Related
OK, I've been reading here for 6 days all manner of Captivate unbricking. Here is my story...
I picked up a Captivate on the Rogers network. I connected it to my email server (Exchange 2010) with no problems, poked around, noticed the lag, noticed the SMS time issue, then promptly rooted, installed clockwork, and then threw cognition 2.2 beta 9.1.3. Quite frankly I was shocked at how much faster it was.
Anyways, after a day of poking around, I could not get my email to my exchange server running (tried the email.pak floating about), so I actually decided I was going to go back to the backup I made of my phone using clockwork before I installed cognition. When I restored my backup, I thought I had bricked my phone.
I let it rest for a day, then came back here, and found one of the 3-4 different variations of the 4 button download mode combo that permitted me to do the 1 click restore. This restored me to the AT&T version of 2.1. It worked, but was less than desirable.
I decided that at that point I really wanted to go back to stock, so I downloaded the stock backup on the Rogers Captivate wiki page, and did the restore using clockwork. The phone has not been the same since.
When i turn it on, I get an at&t splash screen, then in about 20 seconds I get the at&t "jingle", but the splash screen stays on. I can't seem to find any key combination that will permit me to get back into download mode so I can restore using the One Click that worked for me the first time. I have tried:
1. 3 button salute with USB in first, battery out initially.
2. 3 button salute with USB plugged in *as* I was inserting the battery.
3. Power and volume down (both with and without USB, and with battery being plugged in after USB and "during" insertion of battery)
4.Power and volume up with same combo's as #3.
5. Just volume up and volume down with same combo's as #3.
In all cases Odin was running before USB connected, running as administrator. I'm running 64bit windows, but I'm sure I have the correct drivers because I did this the first time with Odin and download mode and I haven't added or changed anything. But just for arguements sake I did uninstall, and then install the drivers again.
Any combination of power and volume buttons just gives me a battery charging logo. Occasionally when holding up until the second black screen I will get a quick indication that the computer might see something, but it dissappears withing a handful of seconds showing it promptly removed.
I'm downloading the Android SDK in the hopes that when I get the normal at&t splash screen after the "jingle" that something might actually be running in the background and maybe I can adb reboot download it but I'm not holding my breath.
Anyone seen this that has managed to get out of it? I'm starting to think the "unbrickable captivate" can be bricked. Assuming it is bricked, short of taking it back, is there anyone on the internet that can jtag these and in some fashion bring back to life?
Cheers,
Tim
This doesn't belong in Development.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Dani897 said:
ditto
and download mode is easy.
1. start odin3 and have data cable plugged into the computer
2. insert proper files if needed
3. hold volume up and volume down for 2 sec (no power button needed) then insert usb cable, continue to hold volumes till either the download mode screen pops up or odin3 sees the phone(if you bork the phone bad enough you can corrupt the download mode image, i did it with the not to successfull manhatten project kernel) but despite the screen being black it very well may be in download mode.
4. start flash
5. if it doesn't work send it to me ill find a use for it
alternatively if the phone can go passed the splash screens and boots fully you can adb reboot download. just get the development kit and drivers on your pc.
Click to expand...
Click to collapse
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
MikeyMike01 said:
This doesn't belong in Development.
Click to expand...
Click to collapse
Could a moderator move this to Captivate General then? Sorry about that...
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them after you plug in usb untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
timmy22 said:
Thanks, but that doesn't work. All I get is the battery charging screen. Using the process it does not go into download mode.
Click to expand...
Click to collapse
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Dani897 said:
just to be clear, you are holding volume up as well as volume down starting with the phone being powered down and continue to hold them untill something shows on the screen?
if your phone is not seeing the volumes buttons you are one of the very unlucky few that had a problem at the most inopportune moment.
there is also a way where you hold all three buttons till the phone reboots twice, or something. let me try it and ill give more specifics.
Click to expand...
Click to collapse
Yes, that's exactly correct. I do this:
1. everything pulled (battery, USB, sim, sd)
2. Open Oden (1 click)
3. Install battery
4. hold down (and keep holding) volume up and volume down
5. insert USB cable
6. depress (i.e. don't hold) power button
Goes straight to battery charging indicator.
