I have this weird problem with my samsung I9000 camera, It shows distorted image colors. I had this problem since last month. so what the problem??? I tried many firmwares and the problem still there.. so any advice???
If flashing firmwares doesn't solve the issue, then I hope your phone is still under guarantee.
Don't forget to flash STOCK firmwares before flashing any other ROM.
It's under guarantee, but the problem is I'm in other country right now. I flashed stock rom but the problem still there.
So your issue is definitely caused by your hardware.
You'll need to reflash your branded ROM before sending it back, else they won't accept to repair or replace it.
I see, tnx for help
Related
Normally I hate haptic feedback, and set vibration for notification only. But today I got a Galaxy S which completely does not vibrate. Ok, I set everything that could possibly make it vibrate, but it still does not.
Is this a hardware issue or can it be fixed by any other software solution?
Please help
PS: I applied 3-button combo fix by ODIN3 method. Unfortunately, I did not pay attention to this issue before applying the fix, can this be a possible cause of the problem?
Thanks
PS: I applied 3-button combo fix by ODIN3 method. Unfortunately, I did not pay attention to this issue before applying the fix, can this be a possible cause of the problem?
Yes if the problem was not there before ..
Try a factory reset.
jje
Thanks for your reply. I did a factory reset, but the issue remains. I heard somewhere it might be caused by installing OCLF, which I also did...
I found an item name /lib/modules/vibrator.ko, guessing this is something to do with vibration and tried out but got no luck yet...
JJEgan, what's with you and not using the "quote" function? It's confusing.
what firmware are you on?
i had this weird issue on the bell i9000M on the stock 2.1 firmware (whatever the firmware version was before JH2). my text message notifications would not vibrate when i received them, but after i updated the firmware, the issue was gone.
kenrick.du said:
what firmware are you on?
i had this weird issue on the bell i9000M on the stock 2.1 firmware (whatever the firmware version was before JH2). my text message notifications would not vibrate when i received them, but after i updated the firmware, the issue was gone.
Click to expand...
Click to collapse
Mine won't vibrate at all. I am using Froyo, and have flashed a few ROMs to see if they help. No luck so far though. I am kinda thinking of sending it back to the seller
Yeah, it sounds like a hardware issue then if you're already running froyo. Hopefully they'll send you a new one that works.
Yes friends, I'm really in trouble my OB. Two days ago, I flashed a patched ROM to get my phone rooted through the smartflash method. Everything went OK, but short time after, I realized that my 3G/GSM signal was completly unstable.
The phone gets the signal but only for a while. Then, it loose it. Can't call, can't receive, no 3G. Full disaster!!!
So, since two days ago I'm eating every LG forum trying to find the solution, but it's impossible, no way, I'm about to throw my phone through the window.
So, pleeeaaase, could anyone help me???
From my forum lectures I could imagine that is anything involving baseband, or perhaps some network config in the service menu "3845#*970#".
My spanish network works in GSM900/1800 and WCDMA2100
I've tried to flash several STOCK firmwares with the same result: no luck.
Please, any help will be apreciated.
Thanks
wilmeta said:
Yes friends, I'm really in trouble my OB. Two days ago, I flashed a patched ROM to get my phone rooted through the smartflash method. Everything went OK, but short time after, I realized that my 3G/GSM signal was completly unstable.
The phone gets the signal but only for a while. Then, it loose it. Can't call, can't receive, no 3G. Full disaster!!!
So, since two days ago I'm eating every LG forum trying to find the solution, but it's impossible, no way, I'm about to throw my phone through the window.
So, pleeeaaase, could anyone help me???
From my forum lectures I could imagine that is anything involving baseband, or perhaps some network config in the service menu "3845#*970#".
My spanish network works in GSM900/1800 and WCDMA2100
I've tried to flash several STOCK firmwares with the same result: no luck.
Please, any help will be apreciated.
Thanks
Click to expand...
Click to collapse
First of all Question belong to Q&A section...
try a stock based custom rom like zeus, marvel or supressed or a non-stock AOSP like CM7... maybe is a hardware malfunction...
First of all, sorry about the wrong section I posted this thread, and thanks for the reply.
I don't think it's a hardware issue, because the phone was Ok before updating to a new firmware.
Anyway, after work I'll try to flash a custom ROM if no one gives me a better idea.
I'll post the result, but please, I still accept suggestions in order to solve this problem using a stock firmware.
I also have mesuared gps strenght signal with an android app, and it detects around 25%-30% where another phone with same carrier detects 75%.
Thanks, and keep in need of new ideas.
Sorry for any written mistake. My english is not as good as I wish. :·(
If you tried several roms like Zeus, and noone have solute your issue, than you should assume, that you have a hardware problem. Of course you should compare the signal strength with an other Smartphone, due their format cause a bad signal reception.
Go back to stock. I recomend this: http://forum.xda-developers.com/showpost.php?p=18946763&postcount=1
and here pick your corresponding stock:
http://lg-phone-firmware.com/index.php?id_mod=1
other thing: In which country are you using the phone, and it is buyed there? Maybe bad bandwithspecs.
Regards!
Thanks Pacos1, the phone is being used in Spain, and also it's been bought there. (weird to write you in English :·)).
I still haven't tried a custom ROM like zeus or another one. I wanted to solve the issue with any Stock ROM, but as I have been trying several with no luck, I think it's time to try a custom one. I'm thinking about Zeus.
But first, as you've mentioned bad bandwith specs, I remember that the problem came after installing a patched stock ROM from russia. Once installed, I found out that spanish language wasn't included, so I returned to a patched stock spanish ROM. At that moment I started to have signal unstability.
