Database Develop

[Solved] LG PC Suite does not detect correct firmware version for OTA

I'm really stumped on this one so I hope someone can help.
It started when the v10d update was pushed via PC Suite last night. So I went ahead and happily updated it. Rooting it immediately and removing certain LG apps that I've always removed (including LGHome, LG IME, etc.)
1st major problem happened when I tried to go into recovery (vol down + power), only to remember that I haven't reinstall CWM yet. An LG progress bar appeared, and a full wipe commenced.
That issue was fixed with a Smartflash to an open Euro v10c ROM.
I have now restored to my stock v10b ROM, but when I connect to PC suite, it's telling me that I'm on v10d and there are not updates available! I've tried uninstall/reinstalling PC suite. Even restarting the phone. But I am still stuck with the same message.
I'd like to go through the OTA update again since it saved all my apps and it was (well kinda) hassle-free.
Help?

Delete the drivers & pc suite from the pc, then reinstall and reconnect, it did the job for me
It is important to remove all the lg stuff from your computer...
Sent from my LG-P990 using XDA App

XT69 said:
Delete the drivers & pc suite from the pc, then reinstall and reconnect, it did the job for me
It is important to remove all the lg stuff from your computer...
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
A.... now drivers I didnt remove. Will try it now. Thanks for the reply mate.

I removed both PC Suite and LG United Drivers, same thing though, it's telling me that my current v10b is up to date. When I just received a v10d update yesterday.

TrymHansen helped me get a solution.
Just flash an older BB! As we know, nandroids don't touch the BB partition, and apparently, that is where LG PC Suite is looking at. I downgraded my BB to 0405, and LG is now telling me to update again.

My BB is 0405, but still it wont tell me that ugrade is avaible :S
Please help me

my bb also 0405 and its telling me its up to date
solution, anyone???

I've flashed new BB manually
No other way found.

strange issue here as well,
in the tool i am getting v10c but my phone has v10b the drivers are o.k but still i get this strange issue. i have flashed the BB manually to june but i cannot get the official stock update, also when i check ota it says its the last. should i jsut flash manually?
i dont want to loose all the stuff in the phone.

DeMar27 said:
I've flashed new BB manually
No other way found.
Click to expand...
Click to collapse
do i need to root the phone if i want to flash BB only, and does new BB makes call quallity better...thanks...

nencak said:
do i need to root the phone if i want to flash BB only, and does new BB makes call quallity better...thanks...
Click to expand...
Click to collapse
You don't need root to flash bb use smartflash for this. According to my tests with bb it sometimes fixes the quality of the call nd reduces battery usage but some don't I got new bb + new til this morning form the forums and now its works really great
Give it a go
Sent from my LG-P990 using XDA App

shpapy said:
You don't need root to flash bb use smartflash for this. According to my tests with bb it sometimes fixes the quality of the call nd reduces battery usage but some don't I got new bb + new til this morning form the forums and now its works really great
Give it a go
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
thanks a lot, i think i saw some post with instruction and software needed to do the job...

Here. It is http://forum.xda-developers.com/showthread.php?t=1008070
Enjoy
Sent from my LG-P990 using XDA App

Here.......All d firmwares..download the one you need n use smartflash to flash it..
http://forum.xda-developers.com/showthread.php?t=1035041

Hey thanks but this is euro open c
But I was explained that c is the last for euro open I also flashed new bb & ril
Sent from my LG-P990 using XDA App

[Q] Problem with updating LG Optimus 4xHD

Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance

strange
Jouzofski said:
Hello
I recently got Optimus 4x HD and I was trying to upgrade software (now I have V10a) over the internet via PC suite and over the mobile phone...Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
is there a solution of this problem?
how to register a product? over local version od lg.com or what? if thats the solution, I cant register my product because it's not listed yet in devices in my local lg.com
if someone knows the solution, please...I need help
thanks in advance
Click to expand...
Click to collapse
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.