If I swap #6 with holding the power button down, it continually reboots while just barely showing the battery charging indicator. I've tried letting go between black screens on the 1st, 2nd, 3rd, 4th, and 5th black screen. Still no android dude with the shovel.
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
newter55 said:
Pull the battery, open odin, plug usb into computer, hold vol up and down, plug usb into phone still holding vol buttons, drop in battery still holding vol buttons, when dl screen pops up and yellow com port lights up in odin release volume buttons. Do not touch power button at any time
Swyped...and sorry I don't proofread
Click to expand...
Click to collapse
Goes straight to battery charging.
johnny13oi said:
Try all the steps you stated but not the last one where you press the power button. Don't press the power button.
Click to expand...
Click to collapse
Goes straight to battery charging.
Pull out battery for 10 seconds, hold volume up + down, connect usb into other usb port.
Sent from my GT-I9000 using XDA App
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
10tonhammr said:
Have you tried rebooting into recovery mode instead of download mode? Stock recovery is adb-ready and you should be able to adb reboot download. Its a long shot if you're having problems using button combo to get to d/l mode, but it's probably still worth a shot at this point.
If you were able to use 3 button combos before all this happened, and did NOT have to install the 3 button combo fix, its strange you don't have access to it now... Could restoring a Rogers Cappy to AT&T stock be the problem?
Click to expand...
Click to collapse
Trying to get into recovery mode gets me the at&t logo and the "jingle", but no recovery mode menu to reboot, etc.
This is what I'm worried about, restoring the Rogers stock over top of the Odin 1 click restore (which is an AT&T image) has bricked it and prevents download mode from invoking.
fatttire said:
Seriously, try adb. It works wonders.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
timmy22 said:
I know, I played with adb before I bricked it. ADB needs to "see" the phone, it no longer sees it (I have three computers, all three can't see it, but they can see my friends cappy with no problems first time, every time). Same process for his phone works every time to get into download mode, but not on mine.
And yes, have tried other USB ports on the same computer, both on the mainboard, and on the front ports.
Keep the ideas coming though please, I will try every one.
Click to expand...
Click to collapse
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Merlin_reloaded said:
There's a trick to prompt download mode through a "jig" which you can hack together for about $2 in parts and a sacrificial microUSB cable...it works on the other SGSes, but I think it should work on the Captivate as well. Never tried it personally...
Click to expand...
Click to collapse
I work in a tech shop so have access to electronics, sacrificial cables, soldering irons, resistors, caps, etc.... could you point me in the right direction?
Oh, nevermind, found it in the i9000 forum. Will test first thing in the morning!
Cheers,
I bricked one today as well. Exactly what you are talking about here. The only thing is that i was still under the 30days so i swapped it out for a new one. As of right now ive been debating whether i want to do the voodoo fix (which i think is what bricked it to begin with)
So here is the situation:
My power button is non-functional. This happened before, and I was able to press very firmly on the power button to access a shut down menu and turn off the phone. From this, I was able to enter download mode (pressing volume button while inserting USB) and go back to stock, which surprisingly, fixed my power button. I thought this nightmare was over.
Now, my power button has stopped working again (ICS hacksung 5.0). No matter how much pressing, prodding, whatever, I cannot get the power button to turn off the phone.
I cannot find any adb commands to turn off phone.
"adb reboot download" simply restarts the phone, no download mode. (adb does recognize the device)
If I take out the battery, as soon as I put it in the phone boots up.
If I am pressing any of the volume buttons when I put the battery in, I can access recovery mode (But cannot select anything because power button is still broken)
Any ideas? I doubt my phone is still under warranty (1.4 years old) and I do not have mobile insurance.
Thanks for any help in advance
Depending on what recovery u have (cwm or ?), U can use the capacitive buttons, while in that revovery, to navigate and select the power off option.
Sent by XDA Premium App
Thats a neat tip that I didn't know about, but I can't find any option to power off? Sorry for being retarded but I have given this time I promise
cwm recovery is what I have installed atm
Reboot to CWM and Power off option may be at the bottom of the 1st screen that u come to. That is dependent on what version of cwm u have though.
