[Q] Using v8 supercharger - XPERIA X8 Q&A, Help & Troubleshooting

dear friends,
i was wondering if x8 could use supercharger script? any one have this tried on their x8's?

Will try in a secound...

Ken-Shi_Kun said:
Will try in a secound...
Click to expand...
Click to collapse
Well, it "works", but not really doing anything (well, choos multitask, wich works some better)... I think doxianh did very good with the gingerbread
Quadrant shows nothing in particular...

edward091810 said:
dear friends,
i was wondering if x8 could use supercharger script? any one have this tried on their x8's?
Click to expand...
Click to collapse
i bricked my phone twice using that supercharger... maybe i should be contented on overclocking with cyanogen mod 7... using seus again..

edward091810 said:
i bricked my phone twice using that supercharger... maybe i should be contented on overclocking with cyanogen mod 7... using seus again..
Click to expand...
Click to collapse
Well, I don't use overclock, so I can't say anything from that.
But I think that gingerdx don't really needs that v6 script... Have tried since other modes (including agressive ones) and haven't really encountered problems, instability, but it is deffinetley not better, than the "stock" dx...

edward091810 said:
dear friends,
i was wondering if x8 could use supercharger script? any one have this tried on their x8's?
Click to expand...
Click to collapse
It's in the x8 dev forum lagginess thread. Yes, it works and so does kickass with io tweaks.

edward091810 said:
i bricked my phone twice using that supercharger... maybe i should be contented on overclocking with cyanogen mod 7... using seus again..
Click to expand...
Click to collapse
me too

i tried and i bricked it too ><"

suntreater said:
i tried and i bricked it too ><"
Click to expand...
Click to collapse
Do you use overclock?

How did you manage to brick your phone? Mine is working fine.

override187 said:
Do you use overclock?
Click to expand...
Click to collapse
yep ><"
with gingerdx 008 rom.
it all works fine before reboot, after the reboot, my phone just stuck at SE logo

suntreater said:
yep ><"
with gingerdx 008 rom.
it all works fine before reboot, after the reboot, my phone just stuck at SE logo
Click to expand...
Click to collapse
mine too works good and after rebote stuck on SE logo, maybe because of overclock i dont now and i am sure that i do everything properly
GingerDXv009 [email protected]

Me too...I brick my phone after using it. Luckily i follow this link (http://forum.xda-developers.com/showpost.php?p=11934117&postcount=7) to solve the problem...^^
I think gingerdx already good enough, there is no need to use supercharger. I used fast reboot, OC and latest gingerdx(V10) and everything work well..^^
Thanks to doixanh..!!!

For me has run fine on dx 010 and 012, the only problem is that values doesn't stick.

...
i think that GDX dont need this script

p41n said:
For me has run fine on dx 010 and 012, the only problem is that values doesn't stick.
Click to expand...
Click to collapse
do you have stock or alfs kernel

Well, for me sometimes it works sometimes not. It is easy to brick phone. I suggest not using it

Name_Benjamin said:
Well, for me sometimes it works sometimes not. It is easy to brick phone. I suggest not using it
Click to expand...
Click to collapse
This thread is from last year! Stop reviving these old things!
Sent from my MB860 using xda premium

Related

Phone stucks when I overclock it.

