Hello guys I have flashed the rom JVR stocks with Kernel Speedmod k15h - t24 and I can not get the root .... can you help me thanks
Havent try myself flash speedmod over JVR, but u can try install superuser & busybox from market after flash speedmod.
If still cannot, try flash different kernel...as example, Semaphore , CFROOT or Galaxian..
Or if u want, u can make a custom kernel yourself which can give u root.
I myself use semaphore kernel.
Sent from my GT-I9000 STOCK XXJVR with Semaphore Kernel
Does fugumod method work with JVR? Using it you could get root access and then reflash speedmod.
Sent from my GT-I9000 using XDA App
problem is a lack of space to install busybox and superuser with the stock jvr as there is insufficient system space -- you have to use a kernel for jvr that has a script to remove some unwanted system file (s) and then allow rooting to occur.
Thanks......I solved flashing before the root cf 4.1, which automatically executes the root, and then I flashed the speedmode ... and now everything is OK ....
Related
Hi All,
Reason for this question is that, first of all I wanted to root my newly bought SGS GT-I9000 (2.2 DDJP6) So, flashed speedmod kernel K13E (latest). Later, when I wanted to install MIUI rom, as per the instruction one need to flash K13C kernel.
But, whenever I try to flash SM - K13C kernel on top of K13E, I tend to soft-brick my phone (BSOD). I need to once again flash K13E to get back my SGS to work.
So, in order for me to get on to MIUI rom, I have two options...
1) Downgrade K13E to K13C kernel. And continue to flash MIUI rom.
2) Restore my kernel to stock kernel first. Then start flashing K13C and continue to flash MIUI rom.
Can somebody please suggest, which option would be best and highly feasible?
Thanks in advance for the responses
Prabhu.
i dont think it matters what version of speedmod you are on, its only so you have CWM to flash the cyanogen kernel.
but anyway if you want to downgrade just download the one you need k13c and flash it thru CWM or ODIN and it will overwrite your previous kernel
I did try to flash K13C on top of K13E. Odin just froze at <ID:0/022> zImage step.
Please find the snapshot attached.
how long has it been like that. ?? try to find a CWM version and see if that works.
or just flash miui with your current kernel
If u want to get on miui, follow the guide on theandroidsoul.com/net.....good to have a clean start with ezbase2.0
Sent from my GT-I9000 using XDA App
I tried the CMW version of speedmod k13c and was successful. But, while flashing the cm7-galaxys-initial-kernel.tar from odin again, I got stuck in the below attached odin screen.
Is there any CWM version for the cm7-galaxys-initial-kernel.tar? What is that I am doing different?
So i've installed a 2.3.3 rom and now i cant get to CWM recovery..
so if got this right, while on a 2.3 kernel/rom i can't see nor boot into CWM recovery even though it IS installed..
by flashing to a 2.2 kernel Using "SGS Kernel" will i be able to access it again?
or can i downgrade to 2.2 by simply flashing a 2.2 rom from Rom Manager?
Sorry for being a noob..
What 2.3.3 rom have you flashed?
Sent from my GT-I9000 using XDA App
i flashed Darky's Extreme Edition v10.1
If you want to go back to a standard firmware, you could just go to samfirmware.com and flash a firmware using odin with pit file and repartition. You could just flash jvo rather than going back to 2.2.
That would restore recovery mode back to your phone
You will need to disable voodoo lagfix first though. You can do that with voodoo toggle app on market.
Edit: Flashing a kernal like fugu will give you cwm. Just flash jvo from samfirmware first
cant i just flash a 2.2 rom from the Rom Manager app?
edit:just noticed your edit, will any 2.2 kernel work or just the ones with CWM?
For rom manager to work you will need a compatable kernal first. If you cant access cwm I would guess you have the wrong kernal or it didnt flash correctly.
If you have a 2.2.3 rom I would not recommend flashing a kernal for a 2.2 rom.
If you want cwm then you will need a kernal thats includes cwm. I personally recommend fugumod kernal.
Sent from my GT-I9000 using XDA App
HI, I put I9000XXJVQ 2.3.4 on my SGS by ODIN, it's not rooted, but I don't witch .RAR I can use to root it with ODIN to use TITANIUM backup, anybody can help me?
Or what is the best way : put a new firmware ? which one?
The best way to root, I think it is a flash Custom Kernel via Odin or CF-Root
Thanks, I tried to Root by ODIN but it's always unsuccessfull. Which Kernel do you recommend ? It's seems there are some problem with JVR kernel...
lol, if you going to root it from Custom kernel, you need to download SuperUser.apk and BusyBox . It gives you only permissions .
When I was on JVQ I using a continuum
What is a continuum ? Can I use CF-Root-XX_OXA_JVR-v4.1-CWM3RFS.zip to root with ODIN after loading Superuser and busybox ?
