~ FAQ | LG GT540 REFERENCE THREAD ~
.:: http://mygt540.com ::.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
~ o ~
LG GT540 is equipped with 512Mb ROM (flash memory).
It is divided into sections: * Boot (boot partition | 5 MB) - contains the kernel of linux system and the ram-disk image
* System (system partition | 245 MB) - contains built-in Android applications
* User (userdata partition | 138 MB) - contains custom applications / settings
* Cache (cache partition | 64 MB) - unnecesary files you need to clean often
~ o ~
START | NEWBIE
[HOW-TO] Set up SDK/ADB/FASTBOOT on Ubuntu 11.04
[HOW-TO] Set up SDK/ADB/FASTBOOT on Windows | Flash Android ROMs 2.1/2.2/2.3
[HOW-TO] Create a EXT4 & SWAP partition on Windows / Linux
[HOW-TO] Use ADB tool | Android Debug Bridge
[HOW-TO] Install LG IME Full
[HOW-TO] Change default fonts | Custom ROMs
[HOW-TO] Use Fastboot tool | Bootloader
[HOW-TO] Replace Files | Set permissions
__________________________________________________
RESTORATION | ADVANCED
[FAQ] My Phone is bricked !!! | GUIDE
__________________________________________________
TECHNICAL TRICKS
[TUTORIAL] Self-Assembly of Android OS Firmware
[TUTORIAL] Data2System method by Anton_ch | Custom ROM's
[HOW-TO] Fix MD5 mismatch | Nandroid restore
[HOW-TO] Fix Russian Profile | Swiftdroid
[HOW-TO] Change default low system sounds | Sound Scheme
~ Please user DO NOT POST IN HERE, LET'S KEEP THE THREAD CLEAN, PM me if you have a question or something to say. Thanks! ~
are Welcomed!!!
[HOW-TO] Set up SDK/ADB/FASTBOOT on Ubuntu 11.04
TUTORIAL #1
THANKS TO bloodychaos FROM XDA
I've been searching around the forums,the stickies and Google on how to install ADB in Ubuntu from scratch but I wasn't able to get a guide anywhere. What I found mostly are for Windows or little bits and pieces of info which did not cover the whole thing. Which is when I decided to grab some Tab and Mountain Dew, and Google my way through to make it work and share it to those who had trouble or no idea how to install it on Ubuntu.
When I'm writing this, I'm using Ubuntu 10.10 64bit to install and run everything. There was mentions of using Eclipse SDK while searching around, but I won't be touching on that. There's another guide for it at the end of my guide. I have yet to encounter any problems while using ADB in 64bit environment. I've tested it out on the 32bit platform as well and it works. It'll also work on SD and NAND versions of Android for the HD2, since it's my main phone. Also, this is my first time making a guide, so bear with me if there's any mistakes. I've checked the article a few times hoping that it's clear and easy to understand.
Step 1. Install JDK
You'll need to install JDK for ADB to work. If you have already installed JDK, I recommend reinstalling it again, just in case there are new updates or you have the older version.
Open Terminal and enter the following command(s), then enter your ubuntu login password followed by ‘y’ when prompted for yes/no.
Code:
$ sudo apt-get update
$ sudo apt-get install openjdk-6-jdk
Step 2. Download and Install Android SDK
Download the Android SDK. Obviously, choose the one for linux (android-sdk_r10-linux_86.tgz)
Code:
http://developer.android.com/sdk/index.html
Extract the android-sdk-linux_x86 folder from android-sdk_r10-linux_x86.tgz and put folder to your desired location. I recommend to put in home/username/ | When using the terminal the same path is described as ~/
Step 3. Choose packages to install
First of all go to ~/android-sdk-linux_x86/tools/
Right clic to android >> Properties >> Permissions
Make sure "allow executing file as a program" it's checked
In Terminal, type the following
Code:
$ cd ~/android-sdk-linux_x86/tools
$ ./android update sdk
The 'Android SDK and AVD Manager' window will appear (screencap below). If you are not a developer then just accept the first option to install and the rest reject. Once installation is finished, it will prompt you to restart the manager. Just click 'Yes' and close the manager
Step 4. Check your device's permission
Now head over to the platform-tools directory
Code:
$ cd ~/android-sdk-linux_x86/platform-tools
Check if you have permission for your device
Code:
$ ./adb devices
If you're getting the following, go on to Step 5.
Code:
List of devices attached
???????????? no permissions
If you're getting something like this or other random numbers with the word device next to it, congrats! You now could use ADB. Now go on to Step 7.
Code:
List of devices attached
0123456789ABCDEF device
Step 5. Giving permission to your device
You'll need to create a certain udev rule. First off type the following in Terminal:
Code:
$ sudo gedit /etc/udev/rules.d/99-android.rules
Once the gedit window pops-up, type the following line
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1004", MODE="0666"
SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE="0666"
Here's a list of each vendor's ID. Source: http://developer.android.com/guide/developing/device.html
Save the file and exit out of gedit. Back in Terminal execute the following
Code:
$ sudo chmod a+rx /etc/udev/rules.d/99-android.rules
$ sudo restart udev
$ sudo adb kill-server
Then unplug your phone and plug it again
Now to check if it works
Code:
$ ./adb devices
You should be getting the following line or something similar:
Code:
List of devices attached
0123456789ABCDEF device
Congrats! Now you can use ADB in Ubuntu! Now hop on to Step 6!
Step 6. Create path for ADB and Fastboot
NOTE: while using adb in Linux, you'll need to type ./adb to execute adb unless you create a path in ~/.bashrc.
Code:
$ sudo gedit ~/.bashrc
Add the following line at the very end of the file. Once you're done, save and exit.
Code:
# Android tools
export PATH=${PATH}:$HOME"/android-sdk-linux_x86/tools"
export PATH=${PATH}:$HOME"/android-sdk-linux_x86/platform-tools"
Then in a Terminal run this command to reload your .bashrc:
Code:
source ~/.bashrc
Now you can just run adb without put ./ before every command.
