Friend has a nook and cm7 running on it
runs fine
When I put my phiremod v7 + honeycomb micro sd in it, it wont boot
shows black screen
it boots fine in my nook using same micro sd
what gives?
Related
Rooted my nook, have the latest version of HC from Deeper Blue running on it. Installed the Nook app from the market, inserted a newly formated SD card, and I am unable to download any of my books. Get the error message "no such file or directory"
Anyone have any ideas?
Thanks
Other app such as Adobe Reader works? Maybe Nook app need /media mounted.
Adobe reader works just fine
You need to specity if you're running form SD or emmc. I installed on emmc and it was working fine except for the back button it forces Close. Some people are having problems with applications that depend on the SD card. You need to format the SD on another device and then put in your nook. Launch settings then check storage to see if you have the SD card mounted. Again I had Nook nicely working on Honey V.4 emmc.
Hi all
I am running Phiremod 5.3 on my NC am very happy. But I would like to run Honeycomb with GAPPS installed off my SD card. I cannot seem to find an image of HC that has GAPPS installed for the SD card. Any pointers would be appreciated.
Thanks
Bob Silver
there is a thread on the forum that has honeycomb with gapps for sd card. you have to do a bit of prep work and have a 2nd sd card to do it but i've had it running. It's a bit buggy and my nook runs a bit warm in spots with it. i've chosen to not run it and run nookiecomb instead.
found it.
http://forum.xda-developers.com/showthread.php?t=998861
Thanks for this. That is what I thought on the Gapps.
How does the combo work? What are you dual booting? Is HC even worth the effort?
I am using Phiremod 5.3 and really am very happy. Once he puts the menu bar on the screen bottom this becomes a pretty good tablet OS.
hanks Again.
Bob Silver
FYI about erratic boot int cm10 I experienced.
setup
copied cwm image to SD card (Sandisk 32G class 4), booted into cwm, mounted /sdcard, adb push cm10 zip, installed zip w cwm.
Examined card with gparted and it appears to be properly formatted with five partitions.
CWM screen is 180 degress rotated and pulses off momentarity every couple seconds, but it seems to function.
I can boot into cyanoboot, and boot into CWM recovery (with the rotation and pulsing issues noted above).
The first four times trying to boot into cm10, I briedfly saw the cyanogenmod logo (with the rotating concentric circles). Then it stopped, screen went dark, and the 'n' Nook logo appeared and it booted into what appeared to be the stock ROM until it got to 99%, then it was stuck.
Shut down device, removed SD card, re-inserted, and it booted into cm10. Perhaps the card was inserted not quite correctly?
In any case, great to have it working. Thanks to bokbokan for porting verygreen's CM10 HD+.
Nook HD 16G w CM10 on Sandisk 32G sdcard
I was installing CM from verygreen thread "http://forum.xda-developers.com/showthread.php?t=2032364" Nook HD+ CM10 development (sdcard) updated 5/11.
I am using a san disk 32gb sd, i followed the steps unzip cwm image and write it to your sdcard using Win32 Disk Imager as he linked. Did that and booted into the nook hd, mounted it no problems. I haven't used ADB so i turned off the nook as it says to do and went to put the cm-10-20130511-UNOFFICIAL-ovation-sdcard.zip on the sd card. One problem the sd card now shows 116mb only of the 32gb and with no option to reformat it to make it larger. I tried formating from CWM didn't do anything. Pleas help i read the forums link for about 30mins with no answer to solve this problem. Just seen pushing ADB which i'm not familiar with. Thanks for any help suggestions.
I have an install guide for that ROM. Look at my HD+ easy install guide linked in my signature. I have a new image file there to help you.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
I have an install guide for that ROM. Look at my HD+ easy install guide linked in my signature. I have a new image file there to help you.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thank you! One problem so far, i went and installed the cm10 and gapps on the internal sd. i rewrote the sd card with your 6028cwm.
Once i insert he SD it says on the bottom CWM v6.0.2.7 and it wouldn't mount the emmc to install Cm10. I rewrote the sd card again and it said it took and still same thing.