I'am using 748mhz parasmi OC kernel. When I set more than 604mhz after some time phone just got stuck. I'am using parasmi EmaNon rom to. What Iam doing wrong? And what I should do?
Sent from my piece of **** using Tapatalk.
You have to move Dalvik cache on SD-Ext in order to use OC kernel (for emanoN ROM), if you already have it there - your device can't handle OC.
I moved it to sd-ext. I think You don't understand my problem. I can turn on phone with installed OC kernel, I can set more than 604mhz, but when I set it, after some time, when I'am doing something I just got stuck. It looks like it works, but it works not excellent. So maybe someone other can help me? It's really big problem for me, cause I love games.
Sent from my piece of **** using Tapatalk.
lietuva said:
I moved it to sd-ext. I think You don't understand my problem. I can turn on phone with installed OC kernel, I can set more than 604mhz, but when I set it, after some time, when I'am doing something I just got stuck. It looks like it works, but it works not excellent. So maybe someone other can help me? It's really big problem for me, cause I love games.
Sent from my piece of **** using Tapatalk.
Click to expand...
Click to collapse
Try to lower the frequency and find the one that is stable and works fine and smoothly...
lietuva said:
I moved it to sd-ext. I think You don't understand my problem. I can turn on phone with installed OC kernel, I can set more than 604mhz, but when I set it, after some time, when I'am doing something I just got stuck. It looks like it works, but it works not excellent. So maybe someone other can help me? It's really big problem for me, cause I love games.
Sent from my piece of **** using Tapatalk.
Click to expand...
Click to collapse
Bro either u download a new copy of ur overclock kernel or start from the beginning to flash the 2.3.4 firmware and then cwm n then parasmi's rom.. Gud luck...
lietuva said:
I'am using 748mhz parasmi OC kernel. When I set more than 604mhz after some time phone just got stuck. I'am using parasmi EmaNon rom to. What Iam doing wrong? And what I should do?
Sent from my piece of **** using Tapatalk.
Click to expand...
Click to collapse
Try the 806 kennel and overclock it to it's full extend if the problem still arise its ur farmware problem .
send from Samsung galaxy mini using cyanogen mode 7 from xda premium
debsattam said:
Try the 806 kennel and overclock it to it's full extend if the problem still arise its ur farmware problem .
send from Samsung galaxy mini using cyanogen mode 7 from xda premium
Click to expand...
Click to collapse
I think it can be firmware problem. What firmware I should use?
lietuva said:
I think it can be firmware problem. What firmware I should use?
Click to expand...
Click to collapse
First flash xxkpi so that it formats ur whole phone and then flash xxkpk..
crazy_k_p said:
First flash xxkpi so that it formats ur whole phone and then flash xxkpk..
Click to expand...
Click to collapse
I made it, but... The same probrlem... More answers?
lietuva said:
I made it, but... The same probrlem... More answers?
Click to expand...
Click to collapse
Get the 808 one and if anything don't works
Than try flashing andro id v3.2
You will get many oc for it and if that also don't works
Throw your phone out of the window lolz
Sent from my GT-S5570 using xda premium
lietuva said:
I made it, but... The same probrlem... More answers?
Click to expand...
Click to collapse
I can't understand ur problem.. Can u plz b more clear.. R u stuck at the boot screen..??
crazy_k_p said:
I can't understand ur problem.. Can u plz b more clear.. R u stuck at the boot screen..??
Click to expand...
Click to collapse
Sorry, my English is bad. No, I don't stuck at boot screen. I can turn on phone, I can overclock it, but after some time when I overclock it more than 604mhz after some time it just stucks somewhere - in opera mini, in go launcher - anywhere. Now if you understand me - help, please.
Sent from my piece of **** using Tapatalk.
Yes, that also happens for me when I set to 806mhz. (but very rarely, working fine on 787mhz though). Your phone can't handle OC.
lietuva said:
Sorry, my English is bad. No, I don't stuck at boot screen. I can turn on phone, I can overclock it, but after some time when I overclock it more than 604mhz after some time it just stucks somewhere - in opera mini, in go launcher - anywhere. Now if you understand me - help, please.
Sent from my piece of **** using Tapatalk.
Click to expand...
Click to collapse
And does ur phone restarts when it stucks there..?? There are possibly chances that ur phone cannot handle oc..
lietuva,
Well nice to see someone from the same country.... About your problem. How old is your device ? (Kiek laiko tu jau turi savo telefona?)
About 6-7 months.
Sent from my piece of **** using Tapatalk.
crazy_k_p said:
And does ur phone restarts when it stucks there..?? There are possibly chances that ur phone cannot handle oc..
Click to expand...
Click to collapse
It doesn't restart - it just stucks, nothing more. I must to restart myself by put of battery...
Sent from my piece of **** using Tapatalk.
Does OC for Andro-id work with stock gb?
If not, Are there any OC for stock gingerbread for galaxy mini? Please provide the download link....
THanks
---------- Post added at 06:36 AM ---------- Previous post was at 06:28 AM ----------
Does OC for Andro-id work with stock gb?
If not, Are there any OC for stock gingerbread for galaxy mini? Please provide the download link....
THanks
Up. Help.
Sent from my piece of **** using Tapatalk.
lietuva said:
Up. Help.
Sent from my piece of **** using Tapatalk.
Click to expand...
Click to collapse
only ppl who are using emanon rom or parasmi will be able to help u better...post in that thread.