alekthefirst said:
That is strange. I took my phone right out of box with v10a, right away it updated to v10b, so to v10d and then to v10f. I didnt register or anything at all.
Click to expand...
Click to collapse
well I know...there is no answer over the google either...no one has this kind of problem
I will keep searching

Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.

muellersmattes said:
Have you tried to directly flash a .kdz file? That should help, as your device came with 10a it should be a normal one and no developer.
Click to expand...
Click to collapse
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942

Jouzofski said:
I havent tried it yet...I will today when I come home...
I was researching a little...
how can I be sure that phone is not developer edition?
I got that phone for free from a cousine working in local lg office... he was saying that it's the final version...
there is a encription on the back of the model NOT FOR SALE...so that means it a developer edition, or not?
ofcourse, software is version v10a....
maybe it's not registred for sale so it wont update?
I found some tutorial, does someone know will that help and could I brick it this way? http://forum.xda-developers.com/showthread.php?t=1861942
Click to expand...
Click to collapse
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!

RuedasLocas said:
If you'll try the normal flash, you'll brick it almost for sure.
By that method you'll be able to flash it.
Pay attention to the tutorial before you start!
Click to expand...
Click to collapse
I did everything as in the tutorial...but I stopped at step 8...
I am using win 7, 64 bit edition and I connected to my laptop win xp 32 bit edition, I manage to install everything, but when I connect phone (vol up and usb cable) the computer never finds omap4430...when I look at device manager i get a new hardware for about 3 seconds and then everything dissapears...
I don't undestrand...
does it maybe has to be win 7 and 32 bit operational system or something else...
tnx anyway

Jouzofski said:
Each time I have problems, my mobile phone says that my phone is not registred and PC suite says that there is a problem and cant upgrade...
Click to expand...
Click to collapse
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone

blumenkasten said:
I got the same Message when I tried to check for updates. On my phone the solution was to enable OTA in the hidden menu.
Hidden Menu
WLAN Test
OTA Setting
Enable
Restart phone
Click to expand...
Click to collapse
I just tried it but no helpo for me here...thanks anyway

Jouzofski said:
I just tried it but no helpo for me here...thanks anyway
Click to expand...
Click to collapse
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck

RuedasLocas said:
As far as I know, the flash method for developers phones must run in 32bit system.
About retail phones, just try to download the KDZ version you want to and flash it with the normal methode.
Good luck
Click to expand...
Click to collapse
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...

Jouzofski said:
I tried everything for updating like developer and didn't succeded...then i decided to risk and tried it with the normal methode and it worked...
Click to expand...
Click to collapse
Maybe even without sucess, when you flash by the "development way" (let's call it like that for now...), you overwrite the file system allowing to perform the normal flash after that.
Good for you.

Having a hard time updating my thrill 4G

I just got the thrill 4G and it still has 2.2.2 on it. Well I tried to update it via the phone and it said there is no software update available. So I downloaded the LG update tool and had countless problems such as problem with communication between cell phone and PC. I got it to go once but it keep getting stuck at 8% everytime I try to update it. I downloaded the LG flash tool and followed the instructions properly and got it to go however It still stuck at 8%. Is there any help for me or anyway to update this thing to 2.3.5. I really want thing to update but it just won't. Can someone please help me or walk me through

25 views but no replies. Does anyone have a answer as to why this is happening. I'm about ready to throw this stupid thing against my wall!!!!!!!!!!!!!!!

stryboy314 said:
25 views but no replies. Does anyone have a answer as to why this is happening. I'm about ready to throw this stupid thing against my wall!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hello. Are you trying to upgrade from froyo to gingerbread? There are a few devs that have tools and the components to upgrade. First try acidhazardrom.com. than I think xbsall may have some forums.
Sent from my LG-P925 using xda premium

Yes I am trying to update to gingerbread however its not going as planned. Thank you I'm going to try that website out and report back here with the results

Ok I went there and it was telling me the same thing that I have been trying to do for the past few days. Any other options or suggestions that I could try?

http://forum.xda-developers.com/showthread.php?p=22417769
Sent from my LG-P925 using xda premium

Also if the LG updater tool from lg fails you may want to try to uninstall the drivers and reboot PC, than reinstall the drivers and reboot PC again. As well, you may want to try a different USB port or even a different computer. These are all things you may have to try. But the link above may just do the trick.
Sent from my LG-P925 using xda premium

Thanks I'll definitely check it out and report back here with the results

Unfortunately I will have to try a different computer. Thanks for all your help I really appreciate it!

