPE is gingerbread. You have to flash stock-safe gb v5, then cf-root, then jpe.
Related
Hi there,
I would like to use Odin to flash my SGS 9000 to the latest version of Froyo 2.2.1 (stock Samsung), and the latest radio firmware.
In this thread the list of firmwares are listed:
http://forum.xda-developers.com/showthread.php?t=846913
I want to use Odin to do this.
Current status of my 'phone
2e Recovery with 3 button recovery and download mode is enabled.
PDA: I9000XWJM2
PHONE: I9000XXJM1
CSC: I9000OXXJM2
Pcode: GT-I9000HKATPH
What to use
Which one of the listed firmwares can I use to get the phone up to the latest version? I think these, but am unsure:
I9000XXJPU|2.2.1|2010 December
There is a URL to a file called "All CSC Download". I think the latest file is called: CSC_I9000OXFJP6.tar.md5
Will CSC_I9000OXFJP6.tar.md5 work on my 'phone, and will it offer any improvements over I9000OXXJM2?
Regards.
im using doc rom and it is blazing fast. Doc and others provide great support if your in trouble.
http://forum.xda-developers.com/showthread.php?t=817703
Lovely, but you should start a new thread about Doc ROM. This thread is about using the latest stock Samsung 2.2.1
If you require advertising space for doc rom then might I suggest Google Adsense?
Doc's ROM = Froyo 2.2.1 (without most of the bugs stock has)
Please read the android development section. It's not nice to just wait and be spoon fed all the info if the info is just a few clicks away..
Sent from my GT-I9000 using XDA App
Apologies about the doc rom message I wrote. I had misinterpreted it.
I wont flash non stock firmware. I only want to flash the latest Samsung including CSC.
The reason is simply lack of information about what everything does. All the threads tell me to do step A then step B, but seldom explain what & why. Thus I am unable trust what is said, & will therefore only use the official Samsung.
/EDIT:
I have searched for Doc Rom on the web, so far only found this site:
http://www.galaxyroot.com/howtorom-a-noobs-guide-to-installing-docrom-xxjpu-v1-1-with/
I was looking for a list of the following for Doc Rom:
Changelog, indicating reasons for the change from stock Samsung.
Diffs between files of the code changes made.
Release notes.
Does anyone know where I can find these?
Samsung XXJPU is a leaked firmware.Samsung didn't release the source code for it.
Sent from my GT-I9000 using XDA App
Oh. Perhaps Android is psuedo open source.
is this the same for the CSC I9000OXFJP6? ( Although I don't know if this would work with my 'phone so my question may be moot)
If you are that distrusting and need to know exactly what and why things are changed , you will never be able to flash any firmware again .. You willnot find a byte per byte explanation .. And because you do not trust rommod you can also not trust leaked roms !! Who knows , maybe somebody changed somtheing in the leaked firmware .. The only right thing for you to do is wait for a rom update via kies ! But ..... be warned Samsung also doesn't deliver a changelog !!
After searching google I've read a few fairly recent articles that say installing 2.3 on a Bell I9000M is possible and they all give a broken link to the forums here. I've checked samfirmware and the only JVK (2.3) firmware they have there is Europe. I'm very computer literate but fairly new to firmware upgrades / messing around with my phone so I'm just wondering would I be able to install European 2.3 firmware of my Canadian I9000M from Bell? Or is there a special release of it that I need to get? I've poked around here a bit but couldn't find the answer I was looking for. The firmware I'm talking about is the I9000XXJVK release. Thanks in advance, didn't think I could have this much fun with my phone.
Been curious myself had nightmares with the last upgrade... Three sgs's from bell. They didn't like that but i was within the 30 days doa clause.
