[Q] SD card disappeared in GingerDX v004 - XPERIA X8 Q&A, Help & Troubleshooting

Hello everyone!
This might be a noob question, but I just couldn't find the solution to it. I recently got my hands on an Xperia X8, upgraded to 2.1 stock. After a week or so i stumbled upon this website and discovered all the custom ROM goodies. So yesterday I had some time to dive into the ocean of custom ROMs.
I rooted my phone, got xrecovery up and running, made a backup of my stock 2.1 and then installed GingerDX v004. I have to say it worked like a charm... until i found out that GingerDX says that there's no SD card in the device.
The odd thing is that xrecovery and the backup 2.1 system all see the SD card properly. In GingerDX's Storage menu all the SD card stuff is greyed out except Erase all data which doesn't work. Tapping it says all data erased, but when I hook it up with my computer, everything is there on the card.
I've tried the following without any improvement:
1. Restoring old 2.1 system - reads the SD card correctly
2. Full wipe, battery wipe, reinstalling GingerDX - no change
3. Formatting the SD card, putting it back in - no change
4. Rebooting GingerDX without SD card and putting it in while the system is up - no change
5. Rebooting with SD card, taking out the card while the system is on - no change - except for the fact that it states "SD card removed" in the notification bar. If I reinsert the card, the "SD card removed" message does not disappear, so basically nothing happens.
So could anyone give me an advice on what to do next? I'd like to take my chances before going out and buying a new card ...
Thank you in advance!

Maybe it's a bug in v004. Try installing v005. It's up now.

Chris95X8 said:
Maybe it's a bug in v004. Try installing v005. It's up now.
Click to expand...
Click to collapse
Thanks for the advice, but it doesn't work. Not even v005 sees my SD card

Maybe your card is corrupted.

Chris95X8 said:
Maybe your card is corrupted.
Click to expand...
Click to collapse
That may be, although I find it strange that it works with my card reader (PC) and 2.1 also recognizes it. I'll try another custom ROM (FroyoBread maybe) and another card.
Until then I thank every bit of advice!
EDIT:
I've found another person with the exact same problem, which leads me to believe the problem is related to GingerDX
EDIT#2
I've just installed FroyoBread v23b and it handles my SD card like a charm. So the problem is related to GingerDX. I hope it doixanh manages to fix it soon.

SD card issue solved!
After many tries I've been able to solve my SD card mystery.
Looking back the solution is quite simple, it appears that Gingerbread doesn't like an SD card below Class 4. My card was Class 2.
So I went out and grabbed a Class 10 SD card and voila it works.

Neurophobia said:
Looking back the solution is quite simple, it appears that Gingerbread doesn't like an SD card below Class 4...
Click to expand...
Click to collapse
i guess its 4 and below, i have a 4gb c4 card and have the same problem... now i'm off to buy a new card...

Make a ext3 partition

SD Card
Had the same problem with GDX. Went back to Froyobread, and now it's MiniCM7, working like a charm. Maybe is GDX and SD Card class...

Maybe it's a bug (or feature) with sdhc cards that requires a certain speed to work. The stock 2GB sd card that came with the phone works fine..
Sent from my E15i using XDA App

I'm sorry to dig up an old thread, but i've EXACTLY the same problem.
The included 2 gigabyte sdcard and a sandisk class 4 8gb works, however my 4gig card isn't recognized properly (in v0017 my 2gig card isn't recognized too)
Tried every Gingerdx build, and LinuxDX v004 with the new sd card compatibility fix doesn't help.
I looked up with Logcat and it seems that the sdcard goes from "No media" -> "Pending" - and then it suddenly stops, no "idle-Unmounted", no "Checking" and no "Mounted".
The Recovery-systems (both, cwm 3 & 5) of the FXP Kernel has the same Problem, even the included sdcard aren't properly mounted (i can view files, but after i select one it says "Can't mount [Path]" and then the sdcard unmounted, or it is always ).
I have two X8s and the 4gig sdcard doesn't work on both with gingerdx 17, or fxp recovery.
But it looks like it's not gingerbread or CM7 related. Minicm2.0.7 works fine.

Maybe you had china no-name card. I've that and I've the same problem in gingerdx, ginger crutz and gingerxperia v10 (in v9 it's working fine) and CWM 4.0.1.5 recovery.

I have a same problem, 16G > 10Class sdcard(China), MiniCM7 work fine.

I'm sorry i'm having the same problem as well but my sd card is not chinese, are you sure this problem is due to SD card origin??? also where can you know which class your sd card is?