The problem is when it launches it gets the update part then it stops at 8 percent and it doesnt go any further. Then I get a error saying that I am low on virtual memory and windows will increase something and requests from applications will be denied.

Ok so I tried a different computer and it worked! Thanks a lot!!!

stryboy314 said:
Ok so I tried a different computer and it worked! Thanks a lot!!!
Click to expand...
Click to collapse
you need to look in the optimus 3d thread its the same phone theres an official ics rom im running it now

Cannot find a working link for LG Flash Package, Please Help!

None of the links on acidhazardrom will allow me to downoad anything. It just returns a solid white page with This ID Doesn't Exist!.
I need to find a link for this to flash the new ICS update can anyone help?

Getting the same thing here. Looking through google search results for it as well and most of the links go into virus warehouses.

There is a download at the bottom of this post. Try it maybe.
http://forum.xda-developers.com/showthread.php?t=2191698
Sent from my NookTablet using xda app-developers app

billy8362 said:
There is a download at the bottom of this post. Try it maybe.
http://forum.xda-developers.com/showthread.php?t=2191698
Sent from my NookTablet using xda app-developers app
Click to expand...
Click to collapse
thats not the pack

coolshah said:
thats not the pack
Click to expand...
Click to collapse
I found a working executable from this page: http://www.lg-phones.org/how-to-fix-a-bricked-lg-optimus-3d.html My antivirus also detected a virus in one of the files. Be careful if you get it....
I never got the LG Flash Tool to work. I couldn't get the proper USB interface to show up from my phone. I ended up using Smart Flash Tool from this post: http://forum.xda-developers.com/showthread.php?t=1448803
To go into more detail about my issue, my phone was hard bricked, would only come on for a split second. I used fastboot to get it into download mode, and then Smart Flash to load ICS directly. All is well now except my IMEI number somehow got borked.
Hope this helps!

LG P925 Not Starting
PyroTech76 said:
I found a working executable from this page: http://www.lg-phones.org/how-to-fix-a-bricked-lg-optimus-3d.html My antivirus also detected a virus in one of the files. Be careful if you get it....
I never got the LG Flash Tool to work. I couldn't get the proper USB interface to show up from my phone. I ended up using Smart Flash Tool from this post: http://forum.xda-developers.com/showthread.php?t=1448803
To go into more detail about my issue, my phone was hard bricked, would only come on for a split second. I used fastboot to get it into download mode, and then Smart Flash to load ICS directly. All is well now except my IMEI number somehow got borked.
Hope this helps!
Click to expand...
Click to collapse
Hello,
I have LG Thrill P925 at&t, I updated it to 4.0 with help of Lg Support Tool. but after updation it goes dead, now it isnt booting up only vibrates..
i tried lg flash tool from win7 /xp , did all but it just stops after 50 % flashing.. Any idea?

Thanks for nothing all with a whoping140 views

I'll gladly leave lg g4 forum been the most un helpful experience ever between 140 views on both threads ..and even from the most recognized devs with nothing but simplistic answers and guides that ive read already yet the needed answers are known ..... must be considered extra work to explain and help out with my indepth matter .The minute you run across a forum with someone who had this issue almost exactly they say oh edit...fixed now .
But the most stupidest of questions can get answered on here .
Had to waist money on a nexus 5x all cause no one can explain how this great Lg up tool works but apparently it is a botched process if your device shows as Unknown model with no fix no in depth explanation Lg bridge does not work for a true soft brick it only meant to upgrade a device that actually as a bootable O.S
So where does that leave me
Sent from my Nexus 5X using XDA Free mobile app