Step 7. Set up FASTBOOT
Download Fastboot file from here: http://www.mediafire.com/?uc8zvuoklr8qlmk
Move it to ~/android-sdk-linux_x86/tools/ folder
Right clic to Fastboot >> Properties >> Permissions
Make sure "allow executing file as a program" it's checked
Reboot in fastboot mode (bootloader), then plug your phone with USB cable to a computer
Open a terminal and type:
Code:
$ sudo -s
# fastboot devices
0123456789ABCDEF fastboot
NOTE: you must login as root to fastboot to work. If you get an error issuing the last command then most likely something went wrong while creating a path for fastboot in ~/.bashrc, then you should try with ./ statement before the command like this:
Code:
# ./fastboot devices
0123456789ABCDEF fastboot
__________________________________________________
* For more in-depth guide, try HowtoForge. Just found this guide today and I find it VERY useful and even have a good guide on Eclipse.
[HOW-TO] Set up SDK/ADB/FASTBOOT on Windows | Flash Android ROMs 2.1/2.2/2.3
TUTORIAL #2
HELLO I SEE THERE IS QUITE OF PEOPLE (NEWBIES) THAT ARE HAVING PROBLEMS WHILE FLASHING, MOST OF THE TIMES FROM STOCK 1.6 TO 2.1, SO I WANTED TO SHARE THIS TUTORIAL I MADE AND WOULD LIKE TO ALL OF YOU CONTRIBUTE IN SOMETHING MISSING OR NEW THINGS FOR THIS TUTO AND MAKE IT THE UPDATED AND BEST TUTO FOR DUMMIES OUT THERE . NO OFFENSE . JUST THAT THERE ARE LOTS OF PEOPLE NOT FAMILIARIZED WITH THIS KIND OF STUFFS.
THANKS TO CHKRLY FROM TARINGA! FOR THE BASIS OF THIS TUTORIAL, i added and quit some parts, translated and attached files...
WARNING: Any of these methods can brick your phone, im not responsible if that happens. READ ALL THE TUTORIAL FIRST. If your phone gets unresponsive DO NOT PANIC! we are here for HELP!
FIRST PART
(Flash from 1.6 to 2.1 with fastboot)
In this part we are going to flash an european ROM that comes with fastboot with the purpose of flash other ROMs that needs fastboot later...
1. Create a folder, download the KDZ Updater , the European ROM and the drivers for our LG GT540 and unzip them all in the same folder.
Install KDZ
Deactivate your FIREWALL and Antivirus if necessary
Install drivers:
UPDATE: Thanks to eoghan2t7 you can install LG GT540 drivers all in one:
METHOD1: NEW
LGGT540 ALL IN ONE DRIVER PACK.exe (32 bits users only)
METHOD2: OLD
Or install the drivers in the old normal way (32 & 64 bits users)
WINDOWS7 users: Right clic>> Run as administrator.
Also is very important you install the drivers inside the LG_SmartPhone folder:
2. On to the phone go to: SETTINGS >> APPLICATIONS >> DEVELOPMENT and activate the mode USB debugging , also check out this:
SETTINGS >> SD CARD AND PHONE MEMORY >> EXTERNAL ONLY MEMORY (not SECRET_, remove if), then plug you phone to the computer
3. Close all applications you do not need on the computer and run the KDZ_FW_UPD.exe (Windows 7 users: right clic>>start as Administrator)
4. Once in the program select from the TYPE list the 3GQTC option and then clic in the folder icon and select the European ROM(KDZ file) from the folder where you unziped, then press the button Launch Software Update
NOTE: It is important mention that while in the process dot not interrupt the program, unplug the phone or shutdown the computer
*If it stops in any of the processes and doesn't finish (processes doesn't get stuck for long), then unplug your phone, close the program, open it again plug your phone, and run it again.
*If that doesn't help eather, remove the battery, close the program, plug your phone to the computer, start the program and run the process again.
NOTE: various problems in the following procedure to update can occur if non of the above tips helped then try this:
Go to Device Manager in your computer>> right click on the LG Modem Android>> DISABLE / Modem>> LGE Virtual Modem>> DISABLE and then try FLASHING AGAIN
THE WHOLE PROCESS SHOULD TAKE 10 MINUTES
Once the program has loaded the ROM to the phone it will appear a leyend FINISHED, after that the phone will reboot and boot android 2.1 with fastboot.
SECOND PART
(Flash from stock 2.1+fastboot to custom 2.1/2.2/2.3...)
1. Download the following files:
- Google SDK tools, unzip and put the folder in C:\ drive
- Drivers for your computer recognize the phone in fastboot mode. Unzip and put the files inside the folder in C:\android-sdk (take a look of the 3th image)
INSTALL WITH YOUR PHONE PLUGGED:
... then next and it will install the drivers.
- Clockwork recovery (latest version) and place it in C:\android-sdk
- Download the ROM you want to flash for FASTBOOT NOT RECOVERY, UNZIP and place the .IMG FILES in C:\android-sdk
NOTE: It is RECOMMENDED that from stock 2.1 you flash to 2.2 and then to 2.3 and so on, this means not go directly to 2.3.3 as may cause your phone do not boot properly and also not login to recovery. This is not confirmed but some users have experienced this kinds of issues.
2. Shutdown your phone and Start it in fastboot mode (CAMERA+POWER BUTTON) hold the camera for 1 sec then add the power button . Wait few second you will see LG's logo then the screen will turn dark, CLEAN DARK SCREEN, just in that moment you are in FASTBOOT mode.
3. Flash rom by FASTBOOT mode:
Plug your phone to the computer and open a CMD terminal and type:
Code:
cd C:\android-sdk
4. Once inside the folder type ONE by ONE:
Code:
fastboot flash recovery recovery_clockwork_3.0.2.4_swift.img
fastboot -w
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
fastboot -w
fastboot reboot
THAT MY FRIEND IS A CLEAN INSTALL...
5. Once is rebooting fast login to recovery pressing POWER+HOME. Inside recovery select wipe data/factoryreset for reset the phone. Then select reboot, and that's it YOUR DONE!
NOTE: If you are flashing any ROM with data2system method then DO NOT WIPE DATA/FACTORY RESET, just reboot.
6. Set your phone as you like install all your apps and once you done reboot into recovery and go to backup & restore>> backup for create a backup of your entire phone.
[HOW-TO] Use ADB tool | Android Debug Bridge
TUTORIAL #3
You can find the adb tool in C:\<sdk>\platform-tools\ or C:\<sdk>\
*All the examples refers to /data/app path you can change to /system/app or any other path you need
Open a CMD terminal on Windows:
Start>>run>> type cmd>> click ok (WinXP)
Start>> in search box type cmd>> right click Run as Administrator (Win7)
Once opened type:
Code:
cd C:\<sdk>\platform-tools
adb devices
adb remount (from r/o to r/w)
-----------------------------------------------------
adb shell mount /system (if you only want to mount system)
adb shell mount /data (if you only want to mount data)
Installing an Aplication .apk
Put the .apk file into C:\<sdk>\platform-tools\ folder and type
Code:
adb install [B]appname[/B].apk
Uninstalling an Aplication
There is an uninstall adb commans that always shows failure!!!