Quick boot from the market, you can place a poweroff button directly on the home screen
Sent from my SAMSUNG-SGH-I897 using xda premium
The ICS ROMS CWM recovery doesn't have power off choice, so he can't do that.
Sent from my SGH-I897 using xda premium
Unfortunately the quick boot "power off" option simply froze my phone, or restarted it.
I let my battery drain so that I could get a dead phone (that part worked), but when I hold my volume buttons and plug in the USB for download mode it goes to the "battery" screen or (if both are held down) recovery. No download mode.
In recovery "key test" the power button fails to register any key press, but it is not spamming either. This seems like a hardware problem, but I am not sure how it was fixed when I flashed back to stock before if that is the case
I will next try making a download mode jig, I'll let you guys know how it goes...
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
its a far shot but odin is now available for use on the phone itself and works on our phones. maybe you can find a kernel thats had the buttons reconfigured. i know darky has one somewhere.
StaticMatt said:
My cousin had the exact same problem less than a month ago.
I see you tried reboot download through adb, have you tried it using the same command, but using android emulator from market? That worked for her phone so worth a shot.
Click to expand...
Click to collapse
Thanks for this idea, when I use
#su
#reboot download
the phone simply reboots. Same thing happens in "Quick Boot" 's "Bootloader" reboot option. This phone just seems broke as hell.
Firstly, this power button problem is a lot more common than you would think. It is most often a hardware failure - I mean the button mechanism (springs etc. just dies). Google it to see how common.
Your post suggests a clue: If just putting the battery in reboots the phone, then the power button may be stuck in the "in" position.....so it is always getting "pushed". Then anything you do would mean ht epower button is already being pressed. If this is the case, you will never get a software solution ???
Also, I absolutely do not mean to be nasty. But if you search both Q&A and General sections there are previous threads with this button problem. Many other solutions have been posted and it will be difficult to list them together.
Finally, you can actually replace - yes, replace - the button yourself. Google/you tube has it.
http://www.globaldirectparts.com/Samsung-Captivate-i897-Replacement-Repair-Parts-s/6412.htm
http://forum.xda-developers.com/showthread.php?t=1206459
Hope this helps !
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
bunnsguy said:
Power everything was working this morning
Noticed that my power button wasn't working...the screen stayed on. Pulled battery, put it back in and the phone booted without pressing power.
Was like "wtf?"
When it booted, I couldn't turn off the screen.
So I just left the battery out and took it home.
Put a new rom on phone, thought "This will fix it."
Wrong.
Had to flash using Rom Manager because in recovery the power button doesn't respond.
When it began to boot "AT&T Screen" wouldn't disappear and show me some Doc's v4.
I can manipulate it to boot into recovery but the power button doesn't work still.
I can NOT get it to go into recovery.
Can someone helps me?
Click to expand...
Click to collapse
have ODIN open, and battery removed from phone... hook up usb, hold both vol keys, while inserting battery... you should get download mode fine even with a busted power button... what you do next is up to u....
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
bunnsguy said:
Once more, I can NOT get it to boot into recovery in that fashion.
I cannot place batter in the phone without it attempting to boot
(doesn't not get past the AT&T boot screen)
I cannot plug it up, hold volume buttons and then put in battery because it will just charge. If I unplug the phone, the phone still thinks it's charging actually.
My question really is Can I 'fix' the power button, or can I reboot it into download mode through command propt? I've never used ADB to access my phone, so that'll be new.
Click to expand...
Click to collapse
Dude... recovery is useless right now, you have a busted power button... and because of 'said busted power button', none of what you're trying to do is going to work... like youve said...
You are down to trying to force download mode with USB cord, holding the vol keys, and inserting the battery... ADB cannot run commands to a phone stuck at the boot screen... Thread title says, how to reboot to download, and with the button like it is, all you can do is what i've posted...
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
B-Naughty said:
As to fixing the power button, i don't see why that's not possible... do u feel it press at all?
Click to expand...
Click to collapse
Yeah, it 'presses' and 'clicks'. I mean it worked most of the day, it got low on power and it just quit working.