Did you post your issue in the official LG UP thread or in the back to stock marshmallow kdz thread where the file that you need to get this back to stock using LG Up is listed. If you would have searched in the kdz back to stock thread you would have seen that another user helped me with the exact same issue ss you. Was ready to turn my phone in for warranty before finding my answer there. Your phone is still able to boot into recovery manually but you have to do it a few times then you install a rom that's saved on your sd card and your phone will boot up. Hopefully you still have your G4 and can try this method.
Sent from my LG-H811 using Tapatalk

srod562 said:
Did you post your issue in the official LG UP thread or in the back to stock marshmallow kdz thread where the file that you need to get this back to stock using LG Up is listed. If you would have searched in the kdz back to stock thread you would have seen that another user helped me with the exact same issue ss you. Was ready to turn my phone in for warranty before finding my answer there. Your phone is still able to boot into recovery manually but you have to do it a few times then you install a rom that's saved on your sd card and your phone will boot up. Hopefully you still have your G4 and can try this method.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Really I'm thinking not explain to me how my lg g4 phone can boot into recovery manually when i relocked the boot loader through adb.
All I have is down load mode No regular O.s boot no fast boot mode
Its all secure boot error 1003
I download the kdz 20i from auto primes code fire link that's the only kdz for 20i around .
The issue is lg up tool sees my device as Unknown model because I was on a ROM when this happened apparently there's no fix unless you can boot into the O.s and edit the ROM
Sent from my Nexus 5X using XDA Free mobile app

srod562 said:
Did you post your issue in the official LG UP thread or in the back to stock marshmallow kdz thread where the file that you need to get this back to stock using LG Up is listed. If you would have searched in the kdz back to stock thread you would have seen that another user helped me with the exact same issue ss you. Was ready to turn my phone in for warranty before finding my answer there. Your phone is still able to boot into recovery manually but you have to do it a few times then you install a rom that's saved on your sd card and your phone will boot up. Hopefully you still have your G4 and can try this method.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
What do you mean a few times power and volume down and release power and press it again then choose wipe with YES
Yea I tried all that its secure boot error because my boot loader is re-Locked while I was rooted and with twrp
Sent from my Nexus 5X using XDA Free mobile app

I'm wanting to believe that I need to just forget I have the g4 and break it in 3 half's and toss it
So the headache goes away
Sent from my Nexus 5X using XDA Free mobile app

androidddaaron said:
I'll gladly leave lg g4 forum been the most un helpful experience ever between 140 views on both threads ..and even from the most recognized devs with nothing but simplistic answers and guides that ive read already yet the needed answers are known ..... must be considered extra work to explain and help out with my indepth matter .The minute you run across a forum with someone who had this issue almost exactly they say oh edit...fixed now .
But the most stupidest of questions can get answered on here .
Had to waist money on a nexus 5x all cause no one can explain how this great Lg up tool works but apparently it is a botched process if your device shows as Unknown model with no fix no in depth explanation Lg bridge does not work for a true soft brick it only meant to upgrade a device that actually as a bootable O.S
So where does that leave me
Sent from my Nexus 5X using XDA Free mobile app
Click to expand...
Click to collapse
I actually posted my solution in the 20I thread relatively early. I am sorry no one helped you sooner.
If you used an iternational Rom and have an unrecognized model LGBridge is able to update your phone through update error recovery.