So we are going to use Adb Shell:
Code:
adb shell
# cd data/app
# ls
# rm -r appname.apk
# ls
Ctrl+c to exit shell mode
You will not find this application, you just removed it!
Push & Pull commands
Pull:
Code:
adb pull /data/app/appname.apk
If you want to PULL all the files located in a folder then:
Code:
adb pull /data/app test
to pull all the .apk's located /data/app and save them into a folder that it will create in C:\Android-SDK\platform-tools named test
Push:
Code:
adb push appname.apk /data/app
If you want to PUSH all the files located in a folder then:
Code:
adb push test /data/app
to push all the .apk's located in C:\Android-SDK\platform-tools\test folder to /data/app
Close ADB
Code:
adb kill-server
exit
[How-to] Replace Files | Set permissions
TUTORIAL #4
When you need or would like to add or replace a file to our phone we need to set permissions.
In this tutorial we are going to use Root Explorer for this purpose, because is the "standar" file manager that comes with custom roms lately.
Apart of this, if you are having issues with applications for incorrect permissions then you might FIX permissions using ROM MANAGER application not RECOVERY (not recommended)
REPLACING A FILE:
in this example we are going to replace our old Music.apk for the newest Music.apk...
*Applies for replace any file
Before: After:
1. Backup your old Music.apk then uninstall it (I can do both with RootAppRemover.apk or Titanium Backup)
1. Plug your phone, mount your sdcard then download Music.zip
to your desktop
2. Put the Music.apk and libjumper.so into /sdcard/newmusic folder
3. Close the windows, unmount your sdcard, unplug your phone then go open Root Explorer application
4. Go to sdcard/newmusic/ >> press menu button >> Multi-select >> select Music.apk >> press copy button
5. Press back button and go to system/app/ >> press Mount R/W >> press Paste button
6. Look for the Music.apk you just pasted and press on it until a window pops up:
7. Select Permissions and change them to rw-r--r--
TO
It should look like this:
9. Repeat process from step 4-to-7 to replace libjumper.so but to /system/lib/ path
THANKS ARE WELCOMED!!!
[TUTORIAL] Self-Assembly of Android OS Firmware
TUTORIAL #5
* This tutorial was created for me after read from many sites and figure it out by myself and the result is a 100% fully working step by step tutorial.
* First of all you need to have installed Ubuntu then Follow this: [How-to] Set up SDK/ADB/FASTBOOT in Ubuntu 10.10
* Once everything is set and working download IMG_tools.zip then unzip in home/username/IMG_tools/
* When i mention ~/ means home/username/ but shorty
Proceed...
Extract boot. img
-To extract boot.img use extract_boot from ~/IMG_tools/boot
- Put boot.img file inside ~/IMG_tools/boot/ folder
- Open a terminal and type:
Code:
$ cd ~/IMG_tools/boot
$ ./extract_boot boot.img
- if you want to extract boot.img in another folder, for ex. in ~/ROM/ then the command is
Code:
$ ./extract_boot ~/ROM/boot.img
- You will get something like this
Page size: 2048 (0x00000800)
Kernel size: 2664916 (0x0028a9d4)
Ramdisk size: 966,485 (0x000ebf55)
Second size: 0 (0x00000000)
Board name:
Command line: mem = 214M console = tty0, 115200n8 androidboot.hardware = swift uart.mode = arm11_uart_disable crash = off
Writing boot.img-kernel ... complete.
Writing boot.img-ramdisk.gz ... complete.
3210 block
Click to expand...
Click to collapse
Rebuild boot.img
-To rebuild boot.img use make_boot from ~/IMG_tools/boot
- Double click make_boot>> show
Compare info after cmdline with Command Line after extracted boot.img, if its different then modify the file.
- Once verified info type:
Code:
$ ./make_boot boot.img
- You will now see a boot-new.img file ready for flash
Click to expand...
Click to collapse
Extract system. img
-To extract system.img use unyaffs from ~/IMG_tools/system
- Put system.img and unyaffs file inside ~/IMG_tools/system/system folder
- Open the terminal and type:
Code:
$ cd ~/IMG_tools/system/system
$ ./unyaffs system.img
- Then cut system.img and unyaffs file and put them back to ~/IMG_tools/system
Click to expand...
Click to collapse
Rebuild system. img
-To Rebuild system.img use mkfs.yaffs2 from ~/IMG_tools/system
- Do not move mkfs.yaffs2 file
- Open the terminal and type:
Code:
$ ./mkfs.yaffs2 system system.img
Click to expand...
Click to collapse
Rebuild system. img [update.zip]
* works to sign .apk too
- If you have based your work on RUU file, you’ll have to create META-INF folder with the correct information and update scripts inside. If you have unpacked someone’s .zip, the META-INF folder should be already present. Update script might mention some files in the update, so if you have removed (or added new) files, the update script should be amended to reflect those changes. Please, get a few images from different developers and try to understand the correct internal structure.
Once you have something like this:
- Open the terminal and go where your <workdir> content is: META-INF, system, boot.img then type
Code:
$ zip -r9 update.zip *
-r9 tells the program to collect files recursively and use the maximum compression. If you omit “r”, the subfolders will not be included (bad, bad idea!), if you omit “9″ nothing bad will happens, but resulting file might be about 1% larger.
- Now to sign the zip file put sign folder and androsign file from ~/IMG_tools/sign/ to ~/*SDK/tools
- Go back to the terminal and type
Code:
androsign /<workdir>/update.zip
Click to expand...
Click to collapse
Odex Files
- What are those Odex files? Answer
- How to get rid of them?
Odex files depend on framework they are made for. To deodex an odex file use that how to
Then you may create a classes.dex file by executing the smali program on the "out" folder. You then rename it to classes.dex and add it to the .apk.
- How to create them?
Use dexopt-wrapper on device.
For deodex ODEX files, use this howto
Then you can create classes.dex file by running smali from your "out". Then rename it to classes.dex and add it to apk.
Click to expand...
