Related
Thanks in advance for any response!
The followings are my phone's symthoms:
1. My phone WAS FANTASTIC until I updated new Darky extreme version 9.2 (upgrade from 9.0)
2. I degraded it to the stock rom with Ryan's OLFG -> Working very well...
3. Until the phone was restarted. The phone was still working however
4. IT BECAME FREEZING. I couldnt scroll, couldnt touch the screen, or the phone response was like 5 mins later for each touch.
5. I followed instructions on the internet to flash with stock rom (JM8) and upgraded it to JPO, and the result is
6. THE PHONE COULDNT BE BOOTED at the Galaxy logo.
7. I tried to flash the phone over and over with different stock roms using ODIN 1.3 (with well understanding about repartition and PIT)
8. NOW, my phone is still able to access the download mode, but my PC CANNT SEE THE PHONE DRIVER ANYMORE(tested on 3 other laptops with the same result)
9. Reinstall USB drivers like 20 times, the results have been the same.
TO me this should be a phone death. Im gonna purchase the new Galaxy S 2
HOWEVER, If there is anyway to revive my phone back to normal (Cuz I wanna get some important data in the internal card), I will not only send a big gratitude but some DONATE as well.
Thanks.
so you put the phone in download mode first... then you attach the USB ???
Does anything happen when your in Odin ?? does it not say connected or anything ??
and have you tried doing a factory reset in recovery mode ??
aslong as your phone can go into download mode there is still hope so dont give up on it just yet
U obv have samsung kies right?. Go on processes on ur pc ctrl alt del n kill the kiestrayagent process
Sent from my GT-I9000 using XDA App
Surely I killed KS before doing ODIN. The PC(s) said it was Unknown device.
My phone was on when android 2.1 installed (but freezing, not just lagging .... completely freezing on the home screen) and would not boot if i installed 2.2
Sigh....
Thanks for your replies
The PC(s) said it was Unknown device.
Thats generally a USB /driver/windows problem .
You installed deadlys rom and it should still be recoverable even from that .
Is your phone picked up via Kies phone/Odin will need Kies installed .
I would have flashed back to a clean copy of Eclair first off to get the phone working .
jje
Both Kies and Odin could not see my phone... I killed Kies process before doing Odin, but the result was still a sadness.
Hi
My brother (a no-geek) has a captivate, and lives in a different city (I donot have physical access to the phone). He visited me few weeks ago and I installed CM-7 on his phone, i know my bad. Some of his videos were not working, so i asked him to update to the latest CM-7 build. He download the build, saved it on int sd_card and used ClockWork Recovery to install the selected ROM. Upon reboot it entered in never-ending splash screen. I found couple of odin ROMs, and posted him link, we tried to flash them, but no good.
Status --
The COM ports are detected, but the process at times halts at <SET PARTITION> at times at <SET UP>... at times all thread completed successful would show up as soon as hitting START.
I dont have a captivate, can someone please suggest a sure shot solution and post me a link for ODIN, with a root rom. I am using Team Whiskey on my Vibrant, and I prefer stable modified ROM because of its features and power.
I can explain him the process on skype using desktop sharing, but the ROM should be good. Thankyou very much in advance.
if he can access recovery, try wiping everything thru recovery then start again
Phone is in Soft Brick state.
Phone is in Soft Brick state. So i cannot boot into the phone and go to CW recovery.
What he needs is just a stable usb connection that's how he got to this point, bad communication between the phone and computer. On cm7 I beleive you need the nexus s drivers installed. Also make sure it's plugged into a usb port that's attached directly to the motherboard (back of pc, port 1 on laptop)
@studacris
I think the drivers are already installed good. The connection is also good, as i can the COM port detection in the ODIN, with one of the boxes changing its colour from NO-COLOUR to YELLOW-COLOUR.
I think the ROM builds are not good. They go action-less during flashing, actually nothing (progress bar) comes on phone, it keeps showing the Downloading screen, endlessly. Odin usually is stuck at at <SET PARTITION> at times at <SET UP>...