[Q] Red light then my phone hangs

Hey, i encountered some problem, why my phone hangs and then red led light flashing Then i hv to put out my phone's battery to put my phone back on
That really scares me..
Any comments will be appreciated
Thanks!!
Sent from my E15i using XDA Freemium
You're using nAa kernel ,i have this too,nothing scary
Sent from my E15i using Tapatalk
dotsen9 said:
You're using nAa kernel ,i have this too,nothing scary
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
Thanks man, i thought i was the one who facing that problem ...
And another question..
Could it damage my X8 hardware ?
+1
I had this same problem using nAa Kernel 8 and MiniCM7-2.1.6.
I don´t know why this is happing, so i changed kernel and rom (alf`s and GingerDX).
Sory for my bad english!
Nope, it's doesn't
Sent from my X8 using Tapatalk
bruno_gui said:
+1
I had this same problem using nAa Kernel 8 and MiniCM7-2.1.6.
I don´t know why this is happing, so i changed kernel and rom (alf`s and GingerDX).
Sory for my bad english!
Click to expand...
Click to collapse
Maybe our X8 cant stand with high cpu frequency ...
Mine stable on 72x MHz ...
What about yours ?
dotsen9 said:
Nope, it's doesn't
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
Did u overclock?
sidewalk_ said:
Originally Posted by bruno_gui View Post
+1
I had this same problem using nAa Kernel 8 and MiniCM7-2.1.6.
I don´t know why this is happing, so i changed kernel and rom (alf`s and GingerDX).
Sory for my bad english!
Maybe our X8 cant stand with high cpu frequency ...
Mine stable on 72x MHz ...
What about yours ?
Click to expand...
Click to collapse
I did not made overclock, my x8 was hanging in boot, using some aplication, even in stanby. I tried flash the Kernel and ROM again, but unfortunely it happed again. Then i decided to change everything. I thought i was the only one with this problem because i searched for an thread didn´t find any.
Sory for my bad english!
Yes I overclocked, but the red light is a kernel /rom bug
Sent from my X8 using Tapatalk
bruno_gui said:
I did not made overclock, my x8 was hanging in boot, using some aplication, even in stanby. I tried flash the Kernel and ROM again, but unfortunely it happed again. Then i decided to change everything. I thought i was the only one with this problem because i searched for an thread didn´t find any.
Sory for my bad english!
Click to expand...
Click to collapse
Sooo
U change the rom and kernel?
dotsen9 said:
Yes I overclocked, but the red light is a kernel /rom bug
Sent from my X8 using Tapatalk
Click to expand...
Click to collapse
Hope it will be fixed soon

cm9 extreme screen battery drain (90%+)

hello.. ive tried flashing this rom in practically any way.. foul wipe and then install.. from cm7 or from stock rom.. after a new flash.. from cm7 without wiping.. anything.. and it started to become tiring.. on 725 bb which is said to have the best battery usage.. when i tried froyo bb i could use my phone for just 3 hours before battery was over.. any solution guys?? or any advise?
Disable Automatic brightness and adjust screen brightness manually to your liking. Should make things better.
DrummerMuppet said:
Disable Automatic brightness and adjust screen brightness manually to your liking. Should make things better.
Click to expand...
Click to collapse
didnt really work.. it still shows usage 88%..
lefterakos said:
didnt really work.. it still shows usage 88%..
Click to expand...
Click to collapse
RC said on G+ that battery usage stats on CM9 were not reliable, so don't trust what it shows:
Ricardo Cerqueira: The power profiles are wrong, those consumption distributions are meaningless.
Click to expand...
Click to collapse
flash an ironkrnl , you will see the difference (at 1,1ghz not 1,5 ^^)
vanhouche74 said:
flash an ironkrnl , you will see the difference (at 1,1ghz not 1,5 ^^)
Click to expand...
Click to collapse
how did you flash your inrkernel?? i tried but it doesnt boot.. or it boots for just a few seconds
lefterakos said:
how did you flash your inrkernel?? i tried but it doesnt boot.. or it boots for just a few seconds
Click to expand...
Click to collapse
this might be a stupid question but did you flash the ICS build of irnkrnl?
owain94 said:
this might be a stupid question but did you flash the ICS build of irnkrnl?
Click to expand...
Click to collapse
haha yes i did i found the problem.. it was an undervolting issue solved in the ironkernels G+
can you tell me what have you done? I have got the same problem and don't know how to do to solve it...
Fuse1 said:
can you tell me what have you done? I have got the same problem and don't know how to do to solve it...
Click to expand...
Click to collapse
just remove the uv96 from the zip file
Sent from my LG-P990 using xda premium
Problem solved...I was using the touch recovery version and it isn't compatible besides that i have installed the latest version of ironkrnL....it could be a problem with the previous one.
Thank you all!
lefterakos said:
just remove the uv96 from the zip file
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
CM9 is not perfect