Click to collapse
Porting another's devices ROM
Well, this part is simple smile_good.gif
- Extract system.img
- Extract boot.img
- Replace boot.img-kernel of the original Roma HTC Hero.
- Rebuild boot.img
- Collect update.zip (see how it's done in any Custom rum for Hero)
- Sign and flash.
Device should start, and even be able to call, but probably will not work WiFi, BT, trackball.
Click to expand...
Click to collapse
[HOW-TO] Fix MD5 mismatch | Nandroid restore
TUTORIAL #6
THANKS TO ihtfp69 FROM XDA!
To fix this is assuming you did not change the folder names and let Clockworkmod create them.
Code:
Checking MD5 sums...
MD5 mismatch!
- Plug your phone to the computer
- Open a Terminal and type:
Code:
adb devices
adb shell
# cd /sdcard/clockworkmod/backup/2010-06-29.20.22.53
# rm nandroid.md5
# md5sum *img > nandroid.md5
# exit
* Substitute the final folder name for the backup you need to fix.
- Re-run the restore and everything should be fine.
NOTE: As rpearl stated, there could be something really wrong with your nandroid, so use this tutorial as a learning experience and not a fix-all. In my case, everything was fine after restoring. However, that may not always be the case. Do this with caution.
[HOW-TO] Install LG IME Full
TUTORIAL #7
- Dowload LG_IME_data2system and unzip in desktop
- Open System folder and copy the 3 folders: app, lib2 and usr folders to C:\*SDK\platform-tools\
- Plug your phone to the computer
- Open a CMD terminal and type:
Code:
cd C:\*SDK\platform-tools
adb devices
adb remount
adb push app /system/app
adb push lib2 /system/lib
adb push usr /system/usr
adb kill-server
exit
- Unplug your phone
- Go to ROM Manager application and run Fix Permissions (DO NOT avoid this step, so you dont get FC's)
DONE!
[HOW-TO] Use Fastboot tool | Bootloader
- What is fastboot?
Fastboot tool is a program used to update the flash partitions in Android devices from a host (PC) over USB.
It allows you to perform flashing images (*.img) files to your device.
_________________________________________
- How do i get in Fastboot mode?
You can boot in Fastboot mode in two ways:
1. For 2.2 / 2.3 Android ROM:
Hold the power button until a window pops up | Select reboot >> bootloader >> OK
2. For any Android ROM
Shutdown the phone >> hold CAMERA + POWER buttons
_________________________________________
- How do i know im in Fastboot mode?
After you press the combo buttons and the phone starts you be able to see the LG logo and just after that the screen will clean and turn dark-blue, nothing else. If that happens congratulations! you are in Fastboot mode.
NOTE: it has been told that in some firmwares the fastboot mode screen turns out blank. If you experience that dont panic! you might want to try another firmware with the normal fastboot mode.
_________________________________________
- Usage of the Fastboot commands
NOTE: to start using Fastboot is assuming you already have installed SDK with all the tools
1. You need to place the *.img files you are going to flash into
C:\*SDK\tools\ (Windows)
Home/username/*SDK/tools (Linux)
Click to expand...
Click to collapse
2. Plug your phone with a USB cable to your computer
3. Open a Terminal (Windows|Linux) and issue the following commands:
Code:
fastboot erase recovery
------------------------------------
fastboot flash recovery recovery_clockwork_x.x.x.x_swift.img
fastboot -w
fastboot erase boot
fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
fastboot -w
fastboot reboot
* fastboot erase recovery | use when reinstalling clockwork recovery
* fastboot -w | is for wipe data/cache and make a factory reset
[HOW-TO] Fix Russian Profile | Swiftdroid
THANKS TO tejasdj12 FOR THIS FIX
There are 2 ways to Fix Russian Profile:
METHOD #1:
Copy the profiles.xml file to /data/system folder. Reboot.
* If the first method did not work then you have a second method
METHOD #2:
1. Open Root Explorer or any other file manager
2. Find /system/build.prop file and edit these sections:
Code:
'ro.product.locale.language=ru' to 'ro.product.locale.language=en'
'ro.product.locale.region=RU' to 'ro.product.locale.region=US
3. Save the File
4. Reboot into recovery and wipe user data/factory reset. Reboot.
[HOW-TO] Change default fonts | Custom ROMs
THANKS TO sonnysekhon FROM XDA!
* Tested on CM7 ROMs | PM me if it works with/without CM6
METHOD #1: [Install zip from recovery]
1. Download the Font you like from here:
2. Mount your phone and put the .zip into SDcard/
3. Unplug your phone and reboot it into recovery.
4. After that, go to “install zip from sdcard >> choose zip from sdcard >> select your copied zip file”
5. After it installs it, select “reboot system now”
________________________________________________
METHOD #2: [Using ADB tools | Data2System by Anton_ch users]
1. Download the Font you like from here:
2. Unzip the folder to your desktop. You will see 2 folders:
META-INF
System
3. Open System folder and copy fonts folder to C:\*SDK\platform-tools\
4. Plug your phone to the computer
5. Open a CMD terminal and type:
Code:
cd C:\*SDK\platform-tools
adb devices
adb remount
adb push fonts /system/fonts
adb kill-server
exit
6. Unplug your phone. Reboot
DONE!
________________________________________________
* If you want to go back to default-fonts, download and repeat steps 2-6 from METHOD #2
[FAQ] My Phone is bricked !!! | GUIDE
THANKS TO ilovelg FROM MODACO!
So you failed to read the TUTORIAL and bricked your phone while trying to flash GT540, here is what you should try to do:
[HOW-TO] Repair your device if you see only LG logo | Nothing else happens when you boot your device
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to reflash your phone again, in the normal way.
____________________________________________
[HOW-TO] Repair your device if it feels like dead | When you click power button nothing happens (Note that this may or may not work)
Make sure you use USB ports that are in back of youre PC, dont use front ones.
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER).
If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY.
Load KDZ(ROM) and flash your phone.
If the phone failed to boot into Emergency/Download mode (VOL DOWN + POWER), launch KDZ Updater.
In TYPE dropdown menu, choose CS_EMERGENCY.
Load KDZ(ROM) and flash your phone.
____________________________________________
THANKS TO fishears FROM XDA!