So, I ask you with hope, do you know something I can do to restore spanish bandwith specs, and how to do it??
That would save my ass, as I'm really touched with this trouble.
Thanks again and hope a good end to this embarassing stuff.
I'm going to give up and call the SAT center. I've tried a lot of things for the last days without luck and no more ideas come to my brain.
I've tried Zeus ROM, it's quite good and nice, good performance, but still unstable signal. I've return to an offical ROM through LG update service and again unstability.
My conclussion is that is something about RIL and baseband, but don't have enough knowledge to solve it, then it's time to ask for official help and prepare my wallet (phone is out of warranty :·( )
End of the story.
Thanks
try to install a different version of roms custom or stocks. for example form what i know v20o roms are from spain and the v20n roms are for europe use. try some different version and you may able to find the answer to your problem
Hi Guys
My phone is 2 weeks old (refurbishment)
I have rooted my n7000 with PhilZ-cwm6-XXLTA-ATL-5.15.0-signed.zip
on stock ROM N7000XXLT9_N7000XXLT3_N7000OXXLT3_HOME.tar.md5
Then started my problem with my phone.
Initially i thought that just my signal goes off and on and i did not checked anything else as this was just for a short time period. Later, the period was getting longer and longer till signal was back on again. Later i had to hard reset my phone in order to retrieve my signal. After a few hard reset i realized that baseband is unknown and IMEI is is uknown. when dialed *"06" it shown null / null. Also i tried to flash different stock ROMs
I thought its problem with efs so i replaced it from backup but nothing changed. sometimes IMEI and baseband goes on and off again and again.
Would you suggest that is hardware issue or software isue?
It does not bother me much as I will have replacement in 3-4 days. The question is could this happened to my next n7000 again?
I have read may topic on this server but nothing was same issue as mine
I have been flashing and playing with ROM for last couple of years and never had any problem.
I have the same problem before when I started using 4.2 Custom Rom but later after revert back to stock JB the problem disappear..
It happens randomly when using the phone (it doesn't happen when it's locked). The phone just freezes then restarts randomly.
I tried to find a pattern when this is happening, and found there isn't much of a pattern, but it won't let me add a fingerprint lock (crashes after the 3rd / 4th reading).
I've tried to factory reset and clear cache. I'm running out of options and am preparing to flash a stock ROM via Odin. I'd like to avoid this, since it'll trip knox and this is a new phone so I wanted to avoid flashing anything for now.
Any suggestions, ideas?
I'd say this is a kernel related crash, since it doesn't give any error, just goes out. But I hope I'm wrong.
Baseband: N920CXXU2BPD5
Build Number: MMB29K.N920CXXU2BPD6
Knox untripped.
EDIT: This seems to be a rule: it always crashes when I get to 32% of adding a fingerprint lock.
Here's an update:
Tried flashing other stock ROMs for other regions, still the same problem.
Flashed a custom kernel, still the same problem. -> Not a kernel problem
Flashed TWRP and used it for some time (to test if the phone will do the same). No problem whatsoever. I'm convinced that this is a firmware issue then.
Tried flashing every possible combination of everything. Nothing seems to have any effect. This isn't a software problem.
It's probably a faulty motherboard. The rebooting subsided though.
I'd also like to add that the S Pen holding area (the place where the S Pen is kept inside the phone) has a specific electronic smell (kindda like the soldering smell, but not quite). Really weird.
I voided my warranty by flashing stuff, so I'll probably be looking at a motherboard replacement if anyone's wondering.
Do u have xposed install?
Nah.
I've been running the stock rom for 90% of the time.
RexGrammer said:
Nah.
I've been running the stock rom for 90% of the time.
Click to expand...
Click to collapse
U solved it already? Mine used to have this problem before but its xposed that cause (in my case :highfive
Still haven't.
I'm almost certain it's a faulty motherboard.
Hi everyone,
My phone (Redmi Note 10 5G China, camellia) was lost baseband a week ago for no reason. The phone lost signal when I saw, and can't read SIM card 1 hour later. After reboot, baseband version in setting turned to unknown. The MIUI version when this problem occurs is 13.0.9. I tried to flash MIUI to the version at the time of the problem and older version (13.0.3 and 13.0.8) to repair baseband followed with tutorial on internet but had no effect.
When I flashed MIUI 13.0.4 and try to startup, the phone turn to black screen after the Redmi logo appears about 10 secs later, and then nothing happens.
The same problem happened to this phone half year ago. At that time, there was magisk in the system and I think magisk destroyed system and tried to flash to repair the system. Finally, baseband was repaired by flash MIUI 13.0.4, but baseband will lose by reboot, so I flashed again, it was solved. But a month later the same problem happened again, but it only lasted a day, and the next day it repaired itself, in the meantime, I'm just using my phone as before. About a month later I upgraded to MIUI 13.0.9 and didn't occur any problem. At that time, as long as this fault occurred, flash MIUI 13.0.4 could always solve it.
Did the failure occur on the motherboard or just is a software problem like before? If there is no hardware problem, how to solve the problem completely?
Sure Is not a magisk problem . And i dont think is related to board, or a new flash dont solve. I think Baseband is related to kernel. Probably latest update have some bugs. Or more probably u have made a wrong flash procedure. If u put the sim on second slot have same issue?
wetito said:
Sure Is not a magisk problem . And i dont think is related to board, or a new flash dont solve. I think Baseband is related to kernel. Probably latest update have some bugs. Or more probably u have made a wrong flash procedure. If u put the sim on second slot have same issue?
Click to expand...
Click to collapse
All SIM card slots are unavailable.Is flash still the problem?
i didnt never encountered this problem, i can help u so much