Can someone post a link for a test one click odin. Well i would prefer one click.
You did try DG's JF6 one click, thats the only one I use, how are you establishing dowload mode on the phone or are you even doing this.
REMY4223 said:
I would suggest to Odin back to stock then update to Froyo via Kies.
Click to expand...
Click to collapse
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Ragin Caucasian said:
if you could do all that, why would you need to send back for a new phone ? If you could do any of that, the OP wouldn't be in a non-functioning predicament
Click to expand...
Click to collapse
+1 If you read the OP the problem is he can't flash back to stock he is having problems flashing anything period, @ the OP correct me if I'm wrong but I have a strong hunch that you are leaving out some pretty crucial steps, I have a feeling that you are not putting the phone into download mode, I also believe that you are gonna need to make a jig and pay a visit to your brother to help him out especially if its bricked the same way mine just was flashing with cm7 roms. But if you are getting a com port to show without having to put in download mode then you are farther along in the boot process. If this is the case you may be able to adb into recovery do a full wipe excluding /boot and reflash. Will the PC recognize the phone with it in its current boot locked state? If so then recovering should be somewhat of a breeze.
http://forum.xda-developers.com/showthread.php?t=829392 read this post it may help otherwise there are tons others
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
viveksharma2108 said:
- I am getting to downloading mode by
--- pressing the "vol +" and "vol -" buttons and then connecting the usb cable to the computer.
--- then removing the cable, after the phone enters the download mode. Then, start the odin and connect the phone through usb cable again. The odin detects the phone on one of the COM port.
- I havent tired wiping the phone through recovery. But i need to get to recovery first. I dont know in a soft brick state if i can get into recovery.
- regarding getting back to 2.1... i would like to flash to the latest version. Kies update is not an option for me, as i not in US.
This phone was purchased from craiglist, i used one click root method to root it and the same script an option to get the unlock codes. After that i experimented a lot on the phone with various scripts. Last i was using congnition on it. Then saw CM7, i liked it on my vibrant, so i flashed it on my captivate (which i got for my brother). Now i have to get back to some stable modified ROM... I am thinking about trying Srendipity or cog ROM... but before than i have to install a rooted stock ROM.
That is the story and issue... but thanks a lot for help. Any more suggestions.
Click to expand...
Click to collapse
Try putting the phone into download mode after you open Odin. Which version of Odin is this? Also, installing the nightly build of CM7 again often fixes the boot loop on the newer builds. I would try that if you can get to recovery.
Sent from my SGH-I897 using XDA Premium App
SOLVED: when having trouble with your computer not making a good connection to the phone, try your USB HUB on the mother board. it totally fixed my problem!
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition (FROYO BASED) rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
THE PHONE CANNOT MOUNT THE EX SD CARD. So that idea's out.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.
PelvicThunder said:
So here it is. I received a cappy from a buddy at work.
Basically, she is running cognition rom, not sure of the kernal, and Cwm.
i can get the phone to reboot into RED CWM recovery, and even into DOWNload mode.
The phone was shut off during a factory reset. the battery died.
(IDK the girl was a dumbass and did it from settings on the phone not in CWM )
The phone will boot, ONLY after a factory reset from CWM but the setup google accs f/c's and the only thing i can get it to do is volume up/down pull the notification bar down and power off recovey dl mode...ect ect.
Task manager say's there are no APPS installed on the phone running? yet when i go LVL 2 RAM clear, the phone says 13 apps closed..
I think the Stock APK's have been deleted, since i cannot get into menu at all.
Since she factory reset the phone, and wiped the SD CARD, ALL CWM recoveries she created are GONE.
I have Cleared the cache, and wiped dalvik code, fixed permissions.....
I'm very familiar with the VIBRANTS, not the cappy's so this is a challenge to me.
my Vibrant has connected with all the usb drivers from samsung, but the cappy cannot. I've even downloaded the drivers for just the CAPPY, uninstalled all others, and Still not recognized, yet my vibrant does?
i've installed i think every driver on here for captivates, kies downloads, even went to the samsung website and Downloaded from there.