Yes, you can use it
I always flashed a custom .tar kernel's like SpeedMod or Galaxian.
Then I install from Market a SuperUser and BusyBox and it was all what i doing
hi there, don´t know if I can ask something about CWM here ????
I´ve got Firmware 2.3.3 Gingerbread, Basisbandversion I9000XXJVO, Kernel [email protected]#2, Buildnumber Gingerbread.XWJVI it´s rooted, superuser 3.0.7, busybox 1.18.4 works
can´t run CMW via Rom Manager as i´ve got 3e recovery ..... which ROM shall I flash via Odin to get the 2e recovery to install Clockwork Mod properly??
tx in advance !!!!
use cfroot for the JVO.. in case it doesnt exist..
try the JVT or JVR stock firmwares and thrn root your device using cfroot..!
you will have CWM recovery after you flash the cfroot in either case i mentioned above!
Sent from my GT-I9100 using xda premium
Download the Hardcore-Speedmod.tar file and flash it through Odin.
Hi,
JVO doesnt exist.?? Will try JVT instead and let u know if it was successfull
Tx!
Worked with mobile odin! Found [email protected]#2 on chainfire
Tx matey!
Hi there, I rooted my GT-I9000M on KG3 FW using this FW http://forum.xda-developers.com/showpost.php?p=23560333&postcount=498 , downloaded Superuser and busybox, downloaded ROM Manager, flashed CWM, but when I'm trying to install custom roms, it boots up on Android System Recovery 3e instead of CWM Recovery. Did I missed something or I need to do something else to make it work ?
I've got the exact same problem.
Flashed stock kg3 pda,phone,csc
Flashed rooted kg3 (pda only in odin)
Installed superuser and busybox which seem to work correctly
installed rom manager and download cmw recovery.
Tried rebooting in cmw recovery and it does not work...
I don't think the cwm is the same...I believe that is just the simplest root directory possible, nothing more. Try flashing jvt or jw5 in pda and root that after with appropriate root kernel. Then you will have no issues. Besides there are no custom roms for kg3 anyway.
Sent from my GT-I9000 using xda premium
This is a good guide by All Gamer. http://forum.xda-developers.com/showthread.php?t=1379650
I already saw that guide, but the JVP ROM is not available anymore. I googled it and I can't find it !
Guys just flash jw5 under pda and use the kg3 modem and csc. Then flash semaphore 2.7.4. tar. Problem solved. I have a bell Canada phone myself and this setup works great. Then you can flash ics or whatever in cwm. If you don't like ics, I recommend Dmore3.3 for jw5.
Sent from my GT-I9000 using xda premium
Is there any rooted kernel out there which I could use with stock kg3 rom and modem without losing anything at all?
So I could use cmw recovery for a nandroid backup of my phone?
thanks
I just did what vanisleryan said, but I still got the Android System Recovery 3e not the CWM Recovery. I'm totally lost now ...
Pascal_82 said:
I just did what vanisleryan said, but I still got the Android System Recovery 3e not the CWM Recovery. I'm totally lost now ...
Click to expand...
Click to collapse
Bud I'm running a custom rom installed through cwm and the instructions I gave are what I'm running right now. If you're rooted with the semaphore 2.7.4 kernel than you have cwm. Not sure what you did wrong? Go and install the cwm apk I think it's available in the chainfire thread.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
OK, I figured how to get to CWM. When I'm trying to install the MIUI ROM, I got bootloops. Did I do something wrong or it's just an imcompatible ROM ?
Pascal_82 said:
OK, I figured how to get to CWM. When I'm trying to install the MIUI ROM, I got bootloops. Did I do something wrong or it's just an imcompatible ROM ?
Click to expand...
Click to collapse
Not sure but I think you might just need to pull the battery when it boot loops and go back into cwm with 3 button combo, install again and should complete install. It probably tells you installation instructions on thread. Man if you don't end up like miui then try Dmore3.3... It's rock solid and resembles ics but runs on gb.
Gl
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
I successfully installed MIUI and I love it. The only thing annoying is that it's showing numbers instead of my carrier name.
Maybe you need to install a different modem, where in the world do you live?
http://forum.xda-developers.com/showthread.php?p=15443678
These are flashed in cwm.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
I flashed the original UGKG3 and the "problem" still there.
vanisleryan said:
Bud I'm running a custom rom installed through cwm and the instructions I gave are what I'm running right now. If you're rooted with the semaphore 2.7.4 kernel than you have cwm. Not sure what you did wrong? Go and install the cwm apk I think it's available in the chainfire thread.
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
i was stuck for a bit until i came across your post
:laugh:thanks a bundle :laugh:
(now, thanks to your help-see below)
Sent from my I9000 running JW5 with Xperia I9000 and Devil Kernel