Related
Hey all you fellow sad bunch of Bell Galaxy owners,
I did the bell upgrade via kies, did factory reset, cache wipe, format sd card and so far my phone is running just dandy on the new froyo.
I did it because it was all official and now I see that they pulled the update! And looking at all these threads it looks like this will brick my phone in a matter of days simply because of bad software, not hardware.
Should I try to downgrade before I'm doomed? And where do I find the old bell files to do this odin thing?
Any advice/curious musings would be greatly appreciated.
Yes.
I had mine on jk4 for a day and then changed firmwares. No issues so far.
I'm running jpu now.
Thanks! Hey it's not clear to me as to what is the best route to do the downgrade for the i9000m, and which roms are compatible with this bell version, can I install any rom and be fine?
I have the idea that the i9000m is quite different from the other galaxy s variants.
Rom manager doesn't work on this phone so I guess my only option is odin?
From what I understand, failure is mainly caused by a data corruption on the SDCard when changing firmware. So I'd stay away from frecquent firmware change for now...the more you do it, the higher the risk is.
JK4 is still official, so if you get issue with it, you're pretty much covered by the waranty.
I did mine and its been fine no problems
Sent from my GT-I9000M using XDA App
Dusante said:
Thanks! Hey it's not clear to me as to what is the best route to do the downgrade for the i9000m, and which roms are compatible with this bell version, can I install any rom and be fine?
I have the idea that the i9000m is quite different from the other galaxy s variants.
Rom manager doesn't work on this phone so I guess my only option is odin?
Click to expand...
Click to collapse
Rom Manager won't work on JK4 stock because it installed 3e recovery which checks that update.zip files are signed before running them. If you choose to stick with JK4 and want to pursue Rom Manager, your best bet is probably using a kernel which has Rom Manager built in. For example, I flashed SpeedMod Kernel k10j on one of my phones (check the i9000 dev forums).
If you choose to "downgrade", use Odin. JK3 (2.2) and JH2 (2.1) are Bell specific firmwares. Alternatively, using the reg hack solution might work (I've never used it myself so can't offer help). Let us know if you need help with Odin or flashing an earlier firmware.
How do I downgrade my Bell Vibrant? I have 2 Bell Vibrants.. 1 already got the SDcard error 3 days after updating to 2.2.. My second one is still working (2.2) and I want to save it! Please show me how to safely downgrade back to 2.1
Bricks were happening before Froyo 2.2 (JK4) came out of the official channel (Kies).
Nobody can say for certain that it has something to do with JK4 or with an internal hardware issue that is a ticking time bomb. If your phone is working fine on 2.2 (like mine), enjoy it, otherwise send it back to Bell for repair when it dies.
bimmerboii said:
How do I downgrade my Bell Vibrant? I have 2 Bell Vibrants.. 1 already got the SDcard error 3 days after updating to 2.2.. My second one is still working (2.2) and I want to save it! Please show me how to safely downgrade back to 2.1
Click to expand...
Click to collapse
1) Verify you have Recovery and Download mode still working (3 button combo).
2) Remove any lag fixes if you have applied them and download the UGJH2 PDA from Samsung firmware website.
3) Start Odin and put the JH2 firmware (tar file) in the PDA section.
4) Put the 512 pit file that came with Odin install in the PIT section.
5) Click Re-partition.
6) Stop Kies if running and connect phone to USB cable.
7) Ensure that Odin recognizes the phone in the ID:COM section.
8) Click Re-Partition and hit Start.
9) Pray that it works, wait for it to reboot and wait for it to startup, it may take longer than normal for the first boot.
I'm not responsible if it does not work out for you.... Personally, if you have it working on JK4, I would leave it well enough alone.
Thanks for giving the step by step guide.. I am experiencing some FC's on JK4.. I think it's on it's way to getting bricked.. I wana put back JH2 as soon as possible
I went back to JK3 as I've had no problems with it and it's given me the best battery life. Its currently sitting at 84% remaining battery after 12 hours use.
xedd said:
1) Verify you have Recovery and Download mode still working (3 button combo).
2) Remove any lag fixes if you have applied them and download the UGJH2 PDA from Samsung firmware website.
3) Start Odin and put the JH2 firmware (tar file) in the PDA section.