[Q] smurf village not compatible

Hey guys i recently had a X10 where i used to play smurf village and now i want to keep playing this game but it seems not to work it loads but trying to play it freezes and phone reboots evenwhen OC any idea to make it work
chitoka said:
Hey guys i recently had a X10 where i used to play smurf village and now i want to keep playing this game but it seems not to work it loads but trying to play it freezes and phone reboots evenwhen OC any idea to make it work
Click to expand...
Click to collapse
Did you try it on a froyo ROM or a GB ROM ?
Which ROM ? Which kernel ?
chitoka said:
Hey guys i recently had a X10 where i used to play smurf village and now i want to keep playing this game but it seems not to work it loads but trying to play it freezes and phone reboots evenwhen OC any idea to make it work
Click to expand...
Click to collapse
The game might require more ram than your phone has..
Try swapping ur memory card...
http://forum.xda-developers.com/showthread.php?t=1445543
Am on stock kernel and i have primeHD 8 and it seems that swap requires another kernel!
Sent from my E15i using XDA
chitoka said:
Am on stock kernel and i have primeHD 8 and it seems that swap requires another kernel!
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yes , swap requires custom kernel which in turn means that u should unlock ur bootloader
Visit here 4 more instructions
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Sent with the help of my phalanges!!!!
I will try cause i have 11w48 and seems kinda impossible previously had 11w34 with unlock bootloader thanks for reply
Sent from my E15i using XDA
chitoka said:
I will try cause i have 11w48 and seems kinda impossible previously had 11w34 with unlock bootloader thanks for reply
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yes, u have very less chance of unlocking bootloader.
BTW it is very rude of u not pressing the thanks button
Sent with the help of my phalanges!!!!
harshitgroup said:
Yes, u have very less chance of unlocking bootloader.
BTW it is very rude of u not pressing the thanks button
Sent with the help of my phalanges!!!!
Click to expand...
Click to collapse
Sorry i've had a long day
Sent from my E15i using XDA
chitoka said:
Sorry i've had a long day
Sent from my E15i using XDA
Click to expand...
Click to collapse
mention not