Sent from my GT-I9000M using XDA Premium App
Mauro87 said:
After searching google I've read a few fairly recent articles that say installing 2.3 on a Bell I9000M is possible and they all give a broken link to the forums here. I've checked samfirmware and the only JVK (2.3) firmware they have there is Europe. I'm very computer literate but fairly new to firmware upgrades / messing around with my phone so I'm just wondering would I be able to install European 2.3 firmware of my Canadian I9000M from Bell? Or is there a special release of it that I need to get? I've poked around here a bit but couldn't find the answer I was looking for. The firmware I'm talking about is the I9000XXJVK release. Thanks in advance, didn't think I could have this much fun with my phone.
Click to expand...
Click to collapse
Pretty much any of the stock or custom JVK or 2.2 Roms will run on your Bell Vibrant. I've used Darrky's, Doc's, Ultimate and Serendipity with no problems. Most of the current modems work fine on Bell, although I try to stick with a JL2 modem if I can. It seems to get slightly better signal. Use Doc's Rom Kitchen and you can pick and choose your options including the JL2 modem.
The Kitchen -http://www.romkitchen.org.
More info - http://forum.xda-developers.com/showthread.php?t=817703
Stock JVK - http://forum.xda-developers.com/showthread.php?t=1011901
Done and done!. If anyone else is curious head on over to samfirmware and grab the European I9000XXJVK release, working for me atm. About to apply root from the last thread jentech posted. Thanks jen!
JVK upgrades the bootloaders though right? If you install the version without the bootloaders, you will get into a bootloop right? The bootloaders in JL2 is what is preventing the i9000m from getting corrupt SD failures from what I understand. I would really like to know if updating the bootloaders with JVK will open our phones to the corrupt SD thing again. I would love to hear some feedback from i9000m users who have gone to JVK. Like how long they've been running, and especially if there are any i9000m users who have upgraded to JVK and got corrupt SD. I'm not excited of going through yet another i9000m. Thanks!
I would love to know the answer to this question as well!
ive been using criskelo's 2.3.3 rom with no problems... all you have to do is flash stock jvk with bootloaders from odin and then flash a speed mod froyo kernal
after goto cwm and flash the criskelo v25 rom and then get the ugkc1 modem
from criskelo's rom page (page 40 i think cwm 3 compatible)... and flash the rom in cwm and everything willl run awsome... the rom is unreal ive had no problems at all on my i9000m (remember to enable all animations in settings to get the crt screen off effect... runs way smother and faster then froyo....
I too have been running on jvk for the past week+. I've alternated between criskelo and juwe's and am currently on juwe's for the past week with no problems. I changed my modem from the jvk one (poor reception) to the jk4 and it runs as normal. give both criskelo and juwe a try to see which u like better (personally the smoothness and battery life of juwe has won me over) as neither has caused any problems at all once u follow the appropriate steps like those that remenis outlined.
**typing this post took waaaaay longer than it should have...was a good drunken night anyway**
hello guys ..
i flashed yesterday gingerbread and its work great but no 3g cuz its different firmware thought so
my tab is p1000 asia ( malaysia )
i flashed the beta 2.0.0 gingerbread today from overcome and the 3g its work
but i back to the stock gingerbread till it get furnished by overcome developer
i thought that overcome don't use modem so i delete the modem and make my own TAR and flashed the stock back, but no 3g appears
any idea to make the 3g works on my tab ?
Flash you approptiate modem.bin
Hit thanks if i have helped
Sent from my GT-P1000 using XDA Premium App
ssserpentine said:
Flash you approptiate modem.bin
Hit thanks if i have helped
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
from where i get it ?
you stated on your initial post that you reflashed to stock after trying out 2.3 overcome. the stock firmware rom should have the modem.bin. if not oyu would need to redownload the stock firmware.
as stated by alterbridge86, he didn't include modem.bin with Overcome ROM v2.0.0 BETA 1 - "No Modem is included - due to a variety of personal preference I decided to leave that a la carte "
also, you could check this list of modems for the tab. http://forum.xda-developers.com/showthread.php?t=1069727
noxxious said:
you stated on your initial post that you reflashed to stock after trying out 2.3 overcome. the stock firmware rom should have the modem.bin. if not oyu would need to redownload the stock firmware.
as stated by alterbridge86, he didn't include modem.bin with Overcome ROM v2.0.0 BETA 1 - "No Modem is included - due to a variety of personal preference I decided to leave that a la carte "
also, you could check this list of modems for the tab. http://forum.xda-developers.com/showthread.php?t=1069727
Click to expand...