[SOLVED] SD card disappeared in GingerDX
I'm new here and english is not my mother tongue so forgive my errors...
I had the same problem and I had to uninstall GingerDx because without my SD-Card my whole life was a lie...
So... I installed the 023b (I think it's called like this, but I don't know) and I had the same f***ing problem...
What I did:
FIRST OF ALL!!! DO A BACKUP OF THE SD FILES ON YOUR COMPUTER!!!!
-Reboot phone in ClockworkMod
-mounts and storage
-format /sdcard
(BACK)
-Advanced
-Partition SD card
-ext4
-1024MB (1GB LOL)
-IDK but I pressed 256M [maybe you should leave a comment about wich size is better (0, 32, 64, 128 or 256)]
-wipe data/factory reset (try first to skip this)
-reboot system now
When you set up the phone it will say to format the SD. Accept and that's it!!
It's working!! (for the moment)
Thanks! If I said something wrong or you can help more with that problem comment please!!!
(Ai apologise four mai bad englix)

Related

[Q] No SD card access [CM7]

Hey guys,
I just lately updated my CM7 from an older revision of it, (I think the thread for development was removed? I couldn't find it again) and installed the latest galaxysmtd (whats an mtd?) package on my phone. Prior to that, anyhow, I had an SD card issue.
- The 'SD Card' of the phone was unavailable (total and current usage)
Internal SD card was almost full (shouldnt be, but whatever)
My external worked fine.
Now, I removed my external (I didnt want it to get accidentally formatted etc) and I formatted my entire phone, wiped everything etc., and restarted and now both my Internal SD Card, 'SD Card' and External SD Card (external should be like this because its not in anymore) are unavailable. My phone pretty much just said I have 0 memory.
How can I fix my SD Cards ...?
NargalaX said:
Hey guys,
I just lately updated my CM7 from an older revision of it, (I think the thread for development was removed? I couldn't find it again) and installed the latest galaxysmtd (whats an mtd?) package on my phone. Prior to that, anyhow, I had an SD card issue.
- The 'SD Card' of the phone was unavailable (total and current usage)
Internal SD card was almost full (shouldnt be, but whatever)
My external worked fine.
Now, I removed my external (I didnt want it to get accidentally formatted etc) and I formatted my entire phone, wiped everything etc., and restarted and now both my Internal SD Card, 'SD Card' and External SD Card (external should be like this because its not in anymore) are unavailable. My phone pretty much just said I have 0 memory.
How can I fix my SD Cards ...?
Click to expand...
Click to collapse
First, as to your opening questions....Brother, if you are asking what MTD is the you have a LOT of reading to do. GO to the CM7 Dev thread and get started.
As to the SD card issue...you FORMATTED the SD card, that is erased it fully? That may help explain why it is unavailable.
What firmware are you running at the moment?
Haha, I would assume so.
My SD card(s) were not working previous to the format nor prior.
My phone is the Bell Vibrant I9000M
I'm using the CM7 06132011 Nightly (Todays)
and my kernel is 2.6.35.7-g2eb7780 [email protected] #1 (if that helps .. )
:\
EDIT::
So.. I google'd MTD etc., lol and MTD is a seperate partition?
Maybe thats why my SD Card isnt working.. its not on the right partition in the first place?
-> was looking here.

[Q] SD card safely to remove after upgrade to gingerbread

Hi, all..
I have an xperia X8.
after i upgraded it to s-rom gingerbread 2.3.3, there is a word said sd card safely to remove. though i have mounted it, but it always shows the same word.
what should i do?
no reply yet...hmmm..
any info?
nevermind..
i've figured it out myself.
i have same problem how did you repair it pls?
Try Full wipe in recovery or format SD card, also try with another one, maybe it's a problem in SD card itself, but then it will say "SD card damaged".
That ROM is old and it hasn't been updated. Try another one like GingerDX, GingerCruzt etc
i have GingerDX v013 but on FroyoBread it work normally
I am try format sd card but it is the same

GingerDX v24 memory card problem.