Help idiot to installing costum rom on xperia x8

Ok I must say that I am idiot .... I soft bricked my phone like 5 times and now with my default kernel (flashed it) ... I have a huge battery problem and link2sd crashing problem ...
I have SE xperia x8 11w22 ...
I've been trying for 2 days to install GINGERXD on my phone ... I don't know why I can't do it ...
I installed cyanogenmod on my htc tattoo in like 2 hours with no problem .. but x8 gives me a lot of trouble ...
Right now I have default kernel on my phone ... rooted with flashtool and I have some FREEXPERIA RECOVERY... superuser app icon is android robots head with the pirate thing on his eye ...
one more thing .. how can I replace my current recovery with the clockwork one
PLEASE HELP ME WITH FULL GUIDE HOW TO DO THIS THING ( I don't want to screw up my phone :/ )!!!!!!!!
edit: I do not want to unlock bootloader ... I am scared of getting my phone hard bricked .. so if I can't install gingerxd without unlocking bootloader, please reccomend me some other good rom based on cyanogenmod that can work without unlocking bootloader
Well,you are not an idiot because you can't flash a rom!!! Calm down and everything will be fine
Did you full wipe/factory reset before installation of the rom?
For the battery problem try "wipe battery stats"
Sent from my X8 using xda premium
stamatis16 said:
Well,you are not an idiot because you can't flash a rom!!! Calm down and everything will be fine
Did you full wipe/factory reset before installation of the rom?
For the battery problem try "wipe battery stats"
Sent from my X8 using xda premium
Click to expand...
Click to collapse
+1
Op, what version of gdx are you trying to flash? Better use cwm, and do a full wipe BEFORE flashing the rom. Just search xda for the tut on how to install cwm on your x8.
Btw, gdx can run on stock kernel, so there is no need for you to unlock your bl. But out of curiousity, what's the maufacturing date of your phone?
Sent from my rooted tomato using xda app
stamatis16 said:
Well,you are not an idiot because you can't flash a rom!!! Calm down and everything will be fine
Did you full wipe/factory reset before installation of the rom?
For the battery problem try "wipe battery stats"
Sent from my X8 using xda premium
Click to expand...
Click to collapse
I don't remember ..I've tried so many thing ...
what I am gonna do right now is:
1. flash my phone to default again (with flashtool, but I won't root and install recovery in flashtool)
2. root phone with superoneclick (or that';s not the right way ? )
3. install cwm recovery ( I will search on xda for tut.)
4. put rom on sd
5. wipe factory data
5. install rom via cwm
that's it... I mean is that the way it should be done ? I'm kinda really nervous .. only thing I don't want is hard brick on my phone ...
@cascabel I have no Idea of manif. date ... tnx btw
Ok that should work
Cascabel talk about the 11w22,you have write it at the op
Sent from my X8 using xda premium
stamatis16 said:
Ok that should work
Sent from my X8 using xda premium
Click to expand...
Click to collapse
well .. I will start working right away .... tnx .. I will let you know if somrthing goes wrong ..
and one more thing . Is there any way I can hard brick my phone by doing steps I menioned in last post?
and I didn't understand this part
"Cascabel talk about the 11w22,you have write it at the op"
luka9x said:
well .. I will start working right away .... tnx .. I will let you know if somrthing goes wrong ..
and one more thing . Is there any way I can hard brick my phone by doing steps I menioned in last post?
and I didn't understand this part
"Cascabel talk about the 11w22,you have write it at the op"
Click to expand...
Click to collapse
NO,don't worry,if you do sth wrong it will be fixable
He asked you the manufacturing date,manufacturing date is 11w22
Sent from my X8 using xda premium
stamatis16 said:
NO,don't worry,if you do sth wrong it will be fixable
He asked you the manufacturing date,manufacturing date is 11w22
Sent from my X8 using xda premium
Click to expand...
Click to collapse
yup .. I saw it under the battery .. tnx a lot again ... I started flashing ...got some kind of errors but after few tries I got it done ... starting step 2
stamatis16 said:
NO,don't worry,if you do sth wrong it will be fixable
He asked you the manufacturing date,manufacturing date is 11w22
Sent from my X8 using xda premium
Click to expand...
Click to collapse
I can't believe i missed that. Sorry guys.
@op: just follow stamatis. Let us know if you have any problems. Goodluck. Sorry for confusing you.
Sent from my rooted tomato using xda app
Ok ..., I rooted my phone successfully and installed busybox but I don't know how to install cwm ... there are like 50 ways just on forum ... what is the safest way to do it ?
Every way is safe if you follow instructions.
If you are experienced user with moving things around your system,do it manual,if you want the most simple way do it with x8toolbox.
Sent from my X8 using xda premium
luka9x said:
Ok ..., I rooted my phone successfully and installed busybox but I don't know how to install cwm ... there are like 50 ways just on forum ... what is the safest way to do it ?
Click to expand...
Click to collapse
AT LAST I DID IT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
First time I bricked it ... and then I realized that I didn't install the addons ... so I downloaded STOCK version of gingerxd and stock settings .. installed both via cwm and that's it ... works like charm now
Well done
Sent from my X8 using xda premium
Awesome features .... like multitouch and "move to sd" and much more ... awesome
luka9x said:
Awesome features .... like multitouch and "move to sd" and much more ... awesome
Click to expand...
Click to collapse
Haha,most of as here who are using custom roms thinking about multitouch and app to sd like sth standard...we have forget that the phone originally doesn't have them...lol
Sent from my X8 using xda premium
stamatis16 said:
Haha,most of as here who are using custom roms thinking about multitouch and app to sd like sth standard...we have forget that the phone originally doesn't have them...lol
Sent from my X8 using xda premium
Click to expand...
Click to collapse
haha ... Tnx a lot again ... The default kernel really sucks ... :/ ...
btw can you give me some tips on saving the battery .. what apps should I use to save battery life etc ...
IAmNice said:
Dont use too much apps. No live wallpapers, low brightness and dont overclock too much. Should last 2 days
Sent from my XPERIA X8 using xda app-developers app
Click to expand...
Click to collapse
tnx, but overclocking means ?
luka9x said:
tnx, but overclocking means ?
Click to expand...
Click to collapse
changing frequency of cpu.600MHz is default but you can overclock to 768/806MHz and your phone(cpu) will be faster
fotak-x said:
changing frequency of cpu.600MHz is default but you can overclock to 768/806MHz and your phone(cpu) will be faster
Click to expand...
Click to collapse
nah I don't wanna mess with that ...
guys .. why is my phone, on google play called "VIP Sh!tEricsson x8" .. I mean .. rly ? ... Sh!t Ericsson ?
luka9x said:
nah I don't wanna mess with that ...
guys .. why is my phone, on google play called "VIP Sh!tEricsson x8" .. I mean .. rly ? ... Sh!t Ericsson ?
Click to expand...
Click to collapse
Lol. Well, i can't really argue with that.
Don't worry about it, though.
Sent from my rooted tomato using xda app

Categories

Resources