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
B-Naughty said:
Any luck forcing download by puttin the battery in while the usb is hooked up with the vol keys pressed in?
Click to expand...
Click to collapse
goes into boot-loop like if I were holding the volume up/down and the power together. That's what doesn't make sense.
j.curtis.369 said:
I was having the same problem with my power button and eventually the power button stopped working completely even though i could still hear it click. I sent it to mobiletechvideos and they fixed it really fast and it was a great price.
Here's the link: http://mobiletechvideos.mybigcommerce.com/samsung-captivate-power-button-repair/
Click to expand...
Click to collapse
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
It happened to me once before after flashing a bad kernel. I just did what B-Naughty had suggested. Remove battery -> plug in USB -> hold both volume buttons --> then insert battery. Put me right in download mode and Odin it back with a working power button. Unless it's really a hardware problem, then you're out of luck...
bunnsguy said:
And I could buy another used Captivate for $50. I have an upgrade in less than 3 weeks and this happens
Click to expand...
Click to collapse
Oh in that case imo i would get another used captivate and wait for the sgs 3
Maybe if I went to a store and sucked up to them they'd let me upgrade a month early (especially since I was initially supposed to upgrade in October)
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
B-Naughty said:
Might be down to getting/making a USB jig if it don't come up... but if you upgrade to gs2, the jig will work for that model as well so won't be wasted...
Click to expand...
Click to collapse
Maybe a jig would work. But easier, funner solution is adding a line for a Moto Atrix 1 for just a penny plus the $36 fee. Problem solved. Thanks for the help for what could just be a hardware failure. I'll upgrade my other line later when the SGS 3 comes out
Hello everybody,
First of all, please forgive my time to time poor english. I tried to fill in my presentation and hope it's ok.
I also want to thanks all the developpers that make a great job to optimise and/or improve stock roms and to help people like me that are not so good in developping.
Let me explain my problem :
I've just bought the Samsung note 9 SM-N960F/DS I was dreaming of.
when I put my sim card inside (a french one) he went on a firmware update, and my phone changed for a french CSC (XEF). Thus, I losed some functions I like, such as SpO2 measure in Samsung Health (I know, it's not so important but...). I couldn't also force the sound in earplugs when phone whas ringing, even by using "Soundabout apk" that was working with my note 4....
I don't know why Samsung changes the available functions regarding the country as we pay the same price for in fact a bunch of functions !!!
I tried to come back to the initial CSC, by flashing an official rom, and following a tutorial on XDA site explaining how to do without rooting, using combination files.
But I certainly made an error as my phone has restarted in a curious mode named "kernel panic upload mode" that I cannot escape. It's impossible to go back to download mode, even with combo like vol down + start button, or other combinations of buttons.
This phone wasn't rooted and i'm afraid now as I don't know how to flash a working rom on it. Whem I use Odin, the flashin fails at beginnig (at setup connection step).
Does somebody have an idea or a solution to fix this phone?
I join some picture of the current state.
Thanks for your answers
Azur26
Are you able to get into recovery mode using the button combo?
enzyne said:
Are you able to get into recovery mode using the button combo?
Click to expand...
Click to collapse
Hello Enzyne,
Thanks for your help !
I tried Vol up + Bixby + start, vol down + bixby + start, vol up + start, vol down + start, vol up + vol down + start, but nothing works.
I can't go back to recovery mode nor to download mode...
Odin says "added" but can't setup connection...
Have you flashed with this PC before using Odin? Can you possibly try another PC? Maybe different USB cables just to eliminate possibilities.
enzyne said:
Have you flashed with this PC before using Odin? Can you possibly try another PC? Maybe different USB cables just to eliminate possibilities.
Click to expand...
Click to collapse
I used stock cable, given with the phone.
I gonna try with another one, and on anotehr PC... Maybe will I be lucky... But i'm not optimitic...
It could be that the drivers are no good. It is also possible that you may need a warranty exchange. I'm not aware of any other boot-loader level recovery process besides odin. Maybe even try another version of odin that is known to work with our note 9.
enzyne said:
It could be that the drivers are no good. It is also possible that you may need a warranty exchange. I'm not aware of any other boot-loader level recovery process besides odin. Maybe even try another version of odin that is known to work with our note 9.