STILL NOT CONNECTING.
Even DL'd the AIO cappy toolbox (very nice to have for my VIBRANT)
Still no avail.
all my drivers are correct for the 32 bit vista OS. even tried on my GF's 64 Windows 7.
Still no avail.
I've installed the drivers with the phone in DOWNLOAD mode even, still not connecting.
Rebooted the computer after removing and also reinstalling drivers.
Changed between 3 diff cords, all work for my VIBRANT,
still no avail.
Any idea's would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.
jmtheiss said:
First, see if you can find out which version of Cognition she was running (Gingerbread- or Froyo-based).
Once you have that information, I believe you should be able to download the appropriate ROM on you computer and copy it to the microSD card (adapter or whatever method you need to do to get it there). Since you can get into CWM recovery, you could try flashing the ROM from there. Assuming it's a full wipe rom (and you're not concerned about keeping apps installed on the phone), it should reset things to a more workable state. (If you are worried about apps remaining... I don't know what to say at this point, since you can't get to Tibu.)
If that doesn't work, you could try the one-click back to stock (realizing that you're having connectivity issues, I'll get to that in a second).
When you connect the phone in download mode to ODIN, does the yellow COM:# show up?
If you have tried ODIN on your Vista computer, try running ODIN as Administrator.
I've had some luck in the past getting the phone to be recognized (assuming Froyo) by doing this:
1. With nothing connected to computer, start ODIN (one-click to stock would be good).
2. Pull battery on phone.
3. Reinsert battery, but do not power on.
4. Hold Vol+/Vol-/, and insert USB cable.
5. Wait for it to kick into download mode, release buttons, and wait again.
6. See if ODIN recognizes it.
Click to expand...
Click to collapse
Thats my problem, the cappy does not see that there's an EX SD card there at all? says no files, but i've tried to push a cognition rom to the EX SD and use CWM to flash it to get it to boot, but the phone cannot see that there's an EX SD, but the SD card is fine, even my vibrant used it..
ODIN as ADMIN? tried that and nothing, still no yellow com port,
i know how to use odin, as my VIBE has been "Bricked" a few times lol
the vol up/down button combo does nothing, just shows up as a charging screen, the only way i can get the phone to download mode is through CWM.
the phone is running a FROYO based cognition ROM. or that's what her bf put on there.
This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?
Rhiannon224 said:
This may sound stupid and simple but is the device set on mass storage from the settings menu? If you know.
Also have you tried mounting your sd cards in CWM?
Click to expand...
Click to collapse
lol THATS MY PROBLEM> the phone thinks it boots normally, but i cannot get the settings menu. like the "SETTINGS APK" file was deleted when she formatted the SD!
but i was just playing around and i got google voice search to pop up!
then from there i used my WIFI and setup the google settings, then i went to the market grabbed CWM and used the cognition rom i've already downloaded, and used it!
then the GREEN CWM booted, and it still cannot MOUNT EX SD card. so the flash failed.. HMMMMMM
As of now i am gonna go into the rom i DLed (cognition) and try to DL Root explorer and hard push the Settings.apk file to the system. HOPEFULLY from there i can get my settings back to restore the phone.
Realizing that it's a long shot at best due to connectivity issues, have you tried using ADB?
If so, you could push the ROM you need to the internal SD.
so, used root explorer to move the NEW cognition froyo rom from the EXternal SD to the INTERNAL SD. from there i used CWM recovery to flash the rom, the rom flash was successful, but now the phone is stuck in bootloop on the AT&T world phone screen.
and CWM will not LOAD. FML
Looks like i'm gonna have to take this apart and get to the internal SD card. =/
Can you get to CWM with the Vol+/Vol-/Power combo - hold those past one AT&T screen and when you see the second one, let go?