Vseprz said:
I actually posted my solution in the 20I thread relatively early. I am sorry no one helped you sooner.
If you used an iternational Rom and have an unrecognized model LGBridge is able to update your phone through update error recovery.
Click to expand...
Click to collapse
0fx
This is impossible lg bridge is not a semi brick or full brick fix tool its a upgrade tool from what I see
lts for a device that's in a bootable operating state allowing firmware upgrade .
It can only read in a device in mtp mode If you only have download mode that doesn't help at all Withp lg bridge The unknown device model issue is only seen with the Other tool Caller Lg up.
I go on and on and on and noone takes my exact scenario and breaks it down .
Sent from my Nexus 5X using XDA Free mobile app

androidddaaron said:
0fx
This is impossible lg bridge is not a semi brick or full brick fix tool its a upgrade tool from what I see
lts for a device that's in a bootable operating state allowing firmware upgrade .
It can only read in a device in mtp mode If you only have download mode that doesn't help at all Withp lg bridge The unknown device model issue is only seen with the Other tool Caller Lg up.
I go on and on and on and noone takes my exact scenario and breaks it down .
Sent from my Nexus 5X using XDA Free mobile app
Click to expand...
Click to collapse
Did you even try it? My phone was in the 1003 boot error with unknown model in LGUp. I only had download mode. Give it a shot before you dismiss it.

Vseprz said:
Did you even try it? My phone was in the 1003 boot error with unknown model in LGUp. I only had download mode. Give it a shot before you dismiss it.
Click to expand...
Click to collapse
I did once I couldn't get bridge to connect with update recovery error
Then difference here is was you boot loader relocked or still unlocked mine is re locked in this state
Sent from my Nexus 5X using XDA Free mobile app

androidddaaron said:
I did once I couldn't get bridge to connect with update recovery error
Then difference here is was you boot loader relocked or still unlocked mine is re locked in this state
Sent from my Nexus 5X using XDA Free mobile app
Click to expand...
Click to collapse
Actually my bootloader was locked at the point I used LGBridge.
Not being able to connect suggests driver problems. Reload them and try again.

Vseprz said:
Actually my bootloader was locked at the point I used LGBridge.
Not being able to connect suggests driver problems. Reload them and try again.
Click to expand...
Click to collapse
So you had twrp plus rooted and relocked boot loader all before attempting lg bridge that's my exact scenario but what about bridge trying to install then Lg bridge AIR Drivers
Sent from my Nexus 5X using XDA Free mobile app

Vseprz said:
Actually my bootloader was locked at the point I used LGBridge.
Not being able to connect suggests driver problems. Reload them and try again.
Click to expand...
Click to collapse
No that's not true I guarantee you wasn't
Relocked boot loader u couldn't have been
I am for sure about this and lg bridge sees my device when I choose update recovery error it tells me there are No update errors that can be recovered
So how does that prove it fixed yours when we was in the same scenario?
Sent from my Nexus 5X using XDA Free mobile app

androidddaaron said:
No that's not true I guarantee you wasn't
Relocked boot loader u couldn't have been
I am for sure about this and lg bridge sees my device when I choose update recovery error it tells me there are No update errors that can be recovered
So how does that prove it fixed yours when we was in the same scenario?
Sent from my Nexus 5X using XDA Free mobile app
Click to expand...
Click to collapse
I made a mistake when upgrading my phone from LP to MM and accidentally left my Bootloader locked when trying to upgrade, nearly bricking my phone. I was receiving a 1003 error every time I tried to boot. I posted this in a different thread last month for someone else who had the same problem.
I had this exact same issue when upgrading my phone. Didn't do it correctly and it took me about 3 hours before I got my phone working again. It was about a week ago on another computer, but I'll try to recall what I did when it finally clicked in my mind.
Download H81120i_00_0201.kdz flashable zip from here (1.6GB Feb-04-16):
http://downloads.codefi.re/autoprime.../H811/H81120i/
Download LGUP and install it. I used the DropBox link in this thread:
http://forum.xda-developers.com/g4/h...mm-lp-t3249803
Remember to install the LGUP_8994_DLL file BEFORE LGUP_Install
Download and install LG Bridge (for the USB drivers) here:
http://www.lg.com/uk/support/pc-suite
Select the LG 815 model, the drivers will work. I only used the LG Bridge to install the USB drivers. Nothing else.
OK, now here's where your phone comes in.
Step 1: Turn off your phone (pull the battery if you must, but put it back in).
Step 2: Hold the VOLUME UP button and plug the USB cable into your PC. This puts your phone into DOWNLOAD MODE.
Step 3: On your PC, open up LGUP. The program shoud recognize the phone as H811 in COM3 or COM4. Highlight it and click the SELECT button.
Step 4: Under the "Process" row, select UPGRADE
Step 5: Click the blank space under File Path, it will pop up a [...] [X] at the end. Click the [...].
Step 6: Select the H81120i_00_0201.kdz and click on Start. The program will push the STOCK H811 MM ROM to your phone. This will bring your phone out of Brick mode, but you will have to go through the entire rooting process again.
Click to expand...
Click to collapse