Click to expand...
Click to collapse
Thanks for your help Enzyne,
Other cable/PC didn't work...
Gonna try with other odin !
azur26 said:
Thanks for your help Enzyne,
Other cable/PC didn't work...
Gonna try with other odin !
Click to expand...
Click to collapse
Other odin doesn't work :crying:
even with updated samsung drivers... :crying::crying::crying:
The Kernel Panic Upload Mode doesn't prevent the phone from booting to Recovery.
1. Make sure your phone is completely powered off.
2. Press and hold the Bixby button and the Volume up button.
3. Press and hold the Power button. At this point you should be holding down three buttons. Don't let these go until you see the Recovery screen pop up.
That's really all there is to it. If you have a case that goes over your buttons it's possible you aren't pressing down hard enough for one or more of the buttons to register.
Chaos Residue said:
The Kernel Panic Upload Mode doesn't prevent the phone from booting to Recovery.
1. Make sure your phone is completely powered off.
2. Press and hold the Bixby button and the Volume up button.
3. Press and hold the Power button. At this point you should be holding down three buttons. Don't let these go until you see the Recovery screen pop up.
That's really all there is to it. If you have a case that goes over your buttons it's possible you aren't pressing down hard enough for one or more of the buttons to register.
Click to expand...
Click to collapse
Not to nit-pick,but,when the phone is fully powered down,the simultaneous 3-button push can be released as soon as you see the Note 9 splash screen & the recovery screen should pop-up within a few seconds.
Only reason I mention it is possibly the OP is experiencing issues by holding one or more of the buttons in too long,(just spit-ballin' here on this point)............
KOLIOSIS said:
Not to nit-pick,but,when the phone is fully powered down,the simultaneous 3-button push can be released as soon as you see the Note 9 splash screen & the recovery screen should pop-up within a few seconds.
Only reason I mention it is possibly the OP is experiencing issues by holding one or more of the buttons in too long,(just spit-ballin' here on this point)............
Click to expand...
Click to collapse
Hi Koliosis, and thanks for your help.
In fact, I even cannot power down the phone !!!
The only thing he does except showing kernel panic is to quickly flash on samsung splash screen when I push together vol down and power button, before to go back on panic kernel screen:crying:
No splash screen with bixby + vol up + power buttons combo...
The problem came after a failed flash with combined files (the good ones for my phone, I verified...)
Is there another way to reinitialise the phone except via Odin or Smart switch?
azur26 said:
Hi Koliosis, and thanks for your help.
In fact, I even cannot power down the phone !!!
The only thing he does except showing kernel panic is to quickly flash on samsung splash screen when I push together vol down and power button, before to go back on panic kernel screen:crying:
No splash screen with bixby + vol up + power buttons combo...
The problem came after a failed flash with combined files (the good ones for my phone, I verified...)
Is there another way to reinitialise the phone except via Odin or Smart switch?
Click to expand...
Click to collapse
You got me there, I haven't used ODIN since the Note 5 days, LOL. (FWIW, I boot to recovery for cache wipe, otherwise, that's as deep as I've gotten into a Samsung device for quite some time).
Sent from my SM-N960U using XDA Labs
KOLIOSIS said:
You got me there, I haven't used ODIN since the Note 5 days, LOL. (FWIW, I boot to recovery for cache wipe, otherwise, that's as deep as I've gotten into a Samsung device for quite some time).
Sent from my SM-N960U using XDA Labs
Click to expand...
Click to collapse
I think it won't be enough in my case...
Thanks Koliosis to have answered
azur26 said:
I think it won't be enough in my case...
Thanks Koliosis to have answered
Click to expand...
Click to collapse
Oh, I know, LOL, a cache wipe definitely isn't a cure all. :laugh:
Good luck in getting back up & running soon.
Sent from my SM-N960U using XDA Labs
KOLIOSIS said:
Oh, I know, LOL, a cache wipe definitely isn't a cure all. :laugh:
Good luck in getting back up & running soon.