Adb was not an option at that point, the phone couldn't recognize it even had a phone attached to it.
but now that i'm stuck in bootloop and with no CWM recovery OR DL MODE, yeah the jig isnt' workin... HAHA
i guess its just a paperweight now.. Owell, i tried.
i held it for about 3 mins... lol and the jig i got for my VIBRANT isn't workin either. I didnt know these phone's can lose the 3 button combo reset? i often flash I9000 roms to my vibe, thats why i have a jig, but i didnt think cappy's would do that unless i flashed an i9000 rom to it? lol
Just because I'm not sure if you tried it - have you tried plugging the cable into a different port on your computer? If it's not one directly connected to the motherboard, that can sometimes cause problems getting the phone to be recognized.
Also - does the phone show any signs of recognizing there is a cable inserted (like charging)?
tried every port. No the phone only acts as if it wants to display the batt charging symbol, but does not show, I cant believe it, i actually think i bricked a galaxy s.. haha
Another long shot, but you could try the One-click unbrick. Since it's Heimdall-based, there's always a chance.
Wow, didnt know that even existed. Definately gonna be useful for my Vibrant, haha i'll give it a shot.. THANKS, i'll report back after i try it.
I hope it does something. With the connectivity issues you're seeing it's starting to sound a little like hardware issues.
I'm going to throw out a checklist of stuff, knowing that you are already experienced with ODIN and ROM flashing, simply because I know I usually can use some sort of checklist to make sure I've caught everything.
- Redownloading/reinstalling drivers, rebooting before connecting phone
- Redownloading/reinstalling ODIN package
- Redownloading ROM to flash
- Hold V+/V-, inserting USB cable
- Remove battery, hold V+/V-, insert USB, insert battery
- Hold V+/V-/HOME softkey
- Hold V+/V-/HOME/Power
- If download mode reached, allowing phone to sit connected for long time
- If download mode reached, connecting phone after opening ODIN
- If download mode reached, connecting phone before opening ODIN
- If download mode reached, connecting phone after ODIN, disconnecting, reconnecting phone
That's all I can think of for a checklist of stuff to try/retry.
I appreciate the help but i've tried all of those options several times, The jig did work to get it into DL mode, but from there i'm still in the same **** position, my computer will not recognize that the phone is connected.
Is it possible that the phone somehow lost its drivers? what i mean by that is, the phone acts different with different USB ports, completely.
On one port it says unknown device, another USB android composite device.
Its as if the phone's changing as i change ports. Very FRUSTRATING!
i think it could be a hardware issue myself, but how could a corrupt drive work so well? To the T every time i've used the jig DL mode fired up, but my computer still cannot find the drivers to run it. Hell i've even tried using winusb drivers package to force install the phone, still no avail.
Like i said, I really appreciate the input, I figured if i couldnt figure it out, someone on here had some EXP in doing this lol i've just never had a driver problem give me so much trouble. IDK, bout ready to turn this paper weight into a pile of ash.
If you can get into cwm, have you tried doing another hard reset/factory wipe?
Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.
mrhaley30705 said:
If you can get into cwm, have you tried doing another hard reset/factory wipe?
Click to expand...
Click to collapse
Nvm, reread your post. Have you tried flashing a different rom?
PelvicThunder said:
Thats the problem, earlier i COULD get into CWM, and hell i flashed the new rom perfectly!
now it is stuck bootlooping, therefore i just used the Jig, and first few times it didnt work, now its stuck bootlooping, download mode is attainable, and still NOT connecting to my pc via usb.
Click to expand...
Click to collapse
Try a different computer? also, which version o of odin are you using? I've found 1.3 & 1.82 to work best.
I had Android 4.0.3 (IceCream Sandwich) on my Galaxy S GT-I9000B (I did install it through Odin, nothing went wrong), but is was laggish (too much for it to handle, I think) and after a few months, I decided to roll it back to 2.3.3 (Gingerbread).
I started the process to install the firmware through Odin3 v1.85 - the file I download (from sammobile.com/firmware, had only one file that I used on the PDA space.