[HOW-TO] Repair your device if you don't see LG logo, boot animation | Recovery doesn't show up
Download the French v20A and the out.kdz
Take out your battery, SIM and SD card
Plug USB into PC (but not phone yet)
Hold (VOL DOWN) button and plug USB into phone | *Phone goes into Download Mode
Run KDZ Updater
In TYPE dropdown menu, choose CS_Emergency mode
Load French V20A ROM and flash it
When it's finished pull out USB again and hold (VOL DOWN) and reinsert USB to put phone back in Download Mode
Launch KDZ Updater (still in CS_Emergency mode)
Load out.kdz and flash it
You should now have your boot animations back and you can flash whatever ROM you want to use.
____________________________________________
LAST RESOURCE:
If the phone still doesn't work, take your phone to local LG Warranty service or your Operator where you got the phone. Tell them that after you turned the phone off, it doesn't seem to turn back on again!
Click to expand...
Click to collapse
[HOW-TO] Change default low system sounds | Sound Scheme
THANKS TO miroslav_mm & Glay-z FROM 4PDA!
Introduction:
Sources were taken from the phones Nokia, Sony Ericsson, iPhone, HTC and others converted to a good quality and matched to the "my taste, for a full sound experience through our LG GT540 speaker! No pop, rock and techno is not here!
Also, as a bonus, was changed bootanimation(CyanogenMod 7.0) and tuned the system started for 2.1 ROMs!
- Requires ROOT
- Require recovery v3.0.2.4 +
- The installation is via recovery: Update.zip
-----------------------------------------------------------------------------
- Data2System by Anton_ch users cannot install zip from sdcard, instead replace with Root Explorer or push files with adb tool. Please take a look in the Thread to see how-to do it.
The path is:
Code:
/system/media/audio/alarms
/system/media/audio/notifications
/system/media/audio/ringtones
* In almost all the versions i've made there is not need to do this as i've already done it, only the clean versions users might use it!
Sound Scheme for LG GT540 v1.0 by miroslav_mm
* Works on firmware version 2.1 (A, B, D, Quarx) | 2.2.1 (only partially replaces the tunes as there are more than 2.1)
Were replaced by all the usual sounds of SMS, alarm clock, income calls!
update.zip (16.69MB)
Sound Scheme for LG GT540 v2.0 by Glay-z
* Works on firmware version 2.3.2 | 2.3.3 | 2.3.4
Were replaced by all the usual sounds of SMS, alarm clock, income calls, all the keys and the camera!
update3.zip (15.18MB)
Sound Scheme for LG GT540 v3.0 by Glay-z
* Works on firmware version 2.3.2 | 2.3.3 | 2.3.4
Unlike version 2.0 it does not replace the key sound but instead installed a new font
update5.zip (33.03MB)
Sound Scheme for LG GT540 v4.0 by Glay-z
* Works on firmware version 2.1 | 2.3.2 (ignore the bootanimation) | 2.3.3 | 2.3.4
Were replaced all the system sounds and added CM7 bootanimation as a bonus
update10.zip (45.34MB)
[TUTORIAL] Data2System method by Anton_ch | Custom ROM's
PREREQUISITES:
------------------------------------
* Have Ubuntu in your PC by: Live CD, installing with Wubi, installing with a Virtual Machine or if you want to give it a long try installing directly to your PC.
* Set up Ubuntu with Android-SDK tools: [How-to] Set up SDK/ADB/FASTBOOT in Ubuntu 10.10
* Once everything is set and working download IMG_tools.zip then unzip in home/username/IMG_tools/
* FLASH THE ROM/FIRMWARE YOU WANT TO MODIFY WITH THIS METHOD
INSTRUCTIONS:
------------------------------------
FIRST PART
[Rebuild the kernel with a modified init.rc]
SECOND PART
[Flash new kernel, fit system in /data, modifications]
1. Go in recovery > mounts&storage and mount / system and / data
2. Open a terminal and type:
$ cd ~/android-sdk-linux_x86/platform-tools
$ adb shell
First make sure that operation is possible:
# df
Will be a similar conclusion:
# Filesystem 1K-blocks Used Available Use% Mounted on
# Tmpfs 85908 0 85908 0% / dev
# / Dev/block/mtdblock1 65536 1160 64376 2% / cache
# / Dev/block/mtdblock4 250880 122344 128536 49% / system
# / Dev/block/mtdblock6 141 824 1156 140 668 1% / data
Size used in the /system 122,344 KB
Total size in /data partition 141824 KB
3. Hence system will fit in /data (estimate with a margin of 3-4 MB just in case)
As 122344 is < than 141824 = IT FITS! / Until 138 MB size in /system is safe to go
If it does not fit - clean /system from unnecessary:
# cd /system/app
# ls
# rm example.apk
If it fits, has more free space and you want to install apps:
# exit
Install applications of interest, here are some how-to's:
<< You can fill the partition until you get 138MB to be safe >>
[HOW-TO] Install LG IME Full
[HOW-TO] Change default fonts | Custom ROMs
[HOW-TO] Replace Files | Set permissions
[HOW-TO] Change default low system sounds | Sound Scheme
$ adb push ...
If it fits but you don't want any modification in it, then we proceed...
# exit
4. Put boot-new.img into ~/android-sdk-linux_x86/platform-tools/ folder and type:
$ adb push boot-new.img /data/
$ adb shell
# flash_image boot /data/boot-new.img
Now go to the directory /data and clean it
# cd /data
# rm -r *
On the lost + found - do not pay attention, everything is OK
Go to /system and copy all to /data
# cd /system
# cp -a * /data/
Process is not fast ... wait
Now clear the /system
# rm -r *
5. In the recovery unmount /system and /data
6. You can immediately make a backup of what happened.
I am on switdroid M5. I tried method 1 above for two different fonts and both failed with similar messages.
E:Error in /sdcard/Font_stock.zip (status 0)
Installation aborted.
[email protected] said:
I am on switdroid M5. I tried method 1 above for two different fonts and both failed with similar messages.
E:Error in /sdcard/Font_stock.zip (status 0)
Installation aborted.
Click to expand...
Click to collapse
Maybe because you have the latest recovery installed and its not compatible with that script, but try second method works for everybody anyways
EDIT: Please DO NOT POST IN HERE, LET'S KEEP THE THREAD CLEAN, PM me if you have a question or something to say.
Veronica
[HOW-TO] Create a EXT4 & SWAP partition on Windows / Linux
Thanks to pyroblazer from XDA!