Sent from my SM-N960U using XDA Labs
Click to expand...
Click to collapse
I cross all I can !!!:fingers-crossed::fingers-crossed::fingers-crossed:
To get the Note 9 into download mode, do the following:
Turn the device off. Hold the volume down and Bixby button together and then plug in your USB cable that is attached to your PC. Your phone should go into download mode.
As this requires the phone to be off, you may get lucky once the battery runs out of charge.
Good luck
Sent from my SM-N960F using Tapatalk
KOLIOSIS said:
Not to nit-pick,but,when the phone is fully powered down,the simultaneous 3-button push can be released as soon as you see the Note 9 splash screen & the recovery screen should pop-up within a few seconds.
Only reason I mention it is possibly the OP is experiencing issues by holding one or more of the buttons in too long,(just spit-ballin' here on this point)............
Click to expand...
Click to collapse
I've never had an issue with holding the buttons too long, but I have had an issue with not holding them long enough. I let go of the buttons as soon as the Recovery screen comes up and I haven't once had an issue with that. I think he'd have to hold the buttons for several seconds past the Recovery screen booting up before this caused an issue.
azur26 said:
Hi Koliosis, and thanks for your help.
In fact, I even cannot power down the phone !!!
The only thing he does except showing kernel panic is to quickly flash on samsung splash screen when I push together vol down and power button, before to go back on panic kernel screen:crying:
No splash screen with bixby + vol up + power buttons combo...
The problem came after a failed flash with combined files (the good ones for my phone, I verified...)
Is there another way to reinitialise the phone except via Odin or Smart switch?
Click to expand...
Click to collapse
Okay, now we're on the same page. You have to be FAST with this.
1. Plug in a charging cable. This will give you the LED charging indicator on your phone.
2. Hold Power+Bixby until the charging indicator turns off. Once the charging indicator turns off you have to be VERY quick with step 3.
3. Press and hold Power+Bixby+Volume Up until you see the Recovery screen.
I was stuck in a bootloop after installing a Magisk module, and this happened to me as well. Every time I would power the phone down it wouldn't stay powered down. I had to be very fast to get into Recovery. It took me a couple of tries to press and hold the buttons quickly enough. That was partially because the case on my phone made pressing the buttons a bit more difficult.
Painman1963 said:
To get the Note 9 into download mode, do the following:
Turn the device off. Hold the volume down and Bixby button together and then plug in your USB cable that is attached to your PC. Your phone should go into download mode.
As this requires the phone to be off, you may get lucky once the battery runs out of charge.
Good luck
Sent from my SM-N960F using Tapatalk
Click to expand...
Click to collapse
Chaos Residue said:
I've never had an issue with holding the buttons too long, but I have had an issue with not holding them long enough. I let go of the buttons as soon as the Recovery screen comes up and I haven't once had an issue with that. I think he'd have to hold the buttons for several seconds past the Recovery screen booting up before this caused an issue.
Okay, now we're on the same page. You have to be FAST with this.
1. Plug in a charging cable. This will give you the LED charging indicator on your phone.
2. Hold Power+Bixby until the charging indicator turns off. Once the charging indicator turns off you have to be VERY quick with step 3.
3. Press and hold Power+Bixby+Volume Up until you see the Recovery screen.
I was stuck in a bootloop after installing a Magisk module, and this happened to me as well. Every time I would power the phone down it wouldn't stay powered down. I had to be very fast to get into Recovery. It took me a couple of tries to press and hold the buttons quickly enough. That was partially because the case on my phone made pressing the buttons a bit more difficult.
Click to expand...
Click to collapse
Thanks to you both
Doesn't work as well :crying:
Is there another way to force connection with the PC in order to flash a rom again? Another "magic" application like odin but more powerfull?
The only thing that im aware of is very legacy like QPST. Im not sure if QPST is able to handle the newer phones tho. You can definitely ruin your phone with it too.
Hi again Enzyme
I looked on Google for QPST. But it seems it's only for Qualcom powered phones... mine is Exynos powered. ..
... The screen went black and unfortunately is still black so I'm assuming the phone died.