Odin recognized my phone and I started to install it, but after a while my phone was stuck on the downloading screen (2 hours of installation, I tought that something went wrong).
I then turned my phone off to try and install again, but when I turned it on, there were a Phone - exclamation mark - Computer Symbol.
I can get it to dowlonad mode (Volume Down+Home+Power), but when I plug it to the pc, it says "unknown device" and it can't find drivers for it.
I think I have the latest drivers from Samsung (I had from Kies and I re-downloaded a file somewhere from this forum named SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe).
It appears that since windows can't install the drivers, Odin doesn't recognize the device - it was recognizing it before, when I was installing the firmware.
Now I'm stuck - I tried anything I saw in this forum and in other places - I did even pray for a miracle, but it didn't work
I know that there must be a way, but I don't know how.
Before I forget, I'm using Windows 7 Ultimate x64.
If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.
KainFromNod said:
I know that there must be a way, but I don't know how. Before I forget, I'm using Windows 7 Ultimate x64.
Click to expand...
Click to collapse
Ok, k4Z3666, has given you a starting point...the phone is still in download mode but without a booting ROM, so its OK, the problem is your PC, USB cable or USB port. If you want to be quick about it, just try on a lap top..if not a simple Reboot of PC ( after removing power cord) and Phone (after a battery Pull), and a switch to a different USB port at the back of PC can solve this for some...for other solutions try these http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571 anything else you may need can be found on My Android collections., link below
k4Z3666 said:
If you can get it in download mode everything should be fine, I've had a problem like this, my pc couldn't see the phone in download no matter what. Try to use another USB port, better another PC. Also I've heard that x64 doesn't get along well with Odin. If possible you can try Linux and Heimdall, after all Android is Linux too.
Click to expand...
Click to collapse
I tried other USB Ports and also rebooting. It was working just fine - it seems like a driver problem to me.
My notebook is dead, but I'll try using someone else computer.
Does Odin runs in Windows XP? I might try it in my virtual box - I doubt that it will work, but it is the best thing I have to do untill tomorrow.
I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300
KainFromNod said:
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]
KainFromNod said:
I got it working in my mother's notebook - should I try something different? I only have the PDA, should I try a PIT?
I don't know what those do, but I read somewhere that PIT is used to recover bricked phones.
EDIT: I installed only the PDA, it worked fine on the 2nd time (first time, it got stuck but I could make it work changing the usb port and cable).
Now it is on loop - it repeats the samsung logo over and over again. Any ideas now?
Click to expand...
Click to collapse
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah
Ok, I'm posting it here just to leave a reply and reference for future generations, as my problem was solved.
xsenman said:
what ROM did you use? Did you do any wipes?
Opps..you got an i900B, so make sure you are only using I9000B ROMS as i9000 is not compatible with your phone
I used a firmware from my country (available here: sammobile.com/firmware/?page=3&model=GT-I9000B&pcode=ZTO&os=1&type=1#firmware) and I wiped the cache (I'm not sure what this means, but I believe it is the 2 options on volume up+menu+power)
Follow guidelines from here
http://forum.xda-developers.com/showthread.php?t=919219
http://forum.xda-developers.com/showpost.php?p=22941192&postcount=300
Click to expand...
Click to collapse
k4Z3666 said:
Assuming that you're on the right rom for your phone can you enter recovery mode? Try reinserting battery, and enter recovery with [vol+, menu button, power on]
Click to expand...
Click to collapse
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
yahyoh said:
Yep if u want to back to stock u need pit file because ICS use different system file
Why u don't like ICS ? Its way better and faster than sammy ROM even its more stable , I think u should try it again with devil kernel with oc to 1.2 it will fly u can add some live oc which will give more fluidity
Sent from another galaxy powered by CM10 & Syiah
Click to expand...
Click to collapse
ICS wasn't faster here - it was laggish and always crashed some common apps (gallery, music player). I believe that the firmware wasn't completely "done" as it was being adapted from another version (my phone is brazilian) and some functionalities that it has (i.e. digital TV) wasn't available.