4) Put the 512 pit file that came with Odin install in the PIT section.
5) Click Re-partition.
6) Stop Kies if running and connect phone to USB cable.
7) Ensure that Odin recognizes the phone in the ID:COM section.
8) Click Re-Partition and hit Start.
9) Pray that it works, wait for it to reboot and wait for it to startup, it may take longer than normal for the first boot.
I'm not responsible if it does not work out for you.... Personally, if you have it working on JK4, I would leave it well enough alone.
Click to expand...
Click to collapse
is this likely the best way to get an i9000m that has been upgraded to 2.2 to have e2 recovery? Also where would i download the JH2 rom file?
AdamArchibald said:
is this likely the best way to get an i9000m that has been upgraded to 2.2 to have e2 recovery? Also where would i download the JH2 rom file?
Click to expand...
Click to collapse
its all here http://forum.xda-developers.com/showpost.php?p=9776920&postcount=26
successfully downgraded to 2.1 will now upgrade to 2.2 JL2
I've been running JK4 since it got realeased and so far so good. Never had any probleme related to firmware. My phose is a new one got after my first one died using JPC so I don't think it's related to firmware but realy hardware.
Sent from my GT-I9000M using XDA App
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
Hi,
I'm trying to upgrade my firmware through Kies, as I've just connected and it's alerted me that I am now able to upgrade to PDA:JVN / PHONE:JV1 / CSC:JV5(OPS). I am currently on PDA:JP5 / PHONE:JP3 / CSC:JP4(OPS), but when I click on the upgrade, it will pop up with a window that looks like it's downloading the firmware, but they disappears as quickly as it appeared, and my phone then needs to re-connect to kies...
This appears to be an infinite loop, without ever really getting anyway. My phone is rooted if that matters, and I don't think I have any lag fixes applied? I know I have applied lag fixes before, but I think I've since flashed with the stock 2.2 firmware, so there shouldn't be any lag fixes going on... :/..
Does anyone know what I'm doing wrong or how I can better debug this problem?
Thanks in advance
Denno
denno020 said:
Does anyone know what I'm doing wrong
Click to expand...
Click to collapse
Using Kies, may be
If you have the 3 buttons combo, prefer Odin...
Kies is Satan Tool, its a big cup of ....
if u want do upgrade use just and only ODIN
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
thanks for the reply Ali Khalid... I'm looking on samfirmware, but I'm not able to find the Gingerbread firmware version for Australia? I downloaded I9000XWJVN ## under the 'America Australia Samsung I9000 Firmwares' heading, but that only had a tar file, with a heap of files I didn't recognize..
Any chance you could give me some more direct help? Like exactly which one I should download for Australia? Looking at the country letter code, which is DT for Aus, they only have firmwares for 2.1 and 2.2...
I'm really lost with this upgrading thing :/..
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
denno020 said:
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
Click to expand...
Click to collapse
Is there a specific reason you need Australian version? You can flash any firmware you wish.
Sent from my GT-I9000 using XDA App
There isn't a specific reason... I thought I would have to go with the Australian one to be sure that calls and stuff can connect to my phone through the network correctly? I'm completely lost with all this stuff to be honest...
If I don't have to get a specific Aussie one, which one should I download? As I mentioned earlier, I downloaded one called I9000XWJVN ## but it didn't have the pda files and pit files as expected.. they were all different things :/..
Im running JVS 2.3.5 (with JVR modem) I haven't bothered to flash an Australian/Optus csc but i guess you can if you wish. I did have to add APNs but that is no big deal.
After that you might want to flash a non-stock kernel for root, lagfix etc. I am running semaphore 1.7 and stock+ theming for extended power menu, %battery crt off etc.
Keep in mind if you are going down this route you will be voiding any warranty you have but ask anyone here it is worth it to make the most of your phone.
Do some reading around the forum and ask any questions you need so you know what you are doing.
Sent from my GT-I9000 using XDA App
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
denno020 said:
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
Click to expand...
Click to collapse
Sorry I was really confused once too, I will do my best to break it down a little.
You don't need a specific modem for Optus although different modems will give different results depending on your location regarding signal, 3g, gps and battery (due to signal strength) its quick and easy to change modem and this can be done anytime (through CWM recovery) without any data loss.