Donut42 said:
I made a mistake when upgrading my phone from LP to MM and accidentally left my Bootloader locked when trying to upgrade, nearly bricking my phone. I was receiving a 1003 error every time I tried to boot. I posted this in a different thread last month for someone else who had the same problem.
Click to expand...
Click to collapse
Once again I was on a ROM when in did all this if it wasn't for that fact Lg Up would see my device model as h11 not unknown
So tell me how to get past the Unknown device model issue due to bring on a Custom Rom when this happened
Sent from my Nexus 5X using XDA Free mobile app

Donut42 said:
I made a mistake when upgrading my phone from LP to MM and accidentally left my Bootloader locked when trying to upgrade, nearly bricking my phone. I was receiving a 1003 error every time I tried to boot. I posted this in a different thread last month for someone else who had the same problem.
Click to expand...
Click to collapse
The issue lies in step 3
The phone doesn't recognize as h811 it is as unknown model
If you know a way around that I'd love to know because every day I Go to snap the phone in half and recycle it as trash I stop my self thinking maybe one person will get that I was on a ROM when this happened and have a solution for Lg up to see my device as h811
Sent from my Nexus 5X using XDA Free mobile app

androidddaaron said:
The issue lies in step 3
The phone doesn't recognize as h811 it is as unknown model
If you know a way around that I'd love to know because every day I Go to snap the phone in half and recycle it as trash I stop my self thinking maybe one person will get that I was on a ROM when this happened and have a solution for Lg up to see my device as h811
Sent from my Nexus 5X using XDA Free mobile app
Click to expand...
Click to collapse
That sounds like a driver issue. When I did mine I was also on a custom ROM. I had to manually remove all LG drivers via the Device Manager and install the LG Bridge for its LG USB drivers before the LGUP tool would recognize it. Before I did that it wouldn't even see my phone.

Donut42 said:
That sounds like a driver issue. When I did mine I was also on a custom ROM. I had to manually remove all LG drivers via the Device Manager and install the LG Bridge for its LG USB drivers before the LGUP tool would recognize it. Before I did that it wouldn't even see my phone.
Click to expand...
Click to collapse
I would like to think that butt LG up is evidently seeing a connection from my phone to the PC it's just reading the device model as unknown because if I unplug the phone it goes back to reading nothing I plug it back in pops up red box model unknown I know it's reading the phone in LG up because it actually tells you the ROM it detects which is Xtreme ROM by micro mod
Not only that LG Mobile support tool read my phone and says software is up-to-date LG flash tool 2014 attempts to flash but fails because it is not compatible apparently with Android 6.0
Nlg bridge when I try to use that tool sees my phone when I choose update recovery error and says there are no recoveries to update I don't believe it's a driver issue I think it's the fact that I'm stuck on a ROM that is edited in some fashion that will not allow the tool to to proceed to the next step and if you look at the LG up thread it talks about a member explaining about the unknown device model issue is due to the ROM developer editing his ROM name somehow
Everyone that has gotten past the unknown device model happen to have an unlocked bootloader or was just trying to do a regular upgrade and still had an OS to boot into there's just no way around this mess
Sent from my Nexus 5X using XDA Free mobile app

Guess this thread has run its course
Closed at OP's request