Click to collapse
the modem is not for asian , thats why i need the modem for asia ..
overcome got no modem and the 3g works , thats why , i make my owh TAR without putting the modem inside and flash it to see if its work , but didn't work i need asian modem
you could try the hkc1 modem from the DarkPal's thread. that's from the asian 2.2.1 rom. if you want i have the km2 modem.bin i could share it with you.
noxxious said:
you could try the hkc1 modem from the DarkPal's thread. that's from the asian 2.2.1 rom. if you want i have the km2 modem.bin i could share it with you.
Click to expand...
Click to collapse
thank u dude .. i re=flash overcome 2.0beta ..
tnx
here's the modem i'm using. its from p1000dxkm3.
hi, i'm from m'sia. im using samsung gt p1000 but it seen like there is a prob. for me to install the KIES what shall i do ? can i know how to upgrade my tablet to gingerbread version ? thanks for the help ^^
noxxious, i can straight away download ur zip file to my galaxy tab ? but it doesnt make any diff. on my phone....how ??
You could upgrade your tab to gingerbread with either overcome gingerbread by alterbridge86 http://forum.xda-developers.com/showthread.php?t=1074759
or http://forum.xda-developers.com/showthread.php?t=1073854
Also you have to unzip the modem file i attached before using with odin.
Can I put your modem in my thread? Credit will be given.
Sure darkpal.
i want to upgrade my cellphone GT-I9000T but didnt found any direct link for 2.3.4 STOCK, if anyone have will be appreciate it
hi,first which country u living(using your phone ) if u live in eu so here is the link for latest stock 2.3.4 flashable frimware from samfirmware.com ! u gonna need to use odin or heimdall to order to flash but u already know it )
link : http://hotfile.com/dl/120782210/8ac6b60/XXJVP.rar.html
im living in panama (central america) but i got told that 2.3.4 is working 100% with i9000t i only had to use the modem jv6 from here:
http://forum.xda-developers.com/showthread.php?t=1103677
is that true?
yesss actually if u use 2.3.4 with correct modem so its wirking without any issue! try miui rom ! its based on 2.3.4 cm7 and its just reallly goood rom!
I recently sent my I9000m back to bell because it was playing up after a firmware update from Kies.. They said that they had to replace a major componant. I have got my phone back but now i have:
Firmware 2.2 I9000UGKCL Froyo.. It wont let me update the phones firmware anymore.. i want to flash my device using Odin.. any suggestions on what firmware to use??
Have u used Odin ? And what do you wish to flash ?
bigmadpete said:
Have u used Odin ? And what do you wish to flash ?
Click to expand...
Click to collapse
I want to use odin.. I just need suggestions on what would be best firmware to use. i would like the 2.3 Update
How about GingerBread 2.3.4. Here
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
Hope it helps
I9000m said:
I want to use odin.. I just need suggestions on what would be best firmware to use. i would like the 2.3 Update
Click to expand...
Click to collapse
The "best" firmware to use will depend on what type of firmware you want:
- If you want a firmware specifically meant for Bell i9000m phones, it would be the UGKG3 firmware. It is the only Gingerbread firmware released so far for us Canadians. It runs Gingerbread 2.3.3, but be aware that there are no custom kernels for it yet. There is only a rooted stock kernel available. See here:
http://forum.xda-developers.com/showthread.php?t=1211939
- If you want a firmware that was meant for the international i9000 model, there are many many roms that you can try. There are roms which are stock (like XXJVQ/XXJVR 2.3.4), roms which are modded from those stock roms (like Juwe's, Insanity, Darky's, etc.), and completely rebuilt custom roms (like CM7/MIUI 2.3.5). There are lots and lots to choose from.