*** PRINT THIS HOW-TO ***
WINDOWS
What is needed:
* gParted / Ubuntu Live CD image
* Blank CD-R / WUBI for Ubuntu
* Software to burn a .iso image
* USB cable / card reader
1) Download the stable version of gparted Live CD (.iso) from here:
http://gparted.sourceforge.net/download.php (133.6 MB)
Or download Ubuntu (.iso) Live CD, which is always good to have:
http://www.ubuntu.com/download/ubuntu/download (685,29 MB)
If you already have an Ubuntu image good for you !
2) Once downloaded Burn it using your favorite burning software (i use Ultra ISO), it will burn as bootable by default.
If you don't have a blank CD-R and want to give ubuntu a try you can install it with WUBI on windows as any other program.
3) Restart your computer and enter to the BIOS (usually by pressing F2/del) ,in boot menu change the boot order to bring your CD drive on the top and then exit saving changes with F10
4) Once your computer restarts, it will boot from the CD and you will see some weird lines on ur screen, the you'll come to a page where u have 4 options, select the 1st one.
5) Once started it will ask you for preferred language, select ur language by typing the numbers given and hit enter, after that it will again give u 3 options PRESS 0 AND HIT ENTER
-----U Will get a blurred screen now bt dont worry -------
6) Now u should have booted into gparted, wait for a dialog to open, then you would be able to see your computer's hardisks
7) Plug your phone to the pc & Turn on USB storage / put your sdcard inside a card reader and connect it to the pc
8) On the right-hand side top corner you can select to see ur SD card (dropdown list of all the storage devices connected to the PC)
9) After selecting the SD card you will see ur SD card in the main screen(along with the partitions, if any)
10) Right Click on you FAT32 SD card partition and then click Resize partition
11) A box will appear to resize the space for a new partition. Choose the size you want to make it (Just think about the size of EXT4 partition + 32 MB [recommendable] SWAP you want to give in the 'Free space following box'. Leave it as PRIMARY and then clik add.
12) Now you'll see 2 partitions, one FAT32 and the other one is unallocated, right click on the unallocated one and click new then type 32 in the free space following box, make sure its also on PRIMARY in the create as box, and then u can select any file system you want (EXT2,3,4) then click add
13) Now only 32 MB will be shown as unallocated. Right click on that and click new, don't change anything, except the file system box, select it as linux SWAP, then click add
14) Now click apply. Congratulations!!!!!!! You are done with the partitioning of your SD card!!!!
On the top left of your screen u can see an icon named as exit/turn off, click on it and then select reboot and click ok... ur pc will restart and boot to windows....
UBUNTU LINUX
What is needed:
* USB cable / card reader
The proceedment is almost the same as above, because gParted belongs to linux and Ubuntu already comes with gParted application so that means you are ready to go!
1) Plug your phone to the pc & Turn on USB storage / put your sdcard inside a card reader and connect it to the pc
2) Open Gparted > Right Click on you FAT32 SD card partition and then click Resize partition
3) A box will appear to resize the space for a new partition. Choose the size you want to make it (Just think about the size of EXT4 partition + 32 MB [recommendable] SWAP you want to give in the 'Free space following box'. Leave it as PRIMARY and then clik add.
4) Now you'll see 2 partitions, one FAT32 and the other one is unallocated, right click on the unallocated one and click new then type 32 in the free space following box, make sure its also on PRIMARY in the create as box, and then u can select any file system you want (EXT2,3,4) then click add
5) Now only 32 MB will be shown as unallocated. Right click on that and click new, don't change anything, except the file system box, select it as linux SWAP, then click add
6) Now click apply. Congratulations!!!!!!! You are done with the partitioning of your SD card!!!!
Hi all,
Here is a alternative method (faster) to root the Nexus S (I9020 and I9023), not need to flash custom recovery.
The aim of the One click root, by Paul O'Brien method is to replace the stock boot.img by a superboot.img (with su and Superuser.apk) to obtain root access.
APPLY THIS AT YOUR OWN RISK!
Intructions:
1- Prerequisites:
- USB drivers installed
- Nexus S recognised in bootloader mode
- Unlocked bootloader
For these manipulations: here (I9020T) or here (I9023 & I9020a)
2- Process
- Download the file "Build_NexusS_One-click-root.zip" corresponding to your build (very important !) : here
WARNING: GRJ22 version: issue with Bluetooth, don't use it, unless you don't care bluetooth, I will try to solve this problem.
While waiting to find a solution, just flash the stock boot.img (2.3.4) if you have the BT problem, for this:
In bootloader mode, type in the console (or terminal...): "fastboot flash boot boot.img". Bluetooth will work and you keep root access.
Click to expand...
Click to collapse
- Unzip it in a directory
- Turn On the phone in bootloader mode (by holding down the Power and Volume Up buttons)
# Windows:
Just double click "install-superboot-windows.bat" (in the extracted folder)
# Linux
- Open a terminal (Ctrl + Alt + T)
- Change directory to the extracted folder:
Code:
cd /.../"Build_NexusS_One-click-root"
- Type:
Code:
chmod +x install-superboot-linux.sh
- Then:
Code:
./install-superboot-linux.sh
# Mac
- Change directory to the extracted folder:
Code:
cd /.../"Build_NexusS_One-click-root"
- Type :
Code:
chmod +x install-superboot-mac.sh
- Then:
Code:
./install-superboot-mac.sh
Your Nexus S is now rooted !
Adapted from: http://android.modaco.com/topic/327000-07mar-gri40-colour-revert-superboot-rooting-the-nexus-s/
PS: sorry for my language.
I appreciate you trying to help but if an unlocked bootloader and drivers are required then why not just fastboot flash recovery and install the su zip in recovery. IMO this is unnecessary really.
Sent from a lounge chair on my deck.
What is the easiest and fastest ?
1- double clic on a file or
2- flash recovery + flash su.zip in recovery ?
This method isn't necessary you're right, like I said it's an alternative "method".
Chamb' said:
What is the easiest and fastest ?
1- double clic on a file or
2- flash recovery + flash su.zip in recovery ?
This method isn't necessary you're right, like I said it's an alternative "method".
Click to expand...
Click to collapse
Flash recovery + flash su zip gives you, more control I think also I'm tired of people flash ROMs and then having problems and whining about how they need step by step directions when you suggest adb to help them fix it... I mean if you are gonna mod and hack at least learn what you are doing first....