-It's been 30 minutes now and counting
1. should I buy another one? Or
2. should I buy a different phone?
3. What are your suggestions?
EDIT: My phone is back on. I don't know what turned it off in the first place. Power button didn't work (short or long press). Fastboot mode (button combination) didn't work.
FIX: Hard (ware) Restart - Hold down Volume up, volume down, and power simultaneously for about a 15 count. Screen came back on ?
Thank you all for your feedback
Just happened to mine too. why did it do that. did your ever do that again?
It happened to mine Saturday night, I pressed the UP + POWER button and came back on, probably a sw glitch, I had put AUTO UPDATE on, I turned it off.
Thanks 4 the heads up save me from having to send it off to get it fixed.
same thing just happened to my phone, holding both up and down plus power button for 15 seconds got it back up, what caused this?
Phone didn't even want to charge when it was off. or connect to pc
vol up + vol down + power button is the way to exit EDL mode. I think it will help you.
Try disable the pocket mode and lift to display. It causes this issue in the latest update.
Hi everyone
Same issue here and its happening too often. Like 4 times this week. Super annoying. Old thread with same issue exists and the issue was solved by disabling the finger print unlock but after latest update its same isse. @lavenderyew suggestion above didnt work as i already have that disabled.
baddar said:
Hi everyone
Same issue here and its happening too often. Like 4 times this week. Super annoying. Old thread with same issue exists and the issue was solved by disabling the finger print unlock but after latest update its same isse. @lavenderyew suggestion above didnt work as i already have that disabled.
Click to expand...
Click to collapse
hello the same thing happens to me, could you solve it? thanks
I've also just experienced this issue since yesterday. So far no button combination works
Kitharn said:
I've also just experienced this issue since yesterday. So far no button combination works
Click to expand...
Click to collapse
Any luck?
My ROG phone ii just stopped working and wouldn't charge as well,,
I have tried the (volume up volume down with power key) but also didn't work..
Any advice please
Alsheikhy said:
My ROG phone ii just stopped working and wouldn't charge as well,,
I have tried the (volume up volume down with power key) but also didn't work..
Any advice please
Click to expand...
Click to collapse
Try connecting the phone to a PC through the side port. While connected, hold the power button for about 15-20 seconds. Do you hear a sound from the PC like it's disconnecting from USB and then connecting again after a couple of seconds? If so, let me know and I will put together some instructions, as I have just got mine sorted from this scenario.
gabi.ailincai said:
Try connecting the phone to a PC through the side port. While connected, hold the power button for about 15-20 seconds. Do you hear a sound from the PC like it's disconnecting from USB and then connecting again after a couple of seconds? If so, let me know and I will put together some instructions, as I have just got mine sorted from this scenario.
Click to expand...
Click to collapse
This is exactly what mine is doing. My computer makes the sounds for connecting and disconnecting, but no 'life' visible on the phone
gabi.ailincai said:
Try connecting the phone to a PC through the side port. While connected, hold the power button for about 15-20 seconds. Do you hear a sound from the PC like it's disconnecting from USB and then connecting again after a couple of seconds? If so, let me know and I will put together some instructions, as I have just got mine sorted from this scenario.
Click to expand...
Click to collapse
Yes I tried, the PC is making the connect and disconnecting sound, the sound came when I pressed the hole buttons not only the power
Kitharn said:
This is exactly what mine is doing. My computer makes the sounds for connecting and disconnecting, but no 'life' visible on the phone
Click to expand...
Click to collapse
If you can connect through fastboot, I suggest downloading a RAW version and reflashing using that one, as it's the easiest approach. If you can't connect through fastboot (the "fastboot devices" command doesn't return any devices), try the following:
1. Download this file. It contains the firmware images and some utilities, which we'll need to use.
2. Extract the zipped folder wherever you want on your PC.
3. Download and install the Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip from here. You should be asked to reboot, but if you are not, you'll need to reboot.
4. Open the XiaoMiFlash.exe tool and use the Select button to select the "images" folder that you extracted.
5. Make sure that your phone appears in the list underneath and shows up as being in Download Mode. If not, try using the "refresh" button until the phone appears. If the phone doesn't appear to be in Download Mode, try holding the power button, while the phone is still connected to the PC, until you hear it disconnect the USB and then reconnect - this should put the phone in Download Mode.