Also tried your newer ramdisk but i can not rename my old ramdisk.cwm once its in my computer.
EDIT: I was using the Micro to full size SD adapter and that was locking it. I took the Micro and put it right into a micro sd card reader and BAM! Installing now.
Ran into this problem where it just locks up on booting, I take the SD card out stock nook works great. Loads to 99% then nothing, just hangs. I let it sit for an hour even.
gamer4067 said:
Ran into this problem where it just locks up on booting, I take the SD card out stock nook works great. Loads to 99% then nothing, just hangs. I let it sit for an hour even.
Click to expand...
Click to collapse
You are confusing me. This thread I'd for HD+. Yet you say the CWM said v6.0.2.7, which is for the HD. You should not be following my old guide if you are using verygreen's new SD scheme.... Oh I see your other comment was an old one....
The reason it stopped at 99% is the old SD version has too many partitions to allow stock to boot. It hands at 99%. To fix the problem, remove the SD before booting to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You are confusing me. This thread I'd for HD+. Yet you say the CWM said v6.0.2.7, which is for the HD. You should not be following my old guide if you are using verygreen's new SD scheme.... Oh I see your other comment was an old one....
The reason it stopped at 99% is the old SD version has too many partitions to allow stock to boot. It hands at 99%. To fix the problem, remove the SD before booting to stock.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
With no SD card in it works great on stock nook. The problem i'm running into is it wont boot to CM with the SD in. I get the cynogen start screen then a laggy cynogen loading then it goes to the stock nook with the 99%.
So the problem i am having is i cannot boot to CM with the SD card in. Without the card it works fine.
With the card in its boots to CM screen and the circle loads choppy and then it swaps to the nook 99%.
I just want the CM to boot. Any help will be greatly appreciate it. I can boot to CWR and i did mount the SD card and still same problem.
gamer4067 said:
So the problem i am having is i cannot boot to CM with the SD card in. Without the card it works fine.
With the card in its boots to CM screen and the circle loads choppy and then it swaps to the nook 99%.
I just want the CM to boot. Any help will be greatly appreciate it. I can boot to CWR and i did mount the SD card and still same problem.
Click to expand...
Click to collapse
You need to abandon that SD setup and start fresh with verygreen's new SD scheme. The old setup had some bugs. His new setup work much better. So go to his HD+ sdcard CM10.1 thread and start over with his early 7.1 cwm image. Then install his latest ROM and gapps and you will be very happy.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
You need to abandon that SD setup and start fresh with verygreen's new SD scheme. The old setup had some bugs. His new setup work much better. So go to his HD+ sdcard CM10.1 thread and start over with his early 7.1 cwm image. Then install his latest ROM and gapps and you will be very happy.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thank you!
I was running CM10.1 off of an sd card on my nook hd+. After I charged it over night the nook was frozen in the native OS showing 99% loaded. I rebooted it and now the nook freezes on the Black screen with the white nook name. I am able to boot into the cyogenboot menu but when I select install from emmc it says that it cannot mount. I've tried several versions of cyogen and i've tried taking the sd card out to boot to native OS, however now the native OS does not get past the Black screen with the white nook name. I think the EMMC is bricked? Anybody with any ideas?
jb0756 said:
I was running CM10.1 off of an sd card on my nook hd+. After I charged it over night the nook was frozen in the native OS showing 99% loaded. I rebooted it and now the nook freezes on the Black screen with the white nook name. I am able to boot into the cyogenboot menu but when I select install from emmc it says that it cannot mount. I've tried several versions of cyogen and i've tried taking the sd card out to boot to native OS, however now the native OS does not get past the Black screen with the white nook name. I think the EMMC is bricked? Anybody with any ideas?
Click to expand...
Click to collapse
There is no solution yet . verygreen has made a rom booting off sdcard . you may ask him for help.
I can't believe that you can brick the nook just by running CM10 on an SD card. is this just some issue with the HD+? Does the n2d card pose the same threat? Or is it just best to not run android on the HD+. It sucks because I feel like stock is very slow.