/end rant
Also yes clicking is easier but IMO installing, the drivers (which your method requires) IS the hardest part.
This worked perfectly for me. Couldn't figure out the other way of rooting but this was simple so thank-you
Sent from my Nexus S using XDA App
Bluetooth cannot be enabled anymore
After rooting the Nexus S with Android 2.3.4 with this rooting instruction I cannot enable Bluetooth anymore. When I try to enable Bluetooth it says "Turning on.." but stops after two seconds and goes back into disabled Bluetooth state.
Bluetooth worked before just fine. Why did this happen and how can I resolve it?
Log file entries when switching on BLuetooth:
Code:
DEBUG/BluetoothService(120): Bluetooth state 10 -> 11
VERBOSE/BluetoothEventRedirector(562): Received android.bluetooth.adapter.action.STATE_CHANGED
INFO/bluedroid(120): Starting hciattach daemon
ERROR/bluedroid(120): bt_enable: Timeout waiting for HCI device to come up
DEBUG/BluetoothService(120): Bluetooth state 11 -> 10
VERBOSE/BluetoothEventRedirector(562): Received android.bluetooth.adapter.action.STATE_CHANGED
This is a problem I've seen occur after the root, not with this method but it can happen apparently, some people had this issue.
But I do not know the cause, the kernel is 100 % stock.
Try this:
- delete the superboot folder (/) and the su file (/system/xbin) with a root explorer
- then reboot the phone in bootloader mode and flash the stock boot.img (2.3.4) by typing "fastboot flash boot boot.img"
Now you're unroot
- then retry the one click root
So i kind of got a situation here , i originally wanted to be rooted and have my nexus 6 non encrypted so i had unlocked and rooted my phone. After i ran the "./fastboot erase userdata" command i flashed the custom recovery again and booted into it. From there i thought i would be able to "./adb sideload" a stock custom rom non encrypted but for some reason i was having difficulty running that command. My laptop was not seeing the phone, so after about 30 min of playing around with it trying to get it to work i figured id just start over fresh. From this point i dont have an OS installed so i knew i would have to download the appropriate files for the nexus 6 so i did. I tried both methods, the "./flash-all.sh" command and flashing everything one by one rebooting the bootloader in between flashes and still kept getting this same error
fastboot(1561,0xa04aa1d4) malloc: *** mach_vm_map(size=1681293312) failed (error code=3)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
failed to allocate 1679613116 bytes
error: update package missing system.img
and now im stuck in fastboot mode at least, but cannot revert back to stock unless im missing something here. Can someone help please
AnthonyAldrete said:
So i kind of got a situation here , i originally wanted to be rooted and have my nexus 6 non encrypted so i had unlocked and rooted my phone. After i ran the "./fastboot erase userdata" command i flashed the custom recovery again and booted into it. From there i thought i would be able to "./adb sideload" a stock custom rom non encrypted but for some reason i was having difficulty running that command. My laptop was not seeing the phone, so after about 30 min of playing around with it trying to get it to work i figured id just start over fresh. From this point i dont have an OS installed so i knew i would have to download the appropriate files for the nexus 6 so i did. I tried both methods, the "./flash-all.sh" command and flashing everything one by one rebooting the bootloader in between flashes and still kept getting this same error
fastboot(1561,0xa04aa1d4) malloc: *** mach_vm_map(size=1681293312) failed (error code=3)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
failed to allocate 1679613116 bytes
error: update package missing system.img
and now im stuck in fastboot mode at least, but cannot revert back to stock unless im missing something here. Can someone help please
Click to expand...
Click to collapse
it looks like the script is looking for a file that is not in the proper directory
the flash all script has never worked for me I have always had to manually flash the images.
looks like you are on a mac since you are using the ./with the command
follow the directions below and you should get back to stock
since you are already in bootloader mode
Download the required factory image files to your computer and extract them
Create an empty directory. All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory; (it is easier this way)
Download the version of Android you want to your new directory. Make sure you are using a nexus 6 image.
Extract the files from within the .tgz file which you downloaded in step 3 using 7-zip, not WinZip or WinRAR or whatever.
Make sure you have extracted ALL the files (including extracting any files in any archives inside the .tgz file). You should have six (6) files ending with .img in the directory you created in step 1. The other files you extracted from the .tgz are not necessary;
Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt. In Ubuntu or MAC just cd to the directory.
Type in the commands into the command prompt
Make sure your computer recognizes your device by typing: fastboot devices
Flash the bootloader: fastboot flash bootloader bootloader-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the radio: fastboot flash radio radio-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the system partition: fastboot flash system system.img
Flash the data partition: fastboot flash userdata userdata.img
Flash the kernel/ramdisk: fastboot flash boot boot.img
Flash the recovery partition: fastboot flash recovery recovery.img
Erase the cache partition: fastboot format cache
Reboot: fastboot reboot
Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked.
No you can root or decrypt. Search for directions on the forum or the internet.
funny i just did this exact same thing like you instructed and was about to reply to this post saying i resolved it hahah. Thanks anyways though =), i dont understand why i was getting that though because i had every file in the same place
No worries glad you got it working
qnc said:
No worries glad you got it working
Click to expand...
Click to collapse
Also found out that you Dont do the ./fastboot erase userdate command because it puts 0s in and leaves the phone unbootable which was my root cause for my phone being stuck. Instead, after flashing the boot.IMG you do the ./fastboot partition userdata instead and it will do a factory reset and when booting it will not encrypt the phone.
qnc said:
it looks like the script is looking for a file that is not in the proper directory
the flash all script has never worked for me I have always had to manually flash the images.
looks like you are on a mac since you are using the ./with the command
follow the directions below and you should get back to stock
since you are already in bootloader mode
Download the required factory image files to your computer and extract them
Create an empty directory. All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory; (it is easier this way)
Download the version of Android you want to your new directory. Make sure you are using a nexus 6 image.
Extract the files from within the .tgz file which you downloaded in step 3 using 7-zip, not WinZip or WinRAR or whatever.
Make sure you have extracted ALL the files (including extracting any files in any archives inside the .tgz file). You should have six (6) files ending with .img in the directory you created in step 1. The other files you extracted from the .tgz are not necessary;
Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt. In Ubuntu or MAC just cd to the directory.