CSC is a bit different, although you can use a CSC that is different to your location/carrier it basically denotes any specific apps and APNs. CSC can be changed with odin but will factory reset you phone and you will lose data.
-APN details can be found with a quick Google search and can be added no problem through settings>wireless and network>mobile network>access point and as I don't care for carrier specific apps (apart from "my account" but the .apk for that easy to find) I haven't bothered to change it. Others do find it important.
I know the stock 2.3.5 JVS from samfirmware will contain the 3 files (code, modem, csc) and the .pit file for flashing because it is what i flashed.
Or alternitavely there are a few custom roms that can be flashed through odin regardless of what firmware and bootloaders you are currently running.
Some firmwares/ROM only have one file and it can be flashed under PDA. There are guides for flashing on samfirmware(for stock), here and video guides on YouTube. Always stick to the guide.
Decide what direction you want to take (stock with non-stock kernel or custom rom) and read up on some of the topics in the general section about flashing and/or any topics relating to any ROM you want to flash.
Once you know what you want to do with your phone it will mean much less reading for you and others will be able to help you more as you will know what questions to ask.
There is lots of info here, its just a matter of knowing what info you need and how to find it.
Hope that helped a little..
Sent from my GT-I9000 using XDA App
denno020 said:
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Click to expand...
Click to collapse
If you phone is rooted download titanium backup and backup all apps before flashing, then install it again after flashing and restore only apps.
Wow thankyou so much for that breakdown Mrlwik! That does actually help a little! I'm going to find a stock firmware from samfirmware instead of a custom rom.. But it's great to know that I can swap modems to try and find the one that best suits my needs, as I do have problems with reception in my house, so maybe a new modem could fix that?
Anyways, thankyou again, and great effort and writing all of that with your phone! It definitely helped
Well I finally took the plunge and flashed my phone. I used the JVS firmware, which worked seamlessly. Then I wasn't sure if I were still rooted or not.. so I downloaded Dark Core (or something), and flashed that in PDA using ODIN. Then I was definitely sure I was rooted . Now I've just got to figure out a 'lag fix', my quadrant score at the moment is ~1400, but I reckon I can get much better, so I'll try some overclocking apps from the market I think, see which works best for me.
The most painful thing is restoring all my apps using Titanium Backup.. I have to click install for everyone of them, it doesn't automate it, which is so very annoying, but I'll get there eventually :/... lol
Thanks for all your help Mrlwik, very greatly appreciated
I had a similar problem with KIES in South Africa.
I don't use KIES any longer, it doesn't even have the "connect to internet" option.
Since you've rooted your device, I'm sure you have Clockworkmod flashed...if not, flash that using Odin. After that, you can flash any ROM, custom or stock, using clockworkmod recovery, then you don't require Odin again...just copy the ROM or apps you want to flash to your phone, boot into recovery, flash, and restart. Can't be easier than that.
ali_khalid5518 said:
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My question is, will this wipe out the device? I want to upgrade and keep my information and apps on my phone.
hey guys have the rogers captivate 896. I have a jig for download mode. Ok so I was on miui gingerbread. I wanted to try with weUI ics. So I followed their procedure correctly. Install completed but like another user I got it hanging at the MI boot screen. So having to flash to stock before I felt comfortable. So I've always used odin 1.32. I set the pit file that came with it and downloaded the rogers. 2.2 stock files. I get in d/l mode, run odin does some things, and it gets halfway through the factoryrs file and fails. I'm freaking lost here. Any ideas on how to get this back to stock?
If its the same files you used before I'm willing to bet its a funky usb cable. But before you go buy another (unless you have a spare) Try rebooting machine running as admin re-downloading the firmware. Also probably not the issue Odin 1.35 is kinda older version, but thats just my personal thing.
on both of those and still no factoryrs pass. switched new usb cable, switched all ports. so if the ics files installed, would I be able to go back to 2.2 stock rom? can anyone walk me through this as I think I'm doing this write. I even tried clicking reset bootloaders and that didn't work. So here's what I'm doing.
have jig, go into d/l mode
start odin 1.82. check repart, and leave the other two checked. load 512 pit, phone tar file and start.
this seems insanely easy. did this before but even after 10 attempts it fails. could ics be messing this up?