What I done to correct the boot was simple (I found a tutorial in a brazilian site, so it had all the roms that I needed).
1) Used a PIT and a stock rom to get it back to factory version;
2) Upgraded to Froyo (original) - That was kind of a mistake, the tutorial said to do it because then KIES would update it automatically to Gingerbread. The phone was fully functional, but KIES said that it couldn't update it (it recognized the phone and everything).
The tutorial stoped there, but since I had the ROM, I used Odin to install Gingerbread (the one that was looping) and it was done.
Now I need to remember how to root it because there are some dumb apps who can't get away (i.e. Orkut app, some demo games).
Thank you all for the help!
KainFromNod said:
I was entering recovery mode, but it was giving me some error when I tried to wipe the 2 things that I forgot the name =/
Click to expand...
Click to collapse
From recovery you can always try to flash another kernel, that would probably resolve things too. Anyways the problem's solved, glad to help
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
You will hadware buttons failure when you flash a i9000 ROM on an Anycall M110S ( Korean Galaxy S) , so I am curious are you sure your phone is not an Anycall M110S? since you also getting Anycall boot screen...sounds odd, that i9000 will do that.
For USB connection problems , just try link on Quick Fixes and Solutions link below
slicer91 said:
Hey guys, I'm really in a bad spot here.
So I installed CM10 on a GT-i9000, worked fine except for the hardware buttons not working. So from there, I decided to install SlimBean (A foolish mistake that I thought was foolproof). And boom, now I am here, stuck in a CWM bootloop, and I've tried factory resetting and all, still boots the same.
I've tried installing other roms, sometimes it reboots during installation and doesn't complete, and even if it does complete, same problem, it boots into CWM. And I've noticed a new Samsung AnyCall Boot logo every since I tried SlimBean.
I've tried updating the kernel, no luck. I bought a download mode jig, but windows does not detect the Galaxy S in download mode with Kies installed. (I think I disabled USB Debugging in CM10)
Any suggestions? This is really stressing me out. I'm prepared to use odin, but download mode is not recognized on my PC.
Click to expand...
Click to collapse
Go back your original firmware...
Any updates to this?
I am having a similar situation. I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000. It is now stuck in recovery mode. I tried doing factory reset and wiping the cache and dalvik cache and tried reflashing. Everything goes fine but gets stuck in the recovery mode - more correctly in download mode but the download mode logo flashes twices and enters to recovery mode.
Any possible solutions to get me out of this mess?
Thanks,
Sid
your problem will be solved with this post:
http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Edit : above url is for S+ your device is S , sorry .
Thanks, but anything similar for Galaxy S? And remember my download mode does not stay, if flashes twice and runs into recovery mode. So if your solution is something to do in recovery mode it will be helpful (or if your solution is to first make me stay on download mode and then flash something using odin I will be thankful)
Regards,
Sid
sidswami said:
I tried flashing ICS ROM to my Anycall Samsung Galaxy S GT-I9000.
Click to expand...
Click to collapse
Check your Model, Anycal does not make GT I9000, it makes only M110S and firmwares / solutions for them vary.
If you have Anycal M110S visit PIT STOP link below to solve your problems
Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.
worked for me
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
beben3 said:
Hi..also had the boot loop...
fixed that easily by removing the accu..
removing external SD !!
Thats it !
Worked for me !
Later on I inserted the SD again..and everythings fine
Click to expand...
Click to collapse
Glad that worked for you, but I for some reason can't be so lucky. I tried to also flash CWM 10 but after the home key not working I decided to flash Slim Bean and now I am stuck. My phone isn't even recognized by Odin any more and I have tried different USB ports and even my laptop with Heimdall. I don't know what to do at this point, but any kind of suggestions would be great. Usually when I get stuck I just flash back to Stock and start all over with a new ROM or kernel but I have no idea where to go from this point.