Type in the commands into the command prompt
Make sure your computer recognizes your device by typing: fastboot devices
Flash the bootloader: fastboot flash bootloader bootloader-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the radio: fastboot flash radio radio-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the system partition: fastboot flash system system.img
Flash the data partition: fastboot flash userdata userdata.img
Flash the kernel/ramdisk: fastboot flash boot boot.img
Flash the recovery partition: fastboot flash recovery recovery.img
Erase the cache partition: fastboot format cache
Reboot: fastboot reboot
Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked.
No you can root or decrypt. Search for directions on the forum or the internet.
Click to expand...
Click to collapse
And I was having the same issues executing the flash all command too until I opened the command in a text editor and for every command put the "./" in front and was able to execute it but this is the first time I've gotten an error. My nexus5 worked with this command no problem
worked for me but still could not decrypt
qnc said:
it looks like the script is looking for a file that is not in the proper directory
the flash all script has never worked for me I have always had to manually flash the images.
looks like you are on a mac since you are using the ./with the command
follow the directions below and you should get back to stock
since you are already in bootloader mode
Download the required factory image files to your computer and extract them
Create an empty directory. All of the files that are required, need to be in one (i.e., the same) directory. It does not matter what it is called, but all the files need to be in there, with NO subfolders. EVERYTHING needs to be extracted into this one directory; (it is easier this way)
Download the version of Android you want to your new directory. Make sure you are using a nexus 6 image.
Extract the files from within the .tgz file which you downloaded in step 3 using 7-zip, not WinZip or WinRAR or whatever.
Make sure you have extracted ALL the files (including extracting any files in any archives inside the .tgz file). You should have six (6) files ending with .img in the directory you created in step 1. The other files you extracted from the .tgz are not necessary;
Open a command prompt in the same directory (i.e., make sure you are in the same directory as your files are located). You can hold the shift key when you are in the folder in Windows explorer and right-click in a blank spot and it will open a command prompt. In Ubuntu or MAC just cd to the directory.
Type in the commands into the command prompt
Make sure your computer recognizes your device by typing: fastboot devices
Flash the bootloader: fastboot flash bootloader bootloader-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the radio: fastboot flash radio radio-some-description-number.img
Reboot: fastboot reboot-bootloader
Flash the system partition: fastboot flash system system.img
Flash the data partition: fastboot flash userdata userdata.img
Flash the kernel/ramdisk: fastboot flash boot boot.img
Flash the recovery partition: fastboot flash recovery recovery.img
Erase the cache partition: fastboot format cache
Reboot: fastboot reboot
Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the cache.
Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked.
No you can root or decrypt. Search for directions on the forum or the internet.
Click to expand...
Click to collapse
so all of this worked for me and its back up and running, but my phone still says that its encrypted
Very nice to see Y700 get it's own place on XDA! I myself had just bought the 12GB version and have been very satisfied. The tutorials and info related to this model had been very difficult to come by and mostly in other languages, so I had to do my own research and exploration. So far I was able to flash ROM and extract it's boot image for root thanks to the following tutorial (in Japanese)
boot.imgを入手できない機種でMagiskを導入する方法【DSU Loader】
Android端末のカスタマイズやRoot権限の使用が可能となる「Magisk」ですが、一部例外を除き、導入に…
smartasw.com
The boot image extraction part is trickier as Y700's roms come in GSI form. But with a workaround we can still achieve the same goal. (I heard that you can also use QFIL to do that but I haven't been able to make the tool work, so if someone else can make a tutorial that'd be great)
First you need to prepare:
- DSI-Sideloader from https://github.com/VegaBobo/DSU-Sideloader/releases
- Magisk Manager from topjohnwu's GitHub repo
- a GSI ROM with built in root permission. The one the tutorial was using: https://github.com/phhusson/treble_experimentations/releases/tag/v402 --> go download "system-squeak-arm64-ab-vanilla.img.xz" (~600MB, smallest needed to fulfill the task)
- turn on developer mode and ADB debugging. Get Google SDK platform tools ready and USB drivers installed.
Connect your Y700 to a computer. Check if ADB works.
Next, install the DSI-Sideloader app. Also extract the .xz package you downloaded above to get the .img image (should be ~1.7GB in size)
Copy the image to your Y700 tablet. Open the DSI-Sideloader app, load the image, set userdata size to default (2GB). You can leave image size unchanged.
NOTE: if you have an SD card inserted, click on "config" and check "Unmount SD", or just eject your SD card from tray. Failing to do so will result in error in the install step.
After you're done, click "Install". Once finished there will be a pop-up with commands you need to enter in the terminal of your choosing. On your computer navigate to the directory containing executables of Google SDK platform tools, fire up terminal, enter the 1st command (says non-root) as instructed, and run it.
You will see a progress bar in the drop-down notification area which will complete in a moment and prompt you to reboot. Do that from there.
After reboot you will be running the modded Project Treble ROM, with root access. It's a full fledge OS but once you shutdown / reboot you will go back to your own OS. Treat it as a LiveCD of some sort.
While still connected, turn on dev mode + ADB debugging and go back to terminal for some ADB work. Next we will be extracting boot image under the current environment, made possible by it's built-in root permission.
Run the following line by line:
Bash:
adb shell
Bash:
su
Bash:
cd /dev/block/bootdevice/by-name/
Bash:
mkdir /sdcard/backup_img
Bash:
for file in *; do
if [[ "${file}" = boot* ]]; then dd if=/dev/block/bootdevice/by-name/"${file}" of=/sdcard/backup_img/"${file}".img ; else continue ; fi
done
The 4th command creates a new directory storing extracted boot image, in our case /SD card/backup_img; and the 5th command is the meat of the entire process. It consists of 3 lines, key in one at a time and press "Enter". First line is "for...do", second is "if [[..." to "fi", third is just "done".
After some time the extracted boot image will be stored under the directory specified by the 4th command, in our case /sdcard/backup_img . They are stored in the temporary user space and once you reboot to your original OS you won't be able to access them again. So you need to turn on File Transfer mode, go to the actual directory on your PC and move them to your computer. They have the filenames "boot_a.img" and "boot_b.img" . After you're done, just reboot as usual and you'll get into your old OS.
Now you have the boot images, all that's left is to use Magisk Manager to patch them, enter fastboot mode, and flash the patched images using the following commands:
fastboot flash boot_a patched_img_A.img
fastboot flash boot_b patched_img_B.img
(Rename as needed)
And now your Y700 is rooted.
The linked Japanese webpage also talks about working Android 12 / 13 GSI flavors, patches, and ways to set up your Y700.