Hey guys,
I just went through the process
of installing the gingerDX rom on my x8 with Stock kernal and baseband *****15. (i have CWM)
It seems to work fine, however i then noticed that it wouldnt pick up my memory
card at all, as in i cant mount my memory card but when i remove my memory card
it says "SD card removed please inserted a new one" which still doesnt work
when i reinsert it (i have also tried a new memory card)
I have already reinstalled the ROM done the full factory reset also.
Any ideas?
Thanks
Any chance you messed around with your SD card previous to installing the ROM?
Since you obviously managed to flash the ROM off of your SD card it seems as ClockworkMod was actually able to pick up the card.
What brand/class? There are a some rare cases where Gingerbread dislikes certain SDs or where the card was improperly partitioned/formatted.
B.Jay said:
Any chance you messed around with your SD card previous to installing the ROM?
Since you obviously managed to flash the ROM off of your SD card it seems as ClockworkMod was actually able to pick up the card.
What brand/class? There are a some rare cases where Gingerbread dislikes certain SDs or where the card was improperly partitioned/formatted.
Click to expand...
Click to collapse
Yeah there is a chance that i have, but i undone everything.
Also its a Micro SD 2G.

[Q] SD card issue with CyanogenMod 7 RC1 V3 [Stock kernel] 28/04/2012

I have switched from using default Xperia x8 2.1 to CyanogenMod 7 RC1 V3 found in the following thread:
http://forum.xda-developers.com/showthread.php?t=1237930
However, this version of CM7 won't read the SD card. When I go into settings - CyanogenMod Settings - Application, I can't check/uncheck the Internal storage box option. So the SD card is not simply disabled in settings, the system indeed can't see it.
Recovery also doesn't see the SD card. I tried mounting it, formating it, Recovery keeps popping up the "can't write to SD card" (or something similar) error.
However, when I boot up the phone normally, and remove the SD card, phone will notify me that the SD card is being ejected.
SD card is in order, I tried inserting it in another phone, and everything works fine. So that is not the issue.
Can someone please help me with this? I wanted to post this in it's respective thread, but it's impossible because I have less than 10 posts.
Thanks.
Format your Sd card to "FAT32", Backup before Format.
Did that, still the same result. Any other ideas?
Edit: I also tried formatting sdcard to Ext3, still nothing.
I just restored the original 2.1 software via Sony PC companion in the end, and switched to ginger. Everything seems to be working fine now.
You can lock the thread, as far as I am concerned. Thanks anyway.

[Q] SD can not be mounted

Hello everyone.
I am using the Cyanogen mod 7 on my Galaxy Ace. Everything was going fine, I used link to SD to make an Ext partition and linked/moved all apps to the SD card.
Today I went to sleep and rebooted the Galaxy cause it had been a long time since I powered it off. When I woke up, all the widgets were broken and I had some overlay saying "Safe mode" on the bottom. I rebooted and widgets kept broken.
I realized that ALL the apps on the SD were gone, so I suspected it was not mounted.
Now the problem is that I can't get the phone to read any SD card at all. New, old, formated...nothing.
Thanks in advance if you can help me.
Regards.
Mebseven said:
Hello everyone.
I am using the Cyanogen mod 7 on my Galaxy Ace. Everything was going fine, I used link to SD to make an Ext partition and linked/moved all apps to the SD card.
Today I went to sleep and rebooted the Galaxy cause it had been a long time since I powered it off. When I woke up, all the widgets were broken and I had some overlay saying "Safe mode" on the bottom. I rebooted and widgets kept broken.
I realized that ALL the apps on the SD were gone, so I suspected it was not mounted.
Now the problem is that I can't get the phone to read any SD card at all. New, old, formated...nothing.
Thanks in advance if you can help me.
Regards.
Click to expand...
Click to collapse
Goto CWM and format your card. If in CWM i doesn't work, use a PC to do so and do not connect it via USB. Use a card reader or something. What class SD card are you using?
Anything below class 4 with Link2SD is bound to get damaged. I lost a 4GB class 2 and another 8GB class 2 because of link2sd.:crying:
And while you're on cm7, use s2e, it's recommended over link2sd for CM7. :good:
Goto CWM and format your card. If in CWM i doesn't work, use a PC to do so and do not connect it via USB. Use a card reader or something. What class SD card are you using?
Anything below class 4 with Link2SD is bound to get damaged. I lost a 4GB class 2 and another 8GB class 2 because of link2sd.
And while you're on cm7, use s2e, it's recommended over link2sd for CM7.
Click to expand...
Click to collapse
I can't, it says unable to mount in the CWM. The card is class 4.
But the problem is not the card, because I can read it in PC. And I tried another card in the phone and can't read it too. So the problem is in the card reader/mount.
Mebseven said:
I can't, it says unable to mount in the CWM. The card is class 4.
But the problem is not the card, because I can read it in PC. And I tried another card in the phone and can't read it too. So the problem is in the card reader/mount.
Click to expand...
Click to collapse
Flash to stock and check if the problem persists. If yes, then maybe your card slot is damaged.

Categories

Resources