Don't check repartition and try it.
shouldn't you always repartition it though?
going to try flashing from a different pc. so i'm able to get in d/l mode which I know is good. I don't know what took on my phone, I'm thinkin ics installed, so can anyone point out the proper procedure to go back to 2.2 on a rogers captivate? is it merely odin, 2.2 stock, check repartition, set pit and tar, then flash?
Search for a member that goes by trusselo he has done some good stuff for the Rogers captivate
Here is his xda page. look in his signature
http://forum.xda-developers.com/member.php?u=3531712
hey I tried 3 different cords, 2 computers and multiple usb slots. All fail on factoryrs.rfs. So even in unchecking re-partition this tanks. I have a jig so getting into d/l mode is easy, I just can't get this darn thing back to stock. so i'm guessing (big guess here) I have ics files on my phone, how would I get back to 2.2. Be gentle I'm still slightly new at this!
xtracrispy69 said:
shouldn't you always repartition it though?
Click to expand...
Click to collapse
I've used Odin to get out of ICS and I never checked repartition or use pit file. But I use I897's firmware. Never used i896.
Sent from my ICS powered Captivate using Tapatalk
prbassplayer said:
I've used Odin to get out of ICS and I never checked repartition or use pit file. But I use I897's firmware. Never used i896.
Sent from my ICS powered Captivate using Tapatalk
Click to expand...
Click to collapse
what did you flash? I tried flash 2.1 and 2.2 both fail factoryrs.rfs. even tried odin 1.81. so it has to be something with the 2.2 and 2.1 rom. Just want to get this darn thing back to stock. any ideas?
Any GB firmware I had laying around. KH4, KJ3, KF1. I don't usually use GB anymore but I've needed to go back a few times to try things out.
see most posts i've read say you must repartition with 2.2 and below and can't use a pit file with 2.3. I'm wondering what'll happen if I just flash a gb 2.3.
xtracrispy69 said:
see most posts i've read say you must repartition with 2.2 and below and can't use a pit file with 2.3. I'm wondering what'll happen if I just flash a gb 2.3.
Click to expand...
Click to collapse
Go for it 10char
xtracrispy69 said:
hey guys have the rogers captivate 896. I have a jig for download mode. Ok so I was on miui gingerbread. I wanted to try with weUI ics. So I followed their procedure correctly. Install completed but like another user I got it hanging at the MI boot screen. So having to flash to stock before I felt comfortable. So I've always used odin 1.32. I set the pit file that came with it and downloaded the rogers. 2.2 stock files. I get in d/l mode, run odin does some things, and it gets halfway through the factoryrs file and fails. I'm freaking lost here. Any ideas on how to get this back to stock?
Click to expand...
Click to collapse
Are you using 2.1 and 2.2 packages that have bootloaders on them?
Hello everyone,
I've tried flash my i9000 to CM10 JB and sometimes it reset itself and went into clockwork mod, not sure why. I guess i'll go back to the stock rom then. My mistakes that i've done at first place is didn't do a backup (or maybe i did, can't rmb) couple months ago.
I've downloaded the files from samfirmware = I9000XWJW6_I9000OPSJV6_OPS (file inside = JW6_JV6_JW1) and also planning to flash it back to stock rom using odin3v1.87 with I9000_s1_odin_20100512.pit. The thing is there are other files missing from what i can download from samfirmware such as PDA, PHONE, CSC, BOOTLOADER ....etc. And i've tried but i couldn't find a tutorial on how to put the appropriate files into these sections.
I've tried look up into whats in JW6_JV6_JW1 but there isn't any thing that i could found to use as odin's input.
Is there any full instruction/tutorial step-by-step on how to flash i9000 from CM10 JB back to stock I9000XWJW6_I9000OPSJV6 (i'm from Australia and i guess i should put that back to normal as i will use kies as i usually did back to the old days). I really couldn't find any relevant topics flash back to I9000XWJW6_I9000OPSJV6 that i want. Others with different CSC, PDA, PHONE files i dare not to risk mixing up with the samfimware that i download, just in-case i brick my phone lol.
Thanks for your attention. Really appreciate
http://forum.xda-developers.com/showthread.php?t=1631564
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
search before asking