6. Click on the "flash" button and let the process finish. You will know that it progresses, as it starts pretty quickly to flash images one by one. If the flashing doesn't start, try rebooting and retrying and if this doesn't work, reinstall the Qualcomm drivers and try again.
7. If the flashing status shows as complete, hold the volume up, volume down and power buttons (yes, all 3) until the phone shuts down.
8. Hold the volume up and power buttons pressed, so that the phone starts to the bootloader, then use the volume rocker to scroll to the "recovery" option and select it with the power button.
9. When in Recovery mode, use the volume rocker to scroll to the "wipe data" option and select it with the power button.
10. Select "reboot system" once the wiping is done.
This should be it. Let me know if something doesn't work.
---------- Post added at 10:03 PM ---------- Previous post was at 10:00 PM ----------
Alsheikhy said:
Yes I tried, the PC is making the connect and disconnecting sound, the sound came when I pressed the hole buttons not only the power
Click to expand...
Click to collapse
It's enough to press the power button to get it to reboot, there should be no need to press all of them. I've just posted another reply on this thread with some instructions. See if those help you get it back and let me know if you need any help.
Well done that your problem has been fixed
gabi.ailincai said:
If you can connect through fastboot, I suggest downloading a RAW version and reflashing using that one, as it's the easiest approach. If you can't connect through fastboot (the "fastboot devices" command doesn't return any devices), try the following:
1. Download this file. It contains the firmware images and some utilities, which we'll need to use.
2. Extract the zipped folder wherever you want on your PC.
3. Download and install the Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip from here. You should be asked to reboot, but if you are not, you'll need to reboot.
4. Open the XiaoMiFlash.exe tool and use the Select button to select the "images" folder that you extracted.
5. Make sure that your phone appears in the list underneath and shows up as being in Download Mode. If not, try using the "refresh" button until the phone appears. If the phone doesn't appear to be in Download Mode, try holding the power button, while the phone is still connected to the PC, until you hear it disconnect the USB and then reconnect - this should put the phone in Download Mode.
6. Click on the "flash" button and let the process finish. You will know that it progresses, as it starts pretty quickly to flash images one by one. If the flashing doesn't start, try rebooting and retrying and if this doesn't work, reinstall the Qualcomm drivers and try again.
7. If the flashing status shows as complete, hold the volume up, volume down and power buttons (yes, all 3) until the phone shuts down.
8. Hold the volume up and power buttons pressed, so that the phone starts to the bootloader, then use the volume rocker to scroll to the "recovery" option and select it with the power button.
9. When in Recovery mode, use the volume rocker to scroll to the "wipe data" option and select it with the power button.
10. Select "reboot system" once the wiping is done.
This should be it. Let me know if something doesn't work.
---------- Post added at 10:03 PM ---------- Previous post was at 10:00 PM ----------
It's enough to press the power button to get it to reboot, there should be no need to press all of them. I've just posted another reply on this thread with some instructions. See if those help you get it back and let me know if you need any help.
Click to expand...
Click to collapse
I've just received a PM from someone saying that this helped and I wanted to give credit to the thread from which I got the solution:
https://forum.xda-developers.com/rog-phone-2/how-to/repair-rog2-phone-edl-modeofficial-t4012175/amp/
The solution from that thread didn't really fit my situation, hence why I changed the steps a bit. Maybe that solution helps someone else.
When i try this method, it flashes the first part (i get a green bar) and then has an error directly after that.
From looking at the XiaomiFlash logs, "set boot partition failed"
gabi.ailincai said:
Try connecting the phone to a PC through the side port. While connected, hold the power button for about 15-20 seconds. Do you hear a sound from the PC like it's disconnecting from USB and then connecting again after a couple of seconds? If so, let me know and I will put together some instructions, as I have just got mine sorted from this scenario.
Click to expand...
Click to collapse
nope. still stuck with that blinking red led light unresponsive rog 2 phone. :crying: