Related
i will try to be as detailed as possible. im coming from the kaiser community so go easy on me
when i had recieved the phone it would turn on go past the tmobile g1 screen and go into the recovery console. the console read. JF 1.41.
after reading around the best option i got was reverting everything back to factory settings.....and so i did. i installed the factory spl went back to rc29....then updated to rc 30 and installed the new cupcake.
everything was fine except for i couldnt get the phone activated given im an AT&T user.
this morning i finally recieved the unlock code from tmobile and when i turn the phone on with the att simcard, it gave me the triangle with the exclamation screen.
so i hit alt +l then alt w and after a reboot it would bring me back to the same screen. Also this recovery screen is diff from the jf 1.41 (im guessing this is the factory console).
now im out of ideas as to how to get this phone back in order. i would love flashing the DREAIMG.NBH but sadly my phone refuses to go in bootloader.
ive been trying to hold camera+ power and its jsut loads up the tmobile g1 screen.
any and all advice/helps are appreciated.
-thank you
so this is totally weird. i leave the phone unplugged with the battery out for about 3 hours. came back to work on it....turned it on and well it loaded and got me to the home screen ( no sim card ).
so i powered off the phone and inserted the AT&T simcard turn it on and it shows me the same screen again with the triangle and exclamation point.
how do u explain that ?!
pressed power for 3 seconds and then let go and held down the back key. it flashed the bootloader tricolor screen and then said ""everything will be reset to factory defaults .press send to reset"" and when i did that there was no change........nothing happened. ended up pulling the battery out..
Same problem..
I have very similar problem.. but mine takes much more than 3 hrs to come back.. and even then , the task manger keeps popping up from time to time in the home screen ,, so i guessed my home button was stuck or something...
After i found your "problem Sovled" post in another theread on 11th oct ..i thought i better take your suggestion before taking phone apart..
I was on 1.5 version and 2.22.19.26I radio. also i do not know whether i'm in RC29,30,33 ..
i'm really confused about all this radio,firmware ,recovery things....
Please Guide me ..
well first you need to get in your ph to find out if u have rc29. if you are able to get to home screen just hit menu - setting - about phone - all the way down it'll tell you what you are running.
i followed this guide to help me flash it to the cyanogenmod rom
http://forum.xda-developers.com/showthread.php?t=563679
hopefully it helps. but if you are able to get into bootloader unlike me then jsut flash the rc29 hopefully it will solve your problem.
my home key acted like it was stuck but now everything is working fine.
Thanks for Replying so quickly ..
I managed to go to the bootloader screen(tricolor) ..actually it went without even pressing the camera button(any idea why??) after leaving the phone without battery for about 5 hours.. and i flashed the Dreaimg-RC29 file .
Since then i'm Stuck in recovery mode again.. but this time the recovery utility is different (yellow letters)..i.e hopefully RC29 is succefully installed.
I wanted to complete doing your suggested guide before asking any more questions, but now i unable to so what shud i do now?
IS the task manger popping up involuntarily sometimes for you in the cM builds?
Can it be that you had a hardware button issue, which somehow rectified itself when going to Cyanogen..
I really appreciate your taking time to answer my questions ..
well sounds like jsut what had happened to me.
make sure you have tmobile simcard on you with a dataplan.
you're going to have to leave your phone off without the battery or just turned off for a while. from here on out it was trial and error. i kept trying to turn the phone on hoping it would go past the recovery screen once it did i activated the phone and finally completed the root process.
as for the cyanogen mod rom i think you are right. though on my initial flash i had a bunch of force closing apps but it all fixed itself upon a restart. ever since then i haven't seen the recovery mode every time i boot it.
PS: that reocvery mode that you see is the stock recovery meaning yes u have flashed RC29 sucessfully.
so i jsut flashed to CM 4.2.3.1. and well im back to square one. im booting into the recovery by default. obviously confirming my doubts about the hardware problem.
im going to try and leave the phone off for a while and see if i can get it to load up. usually that solves my problem.
Oh..
Thats depressing.. Anyways... Lets do it together then I have kept my phone unsed for about 16hrs now.. hope it works ..
Have you tried the HTC Diagonistic program for g1 (DREADIAG.nbh) ?.. I am yet to try it out as i cannot go to the bootloader..
http://www.megaupload.com/?d=7NRX7H40
which version of cyanogen were you using before this happened?
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
mtkhalid said:
i have not tried diagnostic. iw as going to use ADB to push the recovery on there but it went into bootloader.
i was using cyanogenmod rom 4.1.9999. now i have updated to 4.2.3.1.
actually iw as working on it last night. i re did that whole guide except for downloaded the new rom and flashed it.
so as of now once again that hardware flaw is gone and the phone is working fine.
Click to expand...
Click to collapse
Did you update from 4.1.9999 straight into 4.2.3.1? If so, that's the problem (maybe).. I suggest you install the HTC 1.6 ADP Rom (link in the cyanogen 4.2.3.1 post) then upgrade to 4.2.3.1. Make sure everything is updated.... rom, recovery & spl (before you upgrade SPL make sure you have the most recent radio version first! or you'll brick the phone). then give it a try and see what happens...
you are right. the first time i just flashed the new rom. the second time around i followed the guide except for i flashed the latest cyanogen rom.
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Still waiting for your answer
SaiSantoshD said:
I'm not able to make it go to the home screen even after so many attempts..
i could only manage to go to the bootloader screen once and flashed the RC29 and i'm stuck there
Can you elaborate on how you got to the Home screen , like how long you keep it off or press which buttons to start ?
I'm not in the US , and have bought this phone from Ebay (new, never used) from a seller with good feedback for G1 (wanted this phone very badly). I was using the phone for barely 3 days when i did a factory reset from the phone and this problem started occurring .
IS there anything else i can do..?
Thanks for Helping..
Click to expand...
Click to collapse
how did you flash the RC29? after pressing the power button
did it give you any errors? once its flashed, reboot by pressing home and back (or w/e the SPL tells you to)
it should boot into the rom
Home button problem (repaired/solved)
Firstly, thanks for responding ..
I had flashed RC29 when it had gone to the tricolor bootloader screen on its own
but after that it would not go anywhere other than recovery(exclamantion mark)
Now good news
4 hours back i opened the phone again(third time) , and took a safety pin and started scraping(gently) the non shiny parts of the connector ( daughter board to main board) .
I think it was previously shorted near that area , so by scraping removed the shorted metal joints .. and now the phone booted up to RC29 (just like that) and i even installed the cyanogen mod ..
Many thanks to u all .. hope this Comes UP in google search for people with similar problems(and there are many)...
KEYwords: Home button stuck on recovery no booting
Ah wow didnt think of that lol.. glad to see you got it to work
Hi,
Unfortunatelly I started playing with my I9000 without reading enough and bricked my phone completely (?). If anyone can help please do so.
Description:
1. I tried to flash with Odin new firmware but after flasing and rebooting got message "unable to update media ...." (or something like that) When powering on I got only welcoem screen with phone name
2. I wanted to repeat flashing but Odin could not start reflashing (I still could go into Download mode)
3. I found at xda forum [STOCK ROM] Odin3 One-Click Downloader,
but I didn't notice that it was for Captivate (I thought it is just another name for I9000,now I don't know why)
4. I reflashed my i9000 and after reflashing got only At&t screen turning on and off, without possibility to enter into download mode.
Actually I'm stuck with this situation I feel really stupid, but by mistake I did what I did.
Is there any chance to help ?
Thanx in advance.
according to some users, you might get lucky, and might be able to recover
let your phone stay on on that loop, wait until it turns itself off
then try the 3 button combo again
if all else fail, contact samsung tech support, which will simply send you back to your cell phone place
I'll try but I'm not very optimistic
Waiting doesn't help - I tiried all possible 3 or 2 button configurations unsuccesfully.
Anyone has any other idea if antyhing can be done with the issue ?
The exact same thing happened to me. There is nothing you can do except to bring it back to Samsung. I brought mine back and they have to replace the whole motherboard
what did you tell them? is it going to cost you?
diehard2222 said:
what did you tell them? is it going to cost you?
Click to expand...
Click to collapse
I told them my phone cannot boot. Can they help to reflash the FW and see if it helps. They did and said phone still cannot boot after reflashing. Hence they have to change the motherboard. I asked and they say it's under warranty...
The shop where I had bought my I9000 sent it to Samsung - I will see what they do with it.
I have flashed a vibrant with a i9000S software but the radio did not work quite well. Since the two have different keys, now i cant get it to boot mode. i was able to get into recovery mode via ADB but all i can do is use vol to go up or down and not select an option. the device wont even get out of recovery mode.
Any help will be greatly appreciated.
Same
I did the exact same thing and couldnt get it to go past the AT&T logo i took mine to the samsung authorised repair centre and after 3 days and 49 dollars they fixed it. I dont know how they did it because i couldnt get USB to reconginise or download mode or anything just stuck on white screen but they managed to get it up and running.
So even though it cost 49 dollars to fix it via software method it is better then spending 800 on a new phone or 300 for a new chip which they originaly qouted me. So there is hope with proffessional services
now, the magic usb plug is avaliable in ebay, it can turn your bricked phone into download mode in a few seconds. really good!!!
Hehe... ...the magic is one usb connector an 301 kohm resistor
Br:25011
h***://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
Hey guys, hopefully someone is able to help . I recently soft brick my friends phone without realizing that Samsung have changed the build number on this phone. This is also a nice warning for those of you who are about to use odin to flash.
Build #11.02 number found under battery Rogers Phone.
Flashed with odin using pit and tar file = fail. Reason for flashing was to get it to Rogers stock 2.1.
3 button is not working, I get the phone and computer screen.
I have try the Jig and it also put the phone into download mode. I get the phone and computer screen instead. The Jig however does work on my phone build #10.12 also a rogers phone.
What I may think Samsung may have done was change the jig setting and I have no clue on which pin to touch without frying the phone (if what is possible?).
If anyone with more experience or could shed some insight on how I can go about fixing this problem please do not hesitate to leave a comment.
Thank You
Bui.
which stock did you use? the one in my sig?
also the 11.02 phone, did it come with 2.2? i have talked with 1 IN-experienced user that had a 2.2 phone that would not boot with 2.1. they had to flash 2.1 then the 2.2 overtop to get it to work, but once again it was a noob and may have been another issue.
ok to try to get back to download mode:
take out battery
plug in usb
hold both vol buttons
put in battery
flash again, odin sometimes fails without reason but will work another time...
I did not use the one you posted and it did come with 2.2. I used the one that worked for my phone build #10.12 which did not worked. I was also assuming he had the same build as I. After I realized that and try using the Jig and notice all fail also. Not sure what is up at the moment.
I have try all the download mode that is possible on the forums to get my phone into download all has fail. I still get the phone --- ! --- computer symbol.
I also try using the Jig I build on pin 4 and 5 and still nothing. The total resister is 301k ohms if anyone has simular problem and manage to get their phone into download mode please post your result as many other may also have simular problem.
Thank you
Bui.
Solution
Hey,
I have the same 11.02 build number Rogers Captivate and would like to try a custom rom but I'm holding off until I know it can be recovered should a problem come up.
Have you found a solution to this problem yet?
Hi all,
Wondering if anyone could help me. On the Samsung ATIV Odyssey I have, when it boots, it will show, Windows Phone, Samsung screen then just shows the spinning gears..this will go on forever. I tried to reset and "tried" to hard reset it but could never get the "!" To show up.
Is there any way possible to recover this phone or am I stuck having to send it out to Samsung?
I have not been able to get anywhere with this phone and can't find recovery software like Nokia has for their phones for Samsung models....
Thanks in advance!!
Can anyone help with this issue ?
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
DavidinCT said:
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
Click to expand...
Click to collapse
If 'someplace in CT' means 'quacche patte a Catania vicinu a fera o luni' we live in a similar place
Anyway you can get informed better here:
http://forum.xda-developers.com/showthread.php?t=2692049
Take a Flash tool. more infos here(the procedure should be the same for the odissey)
http://forum.xda-developers.com/showthread.php?t=2391138
You can try to flash the fake wolfROM with the customwolfROM.csc(or mbn, I don't remember) for Odissey (You'll find it in the first thread i've linked you)
OF COURSE FOLLOW THE GUIDE NOT TO BRICK MORE YOU DEVICE.
If you have any problems you can ask.
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
DavidinCT said:
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
Click to expand...
Click to collapse
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
gidannifico said:
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
Click to expand...
Click to collapse
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
DavidinCT said:
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
Click to expand...
Click to collapse
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
gidannifico said:
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
Click to expand...
Click to collapse
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
DavidinCT said:
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
Click to expand...
Click to collapse
You're welcome
When the phone will be perfectly working you 'll be able to interop it with wolf's custom csc (the thread I've linked to you)
Cheers
BTW, I have the custom rom for the Odyssey, its definitely got some odd bugs.
Verizon stores can reflash it for you too for free, just need to hit up a Verizon CORPORATE store. Apparently they have the tools and the ROM, instead of waiting for it to be mailed and come back.
Well I used the wolf custom rom and follow the exactly instructions but my phone now say is corrupted, and instead of boat show me a message telling me that!
So, I got another one and now has the same problem, so, somebady knows if there is at day an original rom available?
Still no public Odyssey ROM yet.
I have a SM-N910F Note 4 device and I have been out of the loop for a long time. In fact, I was scammed getting this device as I was told it was a SM-N910T and.... well... I am stuck with this and need to make the best of it. What is a good radio, rom, kernel, etc that I can use to get t-mobile wifi calling on this device?
Also, I reset the defaults on the phone and I now have all 11111111111s for the IMEI so it won't register on the network. It worked before I reset the defaults. I held the volume button down on boot up and the writing is all in Chinese so I don't know how to modify the IMEI so I can use it.
Any suggestions to either issue are helpful. When I was in the loop, I was a strong follower of AOKP and Cyanogen as they felt full featured but true to the source of the ROM and kept it updated. I don't know if these ROMs support T-Mobile WiFi calling or if there is a better, stable, somewhat frequently updated ROM that I should consider now. A simple ported T-Mobile Rom with 4.4+ or 5.0+ is fine. I don't care as long as it's stable and fairly reputable.
Thanks for any help on saving me from a complete loss on this phone, if it just won't work, I will put it up for sale to hopefully recoup some of my lost money back. I can't believe how stupid I was. The box even says 32GB but it has 16GB inside... these guys are good now adays. A hard lesson learned.
Any thoughts on this? Even if I am screwed because of the Chinese writing on the bootload, I would lice to know. I can't get the OS to see the device nor Odin and I downloaded the Samsung Note4 USB drivers.
If I use the up volume+power I get an open android lying down with a red triangle with an ! mark and the message "No Command" under it.... sigh, am I screwed?
You're probably screwed on the IMEI unless you have a nandroid backup. You should download Kies 3 to see if you can use that to flash it. Best of luck.
Hey, thanks rco, I did find that when I pressed the up vol on boot that I could press the power button at the Android laying down open screen and it would give me a Rom manager. It says something like
Android system manager <3e>
And then all the other things like applying from anumber sd card or abd flash, etc. No option to connect to the computer so I can attempt to install Odin and I can't find Odin zipped up In a rom manager installer.
So I tried to install cm 12.x nightly from t0tletmo and got some scatter failure.
Thanks again and to anyone else that has any thoughts to add.
Why is it so difficult to put T-Mobile's WiFi calling app on non-T-mobile devices? The hardware is the same. Is T-Mobile's software hard-coded in the stock T-Mo firmware?
i'm just curious to know if you can use wifi calling overseas in airplane mode for t-mo customers lol
Yes you can, that's one of the reasons why I purchased the T-Mobile variant.
masri1987 said:
i'm just curious to know if you can use wifi calling overseas in airplane mode for t-mo customers lol
Click to expand...
Click to collapse
pappadj said:
Hey, thanks rco, I did find that when I pressed the up vol on boot that I could press the power button at the Android laying down open screen and it would give me a Rom manager. It says something like
Android system manager <3e>
And then all the other things like applying from anumber sd card or abd flash, etc. No option to connect to the computer so I can attempt to install Odin and I can't find Odin zipped up In a rom manager installer.
So I tried to install cm 12.x nightly from t0tletmo and got some scatter failure.
Thanks again and to anyone else that has any thoughts to add.
Click to expand...
Click to collapse
Edit - I just checked and that actually shows on the stock Note 4 recovery. I thought they had changed it.
You dont even have a N910F, I think you have a chinese knockoff. I believe that when you see the "Android System Manager <3e>" is the stock Android AOSP recovery and not the T-Mobile one.
When you hold the volume down and Power and Home are you presented with a screen with 2 options?
Post up some pics for us